Benutzeranleitung / Produktwartung IA5884 des Produzenten VTech
Zur Seite of 61
www.vtechphones.com Table of contents Parts checklist . . . . . . . . . . . . . . . . . . . . . . 1 Parts checklist for ia5865/ia5870 . . . . . . . . . . . 1 Parts checklist for ia5878/ia5884 . . . . . . . . . . . 2 Parts checklist for ia5882/ia5890 .
www.vtechphones.com Voice menu . . . . . . . . . . . . . . . . . . . . . .35 Remote access commands . . . . . . . . . . . . . . 35 Display screen messages . . . . . . . . . . . . . . .37 Battery information . . . . . . . . . . . . . . . . . . . 38 Battery care and performance .
www.vtechphones.com NEED HELP? This user’s manual has all the feature operation and troubleshooting you will need to install and operate your new VTech phone. Please take the time to review thoroughly to ensure proper installation of this VTech innovative and feature rich product.
www.vtechphones.com 1 Getting started Parts checklist • Telephone base with wall mounting/desktop bracket • Handsets (2) • Charger • Telephone line cord • Base power adapter • Charger power adapter • Belt clips (2) • Batteries (2) • User’s manual To purchase replacement batteries, visit us on the web at www.
www.vtechphones.com 2 Parts checklist Parts checklist for ia5878/ia5884 • Telephone base with wall mounting/desktop bracket • Handsets (3) • Chargers (2) • Telephone line cord • Base power a.
www.vtechphones.com 3 Getting started Parts checklist Parts checklist for ia5882/ia5890 • Telephone base with wall mounting/desktop bracket • Handsets (4) • Chargers (3) • Telephone line cord .
www.vtechphones.com 4 • In stall the tel ephone base away from elec tronic equipm ent such as pe rsonal comp uters, televi sion sets or mi crowave oven s. Avo id exce ssive heat, c old, dust or mo isture. • Conn ect th e powe r and teleph one line cords to the unde rside of the base as il lustrat ed.
www.vtechphones.com 5 Getting started Installation • Use only th e prov ided V Tech batt ery, or equi valent. To p urchase repl acement batt eries, visi t us on the web at www. vtec hphones . com or call us at 1 -800-59 5- 9511 . In Cana da,go to w ww.
www.vtechphones.com 6 Installation Wall mounting bra cket inst allation (optional) Y our tel epho ne bas e com es wit h the wall mou nting /des kto p brac ket inst alle d, read y for d esk top u se. If you p refer to m ount you r tele phon e on th e wall (opti onal), it i s desi gne d to mou nt on a s tand ard tele phon e wall pl ate.
www.vtechphones.com 7 Getting started If you subscribe to DSL service If you receive high speed internet service through your telephone line (commonly referred to as DSL) and you are experiencing inte.
www.vtechphones.com 8 Installation Check for dial tone After the batte ries are charg ed, pick up the handse t and pres s TALK /FLAS H ; yo u sho uld hear a dial tone . If y ou do not, refer to th e Trou blesh ooting sect ion in the b ack o f this user ’s man ual.
www.vtechphones.com 9 Getting started Installation Set handset date and time If you subscribe to caller ID service, the date and time will be set automatically with the rst incoming call. If you do not have caller ID service, you can set the date and time manually: • Press PROG, then press or until DATE/ TIME is dis played .
www.vtechphones.com 10 Telephone operation Han dset layout 1 . T ALK 2. F LA SH 3. C HA N ( c hanne l) 4. R EM OVE 5. A nswer a c all 6. /CID VOL- /VOL+ 7 .
www.vtechphones.com 11 Basic operation Telephone operation Telephone base layout 11. CHARGE/IN USE 12. Message window 13. ANS ON/OFF 14. PLAY/STOP 15. REPEAT/ 16. SKIP/ 17. DELETE/ X 18. VOL / 19. CLOCK 20. SETUP 21. ANNC (announcement) 22. RECORD 23.
www.vtechphones.com 12 Telephone operation • Whenever the phone is in use, ca ll timer will be shown at the top right corner. Han dset op erat ion Ma king c all s • Pres s T ALK / FL ASH , t hen di al the n umbe r . — OR — Dia l the nu mber (p ress to backs pac e ), then pr ess TALK / FL ASH .
