Benutzeranleitung / Produktwartung EXR2460 des Produzenten Uniden
Zur Seite of 33
.
CO N T E N T S OF Y OUR O WNER’S MANU AL CONTENTS Introduction ................................................... 1 • W elcome ............................................................ 1 • Featur es ..........................................
oduction WELCOME Congratulations on your pur chase of the Uniden EXR2460 cor dless telephone. This phone is designed for r eliability , long life, and outstanding performance utilizing the latest in 2.4 GHz Spr ead Spectrum technology . FEA TURES • 2.
INCLUDED IN Y OUR P A CKA GE • This Owner’s Manual • Precautions and Im portant Safety Instructions • Registration Car d 2 W all Mounting Screws TIP T o get the most fr om your phone, please read this owner’s manual thor oughly . Also be sure to complete and mail the product registration form.
Installing and Adjusting YourPhone DESK/T ABLETOP INSTALLATION 1) Plug the A C adapter cord into the 1 0 V DC in put jack on the back of the base. 2) Wrap the A C adapter cord around the strain r elief notch. 3) Plug the AC adapter into a standar d 1 20 V AC w all outlet.
7) Attach the desktop stand to the base. 8) Set the base on a desk or tabletop and place the handset into the base. Then, raise the antenna to a vertical position. W ALL INST ALL ATION ▼ Standard wall plate mounting This phone can be mounted on any standar d telephone wall plate.
3) Plug the A C adapter cord into the 1 0 V DC in put jack on the back of the base. 4 ) Put the A C adapter cord inside the molded wiring channel, then wrap it around the strain relief notch. Plug the A C adapter into a standard 1 20 V A C wall outlet.
7) On the base unit, pull the handset retainer out of the slot and rotate it clockwise 1 80°. 8) Flip the retainer from fr ont to back, then slide it back into the slot so that the lip of the retainer f aces up and the ov al is at the bottom of the retainer .
▼ Direct wall mounting If you don't hav e a standard w all plate, you can mount y our phone directly to the w all. Befor e doing this, consider the follo wing: • Select a location away fr om electrical cables, pipes, or other items behind the mounting location.
3) Rotate the mounting adapter 1 80° and snap it into place at the bottom of the base. 4) Plug the A C adapter cord into the 1 0 V DC in put jack on the back of the base. 5 ) Put the A C adapter cord inside the molded wiring channel, then wrap it around the strain relief notch.
7) Line up the mounting slots on the base with the mounting screws on the w all, then push in and down until the phone is firmly seated. 8) On the base unit, pull the handset retainer out of the slot and rotate it clockwise 1 80°.
INST ALLING THE HANDSET BA TTERY P A C K 1) Press in on the battery cover r elease and slide the cov er down until it comes off. 2) Install the nick el-cadmium batter y with the label facing do wn. 3) Slide the batter y cov er on until it snaps into place.
CHARGIN G THE BATTER Y P A CK ▼ Initial batter y charging Befor e plugging the phone line into your new phone f or the first time, fully charge the battery pack for 1 2-1 5 hours without interruption. 1) Place the handset on the base. 2) Mak e sure that status LED lights.
▼ Low batter y indicator When the batter y pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to sav e power . If the phone is not in use, Low Battery f lashes. If the phone is in use, Low Battery flashes and the handset beeps.
ADJUSTING THE HANDSET V OLUME CONTROLS ▼ Handset ringer volume When the phone is in standby mode, pressing the vo l ▲ or ▼ ke y o n the handset selects the handset ringer v olume. There are tw o ringer volume settings; high and lo w . T o select the high volume setting, press vo l ▲ .
INST ALLING THE BEL TCLIP ▼ T o attach the beltclip 1) Remo ve the slot co ver . 2) Insert the beltclip into the empty slot and press do wn until it clicks. ▼ T o remove the beltclip 1) Pull back on the release tab and pull the beltclip up. 2) Replace the slot co ver .
HEADSET INST ALL ATION Y our phone may be used with an optional headset, the U niden HS9 1 0. T o use this featur e, simply insert the headset plug into the headset jack.
