Benutzeranleitung / Produktwartung LS6425-4 des Produzenten VTech
Zur Seite of 82
U s e r ’s m a n u a l w w w . v t e c h p h o n e s . c o m Models: LS6425/LS6425-2/ LS6425-3/ LS6425-4/ LS6426-3/LS6426-4.
Congratulations on purchasing your new VTech product. Before using this telephone, please read Important safety instructions on page 68 of this manual. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech telephone.
i Table of contents Getting started ................................. 1 Parts checklist ................................... 1 Telephone installation........................ 2 Battery installation ............................. 3 Battery charging ......
ii Edit a directory entry........................ 35 Delete a directory entry ................... 35 Assign a directory entry to a speed dial location ....................... 36 Dial a speed dial entry ..................... 36 Reassign a speed dial number .
1 Parts checklist Yo ur t ele ph on e pa cka ge c on tai ns t he f oll ow in g ite ms . Sa ve yo ur s al es re ce ip t and or ig in al pa ck ag in g i n ca se it i s ne ce ssa ry t o shi p yo ur t ele ph on e for w ar ra nt y s er vi ce .
Getting started 2 Telephone installation Install the telephone base and charger(s) as shown below. Make sure that the electrical outlet is not controlled by a wall switch.
Getting started 3 Battery installation Install the battery as shown below. Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment.
Getting started 4 Battery charging Once y ou have i nstalled the batte ry, the s creen in dicates t he batter y status (see the ta ble below ). If nec essary, p lace the handset i n the te lephone b ase or ch arger to cha rge the b attery. F or best p erformanc e, keep the hands et in the telephon e base o r charger when not in use.
Getting started 5 Installation options Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, use the provided wall mount bracket to connect with a standard dual-stud telephone wall mounting plate.
Getting started 6 Wall mount to tabletop installation If the telephon e line co rd and po wer adapt er cord a re bundl ed, untie them firs t. Push the black wall mount bracket up and remove it from the wall plate. Unplug the telephone line cord (or DSL filter) from the wall.
Getting started 7 Telephone base layout X/DELETE Press to delete the message currently playing (page 50). When the telephone is not in use, press twice to delete all old messages (page 52). Message window Shows the number of messages and other answering system information (page 53).
8 Handset layout Getting started CHARGE light On when the handset is charging in the telephone base or charger (page 3). / /VOLUME (directory/volume) Press to enter the directory when the telephone is not in use (page 34). While in a menu, press to scroll up.
9 Handset layout Getting started CID/ /VOLUME (caller ID/volume) Press to review the caller ID log when the telephone is not in use (page 40). While in a menu, press to scroll down. Du rin g a c al l o r mes sa ge pl ayb ac k, pr ess t o d ec rea se th e l is ten in g v ol ume ( pag e 19 or pa ge 51 ).
Getting started 10 PUSH TO TALK (PTT) Press to begin a broadcast to one or multiple handsets (pages 28 and 29). Press and hold to broadcast to a group of handsets when the handset is not in use (page 29).
11 11 Using the menu In the ringers menu, you can select the ringer tones and adjust the ringer volume for incoming calls. In the settings menu, you can change and edit the settings for LCD language, announce caller ID, voicemail indicators, handset name, key tone, CID time synchronization, home area code and dial mode.
12 12 Ringer volume (telephone base) Pr ess /V OL or /V OL on t he ri ght s ide o f t he te le pho ne ba se t o a dj ust t he ri nge r vo lum e whe n the t ele ph one i s n ot in u se . W he n y ou se t the b ase r ing er vo lum e to of f, th e mes sa ge wi ndo w dis pl ays 0 an d the s ys tem a nno un ces , “ Ba se ri nge r is of f.
13 13 Telephone settings Set date and time The answering system announces the date and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call.
14 Telephone settings 14 Voice announce caller ID The vo ice annou nce call er ID fea ture lets you kno w who’s c alling wi thout ha ving to look a t the dis play. Whe n you hav e an inco ming call , the ha ndset and /or base announ ces the c aller’s n ame based on the d irectory or caller ID info rmation.
15 Telephone settings 15 Clear voicemail indicators If you subscribe to voicemail service offered by your telephone service provider, New voicemail and appear on the handset when you have new voicemail messages. Contact your telephone service provider for more information and assistance about using your voicemail service.
16 Telephone settings 16 Rename handset You ca n c hang e t he n ame for ea ch regi ste red han dse t. T he name ca n be up to 11 cha rac ters . Press MENU/ SELECT when the handset is not in use. Press or to highlight >Settings , then press MENU /SELECT .
