Benutzeranleitung / Produktwartung TX-52H480S des Produzenten Westinghouse
Zur Seite of 51
USER’S MANUAL MANUEL DE L ’UTILISA TEUR MANUAL DEL USUARIO TX-42F430S TX-47F430S TX-52H480S 1080p HDTV TVHD 1080p.
1 If you have any questions or concerns, Please call our toll free number 1-866-287-5555 Owner ’ s Record The model and serial numbers are located on the back of the TV . Keep a record of the numbers in the spaces provided below . Refer to them whenever you call upon your We stinghouse Digital dealer regarding this product.
CONTENTS WELCOME Package Contents Contacting W estinghouse Digital 1. PRODUCT SAFETY Important Notice Concerning Power Cord Selection FCC Compliance S tatement Product Safety Instructions —Other Notices Antenna Installation Safety —Outdoor Antenna Grounding —Lightning —Power Lines 2.
4. HDTV OPERA TION About the On Screen Display (OSD) OSD Menus & Features —Video Menu Calibration Menu Color T emperature —Display Menu —TV Menu Add or delete additional TV Channels About Pa.
WELCOME Congratulations on the purchase of your High Definition LCD TV—and thank you for choosing Westinghouse. This User Manual was created to ensure simple, safe setup and use of all the features offered by your new HDTV .
5 English.
6 P P P L L L E E E A A A S S S E E E R R R E E E A A A D D D F F F I I I R R R S S S T T T : : : 1. PRODUCT SAFETY WARNING: This device must be operated with the original po wer supply, part number DPS-210 EP 2 C. CAUTION: The power supply outlet should be located near High Definition LCD TV and shoul d be easily accessible.
x Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. x Consult the Westinghou se Service Center or an experienced radio/TV technici an for assistance.
1. PRODUCT SAFETY Follow and obey all warni ngs and instructions marked on the High Definitio n LCD TV. For your safety, please read all of the following safety and operating inst ructions before you operate the High Definition LCD TV—and keep this User’s Manual for future reference.
1. PRODUCT SAFETY Antenna Installation Safety Outdoor Antenna Grounding If an outside antenna or cable system is connected to the High Definition LCD TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges.
2. INTRODUCTION: THE BASICS Digital Television (DTV) T elevision broadcasting is changing. By February of 2009, traditional analog TV transmissions (the standard since TV’ s inception) will cease to exist, in compliance with a federal mandate requiring all U.
2. INTRODUCTION: THE BASICS About the Digital Television Picture Y our new Westinghouse High Definition LCD TV has a built-in HDTV/NTSC tuner , meaning it can receive both analog and digital broadcast s from your antenna, cable or satellite service.
2. INTRODUCTION: THE BASICS About Digital Channels Currently , all broadcasters have an analog TV channel and a digital TV channel. The digital bandwid th has the capability of accommodating more than one program stream because each broadcaster ’s assigned digital channel carries a 19.
2. INTRODUCTION: The Basics The Electronic Program Guide (EPG) Y our Westinghouse High Definition LCD TV features an on-screen interactive Electronic Program Guide (EPG) that allows you to review program information, as well as navigate through current and future programming options by channel or genre to plan viewing and recording.
2. INTRODUCTION: CONTROLS AND CONNECTIONS Front View Use buttons on the right front side of your HDTV (or remote control on remote control) for On Screen Display (OSD), volume adjustment, channel selection, source, and turning power on or off. 14 n “IR” RECEIVER SPEAKERS p m LED INDICA T OR/ CONTROLS 1.
2. INTRODUCTION: CONTROLS AND CONNECTIONS Rear Right/Left Spine-Mounted Connectors 15 RIGHT SIDE CONNECT ORS 1. YPbPr1/Audio 1 (Right/Left) Connect external video device like DVD or game system 2. YPbPr2/Audio 2 (Right/Left) Connect an external video device like a DVD or gaming system 3.
sidebar: Quick Reference: HDTV Connection YPbPr The “Y” stands for the luminance of the signal; Pb and Pr refer to the color difference signals (“b” for blue, “r” for red). Provides improved color bandwidth over S-Video or composite video connections.
