Benutzeranleitung / Produktwartung WDECT3355 des Produzenten Uniden
Zur Seite of 72
WDECT3355 WDECT3355+1 WDECT3355+2 Series Owner ’s Manual OWNER’S MANUAL.
[ i ] • This symbol indicates important operating and servicing instructions. • The earcap of this telephone may attract and retain small metallic objects. INSTALLATION & SAFETY 3 AVOID - connecting more than phones as ringing may be impaired AVOID - multi power boards.
[ ii ] CONTENTS INSTALLATION & SAFETY i CONTENTS ii Controls and Functions 1 Welcome 3 Features 3 Terminology 4 Mounting the Base Unit on a Wall 5 Battery Maintenance 6 Installing the Beltclip 7 H.
G E T T I N G S T A R T E D [ 1 ] CONTROLS AND FUNCTIONS 2 1 3 5 4 6 7 8 9 10 11 12 22 15 13 18 19 16 20 21 17 14 Repeat Key Delete Key Stop Key Play Key Skip Key Select/ Key 1. Handset Antenna 2. Headset Jack Cover 3. Beltclip Hole 4. Hands-Free Speaker 5.
[ 2 ] 49 50 33 34 35 36 37 38 39 46 47 48 23 24 25 26 27 28 29 30 32 31 40 41 42 43 44 45 23. Base Speaker 24. Clock/MENU Key 25. repeat/SELECT Key 26. delete Ke y 27. Charge LED 28. Message Counter Display 29. In use L ED 30. play/stop Ke y 31. skip/SELECT K ey 32.
[ 3 ] Great features of this cordless phone include: • Designed and Engineered in Japan • Wide Band Digital Technology • Multi (4) Handset Capable • Digital Duplex Speakerphone on Handset Adva.
[ 4 ] Throughout this manual, terms such as Standby and Talk Mode are used. Below is the terminology explanation. Standby Mode - The handset is not in use, is off the cradle, and or speaker , or has not been pressed. A dial tone is not present. Talk Mode - The handset is not in the cradle and or speaker , or has been pressed enabling a dial tone.
[ 5 ] MOUNTING THE BASE UNIT ON A WALL 3mm 100mm 35mm You can mount your base directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
[ 6 ] BATTERY MAINTENANCE Cleaning the battery charging contacts To maintain a good charge, it is important to clean the charging contacts on the handset once a month.
[ 7 ] INSTALLING THE BELTCLIP To attach the beltclip Insert the beltclip into the holes on each side of the handset. Press down until it clicks into place.
[ 8 ] HEADSET INSTALLATION DISPLAY AND ICONS SUN 12:00A Handset #1 New: 5 :OFF Day of the week and time / batter y icon Handset ID and Banner Number of new Caller ID calls received / Ringer of f icon (when the ringer is Of f) Example of the standby mode display ICON STATUS DESCRIPTION Standby/Talk Battery icon indicates the handset battery status.
[ 9 ] There are 6 main menu options, ( DirectLink Mode, Room Monitor, Handset Setup, Answ. Setup, Global Setup and System Reset ) and submenu options. Summary of the Main Menu and Submenu Two Way Comm.
[ 10 ] Handset Setup The following submenu options must be set separately for each handset. Submenu name Description Ringer Tones Adjusting the ringer tone (tone your phone makes when ringing) (Default is Flicker) (see page 15). Set the distinctive ring (see page 15).
[ 11 ] Answering Setup This main menu option allows you to set up TAD settings from your handset. You can also set these submenu options from the base (see page 44). Submenu name Description Security Code Select a two-digit Personal Identification Number (PIN) code.
[ 12 ] Global Setup If you change one of the Global settings, you change the setting for all additional handsets. Only one handset can change Global settings at a time.
[ 13 ] Entering the Menu 1) Press the /del key in standby mode. 2) Use /vol/ or /vol/ to move the pointer to a desired main menu ( DirectLink Mode, Room Monitor, Handset Setup, Answ. Setup, Global Setup, and System Reset ). 3) Press to select the desired main menu.
[ 14 ] Room Monitor Using Room Monitor 1) Enter the Room Monitor menu (see “Entering the Menu” on page 13). To Room Monitor appears. 2) Select the handset you want to monitor by using /vol/ or /vol/ . 3) Press . RoomMonitor appears, and you hear sounds in the room where the handset is installed.
