Benutzeranleitung / Produktwartung RF365PXX des Produzenten Whirlpool
Zur Seite of 28
ELECTRIC RANGE Self-Cleaning Models ;;;;R;g (Shown) RF361 PXX ihen. Clothes Dryers Freezen. Relrigeralor-Freezer, Ice Makers. D~shuashers Built-In Ovens and Surface Units.
Contents Page BEFORE YOU USE YOUR RANGE. 2 IMPORTANT SAFETY INSTRUCTIONS. 3 PARTS AND FEATURES. 5 USING YOUR RANGE. 6 Using the Surface Units. 6 Optional Canning Kit 7 Setting the Clock 8 Using the Minute Timer. 8 Using the Oven Controls 9 Baking 9 Adjusting the Oven Temperature Control 10 Broiling .
IMPORTANT SAFETY INSTRUCTIONS B Read all instructions before using the range. l Install or locate the range only in accordance with the provided Installation Instructions. It is recom- mended that the ran e be in- stalled bv a aualifie ? installer. The ran 3 e mist be properly con- net ed to electrical supply and arounded.
l Turn pan handles inward, but not over other surface units. This will help reduce the chance of burns, igniting of flammable materials, and spills due to bumping of the pan. l Do not soak removable heating elements in water. The element will be damaged and shock or fire could result.
Parts and features Models RF375PXX [Shown), RF365PXX & RF36lPX.X AUTOMATIC OVEN LIGHT OVEN MEALTIMER’” SWITCH SELECTOR SURFACE UNIT CLOCK/ MARKER 1 MINUTE TIMER I OVEN TEMPERATURE I RIGHT FRON.
Using your range Using the Surface Units 1 4 Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF. Surface Unit Markers The solid dot in the surface unit marker shows which surface unit is turned on by that knob.
Use only flat-bottomed utensils for best cooking results and to prevent damage to the cooktop. Specialty items with rounded or ridged bottoms [woks, ridged bottom canners or tea kettles] are not recommended.
Setting the Clock Push in and turn the Minute Timer Knob to set the Clock. 1. Push in Minute Timer Knob and turn clockwise until clock shows the right time of day. 2. Let the Minute Timer Knob pop out. Turn clockwise until Minute Timer hand points to OFF.
Using the Oven Controls Baking 1. Position the rack(s) properly before turning on the oven. To change rack position, lift rack at front and pull out. The rack(s) should be placed so the top of the food will be centered in the oven. Always leave at least IYz to 2 inches (4-5 cm] between the sides of the pan and the oven walls and other pans.
Adjusting the Oven Temperature Control Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without your noticing the change. Your new oven is properly adjusted to provide accurate temperatures.
Broiling 1. Position the rack before turning the oven on. See “Broil Chart” in the Cooking Guide or a reliable cookbook for recommended rack positions. 2. Put the broiler pan and food on the rack. 3. Close the door to the Broil Stop position (open about 4 inches, 10.
Using The Automatic MEALTIMER’” Clock The automatic MEALTIMER’” Clock is designed to turn the oven on and off at times you set, even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven, such as meats and casseroles.
To start baking now and stop automatically: 1. Position rack(s) properly and place food in the oven. 2. Make sure the clock is set to fhe right time of day. 3. Push in and turn the Stop Time Knob clockwise to the time you want the oven to shut off. Make sure the Start Time Knob is out.
The Storage Drawer The storage drawer is for storing pots and pans. The drawer can be removed to make it easier to clean under the range, and to check for installation of the anti-tip bracket. Use care when handling the drawer. Removing the storage drawer 1.
Optional Door Panel Pat (Models RF375PXX & RF365PXX) If you would like to change the color of your oven door glass to white or almond, you can order one of these kits: White (Kit No. 814069) or Almond (Kit No. 814070) from your Whirlpool Dealer. The kits include easy installation instructions.
Surface Units and Reflector Bowls Removing Burn and Electrical Shock Hazard Make sure all surface units are OFF before removlng surface units and reflector bowls. Failure to do so can result in burns or elec- trical shock. 1. Turn off all surface units.
Replacing Burn, Electrical Shock and Fire Hazard l Make sure all surface units are OFF before replaclng surface units and burns or electrical shock. l Do not line the reflector bowls with foil. Fire or electrical shock 1. Turn off all surface units. 3.
Lift-Up Cooktop 1. Lift front of cooktop at both front corners until the support rods lock into place. Personal Injury and Product Damage Hazard l Be sure both support rods are fully extended and in the locked position. Failure to do so could result in personal injury from the cooktop accidentally falling.
4. If you want the oven racks to remain shiny, remove from the oven and clean by hand. Otherwise, put oven racks on second and fourth guides (guides are counted from bottom to top). After racks are cleaned in the Self-Cleaning cycle, they become harder to slide.
Setting the Controls Be sure the kitchen Is ventilated during the Self-Cleaning cycle. This will help heat, odors and smoke to disappear from the room as quickly as posslble. 1. Set the Oven Selector and Oven Temperature Control to CLEAN. 3. Push in and turn the Stop Time Knob clockwise 2 or 3 hours.
Special Tips l Keep the kitchen well ventilated during the Self-Cleaning cycle to help get rid of heat, odors and smoke. l Clean the oven before it gets heavily soiled.
Cleaning Chart PART Exterior surfaces WHAT TO USE Warm soapy water and a soft cloth. Non-abrasive plastic scrubbing pad for heavily-soiled areas. HOW TO CLEAN l Wipe off regularly when range is cool. l Do not allow food containing acids (such as vlnegar, tomato, lemon juice or milk) to remain on surface.
The Oven Light The oven light will come on when you open the oven door. To turn the light on when the oven door is closed, push the Oven Light Switch on the control panel.
If you need service or assistance, we suggest you follow these steps: 1. Before calling for assistance... Performance problems often result from little things you can find and fix without tools of any kind. If nofhlng operates: l Is the power supply cord plugged into a live circuit with the proper volt- age? (See Installation Instructions.
3. If you need service%. Whirlpool has a nationwide net- work of autho- nzed WhirlpoolSM service compa- nies. Whirlpool service technicians are trained to fulfill the product warranty and pro- vide after-warranty service, any- where in the United States.
Notes 26.
Notes 27.
r WHIRLPOOL’ RANGE PRODUCT WARRANTY LENGTH OF WARRANTY 1 WHIRLPOOL WILL PAY FOR EROOl 1 FULL ONE-YEAR WARRANTY FSP@ replacement parts and repair labor to From Date of Purchase correct defects in materials or workmanship. Service must be provided by an authorized WhirlpoolSM service company.
Ein wichtiger Punkt beim Kauf des Geräts Whirlpool RF365PXX (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Whirlpool RF365PXX noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Whirlpool RF365PXX - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Whirlpool RF365PXX reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Whirlpool RF365PXX erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Whirlpool RF365PXX besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Whirlpool RF365PXX verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Whirlpool RF365PXX. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Whirlpool RF365PXX gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
