Benutzeranleitung / Produktwartung N1 des Produzenten Belkin
Zur Seite of 114
User Manual.
.
T abl e of Contents 1. Intr oduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Advantages of a Wireless Network . . . . . . . . . . . . . . . . . . . . 1 Placement of your N1 V ision . . . . . . . . . . . . . . . . .
.
1 section Intr oduction 9 2 3 4 5 6 7 8 1 0 Thank you for purchasing the Belkin N1 V ision wireless router (the N1 Vision). Following ar e two short sections—the first discusses the benefits of home networking, and the other outlines best practices that maximize your wireless home network range and performance.
Intr oduction 3 2 3 2 Revolutionary N1 Wireless T echnology with MIMO (N1 MIMO) Y our Belkin Vision wireless router uses a new smart-antenna technology called Multiple Input Multiple Output (MIMO). N1 MIMO complies with the IEEE draft 802.11n specification.
3 2 1 section Intr oduction 9 2 3 4 5 6 7 8 1 0 3 2 If you have concerns about your network’ s performance that might be related to range or obstruction factors, try moving the computer to a position between five and 10 feet from the N1 Vision in order to see if distance is the problem.
Intr oduction 5 4 5 4 3. Cor dle ss Pho nes If the performance of your wireless network is impaired after attending to the above issues, and you have a cordless phone: • T ry moving cordless phones away from your N1 Vision and your wireless-enabled computers.
5 4 1 section Intr oduction 9 2 3 4 5 6 7 8 1 0 5 4 5. Sec ur e Conn ecti ons, VPNs, an d AOL Secure connections typically require a user name and password, and are used where security is important.
Pr oduct Overvie w 7 6 7 6 Pr oduct F eatur es In minutes you will be able to share your Internet connection and network your computers. The following is a list of features that make your new Belkin N1 Vision an ideal solution for your home or small office network.
7 6 section Pr oduct Overvie w 1 9 2 3 4 5 6 7 8 1 0 7 6 Integrated 10/100 4-Port Switch The N1 Vision has a built-in, four -port network switch to allow your wired computers to share printers, data and MP3 files, digital photos, and much more. The switch features automatic detection so it will adjust to the speed of connected devices.
Pr oduct Overvie w 9 8 Integ rated N1 Wir el ess Acc ess Po int N1 MIMO is an exciting new wireless technology based on the draft IEEE 802.11n specification. It employs MIMO (Multiple Input Multiple Output) smart-antenna technology that achieves data rates of up to 300Mbps.
9 8 Knowing your N1 Vision section 1 9 3 4 5 6 7 8 1 0 Pack age Contents • Belkin N1 Vision • Quick Installation Guide • Belkin Assistant CD with User Manual • RJ45 Ether net Networking Cable .
11 10 Knowing your N1 Vision 11 10 Har dwar e Char acteris tics The N1 Vision has been designed to be placed on a desktop. All of the cables exit from the BACK of the N1 Vision for better organization and utility .
11 10 11 10 Knowing your N1 Vision section 1 9 2 3 4 5 6 7 8 1 0 A. I nter act ive Displ ay The interactive display is on the front of the N1 Vision, which indicates which features are in operation.
13 12 Knowing your N1 Vision 13 12 (F) (H) (G) (E).
13 12 13 12 Knowing your N1 Vision section 1 9 2 3 4 5 6 7 8 1 0 E. Conn ecti ons to Wir ed Com pute rs – Gra y Port s Connect your wired (non-wireless) computers to these ports. These ports are RJ45, 10/100/1000 auto-negotiation, auto- uplinking ports for standard UTP category 5 or 6 Ethernet cable.
15 14 Connecting and Configuring your N1 Vision 15 14 V er ify the cont ent s of you r box . Y ou sh ould ha ve th e fol lo wing : • Belkin N1 Vision Wireless N1 Vision • Quick Installation Guide .