2. INTRODUCTION: Controls and Connections Inserting Remote Control Batteries 1. Remove the battery compartment cover 2. Insert the batteries corresponding to the (+) and ( í ) marks inside the battery compartment 3.
2. INTRODUCTION: CONTROLS AND CONNECTIONS Remote Control Features 1. POWER Switch the power On/Off 2. PIP Display sub picture On/Of f (not available) 3. MUTE Turn the sound On/Off 4. SWAP Switch between PIP and Main Picture (not available) 5. BACKLIGHT Shortcut to adjust backlight adjustment 6.
3. HDTV/ACCESSORY SETUP Now that you’re familiar with the basics of digital television and the various controls and connections for your HDTV, you’re ready to enjoy its superb picture quality and sound, along with the ultimate convenience of connecting your game consoles, VCR, DVD, audio devices or personal computer.
Determining Available Channels x When connected to an antenna, cable or other RF (radio frequency) source, you’ll need to run “Autoscan”—available in the “TV” menu of the OSD (see page 26 .
x Scroll right to the “Settings” menu —Use the up/down b uttons to select “Time Zone” —Select your local time z one, which allo ws you to receiv e HDTV programming inf or mation —Exit th.
3. HDTV/ACCESSORY SETUP Connecting Your Personal Computer Before making any connections, make sure all equipment is turned off. Computer Settings x For optimal picture quality, set your computer’s t.
3. HDTV/ACCESSORY SETUP Connecting Other Accessories Following are the recommended connections to ensure optimal enjoyment of your accessory equipment with your HDTV.
4. HDTV OPERATION About the On Screen Display (OSD) Your HDTV’s On Screen Display (OSD) conveniently integrates all functions required for setup and operation.
4. HDTV OPERATION OSD Menus and Features V ideo Menu The “V ideo” menu allows you to adjust the properties of the image you see on the screen by adjusting the display’ s brightness, contrast, color intensity and hue, picture clarity and sharpness.
4. HDTV OPERATION Calibration Menu The “Calibration” menu integrates advanced choices that allow you to optimize your HDTV experience, especially for V ideo setting and individual color adjustments. Settings Menu Features Function Descriptions Deinterlace T urns on/off Deienterlace.
4. HDTV OPERATION Color T emperature The section Color T emp in the “Calibration” menu allow you to adjust each color temperature (W arm, Neutral, Cool) individually .
4. HDTV OPERA TION Display Menu The “Display” menu allows you to control the appearance of the image you see on the screen, based on the selected source input (see picture below) 28 Adjustment Dis.
4. HDTV OPERA TION TV Menu The “TV” menu provides a broad array of functions you’ll use during setup, as well as customizing various features such as closed captioning, favorite channels and parent al controls.
4. HDTV OPERA TION Add or delete additional TV Channels Use the OSD to access the TV Menu Feature Select Add Channel Add a channel by enter the physical channel number or a range. Select Delete Channel Delete a channel from the current list of viewable channels available 2 1 1.
4. HDTV OPERATION About Parent al Controls The Parental Controls feature allows you to block TV programs based on various ratings systems, as well as to lock out the HDTV’ s right side-mounted controls.
4. HDTV OPERA TION Parent al Controls Channel Locks 32 Parent al Control Menu Features Descriptions & Definitions Lock or unlock the HDTV’s right side- mounted controls Lock Channel Lock or unlo.
4. HDTV OPERA TION Parent al Controls US TV Ratings & Content This sub-menu allows you to block programming according to US TV Ratings as well as content type.
4. HDTV OPERA TION Parent al Controls Canadian English Canadian French CA/FR Ratings Menus Ratings Explanations Children General CG General but inadvisable for young children Children over 8 years C8 .
4. HDTV OPERATION PC (VGA only) Menu The “PC” menu lets you adjust image and phasing. PC Menu Features Adjustment Descriptions Automatically re-centers image to middle of screen by synchronizing b.
4. HDTV OPERATION Audio Menu The “Audio” menu let you precisely configure your audio preferences to optimize your listening experience. Audio Menu Features Adjustment Descriptions Enables to liste.