www.vtechphones.com 13 Basic operation Telephone operation • Whil e pho ne is not i n use, pre ss to di splay c aller I D infor matio n. • Whil e enter ing nam es or nu mber s into me mor y , pr ess t hen pr ess C HAN / RE MOVE t o delete the l ast c harac ter entere d.
www.vtechphones.com 14 Telephone operation • Only one h andset can be on a ca ll at a time . For example , if H S1 is on a ca ll and HS2 pr esses the TALK/F LASH butt on, OT HER HAND SET ON OR OUT OF RAN GE will displ ay. . Telephone base operation CHARGE/IN USE • Fla shes i n unis on wi th an incom ing ca ll’s ringin g.
www.vtechphones.com 15 Basic operation CALL TRANSFERRED TRANSFERRED CALL Call transfer To transfer an external call from one handset (HS1) to the other handset (HS2): For the ia586 5/ia5 870 1. While o n a c all, p ress SELECT on HS 1 to forwar d the call to HS 2.
www.vtechphones.com 16 For the ia587 8/ia5 884 1. While on a c all, press SELECT on H S1 to forwa rd the call to th e dest inati on han dset. HS1 will show: De stinat ion h andset will ring and s how: 2. Enter the d estin ation hands et num ber yo u wan t to t ransf er.
www.vtechphones.com 17 Basic operation Operating range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC).
www.vtechphones.com 18 Directory Your phone can store 20 (including nine speed dial entries) telephone numbers with names (up to 15 characters for the name and 24 digits for the number in each location) in the handset. Store a directory entry 1. Press P ROG .
www.vtechphones.com 19 Basic operation Char t of ch arac ters Usin g the chart belo w, ent er up to 1 5 char acter s for the n ame yo u’re storin g. An error tone will sound if you tr y t o enter mo re than 15 ch aracte rs.
www.vtechphones.com 20 Directory Edit a directory entry 1. Press . Th e scr een di splay s DIRE CTORY . 2. Press or to s croll alpha betic ally t hroug h entr ies st ored in dir ector y. — O R — Pres s the dial pad k ey for the rst l etter of th e entr y you want to ed it.
www.vtechphones.com 21 Basic operation Directory 4. P ress SELECT . The screen displays ERASE NO YES and the number. The current choice ash es. 5. Press unti l YES ashe s. 6. Press SELEC T . Yo u’ll h ear a conr mation beep . Mov e a direc tory entr y in to sp eed dial 1.
www.vtechphones.com 22 Speed dial Characters by number of key presses Dial key Once Twice 3 times 4 times 5 times 6 times 1 1 2 A B C 2 3 D E F 3 4 G H I 4 5 J K L 5 6 M N O 6 7 P Q R S 7 8 T U V 8 9 W X Y Z 9 0 0 * * # & ‘ , - .
www.vtechphones.com 23 Basic operation Speed dial SPEED EDIT ERASE 8005959511 01 6. Ent er th e t el ep hon e n um be r. Pr es s t hen pr es s C HA N/ RE MO VE to bac ks pa ce an d m ak e co rr ec ti on s. Pres s RED IAL/PA USE t o ente r a pa use ( for ex ample a P w ill b e show n) if neces sary.
www.vtechphones.com 24 Speed dial Delete a speed dial entry 1. Press and h old t he spe ed dia l loc ation key ( 1-9) o f the entry you w ish t o dele te. 2. Whe n th e sc reen displ ays the e ntry you want to delet e, p ress SELEC T . T hen p ress or unti l ERAS E as hes.
www.vtechphones.com 25 Basic operation Your phone has a caller ID (CID) with call waiting feature that works with service from your local phone service provider. Caller ID with call waiting lets you see who’s calling before you answer the phone, even when you’re on another call.
www.vtechphones.com 26 Caller ID About call history (caller ID) Your phone can store up to 45 calls in its caller ID (CID) memory. When the memory is full, the oldest call will automatically be deleted to make room for new incoming call information.