15 14 15 14 Connecting and Configuring your N1 Vision section 1 9 2 3 4 5 6 7 8 1 0 Step 1 Hardwar e Connections – Foll ow the Quick Installation Guide (QIG) 1 2 3 4 7 5 6 1 2 3 4 7 5 6 1 2 3 4 7 5 .
17 16 Connecting and Configuring your N1 Vision 17 16 Step 2 Set Up the N1 Vision – Using the Plug-and-Play Router Setup C. Select the country you are located in by using the drop-down box. Click “Next” to continue. B. The Belkin Plug-and-Play Setup Wizard should automatically appear .
17 16 17 16 Connecting and Configuring your N1 Vision section 1 9 2 3 4 5 6 7 8 1 0 F. The N1 Vision will now check for your Inter net connection. G. Y ou will see the Congratulations screen when your N1 Vision can connect to the Internet.
19 18 Connecting and Configuring your N1 Vision 19 18 Interactive Display The N1 Vision’ s interactive display is a powerful instrument for viewing your network information.
19 18 19 18 Connecting and Configuring your N1 Vision section 1 9 2 3 4 5 6 7 8 1 0 1. Int erne t Conne ctio n This icon shows you when the N1 Vision is connected to the Internet.
21 20 Connecting and Configuring your N1 Vision 21 20 5. Wir ele ss Com put ers This icon represents if there are any wireless connections present. OFF Wireless device is not present Solid White Wireless device(s) is connected to the N1 Vision 6. Sec urit y This icon indicates wireless security .
21 20 21 20 Connecting and Configuring your N1 Vision section 1 9 2 3 4 5 6 7 8 1 0 D. Connections/Speed This screen displays all devices currently connected to the N1 Vision and the speed of the broadband data that is being downloaded or uploaded per each device.
23 22 Connecting and Configuring your N1 Vision 23 22 Menu Screen Push the “Menu” button to open the display’ s Menu options. The Menu option allows you to enable features within the N1 Vision. The following outlines the details of each feature within the Menu section.
23 22 23 22 Connecting and Configuring your N1 Vision section 1 9 2 3 4 5 6 7 8 1 0 Push Button Security – Select this option if you would like to set up your computers or devices using the Wi-Fi Protected Setup T M (WPS) standard. Using WPS is not a requirement to connect to the N1 Vision.
25 24 Connecting and Configuring your N1 Vision 25 24 T r oubl eshoot ing Ass istant CD Belkin has provided our Assistant softwar e to make installing your N1 Vision a simple and easy task. Y ou can use it to get your N1 Vision up and running in minutes.
25 24 25 24 Connecting and Configuring your N1 Vision section 1 9 2 3 4 5 6 7 8 1 0 Progr ess Screen T roubleshooting Assistant will show you a progress screen each time a step in the setup has been completed. Select your language of choice and click “Go” to run the T roubleshooting Assistant.
27 26 Connecting and Configuring your N1 Vision 27 26 1.1 Checking Settings The T roubleshooting Assistant will now examine your computer’ s network settings and gather information needed to complete the N1 Vision’ s connection to the Internet. 1.
27 26 27 26 Connecting and Configuring your N1 Vision section 1 9 2 3 4 5 6 7 8 1 0 1.4 Requesting Internet Account Info (if needed) If your Internet account requir es a login and password, you will be prompted with a screen similar to the one on the left.
29 28 Connecting and Configuring your N1 Vision 29 28 1.6 Checking Inter net Connection W e are almost done. The T roubleshooting Assistant will now check your connection to the Internet. Congratulations Y ou have finished installing your new Belkin N1 Router .
29 28 29 28 Connecting and Configuring your N1 Vision section 1 9 2 3 4 5 6 7 8 1 0 1.7 Optional: Assistance Connecting Other Computers This optional step will help you to connect additional wired and wireless computers to your network. Follow the on-screen instructions.
31 30 Alternate Setup Method 31 30 Step 1 Hardwar e Connections – Foll ow the Quick Installation Guide (QIG) See the QIG or Step 1: Hardwar e Connections from the previous section.
