Benutzeranleitung / Produktwartung Agila (2012) des Produzenten Vauxhall
Zur Seite of 137
0 - 1 Owner’s Manual Model Y ear 2012 .5 Edition: May 2012 TS 1 669-B-12 VAUXHALL Agila Owner’ s M anua l Model Y ear 2012.5 Edition: May 2012 TS 1669-B-12.
Introduction .................................... 2 In brief ............................................ 6 Keys, doors and windows ............ 18 Seats, restraints ........................... 27 Storage ........................................ 41 Instruments and controls .
2 Introduction Introduction.
Introduction 3 Vehicle specific data Please enter your vehicle's data on the previous page to keep it easily accessible. This information is available under the sections "Service and maintenance" and "Technical data" as well as on the identification plate.
4 Introduction 9 Warning Text marked 9 Warning provides information on risk of accident or injury. Disregarding this information may lead to injury. Caution Text marked Caution provides information on possible damage to the vehicle. Disregarding this information may lead to vehicle damage.
Introduction 5.
6 In brief In brief Initial drive information Vehicle unlocking Unlocking with key Turn the key in the driver's door lock to the front. The tailgate is unlocked when the driver's door is opened. Unlocking with radio remote control Press button c to unlock the doors and load compartment.
In brief 7 Seat adjustment Seat positioning Pull handle, slide seat, release handle. Seat adjustment 3 28, Seat position 3 28. 9 Danger Do not sit nearer than 25 cm from the steering wheel, to permit safe airbag deployment. Seat backrests Pull lever, adjust inclination and release lever.
8 In brief Head restraint adjustment Press release button, adjust height, engage. Head restraints 3 27. Seat belt Pull out the seat belt and engage in belt buckle. The seat belt must not be twisted and must fit close against the body. The backrest must not be tilted back too far (maximum approx.
In brief 9 Exterior mirrors Swivel lever in required direction. Exterior mirrors 3 24. Select the relevant exterior mirror and adjust. Electric adjustment 3 24, Convex exterior mirrors 3 24, Folding exterior mirrors 3 24, Heated exterior mirrors 3 25.
10 In brief Instrument panel overview.
In brief 11 1 Side air vents ....................... 77 2 Door window defroster vents .................................... 77 3 Remote control for infotainment system ............. 48 4 Turn signals, headlight flash, low beam and high beam ...........
12 In brief Front fog lights Operated with the > button. Front fog lights will only operate when the headlights or sidelights are switched on. Headlight flash, high beam and low beam headlight flash = pull lever high beam = push lever low beam = pull lever High beam 3 62, Headlight flash 3 62.
In brief 13 Hazard warning flashers Operated with the ¨ button. Hazard warning flashers 3 63. Horn Press j . Washer and wiper systems Windscreen wipers MIST = misting function OFF = off INT = intermittent operation LO = slow HI = fast For a single swipe, move lever up from position OFF .
14 In brief Windscreen washer system Pull lever. Windscreen washer system 3 49, Washer fluid 3 95. Rear window wiper and washer system Turn f = washer fluid is sprayed onto the rear window OFF = off I.
In brief 15 Demisting and defrosting the windows Turn air recirculation mode 4 off. Set temperature control to warmest level. Cooling n on. Set air distribution control to V .
16 In brief Starting off Check before starting off ■ Tyre pressure and condition 3 106, 3 129. ■ Engine oil level and fluid levels 3 93. ■ All windows, mirrors, exterior lighting and number plates are free from dirt, snow and ice and are operational.
In brief 17 Parking ■ Always apply parking brake without pressing release button. Apply as firmly as possible on a downhill slope or uphill slope. Operate foot brake at same time to reduce operating force. ■ Switch off the engine and ignition. Push key into ignition lock, turn to LOCK and remove.
18 Keys, doors and windows Keys, doors and windows Keys, locks ................................... 18 Doors ........................................... 22 Vehicle security ............................ 23 Exterior mirrors ............................ 24 Interior mirrors .