www.vtechphones.com 27 Basic operation Caller ID Delete records from call history Delete a specic call: 1. Locate the r ecord you w ant to dele te fro m cal l hist ory. 2. Press the CH AN/RE MOVE k ey to delet e. You ’ll h ear a conrm ation beep.
www.vtechphones.com 28 Caller ID 2. If yo u wis h to ch ang e ho w the n umb er is s tor ed, pre ss# . The sc reen dis plays any alterna te diali ng seque nces avai lable for thi s call (area code + numbe r; 1 + area co de + n um ber ; nu mb er on ly ; 1+ n umb er ).
www.vtechphones.com 29 Basic operation Answering system operation Audible indicators Your telephone system gives you voice prompts for feature operations and voice conrmations when you press a button or complete an operation. Setting the clock 1. Make s ure th e ans wering syste m is on.
www.vtechphones.com 30 Answering system operation If you choose not to record a personalized announcement, the pre-recorded announcement will say “ Hello, please leave a message after the tone. ” Record your announcement 1. Press ANNC u ntil y ou he ar “An nounc ement.
www.vtechphones.com 31 Basic operation Answering system operation Delete your announcement Pre ss DELETE during announcement playback. The system will use the pre-recorde d announcement until you record a new one. Setup the answering system 1. Pre ss SE TUP u nti l the sys tem a nno unc es th e fea tu re yo u wan t to se t.
www.vtechphones.com 32 Answering system operation Message alert tone <current setting>, to change the setting, press SKIP or REPE AT , to continue setup, press SET UP . To notify the user by beeping when new message(s) has been received. You may turn it on or off (*).
www.vtechphones.com 33 Basic operation To i ncrea se/dec rease spea ker v olume. Listen to, save & delete messages The system automatically saves your messages until you delete them, and can store approximately 11 minutes of messages, memos, and announcements (up to a maximum of 95 messages).
www.vtechphones.com 34 Answering system operation Window display: When: 0 There are no messages. 1-95 Total number of old message(s). 0-95 (ashing) Total number of new message(s) or clock has not been set. 1-95 & F (alternating) Memory is full with total number of new or new and old message(s) recorded.
www.vtechphones.com 35 Basic operation Answering system operation - remote access Accessing the answering system remotely You can access many features of this system remotely from a touch tone phone. 1. Dial y our te lepho ne num ber. 2. When the syste m answer s, enter yo ur remot e access code.
www.vtechphones.com 36 Answering system operation - remote access Function: Command: Review previous message P r e s s 4 during the beginning of the day and time announcement. Delete message Press 3 while message is playing. Press 33 during or after HELP menu announcement to delete all old messages.
www.vtechphones.com 37 Basic operation Screen displays: When: ** RINGING ** There is a call coming in. CONNECTING... The handset is waiting for dial tone. PHONE ON The handset is in use. ** PAGING ** The telephone base is paging the handset. BATTERY LOW The battery needs to be recharged.
www.vtechphones.com 38 Battery information Battery care and performance: After your battery is fully charged, you can expect the following performance: Operation Operating time While in use (talking) up to 5 hours While not in use (standby*) up to 7 days * Ha ndset i s off th e telep hone ba se or ch arger b ut not i n use.
www.vtechphones.com 39 Additional information Troubleshooting If you have difculty operating your phone, the suggestions below should solve the problem. If you still have difculty after trying these suggestions, call VTech Communications at 1-800-595-9511.
www.vtechphones.com 40 Problem Suggestion The battery does not charge in the handset or the handset battery does not accept charge. • Make sure the handset is placed in the charger correctly. The CHARGE light on the telephone base or charger should be on.
www.vtechphones.com 41 Additional information Problem Suggestion The CHARGE/IN USE Indicator on the telephone base is ashing. • This is a signal that the battery is very low, com plete ly deple ted, when the re is no el ectric al cont act b etween the batter y and the t elepho ne ba se or when the te lepho ne lin e is i n use.
www.vtechphones.com 42 Problem Suggestion The telephone does not ring when there is an incoming call. • Make sure the r inger is on . (See page 9). • Make sure the t elepho ne li ne cor d and power adapt er ar e plug ged i n prop erly ( see p age 4) .