[ 15 ] Handset Setup Selecting a Ringer Tone 1) Enter the Handset Setup menu, and then the Ringer Tones submenu (see “Entering the Menu” on page 13).
Setting the Anykey Answer 1) Enter the Handset Setup menu, and then the Anykey Answer submenu (see “Entering the Menu” on page 13). 2) Press /vol/ or /vol/ to select On or Off.
[ 17 ] Record Time 1 Minute 4 Minutes Message Alert On Off Ring Time Toll Saver 4 Times Call Screen On Off Setting the Ring Time 1) Enter the Answ. Setup menu, and then the Ring Time submenu (see “Entering the Menu” on page 13). 2) Press /vol/ or /vol/ to select a Ring Time ( Toll Saver, 4 Times, 6 Times , or 9 Times ) .
[ 18 ] Global Setup Setting Name Tag (POP ID) 1) Enter the Global Setup menu, and then the Name Tag submenu (see “Entering the Menu” on page 13). 2) Press /vol/ or /vol/ to change the selection, On or Off . 3) Press . You will hear a confirmation tone.
[ 19 ] Setting the Dial Mode (Australia only) 1) Enter the Global Setup menu, and then the Dial Mode submenu (see “Entering the Menu” on page 13). 2) Press /vol/ or /vol/ to change the select, Tone or Pulse (the initial setting is Tone). 3) Press .
[ 20 ] System Reset De-register the Handset 1) Enter the System Reset menu, and then the Deregister HS submenu (see “Entering the Menu” on page 13). 2) Press /vol/ or /vol/ to select the handset ID to be de-registered from the list, and then press .
This handset has a built-in speakerphone that allows you to have a hands-free conversation. This feature allows you to communicate easily while performing other tasks, such as cooking. appears during hands-free conversations. You can easily switch a call from normal conversation to hands-free conversation.
[ 22 ] The Keypad Lock prevents user from pressing the keypad accidentally. You can still answer calls, and receive page and phonebook locations, and the keypad lock is reactivated after the operation. To lock the keypad Press and hold tone until you hear a confirmation tone.
The la st three pho ne numbe rs dialed can be quic kly redia led. Redialing from Standby Mode 1) Press redial/pause in standby mode. 2) Press redial/pause again. Each press of redial/pause will display one of the last three number dialed. 3) Press or speaker .
[ 24 ] A D J U S T I N G T H E H A N D S E T R I N G E R , E A R P I E C E A N D S P E A K E R V O L U M E Handset ringer volume Press the volume up key or volume down key (labeled as /vol/ o r /vol/ ) in standby mode to select one of three ringer volume (off, low, or high).
[ 25 ] MUTE MICROPHONE With the handset You can temporarily turn off the microphone so that the person you are talking with cannot hear you. 1) Press /del during talk mode (while phone is in use). 2) Press /vol/ or /vol/ to move the pointer to Mute and then .
[ 26 ] TONE DIALING SWITCH-OVER (AUSTRALIA ONLY) Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing). If you need to enter tone dialing digits, you can switch- over to tone dialing during the call.
[ 27 ] Privacy Mode allows you privacy, and guarantee of no interruption from base and other registered handsets. This works only when the phone is in use . 1) Press /del during talk time (while phone is in use). 2) Press /vol/ or /vol/ to move the pointer to Privacy Mode , and then .
[ 28 ] FLASH AND CALL WAITING FIND HANDSET If you have Call Waiting service and a call waiting tone sounds during a call: AUSTRALIA: Press on the handset or flash on the base, then press 2 to switch between callers. NEW ZEALAND: Press on the handset or flash on the base to switch between callers.
PHONEBOOK [ 29 ] The Phonebook allows you to dial a number using just a few key presses. Your phone stores names/numbers in the phonebook memory location, and you can search names in alphabetical order. You have a total of 100 locations that can be used for the phonebook (including the speed dials) and Caller ID messages.
[ 30 ] 6) Distinctive Ring appears. Press /vol/ or /vol/ to move the pointer to one of the Distinctive Ring options, and then press . 7) Speed Dial appears. Press /vol/ or /vol/ to move the pointer to select the Speed dial location (10 locations: SPD1-SPD0).
[ 31 ] ST EPS FOR ENT ERI NG NAME S A ND S PEC IAL CHA RAC TERS Refer to the letters on the number keys to select the desired characters. With each press of a number key ( - ), the displayed character appears in the following order: upper case letters first, lower case letters next and finally the number corresponding to the key.
