Benutzeranleitung / Produktwartung KTS230 des Produzenten Venturer
Zur Seite of 34
.
- 1 - Important Safety Instructions WARN ING The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock.
- 2 - Important Safety Instructions 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference.
- 3 - Table of Contents Repeat Playback ........................................ 22 Repeating a title/chapter (DVD) ............................ 22 Repeating a single track/whole disc (CD) ........... 22 Repeating a specific section (DVD) ............
- 4 - The Unit can playback. Region Management Information Region Management Information: This Unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond to the Region number of this Unit, this Unit cannot play that disc.
- 5 - Before You Start To install Batteries 1. Open the battery door. Battery Replacement When batteries become weak, the operating distance of the Remote Control is greatly reduced and you will need to replace the batteries.
- 6 - Pa rts and Functions (Continued on next page) Remote Control 1) STANDBY / ON button Turns the Unit on and puts it in standby mode. 2) RETURN button Return to the normal operation after using the SETUP menu. 3) Number (0 - 9) and (+10) buttons Use when creating programs, and entering a parental level password.
- 7 - 17) FUNCTION button Display the FUNCTION screen where you can check or change various setting. 18) MUTE button To mute the sound. 19) GOTO button Skip directly to a specific location on a DVD disc. 20) VOCAL CANCEL button Change the Vocal mode. 21) MIC EFFECT button Change the voice effect.
- 8 - 1) Remote Sensor Receive the remote control unit signals. 2) Display window Display system information. 3) AV IN / TAPE / KARAOKE indicators When AV IN / TAPE / KARAOKE is selected, the light will illuminate. 4) Cassette Door Open or close door by pressing the STOP/EJECT button.
- 9 - Pa rts and Fucntions 25) Handle 26) Disc tray Open the tray by pressing OPEN button. Place a disc on the disc tray, label side up. Top Panel 26 27 25 OPEN Rear Cabinet 27) OPEN button Use to open the disc tray.
- 10 - Region (Local) Number Error Indicator If the region (local) number of the disc that you attempt to play differs from the region number of the Unit, "Invalid Region" appears on the TV screen. (The disc cannot be played). If no disc is loaded when the Main Unit is switched on.
- 11 - Setup (continued to next page) A. Connecting a TV The Unit can be connected to your TV in several different ways, depending on the design of your TV. RCA Audio/Video cable Use the Audio/Video cable (supplied). Connect the VIDEO OUT and left/right AUDIO OUT jacks on the unit to the VIDEO IN and left right AUDIO IN jacks on your TV.
- 12 - Setup B. Connecting a VCR 1. Using the supplied Audio/Video cable, connect the yellow plug from VIDEO OUT jack on your Unit to VIDEO IN jack on your T V, connect the left/right AUDIO OUT jacks on your Unit to left/right AUDIO IN jacks on your T V .
- 13 - Setup Turning on the Unit and TV 1) Press the STANDBY /ON button on the front panel or on the remote control to turn the Unit ON, the Volume knob indicator light up, the standby indicator goes off. • Whenever the AC power cord is connected, the standby indicator lights up.
- 14 - (continued on next page) Playing a Disc This owner ’s manual explains the basic instructions of this DVD Unit. Some DVD discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD Unit may not respond to all operating commands.
- 15 - Playing / Recording a Tape Playing a Tape 1. Press the STOP/EJECT button and load a cassette into the cassette compartment. 2. Press the PL AY Y button to begin playback. Pausing playback Press the STOP/EJECT button. To interrupt playback Press the PA USE button.
- 16 - (continued on next page) Slow-motion play 1. Press the SL OW or SL OW W button in the play mode. . • Two speeds are available . Each time SL OW or SL OW W button is pressed, the speed of slow-motion playback changes in the following sequence: 2.
- 17 - DVD Angle selection Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are playing a DVD with different angles recorded, press the ANGLE button to view the number of the current angle.
- 18 - Special Functions DVD DISPL AY function Using DISPL AY , you can check and change the current settings of the following items : ANGLE, AUDIO and SUBTITLE. • While the disc is playing, press the DISPL AY button to display the screen shown belo w.