31 30 31 30 Alternate Setup Method section 1 9 2 3 4 5 6 7 8 1 0 Logging into the N1 Vision Y ou will see the N1 Vision’ s home page in your browser window. The home page is visible to any user who wants to see it. T o make any changes to the N1 Vision’ s settings, you have to log in.
33 32 Alternate Setup Method 33 32 (10 ) (5) (4 ) (3) (7) (6) (1) (2) (9) (8) 1. Qui ck-N aviga tion Links Y ou can go directly to any of the N1 Vision’ s advanced UI pages by clicking directly on these links. The links are divided into logical categories and grouped by tabs to make finding a particular setting easier to find.
33 32 33 32 Alternate Setup Method section 1 9 2 3 4 5 6 7 8 1 0 to enter a password. When you are logged into the N1 Vision, you can make changes to the settings. When you are finished making changes, you can log out of the N1 Vision by clicking the “Logout” button.
35 34 Alternate Setup Method 35 34 Step 4 Configuring your N1 Vision for Connection to y our Internet Service Pr ovider (ISP) The “Inter net/WAN” tab is where you will set up your N1 Vision to connect to your Internet Service Provider (ISP).
35 34 35 34 Alternate Setup Method section 1 9 2 3 4 5 6 7 8 1 0 Setting your Connection Type From the “Connection T ype” page, you can select the type of connection you use. Select the type of connection you use by clicking the button (1) next to your connection type and then clicking “Next” (2) .
37 36 Alternate Setup Method 37 36 Setting your Internet Service Provider (ISP) Connection T ype to Dynamic IP A dynamic connection type is the most common connection type found with cable modems. Setting the connection type to “dynamic” in many cases is enough to complete the connection to your ISP .
37 36 37 36 Alternate Setup Method section 1 9 2 3 4 5 6 7 8 1 0 S e t t i n g y ou r I n t e rn et S e r v i c e P r o vi de r ( I S P ) C o n n e c t i o n T yp e t o S t at ic I P A static IP address connection type is less common than other connection types.
39 38 Alternate Setup Method 39 38 S e t t i n g y ou r I S P C o n n e c t i o n T y p e t o P P P o E Most DSL providers use PPPoE as the connection type. If you use a DSL modem to connect to the Internet, your ISP may use PPPoE to log you into the service.
39 38 39 38 Alternate Setup Method section 1 9 2 3 4 5 6 7 8 1 0 (1) (2) (3) (4) (5) 1. Use r Name This space is provided to type in your user name that was assigned by your ISP . 2. Pa ssw or d T ype in your password and retype it into the “Retype Passwor d” box to confirm it.
41 40 Alternate Setup Method 41 40 S e t t i n g y ou r I n t e rn et S e r v i c e P r o vi de r ( I S P ) C o n n e c t i o n T yp e t o P o i n t - t o - P o i n t T un ne li ng P r o t o c o l ( P.
41 40 41 40 Alternate Setup Method section 1 9 2 3 4 5 6 7 8 1 0 6. My Sub net Ma sk Provided by your ISP . Enter the IP address here. 7. Con nect ion ID (o ptio nal) Provided by your ISP . If your ISP did not give you a connection ID, leave this blank.
43 42 Alternate Setup Method 43 42 Set ting your Co nnec tion T ype if yo u ar e a T els tra ® BigP ond Use r [Australia Only]. Y our user name and password are provided to you by T elstra BigPond. Enter this information below . Choosing your state from the drop-down menu (1) will automatically fill in your login server IP address.
43 42 43 42 Alternate Setup Method section 1 9 2 3 4 5 6 7 8 1 0 4. Use r Decid e Logi n Serv er Man uall y If your login server IP address is not available in the “Select Y our State” drop-down m.
45 44 Alternate Setup Method 45 44 Configuring your WAN Media Access Controll er (MAC) Addr ess All network components including cards, adapters, and routers, have a unique “serial number” called a MAC address.
