Benutzeranleitung / Produktwartung Vision 110 des Produzenten Vidikron
Zur Seite of 88
1080p Digital Light Processing (DLP™) Projector Vision 110 Vision 110/CineWide™ Vision 110/CineWide™ with AutoScope™ 110 VERSION 1.1 INSTALLATION /OPERA TION MANU AL.
.
Vidikron Vision Model 110 Installation/Opera tion Manual iii PRE L IMINAR Y TWO YEAR LIMITED WARRANTY For Projectors, Video Pr ocessors and Controllers Congratulations on y our purchase of a Vidikro n.
iv Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y This warranty begins on the effective date of delivery t o the end user. Fo r your conven ience, keep the origin al bill of sale as evidence of the purchase date. Pl e a se f i l l o u t a nd m a i l y o u r wa r r a nt y r e gi s t ra t i o n c a r d .
Vidikron Vision Model 110 In stallation/Operation Manual v PRE L IMINAR Y To locate the name and address of the ne arest Vidikron Authoriz ed Service Center, or for additi onal information about this .
vi Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Thank you for your purchase of th is quality Vidikron video projecto r! It h as been designed to provide you with the qua lity of v ideo that is expected in a home theater.
Vidikron Vision Model 110 In stallation/Operation Manual vii PRE L IMINAR Y Manufacturer’s Name: Vidikron, a su bsidiary of Planar Systems, Inc. Manufacturer’s Addre ss: 2900 Faber Street, Union C.
viii Vidikron Vision Model 1 10 Installation/Operation Manual PRE L IMINAR Y NOTE: This equipment has been tested and fo und to comply with the limits for a Class B digital device, pursuant to Part 15 of t he FCC Rules. These li mits are designed to provide reason able prot ec tion against harmful inte rference in a residential instal latio n.
Vidikron Vision Model 110 In stallation/Operation Manual ix 1 Table of Contents PRE L IMINAR Y TWO YEAR LIMIT ED WARRANTY ................ ............. ................ ............. ................ ............. ...... iii Important Safety Instr uctions .
Table of Contents x Vidikro n Vision Model 110 Installati on/Operation Manual PRE L IMINAR Y Installing the O ptional C ineWide L ens Mount .. .......... .......... ........... ........ .......... ........... ........ .......... ... ... 22 Installing the Auto Scope Lens M otor (Vision 110 /CineWide w ith AutoScope) .
Table of Contents Vidikron Vision Model 110 In stallation/Operation Manual xi PRE L IMINAR Y 5. Maintenance and Troublesh ooting .......... ............. ................ ................ ............. ............ 59 Lamp Re placemen t ....... ......
Table of Contents xii Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Notes:.
Vidikron Vision Model 110 Insta llation/Operation Manual xiii PRE L IMINAR Y 1 List of Figures 2-1. Vision 110 Front/Botto m/Side View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2-2. Vision 11 0 Rear Pa nel .
List of Figures xiv Vidikron Vision Model 110 Installa tion/Operation Manual PRE L IMINAR Y Notes:.
Vidikron Vision Model 110 In stallation/Operation Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s Manual descr ibes ho w to install, set up and oper ate th e Vidikron Vision Model 110 DLP Projector. Throughout this man ual, th e Vidikron Vision Model 110 DLP Pr ojector is referred to simply as the “Vision 110.
Introduction 2 Vidikron Vision Model 110 Installa tion/Operation Manual PRE L IMINAR Y Graphic Conv entions: These symbols appear in numerous places thr oughout the manual , to emphasize points tha t you must keep in mi nd to avoid problems with your equipment or injury: 1.
Introduction Vidikron Vision Model 110 In stallation/Operation Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits Vidikron further solidifies its leadership role with the introduction of the Vision 110 Digital Light Processing (DLP™) Pro jector.
Introduction 4 Vidikron Vision Model 110 Installa tion/Operation Manual PRE L IMINAR Y Parts List Your Vision 110 is shipped with the follo wing items. If any items are missing or damaged, please contact your Vidikron deal er or Vidikron Custom er Service at ( 888 ) 4VIDIKRON.
