Benutzeranleitung / Produktwartung XCAI680 des Produzenten Uniden
Zur Seite of 64
.
.
CONTENTS Handset Controls and Keys ......................................................................................................... 1 Base Unit Controls and Keys ................................................................................
Programming Your Phone . . . . . . . . . . . . ~ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Storing a Caller ID memory number in Dial Memory .
Handset Controls and Keys 1. LCD Display 2. talk Key 3. Numeric Keypad 4. flash/function Key 5. redial/pause Key 6. caller id/c wait Key 7. mem Key 8. channel/delete Key 9.
Base Unit Controls and Keys 1234 5 67 89 11 1. Base Ringer Volume Switch 13. Record Time/Ann/4/1 Switch 2. Pulse/Tone Switch 14. Message Repeat Button 3. DC Power Jack 15. Message Skip Button 4. Telephone Line Jack 16. Message Play Button 5. Handset Retainer 17.
Important Safety Instructions When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10 11 12. 13. Read and understand all instructions.
Battery Safety Precautions Caution: To reduce the risk of fire or injury to persons by the battery read and follow these instructions: 1. Use only the appropriate type and size Battery Pack specified in this Operating Guide. 2. Do not dispose of the Battery Pack in a fire.
Introduction Congratulations on your purchase of the Uniden XCAI680 Cordless Telephone with Digital Answering System and Caller Display. This phone is designed to exacting standards which provide reliability, long life, and outstanding performance.
Included with the XCAl680 If any of these items are missing or damaged, contact the place of purchase. Handset Two Mounting Screws Base Unit Rechargeable Battery Part # CTA885 Telephone Cord Remote Access for Australia Memo Cards AC Adapter (AAD-650U) Registration Card Operating Guide Memo Paper - -----~-- Quick Start Guide Important Notice.
Important Electrical Considerations Unplug all electrical appliances when you know an electrical storm is approaching. Lightning can pass through your household wiring and damage any device connected to it. This phone is no exception. Warning: Please do not attempt to unplug any appliance during an electrical storm.
Installation Selecting a Location Before choosing a location for your new phone, there are some important guidelines you should consider: l The location should be close to both a phone jack and continuous power outlet.
Connecting the Telephone Cord Consider these safety guidelines before connecting the telephone cord: CAUTION: l Never install telephone wiring during a lightning storm. l Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected.
Desk or Tabletop Installation 1. Place the Base on a desk or tabletop. 2. Plug one end of the telephone cord into the TEL LINE jack on the Base Unit. 10.
3. Plug the AC Adapter cord into the 9V DC input jack on the Base Unit. 1 4. Place the AC Adapter cord around the strain relief. 5. Plug the other end of the telephone cord into the telephone jack on the wall. 4 6. Plug the AC Adapter into a standard 230-240V AC wall outlet and make sure it is switched on.
Direct Wall Mounting You can mount your phone directly on a wall. Before mounting your phone, consider the following: l Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
4. Plug the AC Adapter cord into the 9V DC input jack on the Base Unit. 5. Place the AC Adapter cord inside the molded channel. 6. Place the Base Unit on the screws and push down until it’s firmly seated. , 7. Plug the other end of the telephone line cord into the wall jack.
8. Plug the AC Adapter into a standard 230V-240V AC wail outlet and make sure it is switched on. ! Use only the Uniden AC Adapter supplied with this phone. Setting the Handset Retainer The Handset Retainer holds the Handset in place if your phone is mounted on a wall.
3. Put the retainer back into its slot on the Base Unit. 4. Push down on the Handset Retainer until it snaps into place. 15.
Setting Up Your Phone Extending the Base Unit Antenna Before using your phone, be sure to raise the antenna to the vertical position, and fully extend at all times. , Installing the Handset Battery Pack 1. Press in on the Battery Cover Release. 2. Slide the battery compartment cover down.
3. Align the plastic connector of the Nickel-Cadmium battery pack with its socket and plug it in. Note: The black lead will be on the left when the plug is properly aligned. 4. Place the battery pack inside the battery compartment, and slide the battery cover back on.
Cleaning the Battery Contacts To maintain a good charge, it is important to clean all charging contacts on the Handset and Base Unit about once a month.
Charging the Battery Pack Initial Battery Charging The rechargeable Nickel-Cadmium battery pack must be fully charged before using your phone for the first time. We recommend that the battery pack charge for approximately 15-20 hours, without interruption, before plugging the phone line into your new phone.
If the Battery icon begins to flash, the phone is programmed to eliminate its functions to save power. The table below describes what to do to return your phone to normal operation. DURING A CALL IN STANDBY MODE Only the @ button operates. None of the buttons will operate.