17 Telephone settings 17 CID time synchronization This feature allows the time and date to be set by incoming caller ID information. The default setting is On . Press MENU/ SELECT when the handset is not in use. Press or to highlight >Settings , then press MENU /SELECT .
18 Telephone settings Dial mode The dial mod e is pres et to ton e di aling . If you have puls e (r otary ) se rvic e, yo u mu st cha nge t he d ial m ode to pu lse dial ing b efor e usi ng t he te leph one m akin g a c all. Press MENU/ SELECT when the handset is not in use.
19 Telephone operation Make a call Press /FLASH or /SPEAKER on the handset. When you hear a dial tone, dial the number. Predial a call Dial the number on the handset. Press /FLASH or /SPEAKER . Answer a call Press /FLASH , /SPEAKER or any dialing key ( 0 - 9 , # or ) on the handset to answer a call.
Telephone operation 20 Mute The mute function allows you to hear the other party but the other party cannot hear you. During a call, press MUTE/ DELETE . The handset displays Muted for a few seconds and MUTE displays until the mute function is turned off.
Telephone operation 21 Find handset The find handset feature helps you find misplaced handsets. To start the paging tone: Press / FI ND H AN DS ET on the telephone base.
Telephone operation 22 Review and dial a redial entry Press REDIAL/ PAUSE to enter the redial list. Pre ss , or REDIA L/ PAU SE re peat edly to b rowse . Whe n the des ired entr y dis play s, press / FLASH or /SPEAKER to dial. -OR- Press / FLASH or /SPEAKER.
Telephone operation 23 Chain dialing Use this feature to initiate a dialing sequence from numbers stored in the directory, caller ID log or redial list while you are on a call. Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or access codes) from the directory, caller ID log or redial list.
24 Join a call in progress The telephone base supports four system handsets at a time on an outside call. You can buy additional expansion handsets ( LS6405 ) for this telephone base.
25 Multiple handset use Answer an incoming call during an intercom call If you receive an incoming outside call during an intercom call, there will be an alert tone. To answer the call, press / FLASH on the handset. The intercom call ends automatically.
26 Multiple handset use Blind transfer Us e t hi s fea tu re to tr an sfe r an ou tsi de ca ll t o o th er sy ste m han ds ets w ith ou t n ot ify in g th em. T hi s f ea tur e is av ail ab le on ly if yo u ha ve tw o o r mor e han ds ets . When the handset is on a call, press MENU/ SELECT.
27 Multiple handset use Push-to-talk (PTT) You can directly broadcast messages from one handset to the speakerphone of one or multiple handsets. Press and hold PUSH TO TALK to begin two-way communication. If only one handset is available or registered, the handset screen shows PTT requires two handsets when you press PUSH TO TALK .
28 Multiple handset use PTT to a single handset You have two ways to begin a PTT call: If you have two handsets, press and hold PUSH TO TALK when the handset is not in use. If you have more than two handsets, press PUSH TO TALK when the handset is not in use.
29 Multiple handset use PTT to multiple handsets When you have two to five registered handsets, PTT supports one-to-all calls (one-to-four maximum). However, when you have six or more registered handsets, PTT supports a maximum of one-to-three calls. The first four registered handsets will be able to use this feature.
30 Multiple handset use Answer a PTT call You can respond to a PTT call whenever the speakerphone light is off, as described below. When your handset receives a PTT call, the handset beeps and the screen displays Press and hold [PTT] to talk .
31 Multiple handset use End a PTT call For a one-to-one PTT call, both the originating and destination handsets can end the PTT call. For a PTT call to multiple handsets, the originating handset can end the PTT call. If any one of the destination handsets leaves the PTT call, the call continues until all handsets hang up.
32 About the directory The directory can store up to 50 entries with up to 30 digits for each phone number and 15 alphanumeric characters for each name. Directory entries are shared by all system handsets. Any additions, deletions or edits made on one handset are reflected on all handsets.
33 Directory Add a directory entry Use the following steps to store an entry in the directory. Enter the number when the handset is not in use and press MENU/ SELECT . The screen displays EDIT NUMBER . -OR- Press MENU/ SELECT when the handset is not in use.
34 Directory Search the directory Entries are sorted alphabetically. Press / when the handset is not in use. -OR- Press MENU/ SELECT when the handset is not in use. Press or to highlight >Directory , then press MENU /SELECT . Press MENU /SELECT again to select >Review .
35 Directory Edit a directory entry Search for the desired entry in the directory (see Search the directory or Alphabetical search on page 34). Press MENU/ SELECT . The screen displays EDIT NUMBER. Use the dialing keys to edit the number. Press MUTE /DELETE to backspace and delete a digit.