Vidikron Vision Model 110 In stallation/Operation Manual 5 PRE L IMINAR Y 2.1 Vision 110 at a Glance Figure 2-1 shows th e key Vision 110 components. Figure 2-1. Vision 110 Front/Bottom/Sid e View 1. PRIMARY PR OJECTION LENS 2. VIDIKRON L OGO The logo can be rotated to ma tch the projector orient ation: inverted (ceiling-mo unted) or upright.
Controls and Functions 6 Vidikron Vision Model 110 Installa tion/Operation Manual PRE L IMINAR Y 2.2 Vision 110 Rear Panel Figure 2-2 show s the Vision 110 r ear panel. Figure 2-2. Vision 110 Rear Panel 1. LAMP C OVER Remove this cover to ac cess the lamp compartment.
Controls and Functions Vidikron Vision Model 110 In stallation/Operation Manual 7 PRE L IMINAR Y 5. LEFT BUTTON Used to direct-select inputs or move the me nu cursor left in the OSD.
Controls and Functions 8 Vidikron Vision Model 110 Installa tion/Operation Manual PRE L IMINAR Y 2.3 Vision 110 Rear Connector Panel Figure 2-3 shows the rear connector panel on the Vision 110 , and the paragraphs that fol low describe them. Figure 2-3.
Controls and Functions Vidikron Vision Model 110 In stallation/Operation Manual 9 PRE L IMINAR Y 7. HDMI I (1) / HDMI II (2) (Digital) Two, HDCP-compliant digital video inputs for connecting a DVD player, HD tuner or other digital video source (up to 10 8 0p) with a DVI or HDMI output.
Controls and Functions 10 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 2.4 Vision 110 Remote Control Figure 2-4 show s the Vision 110 r emote control , and the paragraph s that follow descri be its functionality.
Controls and Functions Vidikron Vision Model 110 In stallation/Operation Manual 11 PRE L IMINAR Y 1. LIGHT Press to illuminate the buttons. 2. ON / OFF Use these buttons to turn the projector on or off. 3. Source Selection Buttons: VID Press to select Composite video input as the source.
Controls and Functions 12 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 6. Memory Preset Buttons: CUST1 Press to recall settings for the current input from the “Custom 1” memory preset. ISF NIGHT Press to recall settings for the current in put from the “ISF Nig ht” memory preset.
Vidikron Vision Model 110 In stallation/Operation Manual 13 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote control, press up on the batter y cover retainer clip and lift off the cover. Install the two AAA batteries with the correct polarity a nd then replace t he cover.
Installation 14 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick overview of the Vision 110 installation process. The sections following this one provide deta iled instructions. Installation should be performed by a qualified custom video installation specialist.
Installation Vidikron Vision Model 110 In stallation/Operation Manual 15 PRE L IMINAR Y 3.3 Installation Considerations Proper installation of your projector will ensure the quality of y our display.
Installation 16 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Throw Distance Throw distance is the distance measured from th e front of the projector to the screen.
Installation Vidikron Vision Model 110 In stallation/Operation Manual 17 PRE L IMINAR Y Vertical and Horizontal Position Proper placeme nt of the projector relative to the screen will yield a rectangul ar, perfectly-centered image that completel y fills the screen.
Installation 18 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Figure 3-4. Horizontal Lens Shift (EXAMPLE ONLY) 0% Screen Center 100% Width Lens Shift (1.0 x W) 50% Width Lens Shift (0.5 x W) Screen Width (W) Note: This is a general example of l ens shift.
Installation Vidikron Vision Model 110 In stallation/Operation Manual 19 PRE L IMINAR Y Table 3-4 lists the lens shift limits for each available Vision 110 lens, as percentages and absolute mea surements wi th a 100 x 56 inch (1 .
Installation 20 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Other Considerations Othe r considerations and tips that can help impro ve your installation : • Keep the ambient tem perature con stant and below 35 °C (95°F).
Installation Vidikron Vision Model 110 In stallation/Operation Manual 21 PRE L IMINAR Y 3. Remove the Le ns Cavity Front Cover. 4. Remove the Rear Lens Cap. 5. Hold the lens a ssembly with the motor facing the right side of th e Lens Cavity. Carefully insert the back of the lens assembly into the hole in the lens flange.