Keys, doors and windows 19 Radio remote control battery replacement Replace the battery as soon as the range reduces. Remove screw on key cover and remove the transmitter. Prise apart both halves of transmitter with a suitable screwdriver. Batteries do not belong in household waste.
20 Keys, doors and windows Central locking system with radio remote control Press button c . Configured to unlock only the driver`s door by pressing button c once and to unlock all doors and tailgate by pressing button c twice. If no door is opened within approx.
Keys, doors and windows 21 Press button m . front = lock rear = unlock Interior lock Locks or unlocks the doors from inside the vehicle. To lock front doors from outside the vehicle, press the interior lock and keep exterior door handle raised when closing the door.
22 Keys, doors and windows Doors Load compartment Opening Press the button below the handle and lift the tailgate. 9 Warning Do not drive with the tailgate open or ajar, e.g. when transporting bulky objects, since toxic exhaust gases could enter the vehicle.
Keys, doors and windows 23 Vehicle security Anti-theft locking system 9 Warning Do not use the system if there are people in the vehicle! The doors cannot be unlocked from the inside. The system deadlocks all the doors. All doors must be closed or the system cannot be activated.
24 Keys, doors and windows Exterior mirrors Convex shape The convex exterior mirror reduces blind spots. The shape of the mirror makes objects appear smaller, which will affect the abilty to estimate distances. Manual adjustment Adjust mirrors by swivelling lever in required direction.
Keys, doors and windows 25 Heated Operated by pressing the Ü button. Heating works with the engine running and is switched off automatically after a short time. Interior mirrors Manual anti-dazzle To reduce dazzle, adjust the lever on the underside of the mirror housing.
26 Keys, doors and windows Operate the switch for the respective window by pushing to open or pulling to close. Pushing or pulling switch briefly: window moves up or down as long as switch is operated. For automatic opening of the driver's door window, push the switch down fully and release it.
Seats, restraints 27 Seats, restraints Head restraints ............................ 27 Front seats ................................... 28 Seat belts ..................................... 30 Airbag system .............................. 33 Child restraints .
28 Seats, restraints Front seats Seat position 9 Warning Only drive with the seat correctly adjusted. ■ Sit with your buttocks as far back against the backrest as possible. Adjust the distance between the seat and the pedals so that your legs are slightly angled when pressing the pedals.
Seats, restraints 29 9 Danger Do not sit nearer than 25 cm from the steering wheel, to permit safe airbag deployment. Seat backrests Pull lever, adjust inclination and release lever. Allow the seat to engage audibly. Do not lean on seat when adjusting.
30 Seats, restraints Seat belts The seat belts are locked during heavy acceleration or deceleration of the vehicle, holding the occupants in the sitting position. Therefore, the risk of injury is considerably reduced. 9 Warning Fasten seat belt before each trip.
Seats, restraints 31 Triggered belt tensioners must be replaced by a workshop. Belt tensioners can only be triggered once. Notice Do not affix or install accessories or other objects that may interfere with the operation of the belt tensioners.
32 Seats, restraints Removing To release belt, press red button on belt buckle. Seat belts on the rear seats The seat belt for the middle seat has a twin buckle arrangement. Engage the smaller latch plate (1) into the correct buckle, then pull the seat belt across and audibly engage the buckle marked CENTER (2).
Seats, restraints 33 Airbag system The airbag system consists of a number of individual systems. When triggered the airbags inflate within milliseconds. They also deflate so quickly that it is often unnoticeable during the collision. 9 Warning If handled improperly the airbag systems can be triggered in an explosive manner.
34 Seats, restraints 9 Warning Optimum protection is only provided when the seat is in the proper position 3 28. Keep the area in which the airbag inflates clear of obstructions. Fit the seat belt correctly and engage securely. Only then the airbag is able to protect.