45 44 45 44 Alternate Setup Method section 1 9 2 3 4 5 6 7 8 1 0 Using your Internet browser , you can access the N1 Vision’ s W eb-Based Advanced User Interface. In your browser , type “192.168.2.1” (do not type in anything else such as “http://” or “www”) then press the “Enter” key .
47 46 Using the W eb-Based Advanc ed User Interfac e 47 46 Changing LAN Settings All settings for the inter nal LAN setup of the N1 Vision can be viewed and changed here. (1) (2) (5) (6) (4) (3) 1. IP Add r ess The “IP address” is the internal IP address of the N1 Vision.
47 46 47 46 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 3. DHC P Serv er The DHCP server function makes setting up a network very easy by assigning IP addresses to each computer on the network automatically . The default setting is “On”.
49 48 Using the W eb-Based Advanc ed User Interfac e 49 48 Viewing the DHCP Client List Page Y ou can view a list of the computers (known as clients), which are connected to your network.
49 48 49 48 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 Changing the Wirel ess Network Name (SSID) T o identify your wireless network, a name called the SSID is used.
51 50 Using the W eb-Based Advanc ed User Interfac e 51 50 Changing the Wirel ess Channel There are a number of operating channels from which you can choose—in the United States, there are 11 and in the United Kingdom (and most of Europe), there are 13.
51 50 51 50 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 Using the Bandwidth Switch This switch allows you to set the N1 Vision’ s wireless bandwidth modes. There are several modes available: 1) 20MHz only Setting the N1 Vision to this mode allows only 20MHz operation.
53 52 Using the W eb-Based Advanc ed User Interfac e 53 52 Using the Broadc ast SSID F eature Note: This advanced feature should be employed by advanced users only .
53 52 53 52 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 Using Wi-Fi Prot ected Setup WPS uses WP A2 (described below) for encryption. It does not provide additional security , but rather , standardizes the method for securing your wireless network.
55 54 Using the W eb-Based Advanc ed User Interfac e 55 54 1. Wi-Fi Protected Setup (WPS): Enabled or Disabled. 2. Personal Identification Number (PIN) Method: In this method, a wireless client wishing to access your network must supply a 4- or 8-digit PIN to the N1 Vision.
55 54 55 54 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 WP A2 Requ ir ement s IMP ORT ANT : In order to use WP A2 security , all your computers and wireless client adapters must be upgraded with patches, driver , and client utility software that supported WP A2.
57 56 Using the W eb-Based Advanc ed User Interfac e 57 56 Setting WPA/WP A2-Personal (PSK) Like WP A security , WP A2 is available in both WP A2-Personal (PSK) mode and WP A2-Enterprise (RADIUS) mode.
57 56 57 56 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 IMP ORT ANT : Make sure your wireless computers are updated to work with WP A2 and have the correct settings to get proper connection to the N1 Vision.
59 58 Using the W eb-Based Advanc ed User Interfac e 59 58 Set tin g Gues t Ac c es s Within the WP A security page, the Guest-Access feature is available. Select this option to create a separate network that allows guests to connect to the Internet while keeping them away from accessing your network, computers, and private files.
59 58 59 58 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 Set tin g WEP En cryp tio n Note to Mac users: The “Passphrase” option will not operate with Apple ® AirPort ® . T o configure encryption for your Mac computer , set the encryption using the manual method described in the next section.
61 60 Using the W eb-Based Advanc ed User Interfac e 61 60 Using a Hexadecimal Key A hexadecimal key is a mixture of numbers and letters fr om A–F and 0–9. 64-bit keys are 10 digits long and can be divided into five two-digit numbers. 128-bit keys are 26 digits long and can be divided into 13 two-digit numbers.
61 60 61 60 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 Usi ng the Ac c ess P oin t Mo de Not e: This advanced feature should be employed by advanced users only . The N1 Vision can be configured to work as a wireless network access point.
