Benutzeranleitung / Produktwartung H/O200 des Produzenten Uniden
Zur Seite of 42
H/O 100 H/O200 Owner’s Manual.
PRECAUTIONS Before you read anything else, please observe the following: WARNING! — Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.
Controls and Indicators 6 7 9 10 11 8 1 2 3 4 5 talk talk batt chan ringer redial/pause mem flash volume 2 abc 4 ghi 7 pqrs 5 jkl 8 tuv 6 mno 9 wxyz 1 3 def tone # 0 oper H1 H2 H3 H4 H5 H6 H7 H8 H9 H10 H/O 200 Handset H/O 100 Handset H/O 100/200 Base 12 H/O 200 Handset H/O 100/200 Base H1.
TABLE OF CONTENTS Controls and Indicators ................ Back Cover Fold-out Important Safety Instructions ........................3 H/O 2 00 Battery Safety Precautions ......................5 Introduction ..................................6 Getting Started .
2.
Important Safety Instructions This product has been designed to assure your personal safety. Improper use can result in potential electrical shock or fire hazards. Carefully observe and comply with all warnings, cautions, and instructions placed on the product, or described in this operating guide.
Power Sources — This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. Power-Cord Protection — Do not allow anything to rest on the power cord.
H/O 2 0 0 Battery Safety Precautions To reduce the risk of fire or injury to persons by the battery, read and follow these instructions: Recommended Battery — Use only the appropriate type and size Battery Pack specified in this Operating Guide. Battery Disposal — Do not dispose of the Battery Pack in a fire.
Introduction Congratulation s o n th e purchas e o f you r ne w H/ O 100/20 0 Hom e Organizer. Th e Cordles s Hom e Organize r help s kee p trac k o f al l you r famil y function s with feature s lik .
Getting Started Unpack Your Phone Remove all the components from the box. Check the Contents Your H/O 100/200 phone should contain the following items.
Us e only th e Unide n AC Adapte r supplied wit h thi s phone. Preparin g th e Phon e fo r Use Connec t th e Power 1 . Plu g on e en d o f th e A C Adapte r int o th e D C 13 V I n jac k o n th e bac k o f your H/ O 100/20 0 phone 2 . Wra p th e powe r cor d aroun d th e strai n relie f notc h i n th e base.
3. Plug the other end of the AC Adapter into your wall outlet. Connecting the Phone Line 1. Plug one end of the telephone cord into the Line Jack on the back of your H/O 100/200 phone.
2 . Plu g th e othe r en d o f th e telephon e cor d int o you r wal l jack. Installin g Additiona l Equipment Yo u ca n instal l additiona l equipment , suc h a s a n answerin g machin e or messagin g system , b y connectin g i t t o the TEL Jack on the back of your H/ O 100/20 0 phone.
H/O 200 Final Touches Raise the Antenna Raise the antenna to the vertical position. Installing the Handset Battery Pack 1. Press in on the Battery Cover Release and slide the battery compartment cover down.
2. Align the plastic connector of the Nickel-Cadmium battery pack with its socket and plug it in. Note: The black lead will be on the right when the plug is properly aligned. 3. Place the battery pack inside the battery compartment, and slide the battery cover back on.
Charging the Handset Place the handset on the base to charge. The Charge message appears on the LCD. See page 17 for details. Note: The handset must be fully charged before the phone will operate properly. The battery included with your phone is not charged.
Cleaning the Battery Contacts To maintain a good charge, it is important to clean all battery contacts on the Handset and Base Unit about once a month. Use a pencil eraser or other contact cleaner. Do not use any liquids or solvents. H/O 100 Final Touches Attach the Handset 1.
Adjust the LCD Contrast 1. Lift the LCD Panel. 2. Move the contrast adjustment knob to change the LCD contrast. 3. The LCD is properly adjusted when you can comfortably read the screen. Initial Power Up When you first turn on the Home Organizer, a diagnostic is performed.
16.
Setup The LCD Screen The LCD Screen is where all of your information is displayed. A typical Home screen is shown below, and is broken down into several different sections. The Home screen can be reached at any time by pressing the Function Key under the h icon.
H/O 100/200 Functional Areas Your H/O 100/200 phone is divided into several functional areas. These are: ❏ The Arrow and Select Keys ❏ The Function Keys ❏ The Base Unit Keypad ❏ The Keyboard ❏ The LCD Screen Arrow and Select Keys These keys are used to move the cursor on the screen, or to select a feature.
Function Keys The Function Keys are associated with the icons on the LCD screen directly above them. To select an operation represented by an icon on the LCD screen, press the Function Key below the icon.
The Base Unit Keypad The base unit keypad is used to dial phone numbers (H/O 100) and when using the speaker option (H/O 200). The Keyboard Use the keyboard to type appointments, phone numbers, addresses and notes.