Seats, restraints 35 Front passenger airbag system can be deactivated via a lock on the side of the instrument panel, visible when the front passenger door is open. Use the ignition key to choose the position: * = front passenger airbags are deactivated and will not inflate in the event of a collision.
36 Seats, restraints Child restraints Child restraint systems We recommend the Vauxhall child restraint system which is tailored specifically to the vehicle. When a child restraint system is being used, pay attention to the following usage and installation instructions and also those supplied with the child restraint system.
Seats, restraints 37 Child restraint installation locations Permissible options for fitting a child restraint system Weight and age class On front passenger seat On rear outboard seats On rear centre seat active airbag deactivated airbag Group 0: up to 10 kg or approx.
38 Seats, restraints Permissible options for fitting an ISOFIX child restraint system Weight class Size class Fixture On front passenger seat On rear outboard seats On rear centre seat Group 0: up to .
Seats, restraints 39 ISOFIX size class and seat device A – ISO/F3 = Forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kg. B – ISO/F2 = Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg.
40 Seats, restraints ISOFIX child restraint systems Fasten vehicle-approved ISOFIX child restraint systems to the mounting brackets. When using ISOFIX mounting brackets for seat mounting, universally approved child restraint systems for ISOFIX may be used.
Storage 41 Storage Storage compartments ................ 41 Load compartment ....................... 43 Roof rack system ......................... 46 Loading information ..................... 46 Storage compartments Instrument panel storage To open the instrument panel upper tray, lift front edge of lid.
42 Storage Glovebox The glovebox should be closed while driving. Cupholders A cupholder is located in the front of the centre console. An additional cupholder is located at the back of the console. Sunglasses storage Fold down to open. Do not use for storing heavy objects.
Storage 43 Load compartment Folding down rear backrests Remove load compartment cover as necessary. Push head restraints down by pressing the catch. Put the seat belts of the outer seats into belt guides. Release the centre seat belt detachable connector by inserting the ignition key into the slot.
44 Storage On the one piece backrest, pull both release levers and fold down the backrest onto the seat cushion. To fold up, raise backrests and guide them into upright position until they engage audibly. Pull the centre seat belt connector latch plate from the roof holder slot.
Storage 45 The cover can be stored in the rear floor storage compartment. Fitting Engage cover in side guides. Rear floor storage cover To access the rear floor storage compartment, lift the floor carpet using the central strap located near the tailgate latch and hang the string on the hook provided.
46 Storage First aid kit Stow the first aid kit in the space on the left hand side of the rear floor storage compartment. Roof rack system Roof rack For safety reasons and to avoid damage to the roof, the vehicle approved roof rack system is recommended.
Storage 47 ■ Do not allow the load to protrude above the upper edge of the backrests. ■ Do not place any objects on the load compartment cover or the instrument panel, and do not cover the sensor on top of the instrument panel.
48 Instruments and controls Instruments and controls Controls ....................................... 48 Warning lights, gauges and indicators ..................................... 52 Vehicle messages ........................ 60 Trip computer ........
Instruments and controls 49 Horn Press j . Windscreen wiper/washer Windscreen wiper MIST = misting function OFF = off INT = intermittent operation LO = slow HI = fast For a single swipe, move lever up from position OFF . Do not use if the windscreen is frozen.
50 Instruments and controls Rear window wiper/washer Turn: f = washer fluid is sprayed onto the rear window OFF = off INT = intermittent operation ON = continuous operation f = washer fluid is sprayed onto the rear window Outside temperature The outside temperature is shown in the odometer display when the ignition is switched on.
Instruments and controls 51 Press X to set hours. Release X for approx. 5 seconds to set hour display. Power outlets A 12 V power outlet is located in the centre console and is operational with ignition switch in positions ACC or ON . Do not exceed the maximum power consumption of 120 watts.
52 Instruments and controls Warning lights, gauges and indicators Speedometer Indicates vehicle speed. Odometer Displays the recorded distance. Odometer display brightness To change brightness level, switch on headlights and press the MODE button repeatedly until the squares that indicate the brightness level appear in the odometer display.