Installation 22 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 6. Lock the lens in plac e by turning the Lens Locking Nut (to the left of the lens) 1 8 0 degrees counter-clockwise. (Use a 6.0mm hex wrench.) 7. Remove the Front Lens Cap.
Installation Vidikron Vision Model 110 In stallation/Operation Manual 23 PRE L IMINAR Y Installing the AutoScope Lens Motor (Vision 110/CineWide with AutoScope) Figure 3-6 shows th e Vision 110/Cine Wide with AutoScope moto r assembly. Figure 3-6. Vision 110/CineWid e with AutoScope Motor Assembly - Exploded View 1.
Installation 24 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Remove Projector Front Feet: Place the projector upside do wn on a blanket or other soft surfac e.
Installation Vidikron Vision Model 110 In stallation/Operation Manual 25 PRE L IMINAR Y Figure 3-7. Vision 110 with Ceiling Mount Adapter s/Projector Stands DO NOT OVER-TIGHTEN THE SCREWS.
Installation 26 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Install Lens Motor: Position the Auto Scope Lens Motor (item #1) as shown in Figure 3- 8 . Line up the mounting holes on the lens motor housing with those on the underside of the projector.
Installation Vidikron Vision Model 110 In stallation/Operation Manual 27 PRE L IMINAR Y Installing the Fixed CineWide Base Plate (Vision 110/CineWide) To install the fixed CineWide base plate on a Vision 110/Cine Wide: 1. Place the projector upside down on a blanket or other soft surface.
Installation 28 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 3.6 Mounting the Vision 110 There are several methods fo r mounting the projecto r. Depending on yo ur chosen installation, one method may be more suitable than ano ther.
Installation Vidikron Vision Model 110 In stallation/Operation Manual 29 PRE L IMINAR Y 3.7 Connections to the Vision 110 Proceed as follows to conn ect the Vision 110 to your video sources, exte rnal controller(s) – if present – and AC power. When connectin g your equipment: • Turn off a ll equipment before making a ny connecti ons.
Installation 30 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Digital (DTV) RGB or Component Video Connections: See Figure 3- 11 and Figure 3-12 .
Installation Vidikron Vision Model 110 In stallation/Operation Manual 31 PRE L IMINAR Y Figure 3-12. Digital (DTV) RGB or Component Video Connections (HD3) HD3 (VGA / Y -Pb-Pr) HD3 (VGA / Y -Pb-Pr) Gr.
Installation 32 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Analog (Computer) RGB Connections: See Figure 3-13. Figure 3-13.
Installation Vidikron Vision Model 110 In stallation/Operation Manual 33 PRE L IMINAR Y S-Video/Composite Video Connections: See Figure 3-14. Figure 3-14. S-Video and Co mposite Video Connections HD3 (VGA / Y -Pb-Pr) HD3 (VGA / Y -Pb-Pr) DVD Player, VCR, Satellite Receiver, Laser Disc etc.
Installation 34 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y RS-232 Controller Connection Use a “null-modem” 9-pin RS-232 cable to connect a PC or home theater con trol/automation system (if present) to the RS-232/4 8 5 port on t he Vision 110; see Figure 3-15 .
Installation Vidikron Vision Model 110 In stallation/Operation Manual 35 PRE L IMINAR Y Connecting 12-volt Trigger Outputs to External Equipment If your Vision 110 is equipped with a Ci neWide with AutoScope system, connect the AutoScope lens motor to a 12-volt trigger o utput on the Vision 110; see Figure 3-16 .
Installation 36 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Connecting an External IR Receiver to the Vision 110 If infrared signals from the remote control cannot rea ch th.
Installation Vidikron Vision Model 110 In stallation/Operation Manual 37 PRE L IMINAR Y 3.8 Turning on the Power 1. Turn on your source compo nents. 2. If this is an AutoScope-e quipped projector , turn on the main powe r switch at the rear of the AutoScope le ns motor.