4. HDTV OPERATION Equalizer Menu The “Equalizer ” menu let you individually configure your audio preferences to optimize your listening experience. Equalizer Menu Features Adjustment Descriptions Allow you to adjust the preset mode according to your preference and listening experience.
4. HDTV OPERATION Power Menu The “Power” menu allows you to manage various power-related functions to simplify your viewing experience and save power.
4. HDTV OPERATION Settings Menu The “Setting” menu integrates still more choices that allow you to optimize your HDTV experience, from language selection to pertinent system and installation information.
4. HDTV OPERATION Input Menu T o change the Main Picture source, press the Input button on the remote to display the Main Picture (MP) input menu. When the input menu is open, press the Input button again to switch to the next input or use the up/down arrows to scroll through the input s and the press enter to switch to the highlighted input.
5. APPENDIX: 42-inch High Definition LCD TV Specifications Model Name TX-42F430S Type 42” TFT (Thin Film Tran sistor), Active Matrix LCD, 19 20 x 1080 vertical stripe; anti-glare coating Color 16.7 million colors Panel Aspect Ratio 16:9 176° (H) / 176° (V) Viewing Angles Video/Audio RGB Analog * 1 (75 ohms, 0.
5.APPENDIX: 47-inch High Definition LCD TV Specifications Model Name TX-47F430S Type 47” TFT (Thin Film Tran sistor), Active Matrix LCD, 1920 x 1080 vertical stripe; anti-glare coating Color 16.7 million colors Panel Aspect Ratio 16:9 176° H) / 176° (V) Viewing Angles Video/Audio RGB( Analog * 1 (75 ohms, 0.
5.APPENDIX: 52-inch High Definition LCD TV Specifications Model Name TX-52F480S Type 52” TFT (Thin Film Tran sistor), Active Matrix LCD, 1920 x 1080 vertical stripe; anti-glare coating Color 16.7 million colors Panel Aspect Ratio 16:9 176° H) / 176° (V) Viewing Angles Video/Audio RGB( Analog * 1 (75 ohms, 0.
5. APPENDIX: Troubleshooting No Power x Make sure power cord is securely connected to the “AC In” jack on the back of the High Definition LCD TV. x Make sure AC power cord is securely connected to the AC socket. x Plug another electrical device (such as a radio) to the power outlet to verify that the outlet is supplying the proper voltage.
5. APPENDIX: Troubleshooting Picture is cut off/with sidebar screen. x Use “Auto Adjust”. x Make sure the aspect ratio is set correctly . Blocky images appear in TV mode. x Check your antenna connection. If necessary, rotate the antenna and wait up to 10 seconds for signal.
5. APPENDIX: Cleaning the High Definition LCD TV ʳ x MAKE SURE THE HIGH DEFINITION LCD TV IS TURNED OFF x NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE To clean the screen: 1. Wipe the screen with a clean, soft lint-free cloth. This removes dust and other particles.
5. APPENDIX: Wall mount and Base removal for the 42”/47”HD LCD TV The TV has been fitted with two set s of VESA mounting holes. The holes are sp aced 75 mm and 100 mm equally apart for the 42” product and 100 mm and 200 mm equally apart for the 47” product.
5. APPENDIX: Wall mount and Base removal for the 52” HD LCD TV The TV has been fitted with two set s of VESA mounting holes. The holes are sp aced 100 mm and 200 mm equally apart for the 52” product. These mounting location are provided strictly as an option to the user for wall mounting.
5. APPENDIX: Safety bracket Options Brackets Anti-tip over option: This TV has two small met al brackets on the back side of the TV . These two brackets have a circular cut out in the c enter . The brackets are to serve as an "anti-tipover" option and/or theft deterrent.
www .wde.com Westinghouse Digital Electronics Santa Fe Springs, CA SE-UM-4206-0702.
Ein wichtiger Punkt beim Kauf des Geräts Westinghouse TX-52H480S (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Westinghouse TX-52H480S noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Westinghouse TX-52H480S - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Westinghouse TX-52H480S reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Westinghouse TX-52H480S erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Westinghouse TX-52H480S besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Westinghouse TX-52H480S verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Westinghouse TX-52H480S. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Westinghouse TX-52H480S gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