Instruments and controls 53 There are two independent trip odometers which indicate how far the vehicle has been driven since the last reset. Press the MODE button repeatedly until A or B appears on the left of the display. To reset a trip odometer, press and hold the MODE button for approx.
54 Instruments and controls After the service is complete, have the display reset. Seek the assistance of a workshop. Transmission display The mode or selected gear is shown in the transmission display.
Instruments and controls 55 Control indicators in the instrument cluster.
56 Instruments and controls Turn signal O flashes green. Flashes if a turn signal or the hazard warning flashers are activated. Rapid flashing: failure of a turn signal light or associated fuse. Bulb replacement 3 97. Fuses 3 101. Turn signals 3 64. Seat belt reminder X for driver seat illuminates or flashes red.
Instruments and controls 57 9 Danger Risk of fatal injury for a child using a child restraint system together with activated front passenger airbag. Risk of fatal injury for an adult person with deactivated front passenger airbag. Airbag system 3 33, belt tensioners 3 30.
58 Instruments and controls The vehicle can be steered but considerably more force is required. Contact a workshop. Electronic Stability Program b illuminates or flashes yellow. Illuminates There is a fault in the system. Continued driving is possible.
Instruments and controls 59 Illuminates when the engine is running Caution Engine lubrication may be interrupted. This may result in damage to the engine and/or locking of the drive wheels. 1. Move out of the flow of traffic as quickly as possible without impeding other vehicles.
60 Instruments and controls Fog light > illuminates green. Illuminated when the front fog lights are on 3 64. Rear fog light r illuminates yellow. Illuminated when the rear fog light is on 3 64. Door open h illuminates red. Illuminates when a door or the tailgate is open.
Instruments and controls 61 Trip computer The functions can be selected by pressing the MODE button repeatedly in the instrument cluster. Press the MODE button to select one of the functions: ■ Range ■ Average consumption ■ Instantaneous consumption Range Range is calculated from current fuel tank content and current consumption.
62 Lighting Lighting Exterior lighting ............................ 62 Interior lighting ............................. 65 Exterior lighting Light switch Turn light switch: 9 = Headlights 8 = Sidelights OFF = Off High beam control indicator P 3 59. High beam To switch from low to high beam, push lever.
Lighting 63 Headlight range adjustment Manual headlight range adjustment To adapt headlight range to the vehicle load to prevent dazzling: turn knurled wheel to required position.
64 Lighting Turn and lane-change signals lever up = right indicator lever down = left indicator If the lever is moved past the resistance point, the indicator is switched on constantly. When the steering wheel moves back, the indicator is automatically deactivated.
Lighting 65 Misted light covers The inside of the light covers may mist up briefly in poor, wet and cold weather conditions, in heavy rain or after washing.
66 Infotainment system Infotainment system Introduction .................................. 67 Radio ........................................... 70 Audio players .
Infotainment system 67 Introduction.
68 Infotainment system 1. f : CD eject 2. 6 : Sound settings 3. i : Mute/unmute 4. AST : Auto search 5. Display 6. CD slot 7. AF : Alternative Frequency 8. PTY : Program Type 9. TA : Traffic Announcement 10. 3, RDM : Radio preset station 3, CD/MP3 random playback 11.
Infotainment system 69 pressing the corresponding button repeatedly until the chosen user ID is complete. 5. Press and hold the PTY button for approx. 2 seconds to enter the chosen user ID. SEC appears again in the display and the unit switches off automatically.
70 Infotainment system Sound settings Press the 6 button to enter the sound settings menu. When this button is pressed repeatedly the settings appear in the following order: ■ BAS - Bass ■ TRE - Treble ■ BAL - Balance ■ FAD - Fader ■ AVC - Auto volume control To adjust the displayed sound setting, press button h or g .
