Benutzeranleitung / Produktwartung EXI 7926 des Produzenten Uniden
Zur Seite of 46
EXI 7926 H1 99.8.23 11:31 AM Page 1.
2 Introduction Thank you for choosing the Uniden EXI 7926 cordless telephone. This phone is designed to exacting standards that provide reliability , long life and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes.
3 Controls and functions abc def jkl ghi mno tuv pqrs oper wxyz 2 13 5 46 8 79 0 hold tone mem INTEGRATED CALLER ID line1 line2 conf chan redial/p sel/vol int'com up dn flash delete call id line .
4 VOLUME 30 33 35 36 37 38 34 31 32 39 40 41 42 43 44 1. Handset antenna 2. Headset jack 3. Handset battery compartment 4. Handset speaker 5. LCD display 6. Line 1 key 7. Cursor down/ Character select/Conference key 8. T one/Backward key 9. Caller ID/Hold key 10.
5 T able of contents Getting Started Read this first ...................................................................................... 6 Step 1: Checking the package contents ............................................... 7 Step 2: Setting up the base unit .
6 Read this first This cordless telephone must be set up before use. Follow these steps; Step 1 (page 7) Unpack the telephone and accessories. Step 2 (page 8 to 10) Next, choose the best location to set up the base unit. Step 3 (page 11 to 12) Then, insert the battery pack into the handset.
7 Step 1 Checking the package contents Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department (see below).
8 Step 2 Setting up the base unit Do the following steps. • Choose the best location • Connect the base unit • Choose the dialing mode Choose the best location Before choosing a location for your new phone, read the INST ALLA TION CONSIDERA- TIONS included in the PRECAUTIONS AND IMPORT ANT SAFETY INSTRUCTIONS brochure.
9 Step 2 (continued) Connect the base unit If you want to install the base unit on the wall, see page 39. 1 Connect the telephone line cord to the TEL LINE jack and to a telephone outlet. 2 Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.
10 Step 2 (continued) Notes • Use only the supplied AD-420 AC adapter . Do not use any other AC adapter . • Connect the AC adapter to a continuous power supply . • Place the base unit close to the AC outlet so that you can unplug the AC adapter easily .
11 Step 3 Preparing the battery pack Charge the battery pack for more than 12-15 hours before you start using your phone. 1 Press and slide the battery compart- ment cover toward the bottom of the unit. 2 Connect the battery pack connector . The plug will fit only one way .
12 Step 3 (continued) Battery use time (per charge) From fully charged. • Seven hours continuous use. • Fourteen days when the handset is in the standby mode. When the battery charge becomes low When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power .
13 Step 4 Setting up Caller ID options There are three Caller ID options available; they are AutoT alk, CIDCW, and Area Code. AutoT alk allows you to answer the phone without pressing or . If the phone rings when AutoT alk is on, simply remove the handset from the base and the phone automatically answers the call.
14 Step 4 (continued) Entering your area code Y ou may wish to enter your local area code before you use this phone for the first time, or move to new area code, you should enter your area code. This is necessary that your phone can distinguish local or long distance calls to properly dial from the Caller ID message list.
15 Basics Basic 2-line operation Handset On Base Handset Off Base Base Only Auto T alk off 1. Pick up the handset. 2. Press or . Auto T alk on Pick up the handset. line 1 line 2 Press or . line 1 line 2 Press or . line 1 line 2 T o answer a call T o make a call 1.
16 1 The handset rings and the following screen appears: 2 Press to answer your call. 3 When you finish the call, press on the handset, or return the handset to the base. 1 The base rings. The corresponding line 1 LED on the base flashes. 2 Press the button and speak.
17 1 Press . 2 Dial the number on the keypad, or , use one of the memory features. (See Using memory dialing, page 32.) 3 When you finish the call, press to hang up. Basics (continued) Making a call from the base line 1 line 2 conference mute hold status line 1 line 1 Off-hook dialing 1 Pick up the handset.
18 The flash function on the base and handset are independent of each other . If you have Call Waiting service and a call waiting tone sounds, press (or on the handset) to accept the call. After a short pause you will hear the new caller . T o return to the original caller , press (or on the handset) again.
19 Use either the keypad on the handset or the keypad on the base. 1 T o place line 1 on hold at the base, press . The line 1 LED turns from green to red. 2 T o place line 1 on hold at the handset, press . The following screen appears: 3 T o pick up the call that is holding, press on the base or handset.
20 T o locate the handset when it is off the base, press on the base. The handset beeps for 60 seconds. The following screen appears: Press on the handset to connect to the base.
21 The handset and the base can be used on separate telephone lines at the same time. For example, if the handset is on a call with line 1 , you can make, or receive calls at the base on line 2 . The line 1 LED on the base flashes green to indicate line 1 is In Use at the handset.
