Benutzeranleitung / Produktwartung EXS 9910 des Produzenten Uniden
Zur Seite of 30
EXS 9910 5th 99.9.24 5:00 PM Page 1.
Thank you for choosing the Uniden EXS 9910 cordless telephone. This phone is designed for reliability, long life, and outstanding performance utilizing the latest in 900 MHz Spread Spectrum technology. Note: Some illustrations in this manual may differ fr om the actual unit for explanation purposes.
vol DIGITAL SPREAD SPECTRUM batt talk mute rdl/p mem abc def ghi mno pqrs tuv wxyz oper tone m1 m2 m3 m4 jkl 12 3 45 6 78 9 0# talk flash open backup battery page/find power status 900MHz DIGITAL SPREAD SPECTRAM 5 10 6 7 8 9 11 13 14 15 17 16 12 1 2 3 4 23 21 22 24 18 19 20 Controls and functions EXS 9910 5th 99.
25 26 27 1. Handset antenna 2. Headset jack cover 3. Handset battery compartment 4. Handset ring switch 5. Handset speaker 6. T alk/Batt LED 7. T alk key 8. V olume down key 9. Mute key 10. T one key 11. Handset microphone 12. V olume up key 13. Flash key 14.
Introduction / Features...............inside front cover Controls and Functions ..............inside front cover Getting Started Read this first ..........................................................3 Step 1: Checking the package contents ........
3 This cordless telephone must be set up before use. Follow these steps; Step 1 (page 4) Unpack and check the telephone and accessories. Step 2 (page 5 to 9) Next, choose the best location to set up the base unit.
4 Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department (see below).
5 Do the following steps. • Choose the best location • Connect the base unit • Choose the dialing mode Choose the best location Before choosing a location for your new phone, read the INST ALLA TION CONSIDERA TIONS included in the PRECAUTIONS AND IMPORT ANT SAFETY INSTRUCTIONS brochure.
6 Connect the base unit If you want to install the base unit on the wall, see page 8. Route the cord. T o AC outlet T o telephone outlet T o TEL LINE T o DC IN 9V AC adapter (supplied) T elephone line cord (supplied) 1 2 Place the power cord so it does not create a trip hazard, or where it could become chafed and create a fire or electrical hazard.
7 Use only the supplied AD-420 AC adapter . Do not use any other AC adapter . Connect the AC adapter to a continuous power supply. Place the base unit close to the AC outlet so that you can unplug the AC adapter easily. If your telephone outlet isn't modular , contact your telephone company for assistance.
8 Standard wall plate mounting This phone can be mounted on any standard telephone wall plate. 1 Snap the wall mount adapter into the notches on the base. 2 Plug the telephone line cord to the TEL LINE jack and the AC adapter to the DC IN 9V jack. 3 Plug the telephone line cord into the telephone outlet.
9 Direct wall plate mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • A void electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.
10 Installing the handset battery pack Charge the battery pack for more than 16 hours before you start using your phone. 1 Press in on the battery cover release and slide the cover down until it comes off. 2 Install the nickel-cadmium battery with the label facing down.
11 Battery use time (per charge) From fully charged • Four hours coutinuous use. • Seven days when the handset is in the standby mode. When the battery charge becomes low When the voltage of battery pack in the handset is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power .
12 T o prevent other parties from making unauthorized calls on your phone line, a digital code was added to the EXS 9910. Y our phone’s handset and base share this code, which is randomly set each time you place the handset on the base. Automatic digital code security EXS 9910 5th 99.
13 1 Press . The talk/batt LED lights. 2 Dial the phone number . 3 T o hang up, press or return the handset to the base. Other Operations T o Do this T o adjust the ear speaker volume Press or during the call. T o temporarily switch to tone dial Press .
14 Handset on the base 1 Phone rings. The talk/batt LED flashes. 2 Pick up the handset and begin speaking. 3 T o hang up, press or return the handset to the base. Handset of f the base 1 Phone rings. The talk/batt LED flashes. 2 Press or any key and begin speaking.
15 Ringer tone The phone has four types of ringer tone. In standby mode, press and - on the keypad. Ringer volume In standby mode, press for high and for low. T o turn the ringer off, set the ringer on/off switch to off . Handset earpiece volume The phone has four earpiece volume levels, Normal, Medium, High, and Loud.
16 Y ou can tur n off the handset microphone so that the person you are talking with cannot hear you. 1 Press during a telephone call. The talk/batt LED blinks. The other party will not be able to hear you although you can hear them. 2 T o cancel mute, press again.
17 T o locate the handset (while it’s off the base), press on the base. The handset beeps for 15 seconds. page/find open backup battery page/find power status DIGITAL SPREAD SPECTRAM 900MHz Using page feature If the handset was paged during a call, you can cancel it by pressing .
18 Y our EXS 9910 stores up to 24 numbers in the handset. 1 Press while in standby mode. The talk/batt LED flashes. 2 Dial the number you wish to store (up to 16 digits). 3 Press again. 4 Enter a two-digit number (01 - 20) or press one of the One-touch memory keys ( - ) to select the memory location where you wish to store the number .
19 Memory dialing 1 Press . The talk/batt LED lights. 2 Press . 3 Enter a two-digit number (01 - 20) to select the memory location you wish to dial. 4 T o hang up, press or return the handset to the base. One-touch memory dialing 1 Press one of the One-touch memory keys ( - ) you wish to dial.
20 1 Press in the standby mode. The talk/batt LED flashes. 2 Press again. 3 Enter the memory location number (01 - 20 or - ) you wish to delete. A confirmation beep indicates the number has been erased. mem Erasing a stored phone number mem m1 m4 EXS 9910 5th 99.
21 T o attach the beltclip Insert the beltclip into the holes on each side of the handset. Press down until it clicks. T o r emove the beltclip Pull both sides of the beltclip to release the tabs from the holes. Y our phone may be used with an optional headset.
22 Battery replacement and handling When the operating time becomes short, even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year . Please contact your place of purchase for a replacement battery.
23 If your phone is not performing to your expectations, please try these simple steps first. Symptom The status LED won't come on when the handset is placed in the base unit. The audio sounds weak and/or scratchy. Can't make or receive calls.
24 SPECIFICA TIONS General The EXS 9910 complies with FCC Parts 15 and 68. Frequency control: PLL Modulation: Frequency shift keying Operating temperature: 0 ° C to +50 ° C (+32 ° F to +122 ° F) Base unit Frequency: 904.2 MHz to 925.8 MHz (20 channel) Power requirements: 9V 350mA (from AC adapter) Size: 5-5/32 in.
25 A, B Battery pack Preparing and charging ..........................10 Replacement and handling ..........................22 Beltclip installation ...............21 C Connection..............................6 D Dialing mode .........................
26 EXS 9910 5th 99.9.24 5:01 PM Page 29.
EXS 9910 5th 99.9.24 5:01 PM Page 30.
Ein wichtiger Punkt beim Kauf des Geräts Uniden EXS 9910 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden EXS 9910 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden EXS 9910 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden EXS 9910 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden EXS 9910 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden EXS 9910 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden EXS 9910 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden EXS 9910. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden EXS 9910 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
