Benutzeranleitung / Produktwartung NX5820 des Produzenten Unisys
Zur Seite of 176
o New Release • Revision o Update o New Mail Code Title ClearPath HMP Enterprise Servers NX5820 and NX5820 K Hardware Configuration Guide (7017 6300–005) This guide is intended to assist individuals responsible for defining and configuring a Unisys ClearPath HMP Enterprise Servers NX5820 and NX5820 K product with future expansion in mind.
white text to force blank page on duplex printerthese characters as “white” to force printing of blank page..
ClearPath HMP Enterprise Servers NX5820 and NX5820 K Hardware Configuration Guide Printed in USA June 2000 7017 6300–005.
Format these characters as “white” to force printing of blank page..
ClearPath HMP Enterprise Servers NX5820 and NX5820 K Hardware Configuration Guide Unisys û 2000 Unisys Corporation. All rights reserved. Printed in USA June 2000 7017 6300 – 005.
NO WARRANTIES OF ANY NATURE ARE EXTENDED BY THIS DOCUMENT. Any product or related information described herein is only furnished pursuant and subject to the terms and conditions of a duly executed agreement to purchase or lease equipment or to license software.
ClearPath HMP Enterprise Servers NX5820 and NX5820 K Hardware Configuration Guide ClearPath HMP Enterprise Servers NX5820 and NX5820 K Hardware Configuration Guide 7017 6300 – 005 7017 6300 – 005 Bend here, peel upwards and apply to spine.
Format these characters as “white” to force printing of blank page..
7017 6300 – 005 iii Contents About This Guide ....................................................................................... xi Section 1. Introduction How to Use This Guide ........................................................... 1 – 1 What Product Models Are Covered .
Contents iv 7017 6300 – 005 ClearPath Enterprise Server NX5822 Dual-Domain, Multi-Processor (DDMP) Configurations Models 32 through 78 .......................................................... 2 – 6 NX5820 Companion Package Style ................
Contents 7017 6300 – 005 v Section 5. Configuring the Input/Output Module Introduction ........................................................................... 5 – 1 How This Section Is Organized .............................................. 5 – 1 How the IOM Is Organized .
Contents vi 7017 6300 – 005 Configuration Guidelines ES5085R ............................ 6 – 25 ES2024R Servers .................................................................. 6 – 26 Basic Features ...........................................
7017 6300 – 005 vii Figures 1 – 1. Typical View of ClearPath Enterprise Server NX5820 and NX5820 K with VX1505 (7U) Servers ........................................................................ 1 – 8 1 – 2. System Cabinet PCA Locations for NX5820 .
Figures viii 7017 6300 – 005 5 – 8. Dual Domain Typical PCITHRU Card Location in the Internal and External Channel Racks .................................................................................. 5 – 15 5 – 9. PCITHRU Slot Versus PCI Bridge Jumper Positions .
7017 6300 – 005 ix Tables 1 – 1. ClearPath Enterprise Server NX Product Models Covered in This Guide ..... 1 – 2 1 – 2. Acronyms for System Components ........................................................ 1 – 7 2 – 1. ClearPath Enterprise Server NX5820 Product Models .
Tables x 7017 6300 – 005 4 – 5. Configuring Power Net in Channel Racks ................................................. 4 – 6 5 – 1. CMF External Connectivity Options .......................................................... 5 – 6 5 – 2.
7017 6300 – 005 xi About This Guide Purpose This guide provides: • Guidelines and recommendations to assist the individuals responsible for defining and configuring a Unisys ClearPath Enterprise S.
About This Guide xii 7017 6300 – 005 How to Use This Guide • Read the entire guide to familiarize yourself with the basic concepts it presents • Use it as a reference for configuring system components and system options • Use it to facilitate the ordering of system components Organization This guide consists of the following sections.
About This Guide 7017 6300 – 005 xiii Section 5. Configuring the Input/Output Module • Describes how the I/O module (CIOM) is organized • Describes IOM options • Describes how to configure cha.
About This Guide xiv 7017 6300 – 005 ClearPath Enterprise Server NX5600, NX5800, NX5820, and NX5820 K Site Planning Checklist (7016 7028) Provides checklists and procedures required to prepare the site for system installation.
7017 6300 – 005 1 – 1 Section 1 Introduction How to Use This Guide This guide provides the guidelines, procedures, and examples necessary to configure a ClearPath Enterprise Server NX5820 and NX5820 K products.
What Product Models Are Covered 1 – 2 7017 6300 – 005 What Product Models Are Covered Table 1–1 lists the ClearPath Enterprise Server NX product models covered in this guide.
System Partitioning 7017 6300 – 005 1 – 3 System Partitioning Single Domain • Cannot be partitioned. • A single-domain system contains: − Its own power, cooling, and maintenance interface − Its own master clock Dual Domain Single Monolithic Partition • The combined domains function as a monolithic system.
Hardware Overview 1 – 4 7017 6300 – 005 Hardware Overview Type of Computing System The ClearPath NX5820 and NX5820 K Server is a general-purpose, medium-to-high- performance system running under Level Delta compatible MCP.
Hardware Overview 7017 6300 – 005 1 – 5 Expansion Sections The expansion sections house the following units: − Server A − Optional servers (up to five maximum per domain) − Up to two Mainten.
System Cabinet Organization 1 – 6 7017 6300 – 005 Other I/O Devices The I/O subsystem accommodates any other device that connects via a CS-bus interface and is qualified for use on the system, suc.