[ 32 ] If the next character uses the same number key, you must press to move the cursor over. Otherwise the next time you press the number key, it changes the character that was previously set. If you make a mistake while entering a name Use tone or to move the cursor to the incorrect character.
[ 33 ] During a call, don’t press or the call will be disconnected. VIEWING THE PHONEBOOK Your phone stores names/numbers in the phonebook memory locations, and you can search names in alphabetical order. You can view the phonebook even while the phone is in use.
[ 34 ] MAKING CALLS USING THE PHONEBOOK From Standby Mode 1) When the phone is in standby mode, view the phonebook location to dial (see “Viewing the Phonebook” on page 33). 2) Press o r speaker . The displayed number is dialed. 3) To hang up press .
[ 35 ] 1) When the phone is in standby mode, press phonebook . 2) Press /vol/ or /vol/ , or the number keypad to view the phonebook locations (see “Viewing the Phonebook” on page 33). a. Editing the Stored Data 1) When the phonebook location to be edited appears, press .
[ 36 ] CHAIN DIALING The memory locations in the handset are not limited to phone numbers. You can also store a group of numbers (up to 20 digits), that you need to enter once your call connects. This is referred to as Chain Dialing. An example of this is a bank account number.
[ 37 ] You must subscribe to Caller ID services through your local telephone provider to use these features. When the telephone rings, the Caller ID feature allows you to view the caller’s name, and phone number along with the date and time of call.
[ 38 ] VIEWING THE CALLER ID LIST The Caller ID list stores information for incoming calls - even unanswered calls. You can store 100 of the Caller ID messages and Phonebook locations (including SpeedDials) in total. You can view the Caller ID list during a call or when the phone is in standby mode.
[ 39 ] Deleting Information from the Caller ID List 1) When the phone is in standby mode, view the Caller ID information to be deleted (see “Viewing the Caller ID List” on page 38). 2) Press /del . Delete Caller I D appears. 3) Press /vol/ o r /vol/ to choose Yes .
[ 40 ] Calling a party from the Caller ID list From Standby mode 1) When the phone is in standby mode, view the Caller ID message (see “Viewing the Caller ID List” on page 38). 2) Press or speaker . The displayed phone number dials automatically. From Talk mode 1) Press or speaker .
[ 41 ] The phone has a built-in answering system that answers and records incoming calls. You can also use your answering system to record a conversation, leave a voice memo message or to announce a special outgoing message to callers when you’re away from your phone.
[ 42 ] Answering System Default Settings Some answering system functions can be set through the base or handset. Default settings for each function are as follows: 1) To turn the answering system on, press ans on/off when the phone is in standby mode.
[ 43 ] • When the answering system is full, FL appears on the base. You should delete some messages so that the system can record new messages. • Position yourself as near to the base as possible and speak clearly when recording your outgoing message.
[ 44 ] For your convenience, voice prompts will guide you through the menu setup mode. 1) When the phone is in standby mode, press /volume/ or /volume/ repeatedly to scroll through ringer volumes. The ringer level is displayed, and you will hear each volume level.
[ 45 ] Setting the Time Follow these steps to set the clock on the answering system to the correct time. 1) Press clock/MENU . 2) Press skip/SELECT or repeat/SELECT until the correct day is announced and the corresponding number (from 1 Sunday to 7 Saturday) appears.
[ 46 ] Setting the ring time The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message.
[ 47 ] Announce only feature The Announce only feature plays a pre-recorded outgoing message or your own personal outgoing message, but it will not allow the caller to leave a message.
[ 48 ] Setting the call screen You can screen calls when the Call Screen function is set to On. 1) Press clock/MENU six times. The current Call Screen setting (On or Off) appears on the base. 2) Press skip/SELECT or repeat/SELECT to choose On or OF . 3) Press SET .
[ 49 ] The message counter displays the number of messages stored in memory. If the display flashes, then there are new messages waiting for you. The answering system plays your new messages first. After you play all your new messages, you can then play your old messages.
[ 50 ] Skipping a message 1) Press play/stop to review your messages. The number of stored messages is announced. 2) Press skip/SELECT at anytime to skip to the next message. Each time skip/SELECT is pressed, the system scans forward one message. If you have several messages, press skip/SELECT repeatedly to find the message you want to play.