Handset Volume Controls Please refer to the foldout in front of your operating guide for key positions. To adjust the ringer volume of your Handset, press volume/cancel until you hear the desired ringer tone and volume.
To adjust the Base speaker volume, press the volume control buttons to achieve the desired setting. Automatic Digital Code Security To help prevent unauthorized calls on your phone, a Digital Code feature has been included in all XCAI680 phones. This Digital Code is shared only between the Handset and Base Unit.
2. After the Handset stops beeping, remove it from the Base Unit. 3. Wait 5 seconds then place the Handset on the Base Unit. 4. The Battery icon will blink to indicate that the Digital Security Code is set to one of the more than 65,000 codes.
If the Base Unit loses power while the Handset is off the Base, the Digital Code may be erased. When this happens, the Handset will not function. To re-establish communication between the Handset and Base Unit: 1. Restore power to the Base Unit. 2. Place the Handset back on the Base Unit.
Setting Caller ID on Call Waiting Note: This feature is not currently available in Australia. You can set your XCAI680 phone to display information about calls that generate a call waiting tone while you are on a call.
Setting the AutoTalk Feature To turn AutoTalk on: 1. Remove the Handset from the Base Unit. 2. Press flash/function three times. 3. Press 1. 4. Press mem. A confirmation tone sounds and the display remains on for two seconds. To turn AutoTalk off: 1. Remove the Handset from the Base Unit.
To turn Name Tag on. 1. Remove the Handset from the Base Unit. 2. Press flash/function five times. 3. Press 1. 4. Press mem. A confirmation tone sounds and the display remains on for two seconds. To turn Name Tag off. 1. Remove the Handset from the Base Unit.
Setting the Caller ID Number Grouping Feature (using Hyphen) For ease of reading Caller ID Number, Uniden added this extra feature. To turn Hyphen on: 1. Remove the Handset from the Base Unit. 2. Press flash/function four times. 3. Press I. 4. Press mem.
Using Your Phone Please refer to the foldout in front of your operating guide for key positions. Making Calls 1. Remove the Handset from the Base Unit, 2. Dial the number you wish to call. For example, 1234-5678 3. If you entered a wrong number, press chan/delete to backspace until the number is erased.
Receiving Calls Note: You must subscribe to a Caller Display Service from your telephone service provider for the caller’s number to be displayed. When the phone rings, the LCD displays information about the person calling you.
Answering a Call with AutoTalk Enabled If you have enabled the AutoTalk feature, just remove the Handset from the Base to answer an incoming call. See “Setting the AutoTalk Feature” on page 26 for details on setting AutoTalk. Answering a Call without AutoTalk Enabled When the phone rings, pick up the Handset and press talk.
5. Press talk button to end the current call. 6. The phone will ring back indicating that the first caller is still on hold. 7. Press talk button to answer this call. 8. Press talk button to end the call. Note: Pressing the c wait button during the call will toggle between callers.
Using the Flash Key with Call Waiting To access the Telstra’s Call Waiting service, you can either use the c wait button or the flash key 1. While talking you hear the call waiting signal. 2. Press f/ash/function then 2 to switch call and put the current call on hold.
The Caller ID Display Using Caller ID To make use of these features, you must first subscribe to your telephone service provider. The LCD displays information about the current call and previous calls received on your XCAI680 cordless phone, including the total calls received, and the number of new calls received.
4. To see ail calls stored in memory, press the A key repeatedly until the LCD displays END. 5. To see the time and day a call was received: a. While the number is displayed press 80. b. To return to the number display press 8/@ again. 6. To see how many times a caller has phoned: a.
4. To see ail calls stored in memory, press the A key repeatedly until the LCD displays END. 5. To see the time and day a call was received: a. While the number is displayed press 80. b. To return to the number display press 8/@ again. 6. To see how many times a caller has phoned: a.
Programming Your Phone Storing a Caller ID memory number in Dial Memory There are 20 dial memory locations in the XCAI680 cordless phone. You can store any number in your Caller ID memory in Dial Memory so it can be used later with memory dialing. See Calling a Number Stored in Memory on page 38 for details on how to use the memory dial feature.
6. Enter a name up to 13. characters long using the V and A keys to select characters and the 4 or b button to move one character to the left or right. For example, to enter the name Bob Jones: Press V until B is displayed in the LCD. Press 3 (b) to move one character to the right.
Calling a Number Stored in Memory Use this feature to dial a number previously stored in memory. See Storing a Caller ID memory number in Dial Memory on page 36 or Storing a Regular Number in Dial Memory on page 36 for details. 1. Remove the Handset from the Base Unit.