System Components 7017 6300 – 005 1 – 7 Table 1 – 2. Acronyms for System Components Acronym Component Name NX582x-rp Enterprise Server models: (x = 1, single-domain; x = 2, dual- domain; r = per.
System Components 1 – 8 7017 6300 – 005 0670 Central Equipment Section Win dows N T Serve r A Win dows N T Serve r D Win dows N T Serve r B Win dows N T Serve r C * The servers shown are typical of the servers that can be conf igured. * * * * Figure 1 – 1.
System Components 7017 6300 – 005 1 – 9 Fr o n t V i ew 0 5 10 15 20 25 30 35 0037 Rear Vi ew Impeller Impe ller Dom ain 0 Dom ain 1 Impeller Impe ller Dom ain 1 Dom ain 0 AC Inlet AC Inlet B u l .
System Components 1 – 10 7017 6300 – 005 F ront V ie w 0037A Rear V i ew Impelle r Impelle r Domain 0 Domain 1 Impelle r Impelle r Domain 1 Doma in 0 AC Inl et AC Inlet B u l k B u l k D C / D C D.
System Components 7017 6300 – 005 1 – 11 MAINTLA N FEEDTH RU Dire ct CS Bus MCP E nv ironme nt Doma in 0 NT A PCI Bridge 10 BaseT CS B us SCP A 10 BaseT CSE Mai n t en an c e L A N Hu b ST Switch .
System Components 1 – 12 7017 6300 – 005 0703 MAINTLAN FEEDTH RU Direct CS Bus MCP E nvironme nt Domain 0 NT A PCI Bridg e 10 Bas eT CS Bus SCP A 10 Bas eT CSE Main t en an c e L A N Hu b ST Switc.
7017 6300 – 005 2 – 1 Section 2 Configuring System Hardware How This Section Is Organized This section contains the following information for the ClearPath HMP Enterprise Servers NX5820 and NX5820.
NX5820 Products 2 – 2 7017 6300 – 005 • One to two memory storage units with 192 MB or 384 MB storage per domain depending on model • Single server containing its own processing modules, memory, and peripheral subsystem, with a dual-server per domain option Notes: 1.
NX5820 Product Configurations 7017 6300 – 005 2 – 3 NX5820 Product Configurations This subsection describes the NX5820 product configurations. ClearPath Enterprise Server NX5821 Single-Domain, Single- Processor (SDSP) Configurations Models 31 through 71 • Table 2 – 2 lists component styles for these models.
NX5820 Product Configurations 2 – 4 7017 6300 – 005 Table 2 – 2. ClearPath Enterprise Server NX5821 Single-Domain, Single-Processor Configurations, Models 31 through 71 Component Description NX5.
NX5820 Product Configurations 7017 6300 – 005 2 – 5 0704 0 5 10 15 20 25 30 35 CEC OSS7 000 Periphera l Rack Ser v er Ex p an s i o n Sec t i o n C e nt ra l E q uipme nt Sec t i o n APC2 Console .
NX5820 Product Configurations 2 – 6 7017 6300 – 005 0705 0 5 10 15 20 25 30 35 APC2 C e ntra l E quipme nt Sect io n S e r ve r E xpa nsion Sect io n Console (Primary) CEC OSS7000 Peripheral Rack .
NX5820 Product Configurations 7017 6300 – 005 2 – 7 Table 2 – 3. ClearPath Enterprise Server NX5822 Dual-Domain, Multi-Processor Models 32 through 72 Component Description NX5822 Models Style 32.
NX5820 Product Configurations 2 – 8 7017 6300 – 005 Table 2 – 3. ClearPath Enterprise Server NX5822 Dual-Domain, Multi-Processor Models 32 through 72 Component Description NX5822 Models Style 32.
NX5820 Product Configurations 7017 6300 – 005 2 – 9 Table 2 – 4. ClearPath Enterprise Server NX5822 Dual-Domain, Multi-Processors Models 73 through 78 Component Description NX5822 Models Style 7.
NX5820 Product Configurations 2 – 10 7017 6300 – 005 0706 0 5 10 15 20 25 30 35 APC2 C e nt ra l E quipme nt Sect io n S e r ve r E xpa nsion Sect io n Cons ole (Pri mary ) Cons ole (Redu ndant) O.
NX5820 Product Configurations 7017 6300 – 005 2 – 11 NX5820 Companion Package Style Table 2 – 5 summarizes the companion package styles required for the various NX5820 models. As noted in the component style charts, these package styles must be ordered separately from the system package style.
NX5820 K Products 2 – 12 7017 6300 – 005 NX5820 K Products Table 2 – 6 lists the basic hardware components associated with each NX5820 K product model.
NX5820 K Products 7017 6300 – 005 2 – 13 Dual-Domain, Multiple-Processor (DDMP) NX5822 – BAS Models • Requires one of the following styles NX5822-2D3 to NX5822-2DA • Minimum system performan.
NX5820 K Products 2 – 14 7017 6300 – 005 Table 2 – 6. ClearPath Enterprise Server NX5820 K Product Models Model (Performance Level) Processor Modules Memory Storage Units 1 CIOM Modules 2 Std/Max Servers 3 Std/Max System (SCP) Console Std/Max SCSI-2W Channels 4 802.
NX5820 K Product Configurations 7017 6300 – 005 2 – 15 Table 2 – 6. ClearPath Enterprise Server NX5820 K Product Models Model (Performance Level) Processor Modules Memory Storage Units 1 CIOM Modules 2 Std/Max Servers 3 Std/Max System (SCP) Console Std/Max SCSI-2W Channels 4 802.