63 62 Using the W eb-Based Advanc ed User Interfac e 63 62 Set tin g MAC Addr ess Co ntr ol The MAC address filter is a powerful security featur e that allows you to specify which computers are allowed on the wir eless network. Not e: This list applies only to wireless computers.
63 62 63 62 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 Setting up an Allo w Acces s List 1. Select the “Allow” radio button (1) to begin setting up a list of computers allowed to connect to the wireless network. 2.
65 64 Using the W eb-Based Advanc ed User Interfac e 65 64 Con fig urin g t he Fir ewa ll Y our N1 Vision is equipped with a firewall that will pr otect your network from a wide array of common hacker.
65 64 65 64 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 Configuring Internal F orwarding Settings The Virtual Servers function will allow you to r oute external (Inter net) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through your N1 V ision to your internal network.
67 66 Using the W eb-Based Advanc ed User Interfac e 67 66 Setting Client IP Filters The N1 Vision can be configur ed to restrict access to the Internet, e-mail, or other network services at specific days and times. Restriction can be set for a single computer , a range of computers, or multiple computers.
67 66 67 66 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 Enabling the Demilitarized Zone (DMZ) The DMZ feature allows you to specify one computer on your network to be placed outside of the firewall.
69 68 Using the W eb-Based Advanc ed User Interfac e 69 68 Using Dynamic DNS The Dynamic DNS service allows you to alias a dynamic IP address to a static host name in any of the many domains DynDNS.org of fers, allowing your network computers to be more easily accessed fr om various locations on the Internet.
69 68 69 68 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 Blocking an ICMP Ping Computer hackers use what is known as “pinging” to find potential victims on the Internet.
71 70 Using the W eb-Based Advanc ed User Interfac e 71 70 Restarting the Router Sometimes it may be necessary to restart or r eboot the Router if it begins working improperly . Restarting or rebooting the Router will NOT delete any of your configuration settings.
71 70 71 70 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 Restoring F actory Default Settings Using this option will restor e all of the settings in the Router to the factory (default) settings. It is recommended that you back up your settings before you r estore all of the defaults.
73 72 Using the W eb-Based Advanc ed User Interfac e 73 72 Saving a Curr ent Configuration Y ou can save your current configuration by using this feature. Saving your configuration will allow you to restor e it later if your settings are lost or changed.
73 72 73 72 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 3. When the save is complete, you will see this window . Click “Close”. The configuration is now saved. Restoring a Pr evious Configuration This option will allow you to restor e a previously saved configuration.
75 74 Using the W eb-Based Advanc ed User Interfac e 75 74 2. Y ou will be asked if you want to continue. Click “OK”. 3. A reminder window will appear . It will take up to 60 seconds for the configuration restoration to complete. Click “OK”. 4.
75 74 75 74 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 Updating the Firmwar e From time to time, Belkin may r elease new versions of the Router’ s firmware. Firmwar e updates contain feature improvements and fixes to problems that may have existed.
77 76 Using the W eb-Based Advanc ed User Interfac e 77 76 Downl oading a New V ersion of Firmwar e If you click the “Check Firmware” button and a new version of firmware is available, you will see a scr een similar to the one below: 1. T o download the new version of firmware, click “Download”.
77 76 77 76 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 Updating the N1 Vision’ s Firmwar e 1. In the “Firmware Update” page, click “Browse”. A window will open that allows you to select the location of the firmware update file.
79 78 Using the W eb-Based Advanc ed User Interfac e 79 78 3. The “Update Firmware” box will now display the location and name of the firmware file you just selected.
79 78 79 78 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 Changing System Settings The “System Settings” page is where you can enter a new administrator password, set the time zone, enable r emote management, and turn on and off the NA T function of the N1 Vision.
81 80 Using the W eb-Based Advanc ed User Interfac e 81 80 Setting the Time and Time Zone The N1 Vision keeps time by c onnecting to a Simple Network Time Protocol (SNTP) server . This allows the N1 Vision to synchronize the system clock to the global Internet.
