Benutzeranleitung / Produktwartung SS E15 des Produzenten Uniden
Zur Seite of 44
Series Owner's Manual OWNER'S MANU AL SS E1 5.
.
Welcome/Features 2 Controls and Functions 3 T erms Used in this Manual 4 Getting St arted Basics Emergency Dial Using the Speed Dial Memory Caller ID Features Additional Information Installing the Phone 5 A. Choose the Best Location 5 B. Connect the Base Unit and Charge the Handset 6 C.
Congratulations on your purchase of the Uniden cordless telephone. This cordless phone is designed and engineered to exacting standards for reliability , long life, and outst anding performance. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes.
Controls and Functions 1. Handset antenna 2. Audio boost switch 3. key (p. 16/ 14) 4. - key (p. 16/ 14) 5. Handset battery compartment 6. Handset visual ringer LED 7. Handset earpiece 8. LCD display 9. key (p. 27) 10. key (p. 16/ 23) 1 1. key (p. 22) 12.
24. DC in 9V jack 25. T elephone line jack 26. Visual ringer switch (p. 8) 27. Ringer tone button (p. 14) 28. Ringer volume adjuster (p. 14) 29. Ringer on/off switch (p. 14) 30. Base speaker 31. Base visual ringer LED 32. Base antenna 33. Charge/in use LED (p.
Inst alling the Phone Do the following step s: A. Choose the best location B. Connect the base unit and charge the handset C. Set the visual ringer brightness (optional) D.
B. Connect the Base Unit and Charge the Handset 1) Connect the AC adapter to the jack and to a standard 240V AC wall outlet. 2) Place the handset in the base unit. 3) Make sure that the LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging cont acts.
GETTING ST ARTED 5) Once the handset battery p ack is fully charged, connect the telephone line cord to the jack and to a telephone outlet. If your telephone outlet isn't modular , contact your telephone company for assist ance.
C. Set the V isual Ringer Brightness The switch allows you to set the brightness of the LED on the base. There are three options to choose from: high, low and off.
D. Mount the Base Unit on a W all St andard wall plate mounting This phone can be mounted on any standard wall plate. 1) Remove the wall mount adapter from the base and snap it into the notches on the bottom of the base. 2) Plug the AC adapter to the jack.
[10] • T ry to mount your phone within 1.5m of a working phone jack to avoid excessive cord lengths. • Make sure the wall material is cap able of supporting the weight of the base and handset. • Use #10 screws (minimum length of 35mm) with anchoring devices suit able for the wall material where the base unit will be placed.
Basic Setup There are four basic options that you will need to set up: AutoT alk, CIDCW (Caller ID on Call W aiting), Name T ag and Insert 0. Autotalk allows you to answer the phone simply by removing the handset from the base. Y ou do not have to press any keys.
2) Press the key to select . 3) Press the key to toggle and turn on Caller ID on Call W aiting. 4) Press the key and to complete the setting. The handset returns to st andby mode. The Name T ag feature works with the Caller Display number from Caller ID.
Setting the Insert 0 This feature adds '0' or '00' to the number , when you receive Caller ID messages. The default setting for New Zealand is On. The default setting for Australia is Off. 1) When the phone is in standby mode, press the key .
[14] Selecting the Ringer T one and V olume Base ringer on/off Base ringer tone Base ringer volume Handset ringer tone and volume The switch allows you to set the base ringer on or off. If you set the switch to of f, you never hear the base ringer tone.
Using Y our Phone Making and Receiving Calls Making a call Receiving a call Hanging up 1) Remove the handset from the base. 2) Press the key . 3) Listen for the dial tone. 4) Dial the number . OR 1) Remove the handset from the base. 2) Dial the number .
[16] Redialing the last dialed number Adjusting the Handset Earpiece V olume Audio boost 1) Remove the handset from the base. 2) Press the key . 3) Listen for the dial tone. 4) Press the key . OR 1) Remove the handset from the base. 2) Press the key .
BASICS T raveling Out-of-Range During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range limit s of the base unit, your call will terminate within 1 minute.
Selecting a Different Channel Find Handset If you encounter interference while using your phone, you can manually change the phone´s channel for clear operation. This function works only when the phone is in use. Press the key . appears on the display , indicating the phone is changing to another channel.
Y ou must subscribe to voice mail service from your telephone company in order to use this feature. The voice mail company will provide you with the access number . BASICS [19] Using Call W aiting V isual Message W aiting Indicator If you have Call W aiting service, you can receive calls while on the line.
Emergency Dial Emergency Dial is a one-touch speed dial key . S tore your most important or most frequently called number as your Emergency Dial number . Then, simply press the key , and your phone will automatically dial the number . 1) When the phone is in standby mode, press and hold the key .
Using the S peed Dial Memory The speed dial memory allows you to store up to 10 names and numbers in the handset. Y ou can dial these numbers with just a few key presses. The speed dial memory is not limited to phone numbers. Y ou can store any number (up to 20 digits) that you need to enter once your call connect s.