NX5820 K Product Configurations 2 – 16 7017 6300 – 005 Table 2 – 7. ClearPath Enterprise Server NX5821 – BAS Single-Domain, Single-Processor Configurations Package Style NX5821 – BAS Component Style Description Qty.
NX5820 K Product Configurations 7017 6300 – 005 2 – 17 Table 2 – 7. ClearPath Enterprise Server NX5821 – BAS Single-Domain, Single-Processor Configurations Package Style NX5821 – BAS Component Style Description Qty. PCK104-SKB KEYBOARD 1 PCK1-EXT CABLE, M TO F PS2 2 PCT1200-INT 1.
NX5820 K Product Configurations 2 – 18 7017 6300 – 005 0704 0 5 10 15 20 25 30 35 CEC OSS7 000 Periphera l Rack Ser v er Ex p an s i o n Sec t i o n C e nt ra l E q uipme nt Sec t i o n APC2 Conso.
NX5820 K Product Configurations 7017 6300 – 005 2 – 19 0705 0 5 10 15 20 25 30 35 APC2 C e ntra l E quipme nt Sect io n S e r ve r E xpa nsion Sect io n Console (Primary) CEC OSS7000 Peripheral Ra.
NX5820 K Product Configurations 2 – 20 7017 6300 – 005 Table 2 – 8. ClearPath Enterprise Server NX5822 – BAS Dual-Domain Configurations Package Style NX5822 – BAS Component Style Description.
NX5820 K Product Configurations 7017 6300 – 005 2 – 21 Table 2 – 8. ClearPath Enterprise Server NX5822 – BAS Dual-Domain Configurations Package Style NX5822 – BAS Component Style Description.
NX5820 K Product Configurations 2 – 22 7017 6300 – 005 0706 0 5 10 15 20 25 30 35 APC2 C e nt ra l E quipme nt Sect io n S e r ve r E xpa nsion Sect io n Cons ole (Pri mary ) Cons ole (Redu ndant).
NX5820 K Product Configurations 7017 6300 – 005 2 – 23 NX5820 K Processor Package Style Table 2 – 9 summarizes the processor with various performance levels package styles required for the various NX5820 K models. As noted in the component style charts, these package styles must be ordered separately from the system package style.
NX5820 K Product Configurations 2 – 24 7017 6300 – 005 Table 2 – 9. NX5820 K Processor Package Styles Component Style Description Package Style NX5821 – 1Dx Model Package Style NX5822 – 2Dx .
Cables 7017 6300 – 005 2 – 25 Cables Refer to the I/O Configuration Guide for a comprehensive list of cable options available with ClearPath Enterprise Server NX5820 and NX5820 K products.
NX5820 System Upgrades 2 – 26 7017 6300 – 005 NX5820 System Upgrades Table 2 – 10 lists the NX5820 System upgrades options. Figure 2 – 10 shows the upgrade paths for the NX5820 product models listed in Table 2 – 10. Table 2 – 11 through Table 2 – 13 list the components included within the upgrade package styles.
NX5820 System Upgrades 7017 6300 – 005 2 – 27 NX5821-31 System Package Style Up grade Pack ag e Styl e 0305A NX582131-232 NX5822-32 NX582131-141 NX582141-242 NX582151-252 NX582161-262 NX582171-272.
NX5820 System Upgrades 2 – 28 7017 6300 – 005 Table 2 – 11. NX5820 Single Domain, Single Processor Model Upgrades (SDSP to SDSP) Package Converts Component Component Style From To Style Style De.
NX5820 K System Upgrades 7017 6300 – 005 2 – 29 Table 2 – 13. NX5820 Dual Domain Multi Processor Upgrades (DDMP to DDMP) Package Converts Component Component Style From To Style Style Description NX582232-242 NX5822-32 NX5822-42 NX582242-UDE FUNCTIONAL S/W, IP EMULATION NX5822-42 NX58412-PRM PROM, NX5820-41/42 (Min.
NX5820 K System Upgrades 2 – 30 7017 6300 – 005 0823 NX5822-P L7 NXU58226-PL7 NX5821-P L7 NX5822-P L6 NXU58216-PL7 NXU58225-PL6 NX5821-P L6 NX5822-P L5 NXU58215-PL6 NXU58224-PL5 NX5821-P L5 NX5822.
NX5820 K System Upgrades 7017 6300 – 005 2 – 31 Table 2 – 14. NX5820 K Upgrade Options Summary Upgrade Type Converts Package Style From To Performance Upgrades for Single-Domain, Single- Process.
NX5820 K System Upgrades 2 – 32 7017 6300 – 005 Table 2 – 16. NX5820 K Single-Domain, Single-Processor to Dual Domain, Dual- Processor Upgrade (SDSP to DDDP) Component Style Description Qty.
NX5820 K System Upgrades 7017 6300 – 005 2 – 33 Table 2 – 17. NX5820 K Performance Upgrades for Dual Domain, Dual-Processor Systems Package Component Component Qty.
NX5820 K System Upgrades 2 – 34 7017 6300 – 005 Table 2 – 19. NX5820 K Dual Domain, Dual-Processor Multi-Processor Upgrades (DDMP) Component Style Description Qty.
7017 6300 – 005 3 – 1 Section 3 Configuring System Options How This Section Is Organized This section discusses how system options are configured. It covers: • Memory for the NX5820 and NX5820 K.
NX5820 and NX5820 K Memory 3 – 2 7017 6300 – 005 Table 3 – 1. Basic Memory Board Configuration By System Style System Style Memory Style Basic Quantity Maximum Quantity NX5820 SYSTEMS NX5821-31 .