[ 51 ] Voice memo The voice memo function allows the user to record messages (more than 2 seconds and within 4 minutes). 1) Press and hold memo record . You hear a beep. 2) Start your recording after the announcement “Record Memo Message” and a confirmation tone.
[ 52 ] You can check, play, or delete messages, even record a new greeting message from a remote location (when you are away from home, or from another room using a handset).
[ 53 ] * To repeat a message, press # then 1 within about four seconds to repeat the previous message, or press # then 1 after about four seconds to repeat the cur- rent message. ** For the Memo Record and Greeting Message Record functions, the first time you enter the corresponding command, it starts the Recording function.
[ 54 ] * For Repeat a Message function, press 1 within about four seconds to repeat the previous message, or press 1 after about four seconds to repeat the current message. ** For Memo Record and Greeting Message Record function, the first time you enter the corresponding command, it starts the Recording function.
[ 55 ] 4 Multi-Handset Expendability Your phone supports up to 4 handsets (including the handset(s) supplied with your phone). You can now place a fully-featured cordless handset anywhere AC power is available to connect the handset charger. Up to 2 handsets can be used for outside and/or intercom call.
REGISTER THE HANDSET If you purchase an extra handset, you need to register the handset to the base before use. Only one handset can be registered at a time. The handset ID for the supplied handset(s) was assigned at the factory, which has #1 or #2 in the display (#2 for models that have two handsets in packaging).
[ 57 ] To use this feature, you must enter the two handsets into the DirectLink mode first. To enter the DirectLink mode • See page 13 This feature allows you to monitor sounds in another room. To use this feature, place the handset or base in the desired room to monitor (act an remote mic), and place the other near listener (remote speaker).
[ 58 ] 4-WAY CONFERENCING INTERCOM/CALL TRANSFER FEATURE Fourth person, at either the handset or the base, may be added to the conference call. For example, to add a fourth party to an ongoing conference call at the base or another handset, press on the fourth party’s handset (or on the base).
[ 59 ] Call Transfer Feature From handset to handset or to the base 1) During a call, press /transfer/int’com on the handset. 2) Select a handset or the base to transfer the call within 10 seconds. (Refer to step 2 in the intercom section on page 58).
[ 60 ] The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.
[ 61 ] NOTE ON POWER SOURCES Battery replacement and handling When the operating time becomes short, even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year. Please contact your place of purchase or the Uniden Parts Department for a replacement battery.
[ 62 ] TROUBLESHOOTING If your phone is not performing to your expectations, please try these simple steps first. Symptom Suggestion The charge LED won’t illuminate • Make sure the AC adapter is plugged into the base or charger and wall when the handset is placed in outlet.
[ 63 ] Symptom Suggestion Severe noise interference. • Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. • Move to another location or turn off the source of interference.
[ 64 ] Symptom Suggestion Messages are incomplete. • The incoming messages may be too long. Remind callers to leave a brief message. • The memory may be full. Delete some or all of the saved messages. No sound on the base unit • Adjust the speaker volume on the base unit.
[ 65 ] INDEX 0 - 9 3-way conferencing ................... 27 4-way conferencing ................... 58 20 ring options .......................... 15 A Announce only feature .............. 47 Answering system Deleting a message ................ 50 Playing your messages .
[ 66 ] REMOTE OPERATION CARD CUT REMO TE OPERA TION CARD Remote access away fr om home 1. Call your phone number from a touch-tone phone. 2. During t he outgoing message, press # and enter your PIN code. The answering system announces the number of messages stored in memor y and the help guidance.
[ 67 ] CUT T as k Ke y Repeat a Message Playing incoming Messages Skipping a Message Deleting a Message Stop Operation Answering Sys tem On Memo Record/S top Greeting Message R ecord/Stop Answer Sys t.
[ 68 ] WARRANTY One Year Limited Warranty UNDIEN WDECT3355/WDECT3355+1/WDECT3355+2 CORDLESS PHONE Important: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited Warranty only available in original country of purchase.
©2007 Uniden Australia Pty Limited/Uniden New Zealand Limited Part Code UPZZ01459BZ(0) Printed in China.
Ein wichtiger Punkt beim Kauf des Geräts Uniden WDECT3355 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden WDECT3355 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden WDECT3355 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden WDECT3355 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden WDECT3355 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden WDECT3355 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden WDECT3355 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden WDECT3355. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden WDECT3355 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
