Benutzeranleitung / Produktwartung F 772 GRI des Produzenten Beko
Zur Seite of 24
1 List of contents Special featur es Safety instructions Getting started Aerial connection Switching on Battery fitting Contr ol unit Front and rear panel External connections table Remote control Usi.
T elevision Thank you for buying this television which is designed to give you many years of satisfactory service. Y ou may already be familiar with using a television but do please take time to read these instructions.
3 Safety is Important Y our safety and the safety of others is important. Please, therefore, ensure you r ead the Safety instructions before you operate this television. Safety instructions Read all the safety instructions before first use of your TV .
Getting started Remove your T elevision carefully from the bo x. Y ou may wish to Y ou can use an outdoor or indoor aerial. Ho wever , if you use an indoor aerial the quality of the reception may be reduced and adjustment of the aerial may be required when changing programs.
Contr ol Unit Front Panel Program Down/Up button V olume Down/Up button. General Program ON/OFF switch Stand by (Depends on model) Stand by indicator External Connections: (Front or side) Right audio .
6 External connections table STD OPT : Standart : Optional Please note: The Audio/V ideo RCA, S-V ideo and Headphone socket can be placed on the front panel or on the right-hand side of the cabinet depending to the model of your TV .
1 -/-- 1 2 OK OK TV/TX AV screen. Using the TV Mute T o mute the sound press the Mute button on the remote control. A loudspeaker symbol will appear on the screen. PP Swap 2 Scart models: 1 A V1 when using SCAR T socket 1. 2 A V2 when using SCAR T socket 2.
8 In the Setup menu select PROG NO and change to P1 using the Program down button to select it and the V olume up button to change it. Starting with Program 1, tune in the first channel as follows: Use the Pr ogram down button to select SEARCH. P ress the V olume up or V olume down button to start the tuning search.
9 T uning with channel numbers Enter the SETUP menu by pressing the blue button. Press the OK button to enter the CHANNEL row . Use the OK button to select S for cable channels and C for terrestrial broadcast. Use V olume up button to select the channel number buttons.
10 Pr ogram T able Once you have tuned in all the channels you want, you can change their programme number , if required, and name them. select PROGRAM T ABLE and press the OK button or pr ess directly the Y ellow button. PROGRAM 01 will be selected and the channel stored under PROGRAM 01 will be showing on the screen.
11 V olume Sets default volume using the V olume up and down buttons. T o save your settings, select ST ORE and press the OK button. will be displayed. Press the Menu button to go back to the previous menu. Balance Sets the sound balance when the TV is in stereo mode using the T o save your settings, select ST ORE and press the OK button.
12 Sound mode Y ou can select NORMAL, SP A TIAL or DOLBY VIR TUAL (optional)using the V olume up/down buttons or mix button. SP A TIAL sound is an expanded stereo . I t gives the impression that the two speakers in the TV are further apart than they really are.
13 In this menu are a series of preset equalizer settings for different types of sound output. There are five music settings - MUSIC, SPOR TS, CINEMA, SPEECH and USER mode. USER allows you to set your own sound output as follows: Use the Program down button to select USER.
14 Select BRIGHTNESS, CONTRAST , COLOUR and SHARPNESS using the Program up/down buttons. Change the settings with the V olume up/down buttons. T o save your settings, select ST ORE and press the OK button. STORED will be displayed. Press the Menu button to go back to the previous menu.
15 Picture format This allows you to select the picture size on corresponding to the scren type widescreen of your TV : A vaible formats for widesereen TV sets are 16:9, 4:3, zoom, Letterbox and Subtitle. A vaible formats of 4:3 TV sets are 4:3 and 16:9.
16 T eletext is an information system that displays text on your TV screen. U sing the teletext control buttons you can view pages of information that are listed in the teletext index. No on screen display is available in text mode. The contrast, brightness and colour cannot be changed but the volume control is still available.
17 Page hold If the page of text you have selected contains sub pages, these sub pages will automatically be displayed in order with a delay to allow you to read the page. T o stop the move to the next sub page press the Hold button. STOP will appear in the top left hand corner .
18 Connecting e xternal equipment Headphones (optional) The headphones must have an impedance of between 8 and 32 ohms and have a 3.5 mm stereo jack plug.
19 If you have an S-V ideo player you can connect it to SCAR T socket 2 via an adaptor from scart to S-V ideo/RCA audio (not supplied). S-V ideo Player Plug a coaxial plug into the RF out socket on the rear of the video recorder and plug the other end into the aerial socket of the TV .
20 Connecting a DVD player V ia SCART Make sure the TV and DVD player ar e both switched off. Plug one end of the SCAR T lead (not supplied) into the back of the DVD player and the other end into one of the SCAR T sockets on the back of the TV . S witch on the DVD and the TV .
21 Connecting a decoder V ia SCART Make sur e the TV and decoder are both switched off. Plug one end of the SCAR T lead (not supplied) into the back of the decoder and the other end into the SCAR T1 on the back of the TV . S witch on the decoder and the TV .
22 Connecting TV with camcorder Connecting TV games and computer R L VIDEO S-Video In S-Video camcorder Camcorder A V1/A V2/A V3 AV 3 (3 scart models only) R L VIDEO AV 1 S-Video In S-Video TV Game Pl.
23 Help and service tips The TV does not work Make sure it is plugged into the mains supply and switched on. No sound ¥ Is the sound muted? Press the Mute button.
24 SF PF 16:9 4:3 Please note: : Superflat picture tube : Pureflat picture tube : W idescreen TV : Conventional TV Using a subwoofer causes 20 W extra power consumption and supplies maximum 20 W extra sound output. General technical specifications Power Supply A C: .
Ein wichtiger Punkt beim Kauf des Geräts Beko F 772 GRI (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Beko F 772 GRI noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Beko F 772 GRI - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Beko F 772 GRI reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Beko F 772 GRI erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Beko F 772 GRI besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Beko F 772 GRI verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Beko F 772 GRI. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Beko F 772 GRI gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