NX5820 and NX5820 K Memory 7017 6300 – 005 3 – 3 Table 3 – 2. NX5820 and NX5820 K Memory Styles and Upgrade Components (cont.) Style Description MSK208 Style Memory MSK208-384 Provides a basic eight requestor MSK memory board with two chip sets (four DRAMs) for a memory capacity of 384 megabytes of storage.
MSA104 Style Memory 3 – 4 7017 6300 – 005 MSA104 Style Memory The minimum memory capacity per domain utilizing the MSA style memory board is 192 megabytes.
MSK208 Style Memory 7017 6300 – 005 3 – 5 MSK208 Style Memory The minimum memory capacity per domain utilizing the MSK208 memory board is 384 megabytes.
MSK208 Style Memory 3 – 6 7017 6300 – 005 DIMM 13 Connec tor DIMM 10 DIMM 11 DIMM 12 Quads Bank 0 Seg 0 S eg 1 16Mx64 1/4 Quad 16Mx64 1/4Quad 16Mx64 1/4 Quad Bank 1 Seg 0 S eg 1 16Mx64 1/4 Quad 16.
MSK412 Style Memory 7017 6300 – 005 3 – 7 MSK412 Style Memory The minimum memory capacity per domain utilizing the MSK412 memory board is 384 megabytes.
MSK412 Style Memory 3 – 8 7017 6300 – 005 DIMM 13 MSUP1 DIMM 10 DIMM 11 DIMM 12 Memo ry Incr 64 Meg W ord Quads Bank 0 Seg 0 Seg 1 16Mx64 1/4 Quad 16Mx64 1/4Quad Bank 1 Seg 0 Seg 1 16Mx64 1/4 Quad.
Memory Slot Locations 7017 6300 – 005 3 – 9 Memory Slot Locations A maximum of three MSA, MSK208 or MSK412 memory cards per domain can be configured. The maximum system capacity is 9216 megabytes using MSK412 memory cards. The memory card slot locations are listed in Table 3 – 3.
IOM Channel Expansion 3 – 10 7017 6300 – 005 IOM Channel Expansion See Section 5 for details on IOM options and guidelines for configuring these options.
Configuring Redundant Switching Hubs 7017 6300 – 005 3 – 11 Configuring Redundant Switching Hubs Redundant switching hubs enhance system redundancy and resiliency by providing a backup capability to the primary public switching hub.
Configuring Additional Displays 3 – 12 7017 6300 – 005 Configuring Operator Display Workstations ODWs are a client responsibility. The following minimum requirements apply: • 120 Mhz Pentium processor that: − Is capable of running Windows NT workstation at 3.
Configuring Additional Displays 7017 6300 – 005 3 – 13 Table 3 – 5. Guidelines for Configuring SCP Monitors and ODW Displays Configuration Guideline Single-Domain/Non- Redundant Dual Domain One monitor with keyboard and mouse is supplied with the system.
Work Space 3 – 14 7017 6300 – 005 Work Space An optional console table is available for operator work space and/or placement of the monitor/keyboard/mouse shared by the SCP, the server, and the ST selector.
Converting From NX5820 to NX5820 K Systems 7017 6300 – 005 3 – 15 Table 3 – 6. Conversion Package Styles for NX5820 to NX5820 K Systems Conversion Package Style Converts Consists of Component Style Qty.
Converting From NX5820 to NX5820 K Systems 3 – 16 7017 6300 – 005 Table 3 – 6. Conversion Package Styles for NX5820 to NX5820 K Systems Conversion Package Style Converts Consists of Component Style Qty.
7017 6300 – 005 4 – 1 Section 4 Configuring I/O Cabinets and Channel Racks How to Use This Section This section provides guidelines for configuring universal cabinet (UC) style rack-mount (RM) cabinets: • • • • "Configuring I/O Cabinets" describes cabinet components and provides guidelines for configuring the cabinets.
Configuring I/O Cabinets 4 – 2 7017 6300 – 005 Table 4 – 1. Cabinet Styles Status Style Description Orderable BRM36-O First or only open-front style cabinet in a row. 36U high. BRM36-O2 Second and additional open-front style cabinets in a row. 36U high.
Configuring Channel Racks 7017 6300 – 005 4 – 3 Configuring Channel Racks Channel racks expand IOM connectivity beyond the channel slots provided in the system cabinet.
Configuring Channel Racks 4 – 4 7017 6300 – 005 Table 4 – 3. Channel Rack Components Style Description RM5-CA4 and RM5-CA5 • These are modular channel racks used with RM-style open-front I/O cabinets to house external channel cards. • RM5-CA4 is with fascia, for BRM36-0 and BRM36-02 cabinets.
Configuring Channel Racks 7017 6300 – 005 4 – 5 Table 4 – 4. Guidelines for Configuring Channel Racks Area Rule/Recommendation 3U configurations Consists of four bays with four 3U channel slots .
Configuring Channel Racks 4 – 6 7017 6300 – 005 Table 4 – 5. Configuring Power Net in Channel Racks Area Recommendation Configuration For NX5820 systems, if the channel racks are daisy chained to one another and the CEC section, use 9 Pin D to 9 Pin D Power Net cables (Style CBL8820-xxx, cable assembly 3446 6110-xxx).
7017 6300 – 005 5 – 1 Section 5 Configuring the Input/Output Module Introduction This section explains how to configure the I/O module (IOM) and its components.
How the IOM Is Organized 5 – 2 7017 6300 – 005 How the IOM Is Organized The IOM manages the I/O channels connected via the channel service (CS) busses and transfers data and control information to and from main storage via the memory interface. Each domain contains an IOM system.