Infotainment system 71 To exit automatic storing while storing is in progress, press the AST button again. Previously stored stations are not overwritten. Selecting stored stations Tune to the desired waveband and press the relevant preset station button.
72 Infotainment system NOTHING appears in the display followed by PTY. Select another PTY as described above. TA - Traffic Announcement Traffic stations are RDS stations which transmit traffic information. With TA on, the system searches for stations emitting TP - Traffic Programs and tunes into these stations in preference to others.
Infotainment system 73 Audio players CD player The CD player can play audio CDs and, if equipped, MP3 CDs. The CD type is automatically recognised. Caution Do not insert DVDs, small diameter single CDs and CDs with irregular shapes into the unit. They may become jammed or damage the mechanism.
74 Infotainment system Phone Mobile phones and CB radio equipment Installation instructions and operating guidelines The vehicle specific installation instructions and the operating guidelines of the mobile phone and handsfree manufacturer must be observed when installing and operating a mobile telephone.
Climate control 75 Climate control Climate control systems ............... 75 Air vents ....................................... 77 Maintenance ................................ 78 Climate control systems Heating and ventilation system Controls for: ■ Temperature ■ Air distribution ■ Fan speed Heated rear window Ü 3 26.
76 Climate control Air conditioning system Cooling n Operated with the n button and functional only when the engine and fan are running. The air conditioning system cools and dehumidifies (dries) when outside temperature is a little above the freezing point.
Climate control 77 Demisting and defrosting the windows V ■ Set air distribution control to V . ■ Set temperature control to warmest level. ■ Set fan speed to highest level. ■ Switch on heated rear window Ü . ■ Open side air vents as required and direct them towards the door windows.
78 Climate control Maintenance Air intake The air intake in front of the windscreen in the engine compartment must be kept clear to allow air intake. Remove any leaves, dirt or snow. Pollen filter The pollen filter cleans dust, soot, pollen and spores from the air entering the vehicle through the air intake.
Driving and operating 79 Driving and operating Driving hints ................................. 79 Starting and operating ................. 79 Engine exhaust ............................ 83 Automatic transmission ................ 84 Manual transmission .
80 Driving and operating Ignition switch positions LOCK = Ignition off ACC = Steering wheel lock released, ignition off ON = Ignition on START = Starting Starting the engine Manual transmission: operate clutch; Automatic transmission: operate brake and move selector lever in P or N ; Do not accelerate; Turn key to position START and release.
Driving and operating 81 Activation The stop-start system is available as soon as the engine is started, the vehicle starts off and the conditions as stated below in this section are fulfilled. Deactivation Deactivate the stop-start system manually by pressing the ENG A- STOP OFF button.
82 Driving and operating ■ the brake vacuum is sufficient ■ the vehicle has moved since last Autostop An Autostop may be less available as the ambient temperature approaches freezing point. Certain settings of the climate control system may inhibit an Autostop.
Driving and operating 83 ■ Always apply parking brake without pressing release button. Apply as firmly as possible on downhill or uphill slopes. Depress the foot brake at the same time to reduce operating force. ■ Switch off the engine and ignition.
84 Driving and operating Automatic transmission The automatic transmission permits automatic gearshifting. Transmission display The mode or selected gear is shown in the transmission display.
Driving and operating 85 Rocking the vehicle Rocking the vehicle is only permissible if the vehicle is stuck in sand, mud or snow. Move the selector lever between D and R in a repeat pattern. Do not race the engine and avoid sudden acceleration. Parking Apply the parking brake and engage P .
86 Driving and operating Manual transmission Reverse: with the vehicle stationary, wait 3 seconds after depressing the clutch before engaging gear. If the gear does not engage, set the lever in neutral, release the clutch pedal and depress again; then repeat gear selection.
Driving and operating 87 ABS starts to regulate brake pressure as soon as a wheel shows a tendency to lock. The vehicle remains steerable, even during hard braking. ABS control is made apparent through a pulse in the brake pedal and the noise of the regulation process.