- 19 - Locating a specific title If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title numbe r. 1. In stop mode, press the GOTO button. 2. Press , or button to highlight a specific field and press the corresponding number button(s) for the title you ou want.
- 20 - DVD CD Locating a specific time Y ou can move to a specific location by entering its corresponding time (hours, minutes, seconds) 1. Press the GOTO button. 2. Press or button to highlight time. . 3. Press the corresponding number buttons for the setting point you want.
- 21 - Programmable memory The two types of programmed playback provided by this Unit are title programmed playback and chapter programmed playback. Title / Chapter programmed playback 1. Press the MEMORY button while the disc is stopped. 2. Enter the title numbers in - - .
- 22 - Y ou can play a specific title or chapter repeatedl y. (Title repeat, chapter repeat, A-B repeat) Repeating a chapter Y ou can play the same chapter repeatedl y. 1. While the disc is playing, press the REPE AT DISC button until the “ Repeat Chapter ” indicator displays on the screen .
- 23 - This Unit will play MP3 and Picture files recorded on CD-R discs . Playing a MP3 file disc 1. Press OPEN button on the top , the disc tray opens. 2. Insert a MP3 file disc on the disc tray with the label side up. 3. Press the disc tray's lid to close.
- 24 - Playing MP3 and Picture File Disc Playing a Picture file disc 1. Press the OPEN button, the disc lid opens. 2. Insert a Picture CD on the disc tray with the label side up. 3. Press the disc lid to close. 4. The unit will take a short while to load the disc and automatically begin playback.
- 25 - LANGU A GE setting 1. Press the FUNCTION b utton until D VD appears on the display . 2. Press the STOP button so that no disc is playing. 3. Press the SETUP button. 4. Use or button to select the Language, then press the ENTER button. 5. Use or button to English, then press the ENTER b utton.
- 26 - 4:3 Pan Scan • When wide-screen video material is played, this mode clips the right and left sides of the image so that it can be view ed on a con ventional TV screen. • Some wide-screen D VDs that do not per mit P an Scan mode playback are automatically played in letterbox mode (black bands top and bottom).
- 27 - Customizing the Function Settings Brightness 1. Press the SETUP button. 2. Use or b utton to select Video , then press the ENTER button. 3. Use or button to select Brightness, and then press the ENTER button. 4. Use or button to shift and select the Off/On, then press the ENTER button.
- 28 - A UDIO setting Digital Out 1. Press the SETUP button. 2. Use or button to select Audio, press the ENTER button. 3. Use or button to select Digital Out, and then press the ENTER button repeatedly to select Digital Out type. 4. T o exit the FUNCTION SETUP MENU and return to the nor mal screen, press the RETURN button.
- 29 - Customizing the Function Settings RA TING setting Password/Parental lock D VD discs equipped with the passw ord function are rated according to their content. The contents allowed b y a parental lock le vel and the wa y a D VD disc can be controlled may v ar y from disc to disc.
- 30 - Factory Set If you want to return the initial language setting to the factory default, do the following: 1. Press the SETUP button. 2. Use or button to select the Rating, then press the ENTER button. 3. Use or button to shift and select the F actor y Set, then press the ENTER button.
- 31 - Code AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DE DZ EL EN EO ES ET EU FA FI FJ FO FR Code FY GA GB GL GN GU HA HI HR HU HY IA IE IK IN IS IT IW JA JI JW KA KK KL KM KN KO .
- 32 - Cleaning the Unit • Be sure to turn the Unit off and disconnect the AC power cord before maintaining the Unit. • Wipe the Unit with a dry soft cloth. If the surfaces are e xtremely dir ty , wipe clean with a cloth which has been dipped in a weak soap-and-w ater solution and wrung out thoroughly , then wipe with a dry cloth.
- 33 - SYMPT OM CA USE (AND REMED Y) • Check that the equipment are connected securely . • Make sure that you've selected the correct equipment on the system. • The system is in pause mode or in Slow-motion Pla y mode. Press the PLA Y button to return to normal play mode.
Ein wichtiger Punkt beim Kauf des Geräts Venturer KTS230 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Venturer KTS230 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Venturer KTS230 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Venturer KTS230 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Venturer KTS230 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Venturer KTS230 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Venturer KTS230 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Venturer KTS230. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Venturer KTS230 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