How the IOM Is Organized 7017 6300 – 005 5 – 3 0710A MSM KIUB CIOM IOM 4 CSBs * * 2 of 4 busses can drive Internal and External Channels. Do m ain 0 Do m ai n 1 CIOM CIOM 4 CSBs 4 CSBs MSM CIOM 4 .
How the IOM Is Organized 5 – 4 7017 6300 – 005 First CIOM Per Domain CMF# Used for channels Channel Loads CMF0 External CMF0 and CMF4 are combined for 16 loads CMF4 Internal CMF1 External CMF1 and.
How the IOM Is Organized 7017 6300 – 005 5 – 5 0700A F ront V ie w Rear Vi ew Domai n 0 Dom ain 1 Cooling Module Oper ator Pane l AC In let A C Inle t A5 M S U 1 M S U 2 M S U 0 M S U 1 M S U 2 P .
How the IOM Is Organized 5 – 6 7017 6300 – 005 Table 5 – 1. CMF External Connectivity Options Package Style Name Component Style Name Qty. Description/Content CSB3 – E3U CS Bus 3 External CMF with 3U Feedthru. CSB35000 – 3U 1 CS Bus 3 Feedthru/Terminator card, 3U.
Configuring Channels 7017 6300 – 005 5 – 7 Configuring Channels This subsection: • Identifies channel adapter styles supported on the system • Provides channel loading for supported styles •.
Configuring Channels 5 – 8 7017 6300 – 005 Assigning Channel Loads Table 5 – 3 provides CS-bus loading guidelines for the various channel configurations. CS-bus loading is dependent on bus demand factor (BDF), which provides a gauge of CS- bus availability when the channel requires service.
Configuring Channels 7017 6300 – 005 5 – 9 Configuration Guidelines Figure 5 – 5 is a CIOM/CMF/CS-Bus and channel diagram. Table 5 – 4 provides guidelines for configuring channels.
Configuring Channels 5 – 10 7017 6300 – 005 Table 5 – 4. Guidelines for Configuring Channels Rule Description Number of CMFs per CIOM Standard: 4 CMFs per CIOM (CMF 0, 1, 2, 3 per CIOM) Maximum: Up to a maximum of 16 external CMFs per domain (32 CMFs per system) for NX5820.
Configuring Channels 7017 6300 – 005 5 – 11 Table 5 – 4. Guidelines for Configuring Channels Rule Description Channels Total Channels for NX5820 System: A total of 254 logical channels are available per system. For Domain 0, 130 physical channel connections are available (15 external CMFs x 8 = 120 channels plus 10 internal channels.
Configuring Channels 5 – 12 7017 6300 – 005 Configuration Diagrams Figure 5 – 6 and Figure 5 – 7 are examples of typical channel configurations.
Configuring Channels 7017 6300 – 005 5 – 13 A5 P1 P2 P3 M A I N T L A N Do m ain 0 CS-5 R1 CS-5 R2 CS-5 R4 CS-5 R3 CS-5 R8 CS-5 R7 CA322-SCI CA322-SCI CA626-BAS A4 A3 A2 A1 A0 B8 BT B7 B6 B5 B0 AT.
Configuring Channels 5 – 14 7017 6300 – 005 0714A B0 P1 P2 P3 M A I N T L A N Do m ai n 1 CS-5 R1 CMF0 CS-5 R2 CS-5 R3 CS-5 R4 B1 B2 B3 B4 B5 CMF1 CMF2 CMF3 CS-5 R7 CS-5 R8 CA322-SCI CA322-SCI A5 .
PCITHRU Feature Card 7017 6300 – 005 5 – 15 PCITHRU Feature Card The PCITHRU card (style PCI3-FTH) permits expanded use of a server connected CSBus by allowing the server to be connected to a channel rack slot (internal or external), thus enabling connection of additional channels to the same CSBus.
PCITHRU Feature Card 5 – 16 7017 6300 – 005 Jumper position 1 2 3 4 0795 PCITHRU Channel Slot No. PCI Bridge Jumper Position 12 23 3 1 4 1 1 Default jumper position Figure 5 – 9.
Configuring QIC Tape and CD-ROM 7017 6300 – 005 5 – 17 Configuring QIC Tape and CD-ROM Standard system models include both quarter-inch cartridge (QIC) tape and CD-ROM. Refer to the Unisys e-@ction ClearPath Enterprise Servers A Series and NX Systems I/O Configuration Guide (7008 6087) for guidelines on configuring these devices.
Information Contained in the NX Systems I/O Configuration Guide 5 – 18 7017 6300 – 005 • Peripheral devices supported on the system: − Comprehensive listing of device styles − Migration/new .
7017 6300 – 005 6 – 1 Section 6 Configuring the Servers How This Section Is Organized This section contains the following information: • Describes the features provided with − VX1305-BSE/-BSU .
VX1305 Servers 6 – 2 7017 6300 – 005 VX1305 Servers Note: This configuration guide lists the basic features and options offered with VX1305 servers. The VX1305 server supports Windows NT. Your Unisys representative can provide details on server options available beyond those documented here.
VX1305 Servers 7017 6300 – 005 6 – 3 Table 6 – 1. Basic Features, VX1305 Servers VX1305 Servers Processors 2,3 Memory 4 10/100 Mbps LAN Interface 3.5-Inch 1.44-MB Floppy Disk Drive CD-ROM Drive DAT Tape Drive 7 RAID 9-GB Hard Disk Drives 5 Min. Max.