36 Directory Assign a directory entry to a speed dial location You can store up to 10 directory entries in the speed dial directory. The speed dial entries are shared by all handsets. Press and hold an empty speed dial key ( 0 - 9 ). -OR- Press MENU/ SELECT when the handset is not in use.
37 Directory Reassign a speed dial number Press MENU/ SELECT when the handset is not in use. Press or to scroll to >Directory and then press MENU /SELECT . Press or to scroll to >Speed dial , then press MENU /SELECT . Press or to select a desired speed dial location, then press MENU /SELECT .
38 About caller ID This product supports caller ID services provided by most telephone service providers. Depending on your service subscription, you may see the caller’s number, or the caller’s name and number that are sent by your telephone service provider after the first or second ring.
Caller ID 39 Caller ID log If you subscribe to caller ID service, information about each caller will appear after the first or second ring. If you answer a call before the caller information appears on the screen, it will not be saved in the caller ID log.
Caller ID 40 Missed call indicator When there are calls that have not been reviewed in the caller ID log, the handset displays XX Missed calls . When you have reviewed all the missed calls, the missed call indicator no longer displays. Each time you review a caller ID log entry marked NEW , the number of missed calls decreases by one.
Caller ID 41 Dial a caller ID log entry Se arc h fo r t he de si red c all er ID e ntr y (se e Rev ie w the c all er ID l og on pa ge 40 ). When the desired entry displays, press / FLASH or /SPEAKER to dial.
Caller ID 42 Delete the caller ID log entries To delete one entry: Se arc h fo r t he de si red c all er ID e ntr y (se e Rev ie w the c all er ID l og on pa ge 40 ). Press MUTE /DELETE to delete the selected entry. To delete all entries: Press MENU/ SELECT when the handset is not in use.
43 Answering system Us e th e an sw er in g sy st em m en u of a s ys te m ha nd se t to t ur n on o r of f th e an swe ri ng sy st em , se t up t he a nn ou nc em en t me ss ag e, a ct iv at e th e ca ll s cr ee ni ng , or c han ge th e nu mb er o f ri ng s, r em ot e ac ce ss c od e, m es sa ge a le rt t on e an d me ss ag e re co rd in g ti me .
44 Answering system settings Play your announcement Press MENU/ SELECT when the handset is not in use. Press or to highlight >Answering sys , then press MENU /SELECT . Press MENU /SELECT to select >Announcemen t. Press MENU /SELECT to select >Play annc .
45 Answer on/off The answering system must be turned on to answer and record messages. When the answering system is turned on, the /ANS ON/OFF light on the telephone base turns on and ANS ON displays on the handset. To turn on or off with the telephone base: Press /ANS ON/OFF to turn the built-in answering system on or off.
46 Answering system settings Number of rings You can choose from two, three, four, five, six rings or toll saver. With toll saver selected, the answering system answers after two rings when you have new messages, and after four rings when you have no new messages.
47 Answering system settings Message alert tone The telephone base beeps every 10 seconds to alert you of new messages. The tone stops when all new messages have been reviewed. Press MENU/ SELECT when the handset is not in use. Press or to highlight >Answering sys , then press MENU /SELECT .
48 Answering system and voicemail Your telephone has separate indicators for two different types of voice messages: those left on its built-in answering system and those left at your service provider’s voicemail. Your telephone’s built-in answering system messages and voicemail messages are separate.
49 Answering system operation Message capacity The answering system can record and store up to 99 messages. The recording time of each message depends on the message length you set (see Message recording time on page 47). The total storage capacity for the announcement, messages and memos is approximately 14 minutes.
50 Answering system operation Message playback On the telephone base, if you have new messages, the telephone plays only the new messages (oldest first).
51 Answering system operation To play messages with a handset: Press MENU/ SELECT when the handset is not in use. Press MENU /SELECT to select >Play messages . If you have either new or old messages, the messages play automatically. If you have both new and old messages: To play new messages, press MENU /SELECT to select >Play new msgs .
52 Answering system operation Delete all old messages To delete all old messages with the telephone base: Press X/DELETE when the phone is not in use. The telephone announces, “To delete all old messages, press DELETE again.” Press X/DELETE again.
53 Answering system operation Record, play and delete memos Memos are your own recorded messages used as reminders for yourself or others using the same answering system. You can record your own memos using a system handset. Play and delete them in the same way as incoming messages (see Message playback on pages 50-51).
54 Answering system operation Remote access A two-digit security code is required to access the answering system remotely from any touch-tone telephone. The preset code is 19 ; see Remote access code on page 46 to change it. Dial your telephone number from any touch-tone telephone.