www.vtechphones.com 43 Additional information I cannot dial out. • Firs t, try all the ab ove s uggest ions. • Make sure th ere is a dial ton e befor e diali ng. It is norma l if the c ordle ss hand set tak es a sec ond or two to synchr onize with the tel ephone befor e produ cing a dial tone.
www.vtechphones.com 44 Problem Suggestion Troubleshooting There is noise or interference during a telephone conversation. My calls fade out or cut in and out when I am using the cordless handset. • The handse t may be ou t of range. Move it cl oser t o the telep hone base.
www.vtechphones.com 45 Additional information Troubleshooting My caller ID features are not working properly. • Call er ID is a subsc ripti on serv ice. Yo u must subscri be to th is ser vice fr om your local teleph one comp any f or thi s fea ture t o wor k on y our te lepho ne.
www.vtechphones.com 46 The answering system does not answer after the correct number of rings. • Make sure the answer ing s ystem is on . Whe n the answe ring system is on, th e red ligh t on the ANSW ER ON /OFF k ey sh ould b e lit.
www.vtechphones.com 47 Additional information . The messages on the system are very difcult to hear. • Pres s or on the t eleph one ba se to incre ase o r decr ease t he sp eaker volum e. The answering system does not respond to remote commands. • Make sure your “Remot e Acc ess Co de” is corr ect (s ee pa ge 35 and 3 6).
www.vtechphones.com 48 Common cure for electronic equipment. • If the u nit is no t re spondi ng n ormall y, tr y pu tting the cordl ess handse t in the telep hone base or the charg er. If it d oes no t seem to r espond , try the f ollow ing (i n the order liste d): 1.
www.vtechphones.com 49 Additional information Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.
www.vtechphones.com 50 Limited Warranty 6. Pro duc t purc has ed, u sed, s er vic ed, or s hip ped fo r repa ir fro m outs ide t he Uni ted St ates o f Amer ica o r Cana da, or u sed f or co mmer cial o r ins titu tion al pur pos es (in clu ding b ut no t lim ited t o Produ ct s used f or ren tal pu rpo ses); or 7 .
www.vtechphones.com 51 Additional information Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of re, electric shock and injury, including the following: 1. Read and understand all instructions.
www.vtechphones.com 52 FCC, ACTA and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules.
www.vtechphones.com 53 Additional information FCC, ACTA and IC regulations * Remain on the line and briey e�plain the reason for the call before hanging up. * Perform such activities in off-peak hours, such as early morning or late evening. Industry Canada This equipment complies with regulations RSS210 and CS-03 of Industry Canada.
www.vtechphones.com 54 Technical specications Frequency control Crystal controlled PLL synthesizer Transmit frequency Base: 912.75 - 917.10 MHz Handset: 5863.80 - 5872.5 MHz Receive frequency Base: 5863.80 - 5872.5 MHz Handset: 912.75 - 917.10 MHz Channels 30 Nominal effective range Maximum power allowed by FCC and IC.
www.vtechphones.com 55 Index A About call history (caller ID) 26 Answering system operation 29-36 Audible indicators 29 B Battery information 38 Belt clip 7 C Caller ID 25 Call screening/intercept 33 .
www.vtechphones.com 56 c Store a speed dial entry 22 T Technical specications 5 4 Telephone base layout 11 Telephone base operation 14 Telephone operation 10 Temporary tone dialing 15 The RBRC ® s.
c VTECH TELECOMMUNICATIONS LTD. A memb er of THE V TECH GROUP OF COM P ANIES. Distributed in the U.S.A. by VTech Communications, Inc. Beaverton, Oregon Distributed in Canada by VTech Telecommunications Canada Ltd., Richmond, B.C. Copyr ight © 20 07 for VTECH TELECOMM UNICA TIO NS L TD.
U s e r ’ s m a n u a l www.vtechphones.com Mod els: ia58 65/ ia5 870/ ia5878 /ia5 882 / ia58 84/ ia58 90.
Ein wichtiger Punkt beim Kauf des Geräts VTech IA5884 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie VTech IA5884 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für VTech IA5884 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von VTech IA5884 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über VTech IA5884 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon VTech IA5884 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von VTech IA5884 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit VTech IA5884. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei VTech IA5884 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
