Benutzeranleitung / Produktwartung BE814 des Produzenten Belling
Zur Seite of 28
BE814 Fully Integrated Freezer INST ALLA TION AND USER INSTRUCTIONS Y ou must read these instructions prior to using the appliance and retain them for future reference.
.
Contents Introduction & safety warnings ...........................................................................2 Electrical requirements ......................................................................................3 T ransportation instructions .
Congratulations on your choice of a Belling quality Appliance which has been designed to give you service for many years. W ARNING ! IMPORT ANT ! DO NOT connect your appliance to the electricity supply until all packing and transit protectors have been removed.
3 ELECTRICAL REQUIREMENTS Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply . Rating label is on the left hand side of freezer inner liner .
TRANSPORT A TION INSTRUCTIONS 1. The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation. 2. If during the course of transport the appliance has to be transported horizontally , it must only be laid on its left hand side when standing in the front of the appliance.
1. T o avoid a hazard due to instability of the appliance, it must be fixed in accordance with the instructions. 2. Do not operate this appliance unless installed to furniture. 3. The appliance should be located on a smooth surface. The four front and back feet can be adjusted as required.
6 REPOSITIONING THE DOOR Follow the step by step instructions and the diagram below . Numbers in brackets refer to diagrams. 1 2 1 2 4 3 8 7 5 6 8 7.
7 1. Switch off at the socket outlet and pull out the mains plug. 2. Remove all food, loose items and fittings from inside the appliance and door shelves. 3. Unscrew the bolts and remove the upper and bottom hinges from the cabinet and door . (1) (2) 4.
ST ARTING Final Check Before you start using the freezer check that: 1. The feet have been adjusted and the product is level. 2. The interior is dry and air can circulate freely at the rear . 3. Clean the interior as recommended under "CLEANING AND CARE.
9 STORING FROZEN FOOD Prepacked commercially frozen food should be stored in accordance with the frozen food manufacturer's instructions for a frozen food storage compartment.
FREEZING FRESH FOOD Freezing capacity of your appliance in a 24 hours period is 10 kg (22.1 lb). Never exceed this maximum capacity . Fast freeze compartment (3) is shown in diagram.
1 1 DEFROSTING Defrost twice a year or when a frost layer of around 7 mm (1/4") has formed. T o start defrosting procedure turn the thermostat knob to zero position (Alternatively you may switch off the freezer at the socket outlet and pull out the mains plug.
12 CLEANING AND CARE ** We recommend that you switch of f the freezer at the socket outlet and pull out the mains plug before cleaning. ** Never use any sharp abrasive instrument, soap, household cleaner , detergent and wax polish for cleaning. ** Use luke warm water to clean the cabinet of the freezer and wipe it dry .
13 DO'S AND DON'TS Do- Check contents of the freezer at regular intervals. Do- Clean and defrost your freezer regularly (See "Defrosting") Do- Keep food for as short a time as possible and adhere to "Best Before", "Use By" dates.
14 INST ALLA TION INSTRUCTIONS - DET AILED STEP BY STEP NOTE 1) Height of the product can be adjusted by the help of adjustable feet (front and back) to fit the furniture niche height (B). 2) Do not operate this appliance until it has been installed in the furniture.
15 min.550 B min. 600 min.550 C C 600 D > 150 mm. C D C=100-150 mm.
16 2 7 1 3 4 5 6 3 4 5 6.
17 Note: 1. These dimensions are valid for products,which are hinged on right hand side. 2. When door opening direction is reversed, mirror image of this instruction should be considered. That is, dimensions should be considered for opposite sides. B E E = 1,5 mm is recommended.
18 10 11 12 13 14.
19 15.
20 GUARANTEE DET AILS Y our new Belling product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • Repairs necessary as a result of faulty materials, defective components or manufacturing defect.
21 Recycling This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment.
PERFORMANCE Energy efficiency class Energy consumption - Kwh/year Net storage - vol fresh food ltrs (cu.ft.) Net storage - vol frozen food ltrs (cu.ft) T otal net vol - ltrs (cu.ft.) Frozen food compartment rating Conservation time from failure Freezing capacity fresh food - kg /24 hrs.
23 WIRING DIAGRAM.
.
.
In case of dif ficulty within the UK, please call Belling Customer Care Centre Helpline on 08 44 815 3746 When you dial this number you will hear a recorde d message and be given a number of options. This indicates that your call has been accepte d and is being held in a queue.
Ein wichtiger Punkt beim Kauf des Geräts Belling BE814 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Belling BE814 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Belling BE814 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Belling BE814 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Belling BE814 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Belling BE814 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Belling BE814 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Belling BE814. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Belling BE814 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