88 Driving and operating Ride control systems Traction Control system Traction Control system (TC) is a component part of the Electronic Stability Program (ESP®) which improves driving stability when necessary, regardless of the type of road surface or tyre grip, by preventing the drive wheels from spinning.
Driving and operating 89 9 Warning Do not let this special safety feature tempt you into taking risks when driving. Adapt speed to the road conditions. Control indicator b 3 58. Fuel Fuel for petrol engines Only use unleaded fuel that complies with EN 228.
90 Driving and operating The fuel filler flap is opened by pulling up the release lever located on the outboard side of the driver's seat. To open fuel filler cap: turn it anticlockwise. Caution Wipe off any overflowing fuel immediately. Fuel filler cap Only a genuine fuel filler cap provides full functionality.
Vehicle care 91 Vehicle care General Information ..................... 91 Vehicle checks ............................. 92 Bulb replacement ......................... 97 Electrical system ........................ 101 Vehicle tools ......................
92 Vehicle care ■ Check the engine oil level. ■ Check the coolant level. ■ Fit the number plate if necessary. End-of-life vehicle recovery Information on end-of-life vehicle recovery centres and the recycling of end-of-life vehicles is available on our website.
Vehicle care 93 Locate the safety catch on the underside of the bonnet, push the catch to the left and lift the bonnet. Secure the bonnet support. Closing Before closing the bonnet, press the support into the holder. Lower the bonnet and allow it to drop into the catch.
94 Vehicle care Caution Do not allow the engine oil level to drop below the minimum level! We recommend the use of the same type of engine oil that was used at the last change. The engine oil level must not exceed the MAX mark on the dipstick. Caution Overfilled engine oil must be drained or suctioned out.
Vehicle care 95 concentration checked and have the cause of the coolant loss remedied by a workshop. Washer fluid Fill with clean water mixed with a suitable quantity of windscreen washer fluid which contains antifreeze. Brakes A squealing noise indicates that the brake lining is at its minimum thickness.
96 Vehicle care Battery The vehicle battery is maintenance- free provided that the driving profile allows sufficient charging of the battery. Short-distance-driving and frequent engine starts can discharge the battery. Avoid the use of unnecessary electrical consumers.
Vehicle care 97 Wiper blade replacement Wiper blades on the windscreen Lift wiper arm, press retaining clip towards wiper arm and detach wiper blade. Wiper blade on the rear window Lift wiper arm. Disengage wiper blade as shown in illustration and remove.
98 Vehicle care Halogen headlights Low beam and high beam 1. Remove headlight protective cover. 2. Detach plug connector from bulb. 3. Push retaining spring wire clip forward and unhook it. 4. Remove bulb from reflector housing and pull bulb straight out of socket.
Vehicle care 99 2. Push bulb into socket slightly, rotate anti-clockwise, remove and renew bulb. 3. Insert bulb holder in reflector, rotate clockwise to engage. Tail lights 1. Open tailgate. 2. Remove both screws on rear light assembly. 3. Pull light assembly away from vehicle, towards the rear.
100 Vehicle care 2. Close tailgate. 3. Remove light assembly from tailgate. 4. Pinch both prongs on bulb holder together simultaneously and remove bulb holder from light assembly. 5. Remove bulbs by pulling them straight out. 6. Insert new bulbs by pushing them in.
Vehicle care 101 3. Insert new bulb, ensuring contact springs hold the bulb securely. 4. Install lens in headlining by pushing it back into original position. Load compartment light 1. Prise the light out with a screwdriver. 2. Press bulb slightly towards spring clip and remove.
102 Vehicle care A blown fuse can be recognised by its melted wire. Do not replace the fuse until the cause of the fault has been remedied. Spare fuses can be kept in the engine compartment fuse box. Some functions are protected by several fuses. Fuses may also be inserted without existence of a function.
Vehicle care 103 Engine compartment fuse box The fuse box is located next to the battery in the engine compartment. Disengage the cover and tilt upwards to open.