To edit the number entry in dial memory, for example, to change 5678 to 1234: Press mem. k5F-I Press chan/delete four times. -1 Enter 1234. To edit the name entry in dial memory, for example to change Bob Jones to Tom Jones: Press mem again. IS-Gz-l Press V until T is displayed in the LCD.
The Integrated Answering System The XCAI680 has a built-in Answering System which answers incoming calls and records your messages. You can also use your new Answering System to leave a memo message for someone else who will use the phone, or to announce a special message when you’ll be away from your phone.
Answering System Setup Turning the Answering System On/Off 1. To turn the Answering System on, press answer. A tone sounds, and the current outgoing message plays on the Base Unit speaker. A second tone sounds to indicate the unit is ready to answer calls, and the Message Counter LED turns on.
5. To set AM, press #on the Handset. To set PM, press #on the Handset. 6. Press the flash/function key again. /Vote: A beep indicates the new time is programmed, and the new Time and Day Stamp is announced from the Base speaker. You are then prompted for a PIN code.
Recording Your Personal OGM 1. To record an outgoing message, press and hold ogm. Start recording your message after you hear the long tone and the Message Counter LED begins to count up. 2. Do not get closer than 30 cm to the microphone, and speak clearly while recording your message.
A tone will sound, and you will hear the preset message “Hello. No one is available to take your call, please leave your message after the tone” on the Base Unit speaker. A second tone sounds after the preset message plays, and the Answering System automatically returns to Standby.
Using the Reset Button The RESET button is used to erase all recorded outgoing messages and any messages which are saved in memory. Pressing RESET does not erase your PIN (Personal Identification Number) code or the security code between the Handset and Base Unit.
Using Your Answering System Playing New Messages When the message counter flashes, you have received new messages. 1. 2. Press */new. The time and day each message was received is announced after the message is played, and the Message Counter LED displays the number of the message playing.
Playing a Stored Message 1. Press F/)~ky. The first message stored begins playing. The time and day each message was received is announced after the message is played. The Message Counter LED displays the number of the message playing. Note: If you want to stop reviewing your messages, press w /stop 2.
2. Press44 /repeat at anytime to replay a message. Note: Pressing 4 /repeat during a message returns the system to the beginning of that message. Pressing 4 /repeat again before the message replays causes the system to scan back one message. if you have several messages, press 4 /repeat until you return to the message you want to replay.
3. Press m /stop at anytime to stop reviewing messages and return to Standby. The Message Counter LED shows the total number of messages. Note: The system automatically returns to Standby when all messages have been played. Deleting a Message 1. Press b/p/qf to review your messages.
Deleting All Messages You can delete all your messages without deleting each separate message. To delete all the messages, you must use the delete button on the Base Unit. Note: You must review all messages before using the “Delete All Messages” function.
Message Full Indication The XCAI680c has a maximum record time of approximately 20 minutes, or up to 40 incoming messages. When the memory is full, the Answering System will not record incoming calls. To return the system to normal operation, follow these steps.
3. After you have recorded your message, the system returns to Standby. Note: If you have new or unplayed messages, the Message Counter LED on the Base Unit will continue to flash. When all the messages have been reviewed, the Message Counter LED shows the number of stored messages but does not flash.
Remote Operation You can operate your XCAI680 while you’re away from home by calling from any touch-tone phone. When using this feature, remember these important guidelines. l You should change your Personal Identification Number (PIN) before using your Handset.
Troubleshooting If your XCAI680 Integrated Telephone Answering Device is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service for assistance.
Answering System Troubleshooting Chart Problem Suaaestion Answering System does not work. Answering System does not answer calls. Messages are incomplete. After a power failure, the outgoing message is deleted. Message Counter LED flashes the letter P.
Caller ID Troubleshooting Chart Problem Caller ID Feature not working. Suggestion l You must subscribe to a caller ID Display Service first. l Please contact your Telephone company to subscribe to this service. Calling party name is not displayed. Caller ID On Call Waiting (CIDCW) is not working.
Specifications General Frequency Control Modulation Operating Temperature Base Unit Receive Frequency Transmit Frequency Power Source Size Weight Flash Time Handset Receive Frequency Transmit Frequenc.
Warrantv UNIDEN XCAl680 1 YEAR WARRANTY (Batteries and Accessories are covered for 90 Days ONLY) Note: Please keep your sales docket as it provides evidence of warranty.
631998 Uniden Australia Pty Limited. Printed in China.
Ein wichtiger Punkt beim Kauf des Geräts Uniden XCAI680 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden XCAI680 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden XCAI680 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden XCAI680 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden XCAI680 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden XCAI680 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden XCAI680 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden XCAI680. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden XCAI680 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