55 Handset display screen messages Answering sys is ON The an sweri ng sy stem is au tomat icall y tur ned o n whe n you chan ge th e set tings unde r ans werin g sys tem s etup menu.
Appendix 56 No battery No b atter y is insta lled. Foll ow th e dir ectio ns fo r bat tery inst allat ion o n pag e 3 t o ins tall the b atter y bef ore c hargi ng. No line There is no telephone line connected. No signal, call ended Communication between the handset and telephone base is lost during a call.
Appendix 57 Handset and telephone base indicators Handset lights On when the handset speakerphone is in use. CHARGE On when the handset is charging in the telephone base or charger. Telephone base lights IN USE On when the telephone line is in use. On when the answering system is answering a call.
Appendix 58 Battery It takes up to 10 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance: Operation Operating time While in handset use (talk.
Appendix 59 Expand your telephone system The ha ndsets pr ovided wi th your t elephone system a re alread y registe red. Each h andset is assigned a number that dis plays on the hand set. Addi tional handse ts regist ered to t he teleph one syste m are as signed in sequenti al order.
Appendix 60 Deregister handsets If you want to replace a handset, or reassign the designated handset number of a registered handset, you must deregister all handsets that are registered to the telephone base. Then register each handset individually. To make deregistration easier, read all of the instructions on this page before you begin.
Appendix 61 Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For customer service, visit our website at www.vtechphones.com, or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.
Appendix 62 Troubleshooting Low battery shows on screen. Place the handset in the telephone base or charger for recharging. Remove and then install the battery again and use it until fully depleted. Then recharge the handset in the telephone base or charger for up to 10 hours.
Appendix 63 Troubleshooting My handset beeps and is not performing normally. Make sure the power cord is securely plugged into the telephone base. Plug the telephone base into a different working electrical outlet not controlled by a wall switch. Move the handset closer to the telephone base.
Appendix 64 I hear other calls when using the cordless handset. Disconnect the telephone base from the telephone wall jack. Plug in a different telephone. If you still hear other calls, the problem is probably in the wiring or telephone service. Call your telephone service provider.
Appendix 65 Troubleshooting Caller ID entries do not match the numbers I need to dial. Caller ID service delivers 10 digits (the area code plus the seven-digit number). If you need to dial something other 10 digits, see View dialing options on page 40 for instructions on changing the number.
Appendix 66 Troubleshooting If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail answers (page 46). To determine how many rings activate your voicemail, contact your telephone service provider.
Appendix 67 Troubleshooting The answering system does not respond to remote commands. Make sure your remote access code is correct (page 46). Make sure you are calling from a touch-tone telephone. When dialing a number, there should be tones. If there are clicks, then it is not a touch-tone telephone and cannot activate the answering system.
Appendix 68 Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: Read and understand all instructions. Follow all warnings and instructions marked on the product.
Appendix 69 Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers.
Appendix 70 About cordless telephones Privacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the c.
Appendix 71 FCC, ACTA and IC regulations FCC Part 15 This equ ipment has been tested and found t o comply wi th the requi rements for a Class B d igital devi ce under Pa rt 15 of th e Federal C ommunication s Commissio n (FCC) rule s.
Appendix 72 If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited warranty.
Appendix 73 Limited warranty What does this limited warranty cover? The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Pr.
Appendix 74 How do you get warranty service? To obtain warranty service, please visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.
Appendix 75 Technical specifications Frequency Control Crystal controlled PLL synthesizer Transmit frequency Handset: 1921.536-1928.448 MHz Telephone base: 1921.536-1928.448 MHz Channels 5 Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use.
76 A About cordless telephones 70 Add a directory entry 33 Add a handset 59 Alphabetical search 34 Announced transfer 25 Announcement 43 Answer a call 19 Answer an incoming call during an intercom cal.
77 Index Message capacity 49 Message playback 50 Message recording time 47 Message window displays 53 Missed call indicator 40 Multiple handset use 24 Mute 20 N New message indication 49 Number of rin.
VTECH TELECOMMUNICATIONS LTD. A mem ber of TH E V TECH GROUP OF C OMP AN IES. Dis trib uted i n the U.S.A . by V T ech C ommu nic atio ns, In c., Beaver ton, Ore gon 970 0 8. Dis trib uted i n Canad a by V T ec h T ec hnol ogi es Can ada Ltd., Ric hm ond, B .
Ein wichtiger Punkt beim Kauf des Geräts VTech LS6425-4 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie VTech LS6425-4 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für VTech LS6425-4 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von VTech LS6425-4 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über VTech LS6425-4 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon VTech LS6425-4 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von VTech LS6425-4 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit VTech LS6425-4. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei VTech LS6425-4 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