4) Enter a name according to the instructions below , then press the key . If no name is required, go to step 5. • The name can be up to 13 characters. • Use the and keys to move the cursor to the desired location. • Use the key to delete characters as needed.
[23] USING THE SPEED DIAL MEMOR Y 5) is displayed. The cursor flashes indicating that the display is ready for the number to be entered. 6) Use the keypad to enter the phone number; each number can be up to 20 digits. If you need the phone to pause during the dialing sequence, press the key to insert a two-second delay between the numbers.
7) Press the key . Y ou will hear a confirmation tone, and the following screen appears. Memory storage is complete. After about 2 seconds, the following screen displays all the speed dial memory entries. 8) Press the key to exit memory setup mode. The phone returns to standby .
[25] USING THE SPEED DIAL MEMOR Y 4) Press the key . Y ou hear a confirmation tone, and the number is stored in memory . The display returns to the Caller ID list. 1) Press the key . The handset displays your programmed speed dial number . 2) Enter the number ( - ), or press the or key to select the speed dial number you would like to dial.
Caller ID and CIDCW (Caller ID on Call W aiting) Y ou must subscribe to Caller ID service through your local telephone provider to use this feature. When the telephone rings, the Caller ID feature all.
! ! ! In Caller ID operation, if no key is pressed for more than 30 seconds, an error tone sounds and the telephone returns to standby mode. Each message can be up to 15 characters for the phone number and the name. The number of calls from the same Caller ID appears next to the received time.
Deleting Information from the Caller ID List Deleting a Caller ID message The cordless phone stores up to 30 messages (Caller ID names/numbers). If the phone receives the 31st message, the oldest one in the list is automatically deleted. Caller ID data can also be deleted manually .
Deleting all Caller ID names/numbers 1) With the phone in standby mode, press the key . 2) Press the key . 3) Press the key to select , and then press the key .
[30] Y ou cannot make a call from the Caller ID list if your cordless phone is connected to a private branch exchange (PBX). Making a Call from the Caller ID List Y ou can place a call from the Caller ID list. 1) Press the key . Select the phone number that you want to dial by pressing the or key .
Changing the Digit al Security Code T o protect you against misbilled calls which might result from your phone being activated by other equipment, the cordless phone provides AutoSecure (which electro.
[32] Note on Power Sources Low battery alert Battery replacement and handling When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power . If the phone is not in use, Low Battery appears on the LCD and none of the keys will operate.
[33] Inst alling a Replacement Battery Follow the steps below if you need to replace a battery . 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Remove the existing battery and unplug the connector from the jack.
[34] Maintenance T o maintain a good charge, it is important to clean the charging cont acts on both the handset and base once a month. Using water only , dampen a cloth to clean the charging contact s. Then, make sure to go back over the charging contact s with a dry cloth.
[35] T roubleshooting If your phone is not performing to your expectations, please try these simple step s first. If these steps do not solve your problem, visit our website for further information (www .uniden.com.au or www .uniden.co.nz). Symptom Suggestion The LED won't illuminate when the handset is placed in the cradle.
[36] The handset doesn't ring or receive a page. • The battery p ack may be weak. Charge the battery for 15- 20 hours. • The handset may be too far from the main base. • Place the main base away from appliances or metal object s. • Change the digital security code (see p age 31).
[37] ADDITIONAL INFORMA TION Liquid Damage Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps. Case Action If the handset or base is exposed to moisture or liquid, but it only affect s the exterior plastic housing.
[38] General Information Operating temperature: -10° to +50 C (+14 F to +122 F) AC Adapter part number: AAD--041S Input V oltage: 230-240V AC 50Hz Output V oltage: 9V DC 350 mA Battery part number: BT -905 Capacity: 600 mAh, 3.6V Recharge your phone on a regular basis by returning the handset to the base after each phone call.
[39] Index A B C D E, F , G H I, J, K, L M, N, O, P , Q R S T, U V ,W ,X,Y ,Z AC adapter information 38 Audio boost 16 Basic setup 1 1 Battery pack Replacement and handling 32 Beltclip installation 10.
Important: W arrantor: ELEMENT OF W ARRANTY : W ARRANTY DURA TION: P ARTS COVERED: ST A TEMENT OF REMEDY : PROCEDURE FOR OBT AINING PERFORMANCE OR WARRANTY : Evidence of original purchase is required for warranty service. Uniden Australia Pty Limited A.
[41].
THANK Y OU FOR B UYING A UNIDEN PR ODUCT . © 2005 Uniden Australia Pty Limited. Uniden New Zealand Lt d. Printed in China UPZZ01067ZZ(0).
Ein wichtiger Punkt beim Kauf des Geräts Uniden SS E15 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden SS E15 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden SS E15 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden SS E15 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden SS E15 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden SS E15 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden SS E15 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden SS E15. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden SS E15 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