Using YourNew Phone MAKING AND RECEIVIN G CALLS Handset On Base Handset Off Base T o answer a call 1) Pick up the handset. 2) If not in Autotalk Mode, press talk . 1) Press any k ey . 2) If not in Autotalk Mode, press talk . T o make a call 1) Pick up the handset.
STORING A PHONE NUMBER IN MEMOR Y 1) Remo ve the handset fr om the base. 2) Press and hold memory until the confirmation tone sounds. The following screen appears. 3) Use the : and ; keys or number k eypad to choose the memor y location where y ou would lik e to enter a number .
EDITING A PHONE NUMBER IN MEMOR Y F ollow these steps to edit a phone number that y ou have alr eady programmed into memory . 1) Remo ve the handset fr om the base. 2) Press and hold memory until the confirmation tone sounds. The display shows the Memory Store screen and an y saved numbers.
9) Press select. The handset beeps and displays a confirmation screen. For example, if y ou store a name and number into memor y location number one, then the handset shows Memory 1 Stored .
8) Press select . There is a confirmation tone, and the handset displays Memory 1 Deleted . 9) The display then returns to the Memory Store screen. Y ou may select another number to delete (return to step 3) or y ou may press memory to return to standby .
USING CALLER ID Y ou must subscribe to Caller ID from y our phone compan y in order to use this feature . ▼ Setting up Caller ID options There are thr ee Caller ID setup options available; they ar e Autotalk, CIDCW , and Ar ea Code. AutoT alk allows y ou to answer the phone without pressing the talk button.
▼ Screening your calls Caller ID allows y ou to review caller information bef ore y ou answer y our phone. After the f irst ring, the display shows the date, time, call count, name, and phone number of the caller . If your Caller ID service is number only , then the name does not appear on the second line.
▼ Calling a Caller ID number 1) Press call id , and the Caller ID summar y screen appears. The screen sho ws the number of new messages and total messages. 2) Select the number that you w ould like to dial. Press ; to scan f or war d through the messages and : to scan backw ards through the list.
▼ Deleting a Caller ID message T o delete a single Caller ID message, f ollow the steps belo w . 1) Press call id , and the Caller ID summar y screen appears. The screen sho ws the number of new messages and total messages. 2) Select the number that you w ould like to delete.
4) A confirmation tone sounds, and the follo wing screen appears. 5) Press call id to return to standby . USING REDIAL The redial k ey redials the last number dialed. The redialed number can be up to 32 digits long. T o call the last number dialed from the handset, press talk , then press redial .
USING THE P A GE FEATURE T o locate the handset (while it’s off the base), press page on the base. T o beep the handset for 5 seconds, press page on the base, and the handset displays paging. T o beep the handset for 60 seconds, press and hold page .
Troubleshooting QUICK REFERENCE CHART If your phone is not perf orming to your expectations, please tr y these simple steps bef ore calling U niden customer service. If you are still unable to resolv e the problem, call customer service at (800) 297- 1 023.
PROBLEM SUGGESTION The handset doesn’t ring or receiv e a page. • The Nick el-Cadmium batter y pack may be weak. Charg e the batter y on the base unit for 1 2-1 5 hours. • The handset may be too far aw ay from the base unit. • Place the base unit away fr om appliances or metal objects.
Specifications GENER AL The EXR2460 complies with FCC P arts 1 5 and 68. Fr equency control: PLL Modulation: Direct Sequence Spread Spectrum; DBPSK Operating temperatur e: 0° to 50° C (+32° F to +1 22° F) BASE Fr equency: 2400 to 2483.5 MHz (20 channels) Po wer requir ements: 1 0 V 500 mA (from A C adapter) Size: 5- 1/2 in.
AND FUN CTIONS CONTR OLS.
June1999 4,511,7614,523,058 4,595,795 4,797,916 5,381,460 5,426,690 5,434,9055,491,745 5,533,010 5,574,727 5,650,790 5,660,269 5,661,7805,663,981 5,671,248 5,717.
Ein wichtiger Punkt beim Kauf des Geräts Uniden EXR2460 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden EXR2460 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden EXR2460 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden EXR2460 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden EXR2460 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden EXR2460 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden EXR2460 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden EXR2460. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden EXR2460 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