VX1305 Servers 6 – 4 7017 6300 – 005 Server A Addi tion al Proc essors Server A (Requ ired) QTY. 1 VX1305-BSE DSR2 450-512 or DSR35 00-512 (Curr ently ava ilable) DSR2 00081-P 2U QTY. 0 - 1 Addi tion al Memory NX130 5-1NT Conn ection Packag e Use r Access Comp onent s Software QTY.
VX1305 Servers 7017 6300 – 005 6 – 5 Server Components This subsection provides ordering information for VX1305-BSE/-BSU server components Orders for server A (server position 1) must include the .
VX1305 Servers 6 – 6 7017 6300 – 005 Table 6 – 2. VX1305-BSE/-BSU Basic Components Component Style Name Description Qty ADP68501-FTF 68F/50F SCSI CABLE ADAPTER 1 CAG31-DR2 3X RAID CAGE, DR2 1 CB.
VX1305 Servers 7017 6300 – 005 6 – 7 Additional Memory Packages Table 6 – 4 lists the additional memory packages available for use with VX1305 servers at time of initial system order . Table 6 – 4. Memory Packages, VX1305 Servers Style Number Qty.
VX1305 Servers 6 – 8 7017 6300 – 005 Optional User Access Components Table 6 – 6 lists components included with the optional user access components package, style VX4000-CP3 . Table 6 – 6. VX4000-CP3 Optional User Access Components, VX1305 Servers Style Number Qty.
VX1305 Servers 7017 6300 – 005 6 – 9 Configuration Guidelines VX1305 Table 6 – 7 lists guidelines for configuring VX1305 servers. Figure 6 – 2 shows the connection from a VX1305 server to the CIOM card in the CEC module or to the PCI Thru card in channel racks.
VX1505 Servers 6 – 10 7017 6300 – 005 VX1505 Servers Note: This configuration guide lists the basic features and options offered with VX1505 servers. The VX1505 servers supports Windows NT. Your Unisys representative can provide details on server options available beyond those documented here.
VX1505 Servers 7017 6300 – 005 6 – 11 Table 6 – 8. Basic Features, VX1505 Servers VX1505 Servers 4 Processors 2,3,8 Memory 4 10/100 Mbps LAN Interface 3.5-Inch 1.44-MB Floppy Disk Drive CD-ROM Drive DAT Tape Drive 7 RAID 9-GB Hard Disk Drives 5 Min.
VX1505 Servers 6 – 12 7017 6300 – 005 Table 6 – 9. VX1505-BSE Processor Requirements No. of Installed Processors VRMs Required Terminators Required Notes 1 2 3 1st processor requires 2 VRMs. 3 terminators are required (XER2400-TRM) 2 3 2 2nd processor requires 1 additional VRM.
VX1505 Servers 7017 6300 – 005 6 – 13 Server A Server A (Required) QTY. 1 VX 1505 -B SE 0717 Server B (Optional) QTY. 1 DIM5072-128 DIM5072-256 1X128 MB DIMM 1X256 MB DIMM Memory Qty. 4 - 32 (in sets o f 4) Must be same ty pe DIM5072-128 DIM5072-256 1X128 MB DIMM 1X256 MB DIMM Qty.
VX1505 Servers 6 – 14 7017 6300 – 005 Connection Package NT Software From Previous Page Select NX5820-1NT 0716 Optional Tape Backup From Previous Page Select NXU58 10-NT Connection Package Optiona.
VX1505 Servers 7017 6300 – 005 6 – 15 Processors Table 6 – 11 lists the processor boards available for use with VX1505 servers . Table 6 – 11. Processors, VX1505 Servers Component Style Number Description Qty.
VX1505 Servers 6 – 16 7017 6300 – 005 Connection Packages and Optional PCI Thru Card Table 6 – 13 list components included with the connection packages for VX1505 servers.
VX1505 Servers 7017 6300 – 005 6 – 17 Optional User Access Components Table 6 – 14 lists components included with the optional user access components package, style VX4000-CP3 . Table 6 – 14. VX4000-CP3 Optional User Access Components, VX1505 Servers Style Number Qty.
VX1505 Servers 6 – 18 7017 6300 – 005 Configuration Guidelines VX1505 Table 6 – 15 lists guidelines for configuring VX1505 servers. Figure 6 – 4 shows the connection from a VX1505 server to the CIOM card in the CEC module or to the PCI Thru card in channel racks.
ES5085R Servers 7017 6300 – 005 6 – 19 ES5085R Servers Basic Features • One to ten (Five maximum per domain) − ES5085R servers (Package Style ESR508151-GZN) • One to eight 550-Mhz processors.
ES5085R Servers 6 – 20 7017 6300 – 005 Table 6 – 16. Basic Features, ES5085R Servers ES5085R Servers Processors 2,3 Memory 4 3.5-Inch 1.44-MB Floppy Disk Drive CD-ROM Drive DAT Tape Drive 7 RAID Hard Disk Drives Min. Max. Std. Std. Std. Std. Max.
ES5085R Servers 7017 6300 – 005 6 – 21 Server Components This subsection provides ordering information for ES5085R server components Orders for initial server A (server position 1) must include th.
ES5085R Servers 6 – 22 7017 6300 – 005 Initi al Serve r QTY. 1 ES5085R Package Style (E SR5 08 15 1-GZ N) Additional Serve r Processors DIM616 8-128 DIM616 8-256 DIM616 8-512 1X128 M B DIMM 1X256 M B DIMM 1X512 M B DIMM Memor y Qty. 1 - 32 Must be same type Processors Memor y Qty.