81 80 81 80 Using the W eb-Based Advanc ed User Interfac e section 1 9 2 3 4 5 6 7 8 1 0 Advanced Feature: The “Remote Access Port” option allows you to configure the desir ed “Remote Access Port for Remote Management” feature. The default access port is set to port 80.
Using the W eb-Based Advanc ed User Interfac e 83 82 Enabling/Disabling UPnP UPnP (Universal Plug-and-Play) is yet another advanced feature offer ed by your Belkin N1 Vision. It is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant.
1 2 3 4 5 9 8 1 0 83 82 Manuall y Configuring Network Settings section 7 Set up the computer that is connected to the cable or DSL modem FIRST using these steps. Y ou can also use these steps to add computers to your N1 Vision after the N1 V ision has been set up to connect to the Internet.
85 84 Manuall y Configuring Network Settings 85 84 Manuall y Configuring Network Settings in Mac OS X 1. Click on the “System Preferences” icon. 2. Select “Network” (1) from the “System Preferences” menu. 3. Select “Built-in Ethernet” (2) next to “Show” in the Network menu.
85 84 1 2 3 4 5 6 9 8 1 0 85 84 Manuall y Configuring Network Settings section 7 4. Select the “TCP/IP” tab (3) . Next to “Configure” (4 ) , you should see “Manually” or “Using DHCP”. If you do not, check the PPPoE tab (5) to make sure that “Connect using PPPoE” is NOT selected.
87 86 Manuall y Configuring Network Settings 87 86 Manuall y Configuring Network Settings in Windows 2000, NT ® , or XP 1. Click “Start”, “Settings”, then “Control Panel”. 2. Double-click on the “Network and dial-up connections” icon (Windows 2000) or the “Network” icon (Windows XP).
87 86 1 2 3 4 5 6 9 8 1 0 87 86 Manuall y Configuring Network Settings section 7 Manuall y Configuring Network Adapters in Windows 98SE or Me 1. Right-click on “My Network Neighborhood” and select “Properties” from the drop-down menu. 2. Select “TCP/IP Settings” for your installed network adapter .
89 88 Rec ommended W eb Bro wser Settings 89 88 In most cases, you will not need to make any changes to your web browser’ s settings. If you are having tr ouble accessing the Internet or the advanced web-based user interface, then change your browser’ s settings to the recommended settings in this section.
89 88 89 88 Rec ommended W eb Bro wser Settings section 1 9 2 3 4 5 6 7 8 1 0 4. Make sure there are no check marks next to any of the displayed options: “Automatically detect settings”, “Use automatic configuration script”, and “Use a proxy server”.
91 90 T r oubl eshooting 91 90 Assistant CD does not automaticall y start. If the CD-ROM does not start the Assistant software automatically , it could be that the computer is running other applications that are interfering with the CD drive.
91 90 91 90 T r oubl eshooting section 1 9 2 3 4 5 6 7 8 1 0 2. Unplug power to the N1 Vision for 10 seconds, and then plug the power back into the N1 Vision. Ensure that the N1 Vision’ s “router” Display is on. If not, check to make sure that the AC adapter is connected to the N1 Vision and plugged into a wall outlet.
93 92 T r oubl eshooting 93 92 • The Assistant software completed installation, but my web br owser doesn’t work. • I am unable to connect to the Internet. The “modem” icon on my N1 Vision is blinking, and the “internet” icon is blinking.
93 92 93 92 T r oubl eshooting section 1 9 2 3 4 5 6 7 8 1 0 • The Assistant software completed installation, but my web br owser doesn’t work. • I am unable to connect to the Internet. The “modem” icon on my N1 Vision is on, and the “internet” icon is blinking.
95 94 T r oubl eshooting 95 94 • The Assistant software completed, but my web browser doesn’t work. • I am unable to connect to the Internet. The “modem” icon on my N1 Vision is blinking, and the “internet” icon is solid.