Installation 38 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 3.10 Primary Lens Adjustments To access the motorized lens co ntrols, use the FOCUS, ZOOM an d LENS buttons on the Vision 110 remote control unit (described on page 12 ).
Installation Vidikron Vision Model 110 In stallation/Operation Manual 39 PRE L IMINAR Y 3.11 Installing and Adjusting the CineWide Anamorphic Lens If you are inst alling a CineWide -equipped projector, proceed as follo ws to install and adjust the anamorphic lens.
Installation 40 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 3. Secure the Anamorph ic Lens Holder to the plate using the He x Bolts/Washers (item #6) and Yaw/X Adjustment Levers that you removed in Step 1.
Installation Vidikron Vision Model 110 In stallation/Operation Manual 41 PRE L IMINAR Y Configure Lens Motor Trigger CineWide with AutoScope maintains consta nt image height independent of the aspect ratio, while using the full displa y resolution of the projector.
Installation 42 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Adjusting the Height (Y): With the white field still on-screen , loosen the Height/Y Adjustment T-Screws on either side of the le ns.
Installation Vidikron Vision Model 110 In stallation/Operation Manual 43 PRE L IMINAR Y Adjusting the Yaw: Loosen the Yaw/X-Adjustment Lever s to allow the lens to pivot freely from side to side.
Installation 44 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Adjusting the Geometry: 1. Input an anamorphic cross-hatc h test pattern to the pr ojector. 2. Unscrew the Anamorph ic Lens just en o ugh to allow it to rotate freely.
Vidikron Vision Model 110 In stallation/Operation Manual 45 PRE L IMINAR Y 4.1 Using the On-Screen Menus To display the Main Menu, press the MENU button on the remote co n trol (Figure 2- 4) or projector rear panel ( Figure 2-2 ). To select a me nu item, use the and buttons on the remote co nt rol or projector rear panel to highlight it.
Operation 46 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Figure 4-1. Vision 110 OSD Menu Structur e Service Test Video Horizo ntal Ram p Vertical Ramp Color Bars 1 Color Bar.
Operation Vidikron Vision Model 110 In stallation/Operation Manual 47 PRE L IMINAR Y Main Menu The Main Menu is the starting point for accessing all projector functions. (The Calibration and Service men us are hidden an d not accessible until you en ter a passcode.
Operation 48 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Table 4-1. Aspect Ratio Settings Aspect Ratio Remote Control Key Description 16:9 16:9 Select 16:9 to view 16:9 DVDs and HDTV programs in their native aspect ratio. 4:3 images are stretched horizontally to fit a 16:9 screen.
Operation Vidikron Vision Model 110 In stallation/Operation Manual 49 PRE L IMINAR Y Picture Use the controls in the Picture Men u to calibr ate your Vision 110 for optimum pic ture quality. The Vision 110 has been designed to incorpor ate setup and calibratio n standards established by the Imaging Science Founda tion (ISF).
Operation 50 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Although it may be possible to obtain satisfactory picture quality using the naked eye and regular program mate rial.
Operation Vidikron Vision Model 110 In stallation/Operation Manual 51 PRE L IMINAR Y Contrast: On your external test pattern source, sele ct a stepped, gray-b ar pattern like the one shown in Figure 4-3 . Figure 4-3. Typical Gray Bar Pattern for Adjusting Contrast Select Contrast and press ENTER or SELEC T .
Operation 52 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Select Color and press ENTER or SELECT . While loo king at the colo r bar pattern thro ugh a blue filter, ad just th.
Operation Vidikron Vision Model 110 In stallation/Operation Manual 53 PRE L IMINAR Y Sharpness: “Sharpness” is the amoun t of high-frequ ency detail in the image. To adjust sharpness, select Sharpness fr om the Picture menu and press ENTER or SELECT .
Operation 54 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Overscan: Image Overscan pushes th e outside edge of th e active picture area of th e video signal out beyond the edge of the display area.
Operation Vidikron Vision Model 110 In stallation/Operation Manual 55 PRE L IMINAR Y Calibration Use the Calibration menu to perform ad vanced picture qual ity adjustments.