104 Vehicle care Instrument panel fuse box Located on the driver's side of the vehicle, below the instrument panel. To open the fuse box, push the cover at both ends and remove. Do not store any objects behind the cover. Some circuits may be protected by several fuses.
Vehicle care 105 No. Circuit 25 Accessory, LHD Stop-start system 26 Infotainment system, LHD Stop- start system 27 Accessory, RHD Stop-start system 28 Infotainment system, RHD Stop-start system Vehicl.
106 Vehicle care Wheels and tyres Tyre condition, wheel condition Drive over edges slowly and at right angles if possible. Driving over sharp edges can cause tyre and wheel damage. Do not trap tyres on the kerb when parking. Regularly check the wheels for damage.
Vehicle care 107 Incorrect tyre pressures will impair safety, vehicle handling, comfort and fuel economy and will increase tyre wear. 9 Warning If the pressure is too low, this can result in considerable tyre warm- up and internal damage, leading to tread separation and even to tyre blow-out at high speeds.
108 Vehicle care 9 Warning Use of unsuitable tyres or wheel covers could lead to sudden pressure loss and thereby accidents. Tyre chains Tyre chains are only permitted on the front wheels. Always use fine mesh chains that add no more than 10 mm to the tyre tread and the inboard sides (including chain lock).
Vehicle care 109 The tyre repair kit is stowed beneath the floor carpet in the load compartment. 1. Screw the compressor air hose to the connection on the sealant bottle. 2. Fit the sealant bottle in the retainer on the compressor. Set the compressor near the tyre in such a way that the sealant bottle is upright.
110 Vehicle care 10 minutes. Tyre pressure 3 129. When the correct pressure is obtained, switch off the compressor. If the prescribed tyre pressure is not obtained within 10 minutes, remove the tyre repair kit. Move the vehicle one tyre rotation. Reattach the tyre repair kit and continue the filling procedure for 10 minutes.
Vehicle care 111 Make the following preparations and observe the following information: ■ Park the vehicle on a level, firm and non-slippery surface. The front wheels must be in the straight- ahead position. ■ Apply the parking brake and engage first gear, reverse gear or P .
112 Vehicle care Position jack at the front or rear jacking point located nearest to the wheel concerned so that the jack claw spans the vertical base. Make sure it is properly positioned, ensuring the jacking bar fits securely into the jack head groove.
Vehicle care 113 Use of a spare wheel that is smaller than the other wheels or together with winter tyres could affect driveability. Have the defective tyre replaced as soon as possible.
114 Vehicle care Jump starting Do not start with quick charger. A vehicle with a discharged battery can be started using jump leads and the battery of another vehicle.
Vehicle care 115 3. Connect the black lead to the negative terminal of the booster battery. 4. Connect the other end of the black lead to a vehicle grounding point, such as the engine block or an engine mounting bolt. Connect as far away from the discharged battery as possible, however at least 60 cm.
116 Vehicle care The towing eye is stowed with the vehicle tools 3 105. Screw in the towing eye as far as it will go until it stops in a horizontal position. Attach a tow rope – or better still a tow rod – to the towing eye. The towing eye must only be used for towing and not recovering the vehicle.
Vehicle care 117 Appearance care Exterior care Locks The locks are lubricated at the factory using a high quality lock cylinder grease. Use de-icing agent only when absolutely necessary, as this has a degreasing effect and impairs lock function. After using de-icing agent, have the locks regreased by a workshop.
118 Vehicle care Windows and windscreen wiper blades Use a soft lint-free cloth or chamois leather together with window cleaner and insect remover. When cleaning the rear window, make sure the heating element inside the window is not damaged. For mechanical removal of ice, use a sharp-edged ice scraper.
Vehicle care 119 Caution Close Velcro fasteners as open Velcro fasteners on clothing could damage seat upholstery. The same applies to clothing with sharp-edged objects, like zips or belts or studded jeans. Plastic and rubber parts Plastic and rubber parts can be cleaned with the same cleaner as used to clean the body.