95 94 95 94 T r oubl eshooting section 1 9 2 3 4 5 6 7 8 1 0 I can’t connect to the Internet wir eles sly. If you are unable to connect to the Inter net from a wireless computer , please check the following items: 1. Look at the lights on your N1 Vision.
97 96 T r oubl eshooting 97 96 I can’t connect to the Internet wir eles sly, but my network name is listed. If the name of your network is listed in the “Available Networks” list, please follow the steps below to connect wirelessly: 1. Click on the correct network name in the “Available Networks” list.
97 96 97 96 T r oubl eshooting section 1 9 2 3 4 5 6 7 8 1 0 • My wir eles s network performance is inconsistent. • Data transfer is sometimes sl ow. • Signal str ength is poor. • Difficulty establishing and/or maintaining a Virtual Private Network (VPN) connection.
99 98 T r oubl eshooting 99 98 I am having difficulty setting up Wired Equivalent Privacy (WEP) security on my Belkin N1 Vision. 1. Log into your N1 Vision. Open your web browser and type in the IP address of the N1 Vision. (The N1 Vision’ s default is 192.
99 98 99 98 T r oubl eshooting section 1 9 2 3 4 5 6 7 8 1 0 I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin client car d. The client card must use the same key as the N1 Vision. For instance, if your N1 Vision uses the key 00112233445566778899AABBCC, then the client card must be set to the exact same key .
101 100 T r oubl eshooting 101 100 Do Belkin products support WP A? Not e: T o use WP A security , all your clients must be upgraded to drivers and software that support it. At the time of this F AQ publication, a security patch download is available, for free, from Microsoft.
101 100 101 100 T r oubl eshooting section 1 9 2 3 4 5 6 7 8 1 0 I am having difficulty setting up Wirel ess Protected Acc ess (WP A) security on a Belkin wirel ess client car d for a home network. Clients must use the same key that the N1 Vision uses.
103 102 T r oubl eshooting 103 102 I am NOT using a Belkin client card for a home network and I am having difficulty setting up Wirel ess Protected Acc ess (WP A) security.
103 102 103 102 T r oubl eshooting section 1 9 2 3 4 5 6 7 8 1 0 3. Under the “Wireless Networks” tab, click the “Configure” button and you will see the following screen. 4. For a home or small business user , select “WP A-PSK” under “Network Administration”.
105 104 T r oubl eshooting 105 104 Wir eless Comparison Chart Wireless T echnology 802.11b G (802.11g) G Plus (802.11g with HSM) G Plus MIMO (802.11g with MIMO MRC) N1 MIMO (draft 802.11n with MIMO) Speed* 11Mbps link rate/baseline 5x faster than 802.
105 104 105 104 T r oubl eshooting section 1 9 2 3 4 5 6 7 8 1 0 T echnical Support Y ou can find technical support information at www.be lkin .c om/ net work ing . If you want to contact technical support by phone, please call: US: 877-7 36-57 71 800 -223 -5546 ext.
107 106 Information 107 106 FCC Statement DECLARA TION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMP A TIBILITY W e, Belkin International, Inc., of 501 W est Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F5D8232-4 to which this declaration relates, complies with Part 15 of the FCC Rules.
107 106 107 106 Information section 1 9 2 3 4 5 6 7 8 1 0 Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Inter national, Inc., may void the user’ s authority to operate the equipment.
109 108 Information 109 108 Belkin Inter national, Inc., Limited Lifetime Product W arranty What this warranty covers. Belkin Inter national, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly , material, or workmanship.
109 108 109 108 Information section 1 9 2 3 4 5 6 7 8 1 0 Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser .
Belkin International, Inc. 501 W est W alnut Street Los Angeles, CA 90220, USA 310-898-1100 310-898-1111 fax Belkin Ltd. Express Business Park, Shipton W ay Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.
Ein wichtiger Punkt beim Kauf des Geräts Belkin N1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Belkin N1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Belkin N1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Belkin N1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Belkin N1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Belkin N1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Belkin N1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Belkin N1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Belkin N1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