ES5085R Servers 7017 6300 – 005 6 – 23 Processors Table 6 – 17 lists the processor boards available for use with ES5085R servers . Table 6 – 17.
ES5085R Servers 6 – 24 7017 6300 – 005 Connection Packages and Optional PCI Table 6 – 19 list components included with the connection packages for ES5085R servers.
ES5085R Servers 7017 6300 – 005 6 – 25 Optional User Access Components Table 6 – 20 lists components included with the optional user access components package, style VX4000-CP3 . Table 6 – 20. VX4000-CP3 Optional User Access Components, ES5085R Servers Style Number Qty.
ES2024R Servers 6 – 26 7017 6300 – 005 ES2024R Servers Basic Features • One to ten (Five maximum per domain) − ES2024R servers (Package Style ESR202141-GZN) • One or two processors per serve.
ES2024R Servers 7017 6300 – 005 6 – 27 Table 6 – 21. Basic Features, ES2024R Servers ES2024R Servers Processors 2 Memory 3 3.5-Inch 1.44-MB Floppy Disk Drive CD-ROM Drive DAT Tape Drive 5 RAID Hard Disk Drives Min. Max. Std. Std. Std. Std. Max. Per Server 1,4,6 1 to 2 0.
ES2024R Servers 6 – 28 7017 6300 – 005 Server Components This subsection provides ordering information for ES2024R server components Orders for initial server A (server position 1) must include th.
ES2024R Servers 7017 6300 – 005 6 – 29 Initi al Serve r QTY. 1 ES2024R Package Style (E SR2 02 14 1-GZ N) Additional Serve r Processors DIM133 68-128 DIM133 68-256 DIM133 68-512 1X128 M B DIMM 1X256 M B DIMM 1X512 M B DIMM Memor y Qty. 1 - 32 Must be same type Processors Memor y Qty.
ES2024R Servers 6 – 30 7017 6300 – 005 Processors Table 6 – 22 lists the processor boards available for use with ES2024R servers . Table 6 – 22.
ES2024R Servers 7017 6300 – 005 6 – 31 Connection Packages and Optional PCI Table 6 – 24 list components included with the connection packages for ES2024R servers.
ES2024R Servers 6 – 32 7017 6300 – 005 Optional User Access Components Table 6 – 25 lists components included with the optional user access components package, style VX4000-CP3 . Table 6 – 25. VX4000-CP3 Optional User Access Components, ES2024R Servers Style Number Qty.
ES5044R Servers 7017 6300 – 005 6 – 33 ES5044R Servers Basic Features • One to ten (Five maximum per domain) − ES5044R servers (Package Style ESR504141-GZN) • One or four processors per serv.
ES5044R Servers 6 – 34 7017 6300 – 005 Table 6 – 26. Basic Features, ES5044R Servers ES5044R Servers Processors 2,3 Memory 4 3.5-Inch 1.44-MB Floppy Disk Drive CD-ROM Drive DAT Tape Drive 7 RAID Hard Disk Drives Min. Max. Std. Std. Std. Std. Max.
ES5044R Servers 7017 6300 – 005 6 – 35 Server Components This subsection provides ordering information for ES5044R server components Orders for initial server A (server position 1) must include th.
ES5044R Servers 6 – 36 7017 6300 – 005 Initial Server QTY. 1 ES5044 R Pack age St yle (ESR5041 41-G ZN) Addi tiona l Server Proces sors DIM10068-64 DIM10068-12 8 DIM10068-25 6 DIM10068-51 2 1X64 MB DIMM 1X128 MB DIMM 1X256 MB DIMM 1X512 MB DIMM Memory Qty.
ES5044R Servers 7017 6300 – 005 6 – 37 Processors Table 6 – 27 lists the processor boards available for use with ES5044R servers . Table 6 – 27.
ES5044R Servers 6 – 38 7017 6300 – 005 Connection Packages and Optional PCI Table 6 – 29 list components included with the connection packages for ES5044R servers.
ES5044R Servers 7017 6300 – 005 6 – 39 Optional User Access Components Table 6 – 30 lists components included with the optional user access components package, style VX4000-CP3 . Table 6 – 30. VX4000-CP3 Optional User Access Components, ES5044R Servers Style Number Qty.
Configuring the Private Maintenance Hub and Public Switching LAN 6 – 40 7017 6300 – 005 Configuring the Private Maintenance Hub and Public Switching LAN Tables 6 – 31 and 6 – 32 show the assignment for a single domain system with one or two switching LANs, respectively.
Configuring the Private Maintenance Hub and Public Switching LAN 7017 6300 – 005 6 – 41 Table 6 – 31. Configuring Single Domain Maintenance Hub and One Switching LAN Using Public Switching LAN A.
Configuring the Private Maintenance Hub and Public Switching LAN 6 – 42 7017 6300 – 005 Table 6 – 32. Configuring Single Domain Maintenance Hub and Two Switching LANs Private Maintenance Hub A (.
Configuring the Private Maintenance Hub and Public Switching LAN 7017 6300 – 005 6 – 43 Table 6 – 32. Configuring Single Domain Maintenance Hub and Two Switching LANs Using Public Switching LAN B (Bay Network 350 T) Port Destination Comments 10 11 12 13 14 15 16 802.
Configuring the Private Maintenance Hub and Public Switching LAN 6 – 44 7017 6300 – 005 Table 6 – 32. Configuring Single Domain Maintenance Hub and Two Switching LANs Using Public Switching LAN B (Cisco 2924 XL) Port Destination Comments 12 13 14 15 16 17 18 19 20 21 22 23 24 802.