Setu p Screen 1 . Pres s th e Functio n Ke y under s . 2 . A typica l setu p scree n i s displayed. Note: The LCD display could look different depending on the software in your H/O 100/200 phone. Settin g u p th e Phone Thi s sectio n explain s ho w t o se t u p th e phon e feature s o f you r H/ O 100/200 phone .
Setting the Time Note: If you have Caller ID service from your local phone company, the time and date will be set automatically when you receive your first call. 1. Press the Function Key under s . 2. Press the Function Key under O . 3. Press the Function Key under M .
Setting the Ringer Level 1. From the Setup Phone Screen press B until the cursor is on Ringer Level. 2. Use the left or right arrow keys to toggle between off, low, and high. 3. Press B on the keyboard. 4. Press the Function Key under d to save the information.
Setting Up Permanent Notes 1. Press the Function Key under s . 2. Press the Function Key under o . 3. Use ; or :< or > to select the date. 4. Press l on the base. 5. Enter the note. 6. Press the Function Key under d . Permanent notes will be highlighted on the calendar.
Home The Home Screen A typical Calendar/Notepad screen is displayed below. Note: The LCD display could look different depending on the software version in your H/O 100/200 phone. Entering notes You can store up to seven lines of notes for each date on the calendar.
Modifying notes 1. Press ; , : , < ,o r > to move to the desired date on the calendar. 2. Press l . 3. Press ; , : , < ,o r > to move through your note and modify text. 4. Press the del key to backspace and erase text. 5. Press the return key.
Addres s Book Addres s Boo k Screen T o ente r th e Addres s Book , pres s th e Functio n Ke y under a . Yo u ca n ente ra maximu m o f 50 0 addresse s i n th e Addres s Book . Any addresse s yo u tr y t o sav e abov e tha t numbe r wil l b e lost. A typica l Addres s Boo k scree n i s displaye d below.
Modifying Addresses 1. Press the Function Key under a . 2. Press ; or : to highlight the desired call. —O R— Enter the first letter of the Name. 3. Press the Function Key under e . 4. Press B on the keyboard, or use < and > to move to the field you want to modify.
Entering New Addresses 1. Press the Function Key under a . 2. Press the function Key under N . 3. Press B on the keyboard, or use < and > to move to the field you want to modify. 4. Type in the changes. Press del on the keyboard to backspace over a mistake.
30.
Caller ID Caller ID Screen The Caller ID icon will blink when you have new calls. Note: You must subscribe to Caller ID service from your local phone company to use this feature. A typical Caller ID screen is displayed below. Note: The LCD display could look different depending on the software version in your H/O 100/200 phone.
Viewing Caller Information 1. Press the Function Key under c . 2. Press ; or : to highlight the desired call. 3. Press the Function Key under h to exit. Deleting Caller Information 1. Press the Function Key under c . 2. Press ; or : to highlight the desired call.
Usin g You r Phone Receivin g Calls 1 . Afte r th e secon d rin g Calle r I D informatio n i s displayed. To remove the window immediately, Press any key on the keyboard. The window closes automatically after 2 minutes. 2 . Pic k u p th e Handse t (H/ O 10 0 an d H/ O 200).
Storing Memory Numbers (H/O 200) Up to 10 numbers can be stored in the H/0 200 Handset for speed dialing when you are away from the base. Numbers cannot be stored in the Base unit. Note: These numbers will not be stored in the Address Book automatically.
4. While on call, enter the number from the Handset —O R— Enter the memory location number where the second number is stored. Redialing the last Number Called (H/O 200) 1. Press talk . 2. Press the redial/pause key on the Handset. 3. The last number you called is dialed.
Changing the Handset Ring Type and Ring Volume (H/O 200) There are 2 ring types and two ring volumes that can be selected while your H/O 200 is in the Standby mode. Be sure the talk/batt low LED is not lit on your H/O 200 Handset. 1. Press the volume/ringer key on the Handset to change between the 2 different rings and volumes.
Product Specifications General LCD Display: VGA-compatible with contrast adjustment. Keyboard: Full QWERTY keyboard. Operating Temperature: 10 ° to 40 ° C Storage Temperature: -40 ° to 100 ° C Hum.
One-Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one.
Covered under one or more of the following U.S. patents: 4,511,761 4,523,058 4,595,795 4,797,916 5,426,690 5,650,790 5,660,269 5,661,780 5,768,345 ©113098 Uniden America Corporation All Rights Reserv.
Ein wichtiger Punkt beim Kauf des Geräts Uniden H/O200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden H/O200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden H/O200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden H/O200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden H/O200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden H/O200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden H/O200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden H/O200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden H/O200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