120 Service and maintenance Service and maintenance General information ................... 120 Recommended fluids, lubricants and parts ..............
Service and maintenance 121 Recommended fluids, lubricants and parts Recommended fluids and lubricants Only use products that meet the recommended specifications. Damage resulting from the use of products not in line with these specifiations will not be covered by the warranty.
122 Service and maintenance protection down to approx. -28 °C. This concentration should be maintained all year round. The use of additional coolant additives that intend to give additional corrosion protection or seal against minor leaks can cause function problems.
Technical data 123 Technical data Vehicle identification .................. 123 Vehicle data ............................... 125 Vehicle identification Vehicle Identification Number The Vehicle Identification Number (VIN) is visible through the windscreen.
124 Technical data Information on identification plate: 1 = Manufacturer 2 = Vehicle Identification Number 3 = Permissible gross vehicle weight rating 4 = Permissible gross train weight 5 = Maximum pe.
Technical data 125 Vehicle data Recommended fluids and lubricants Required engine oil quality Engine oil quality Petrol engines dexos 2 ✔ In case dexos quality is unavailable you may use the oil qua.
126 Technical data Engine oil viscosity grades Ambient temperature Petrol engines down to -25 °C SAE 5W-30 or SAE 5W-40 below -25 °C SAE 0W-30 or SAE 0W-40 Engine data Sales designation 1.
Technical data 127 Sales designation 1.0 1.2 Engine identifier code K 10 B K 12 B possible 91 91 Oil consumption [l/1000 km] 1.0 1.0 Performance Engine K 10 B K 12 B Maximum speed 1) [mph] Manual transmission 99 109 Automatic transmission – 106 1) The maximum speed indicated is achievable at kerb weight (without driver) plus 200 kg payload.
128 Technical data Vehicle weight Kerb weight, basic model Agila Engine Manual transmission Automatic transmission without/with optional equipment [kg] K 10 B 975/1030 – K 12 B 990/1045/1050 2) 990/.
Technical data 129 Capacities Engine K 10 B K 12 B Engine oil including filter [l] 2.9 3.1 between MIN and MAX [l] 1.0 1.0 Fuel tank, nominal capacity [l] 45 45 Tyre pressures Comfort with up to 3 peo.
130 Customer information Customer information Vehicle data recording and privacy ....................................... 130 Vehicle data recording and privacy Event data recorders The vehicle has a number of sophisticated systems that monitor and control several vehicle data.
Customer information 131 In addition, the manufacturer may use the collected or received diagnostic data: ■ for the manufacturer's research needs ■ to make it available for research needs whe.
132 Index A Accessories and vehicle modifications ............................ 91 Adjustable air vents ..................... 77 Airbag and belt tensioners ........... 56 Airbag deactivation ................ 34, 56 Airbag system .......................
133 D Danger, Warnings and Cautions ... 3 Daytime running lights ................. 63 Door open .................................... 60 E Electric adjustment ...................... 24 Electronic driving programmes .... 85 Electronic Stability Program .
134 Load compartment ................ 22, 43 Load compartment cover ............. 44 Load compartment lighting ........... 65 Loading information ..................... 46 Low fuel ....................................... 59 M Malfunction indicator light .
135 Top-tether fastening eyes ............ 40 Towing another vehicle ............. 116 Towing eye ................................. 115 Towing the vehicle ..................... 115 Traction Control system ............... 88 Traction Control system off.
136.
Ein wichtiger Punkt beim Kauf des Geräts Vauxhall Agila (2012) (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Vauxhall Agila (2012) noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Vauxhall Agila (2012) - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Vauxhall Agila (2012) reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Vauxhall Agila (2012) erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Vauxhall Agila (2012) besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Vauxhall Agila (2012) verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Vauxhall Agila (2012). Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Vauxhall Agila (2012) gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