Operation 56 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y ISF Night - Input Color: The In put Color contr ols are similar t o those in the Displa y Color menu (see above), but adjust the color balance o f the incoming signal.
Operation Vidikron Vision Model 110 In stallation/Operation Manual 57 PRE L IMINAR Y Service Use the Service menu to access advanc ed projector config uration settings. This m en u should be used by ISF-certified technicians only . Test Video: Select Test Video from the Service Menu to access the internal test patterns on the Vision 110.
Operation 58 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Triggers: Select Triggers from the Service menu to configure the 12-vol t trigger outputs. You can assign one or more trigger outpu ts to each aspect ratio. Those triggers are then activated by selecting that aspect ratio .
Vidikron Vision Model 110 In stallation/Operation Manual 59 PRE L IMINAR Y 5.1 Lamp Replacement The lamp should be r eplaced when it re aches the end o f its life (typically 20 00 hours), or sooner if a noticeable degr adation in brightness occurs. When you replace a lamp, you should replace the fil ters as well.
Maintenance and Troubleshooting 60 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 6. Install the new lamp mo dule. 7. Replace the lamp cover and re-tighten al l screws.
Maintenance and Troubleshooting Vidikron Vision Model 110 In stallation/Operation Manual 61 PRE L IMINAR Y 5.3 Troubleshooting Tips Table 5-1 provides some general guidelin es for tr oubleshooting problems y ou may encounter with th e Vision 110.
Maintenance and Troubleshooting 62 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Notes:.
Vidikron Vision Model 110 In stallation/Operation Manual 63 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the Vision 110 with a home theate r automa tion/control sy stem or a PC running terminal emulatio n software, connect it to your contro l system or PC as sh own in Figure 3-15 .
Serial Communications 64 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Table 6-1 lists th e serial comma nds supported by the Vision 11 0 and the responses it sends back to the control system or PC.
Serial Communications Vidikron Vision Model 110 In stallation/Operation Manual 65 PRE L IMINAR Y Image Preset Commands SISF 0 Loads “ISF Night” image preset ISF Night SISF 1 Loads “ISF Day” im.
Serial Communications 66 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Notes:.
Vidikron Vision Model 110 In stallation/Operation Manual 67 PRE L IMINAR Y 7.1 Vision 110 Specifications Table 7-1 lists the Vision 110 specifications.
Specifications 68 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Brightness and Contrast: Cinema Stan dards Measurement System (CSMS) Specifications - Brightness: 5 8 .3 foot-Lamberts (fL) - Contrast Ratio: 320:1 These measurements are take n from the projector in a control led, home theater environment.
Specifications Vidikron Vision Model 110 In stallation/Operation Manual 69 PRE L IMINAR Y 7.2 Vision 110 Dimensions Figure 7-1 shows th e Vision 110 dimension s (all dimensions are in inches). Figure 7-1. Vision 110/CineWid e with AutoScope Dimension s 0 2.
Specifications 70 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y 7.3 Supported Timings Table 7-2 lists th e signal types supported by each input on the Vision 110.
Specifications Vidikron Vision Model 110 In stallation/Operation Manual 71 PRE L IMINAR Y 4 8 0/60i 720x4 8 7 59.94 15.734 13.500 √ √ √ √ 4 8 0/60p 720x4 8 3 59.94 31.469 27.000 √√√ – 576/50i 720x576 50.00 15.625 14.750 √ √ √ √ 576/50p 720x576 50.
Specifications 72 Vidikron Vision Model 110 Installation/Operation Manual PRE L IMINAR Y Notes:.
.
Vidikron 2900 F aber Street Union City , CA 94587 510-324-5900 F ax 510-324-5905 1-888-4-VIDIKRON www.vidikron.com SERIAL NUMBER 020-0 8 34-00 rev. B December 2007.
Ein wichtiger Punkt beim Kauf des Geräts Vidikron Vision 110 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Vidikron Vision 110 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Vidikron Vision 110 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Vidikron Vision 110 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Vidikron Vision 110 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Vidikron Vision 110 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Vidikron Vision 110 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Vidikron Vision 110. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Vidikron Vision 110 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