Configuring the Private Maintenance Hub and Public Switching LAN 7017 6300 – 005 6 – 45 Table 6 – 33 shows the assignment for a dual domain systems with one Public Switching LAN.
Configuring the Private Maintenance Hub and Public Switching LAN 6 – 46 7017 6300 – 005 Table 6 – 33. Configuring Dual Domain Maintenance Hub and One Public Switching LAN (Cont.
Configuring the Private Maintenance Hub and Public Switching LAN 7017 6300 – 005 6 – 47 Table 6 – 34 shows the assignment for a dual domain systems with two Public Switching LAN.
Configuring the Private Maintenance Hub and Public Switching LAN 6 – 48 7017 6300 – 005 Table 6 – 34. Configuring Dual Domain Maintenance Hub and Two Public Switching LANs Using Public Switching LAN A (Bay Network 350 T) Port Destination Comments 5 6 7 8 9 10 11 12 13 14 15 16 NT Server I 802.
Configuring the Private Maintenance Hub and Public Switching LAN 7017 6300 – 005 6 – 49 Table 6 – 34. Configuring Dual Domain Maintenance Hub and Two Public Switching LANs Using Public Switch LAN A (Cisco 2924 XL) Port Destination Comments 13 14 15 16 17 18 19 20 21 22 23 24 802.
Configuring Optional and Recommended UPS 6 – 50 7017 6300 – 005 Configuring Optional and Recommended UPS The Uninterruptible Power Supply (UPS) option enables the system to gracefully shut down in the event of a power interruption on the main supply line .
Configuring Optional and Recommended UPS 7017 6300 – 005 6 – 51 Table 6 – 35. UPS Options Component Style Name Interconnect Configuration and Cable Part No.
Configuring Optional and Recommended UPS 6 – 52 7017 6300 – 005 Table 6 – 36. Status Selection Between SCP ’ s and Servers VX1305-BSE/BSU Servers FROM TO SCP A SCP B SERVER A SERVER B SERVER .
Configuring Optional and Recommended UPS 7017 6300 – 005 6 – 53 UPS SCP Interc onnect C able 7015 5 403 (See Note) UPS Jumper Cable Asse mbly 7015 62 60-XXX or 7015 54 11-XXX or 7015 54 29-XXX or .
Configuring Optional and Recommended UPS 6 – 54 7017 6300 – 005 UPS Fi r s t Ser v er SCP B Interconnect Cable 7015 5403-XXX (See Note 2) UPS Jumper Cable Assembly (See Note 1) 7015 5403-000 7015 .
Configuring Optional and Recommended UPS 7017 6300 – 005 6 – 55 If a site UPS is not used, Unisys highly recommends at a minimum that a small individual UPS ’ s provided power and status connections to each SCP in the system (2 UPS for redundant SCP).
Configuring Optional and Recommended UPS 6 – 56 7017 6300 – 005.
7017 6300 – 005 7 – 1 Section 7 Connecting Other Host Systems Table 7 – 1 lists guidelines for connecting other host systems via the I/O subsystem.
Connecting Other Host Systems 7 – 2 7017 6300 – 005.
7017 6300 – 005 Glossary – 1 Glossary A APC Automatic Power Control ASIC Application specific integrated circuit ATM Asynchronous transfer mode C CSE Common scan engine central processing module (CPM) The computer hardware unit that controls and executes the instructions contained in object code files.
Glossary Glossary – 2 7017 6300 – 005 D DAC Direct access channel DDMP Dual-domain, multiple-processor DIMM Dual inline memory module data transfer unit (DTU) The subunit of an I/O module (IOM) that provides memory-to-memory data transfers for use in disk caching.
Glossary 7017 6300 – 005 Glossary – 3 I IOCB Input/Output Control Block I/O module (IOM) (1) A hardware module that interfaces with the I/O subsystem and schedules tasks by using a message protocol.
Glossary Glossary – 4 7017 6300 – 005 MSUA Memory storage unit A style MSUK Memory storage unit K style memory storage unit (MSU) One of up to three storage modules in each domain of the NX5820 th.
Glossary 7017 6300 – 005 Glossary – 5 U UPS Uninterruptible power supply USD Unity storage device.
Glossary Glossary – 6 7017 6300 – 005.
7017 6300 – 005 Index – 1 Index A acronyms, system components, 1-7 Additional Memory Packages, 6-7 Add-On Processor Board, 6-6 Add-On Processor Board, VX1305 Servers, 6-6 array processing, 1-2 B B.
Index Index – 2 7017 6300 – 005 Connection Package Components, ES5044R Servers, 6-38 Connection Package Components, ES5085R Servers, 6-24 Connection Package Components, VX1305 Servers, 6-7 Connect.
Index 7017 6300 – 005 Index – 3 NX5820 Memory, 3-1 NX5820 Product Configurations, 2-3 NX5820 Products, 2-1 NX5820 System Upgrades, 2-26 O operator display terminal (ODT), 3-11 operator display wor.
Index Index – 4 7017 6300 – 005 VX1505 Servers, 6-10 VX1505 Single-Server to Multi-Server Upgrades, 6-17 VX1505-BSE Processor Requirements., 6-12 VX4000-CP3 Optional User Access Components, ES2024.
.
*70176300-005* 70176300 – 005.
Ein wichtiger Punkt beim Kauf des Geräts Unisys NX5820 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Unisys NX5820 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Unisys NX5820 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Unisys NX5820 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Unisys NX5820 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Unisys NX5820 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Unisys NX5820 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Unisys NX5820. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Unisys NX5820 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