22 This feature lets you add a third party to your conversation from either the handset or the base. For example, to add a party to the current call on line 1 at the base: 1 Press to place the caller on hold. The line 1 LED turns from green to red. 2 Press .
23 A fourth person, at either the handset or the base, may be added to conference call. For example, to add a fourth party at the handset to an ongoing conference call at the base: 1 Press . The line 1 and line 2 LEDs turn red. 2 Press on the base to contact the handset.
24 1 Press on the base. The handset beeps. (If no answer , press on the base again to disconnect.) 2 Press on the handset. Speak into the mouthpiece to answer the page. 3 T o turn off the intercom, press on the base or on the handset. Paging from the handset to base 1 Press on the handset.
25 1 T o transfer a call from the base or the handset, press then . 2 Answer by pressing . On the base the status LED flashes and line 1 LED turns red. The following screen appears: Y ou may then announce the call with the intercom. 3 T o speak to the caller , press or .
26 Memory features Y our EXI 7926 stores up to 30 name/numbers in the handset plus 10 numbers in the base. Memory locations are shared by both lines. On the handset 1 Pick up the handset from the base.
26 On the base 1 Press . The status LED blinks. 2 Dial the number you wish to store. 3 Press . Enter the memory location number (0-9) on the keypad. The status LED goes out. A confirmation beep indicates the number is stored. continued from previous page 7 Enter the phone number with the number keypad.
28 T o edit a number you have stored in the handset: 1 Pick up the handset from the base. 2 Press and hold for two seconds. The display shows the “ Memory Store ” screen and any saved name/numbers. 3 Use the and keys, or number keypad, to select the memory location you would like to edit.
29 Notes • Whenever you are using a menu screen, you must press a key within 20 seconds or the phone will return to standby . Y ou may also press to exit a memory menu at any time. • If you select “ Go Back ” at any time, no changes are made and the handset shows the “ Memory Store ” screen.
30 After erasing a number , you may add a new address to memory . From the handset 1 Pick up the handset from the base. 2 Press and hold for two seconds. The handset shows the “ Memory Store ” screen with saved name/numbers displayed. 3 Use the and keys, or number keypad, to select the memory location you would like to delete.
31 continued from previous page 8 Press . There is a confirmation tone, and the following screen appears: 9 The display then returns to the “ Memory Store ” screen. Y ou may select another number to delete (return to step 3) or you may press to return to standby .
32 Follow the steps below to dial a number using a programmed memory location: From the handset 1 Press . The handset displays your programmed memory locations. 2 Use the and keys to select the memory location you would like to dial. The following screen appears: 3 Press .
33 Caller ID features Using Caller ID Y ou must subscribe to Caller ID from your phone company to use this feature. Screening your calls Caller ID allows you to review caller information before answering your phone. At the second ring, the display shows the date, time, call count, name and phone number of the caller .
34 continued from previous page 6 Press to return to standby . Calling a Caller ID name/number 1 Press . The Caller ID summary screen shows the number of new callers and total number of calls. 2 Use or to select “ Line 1 ” or “ Line 2 ” caller ID.
35 Storing a Caller ID number in a memory location 1 Press . The Caller ID summary screen shows the number of new callers and total number of calls. 2 Use or to select “ Line 1 ” or “ Line 2 ” caller ID. 3 Press to display the caller ID message.
36 Deleting a Caller ID message T o delete a single Caller ID message, follow the steps below . 1 Press . The Caller ID summary screen shows the number of new callers and total number of calls. 2 Use or to select “ Line 1 ” or “ Line 2 ” caller ID.
37 Deleting all Caller ID name/numbers T o delete all of your Caller ID messages, follow the steps below . 1 Press . The Caller ID summary screen shows the number of new callers and total number of calls. 2 Use or to select “ Line 1 ”. 3 Press to delete name/numbers on line 1 .
38 Additional information Changing the digital security code The digital security code is an identification code used to connect the handset and the base unit. Normally , setting the code is not necessary . The first time you charge your handset, the security code is automatically set.
39 Additional information Mounting the base unit on a wall Standard wall plate mounting This phone can be mounted on any standard telephone wall plate. 1 Snap the wall mount adapter into the notches on the base. 2 Plug the telephone line cord to the TEL LINE jack and the AC adapter to the DC IN 9V jack.
40 Additional information Direct wall plate mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.
41 Additional information Installing the beltclip T o attach the beltclip Insert the beltclip into the holes on each side of the handset. Press down until it clicks. T o remove the beltclip Pull both sides of the beltclip to release the tabs from the holes.
42 Additional information Note on power sources Battery replacement and handling When the operating time becomes short, even after a battery is recharged, please replace the battery . With normal usage, your battery should last about one year . Please contact your place of purchase for a replacement battery .
43 Additional information T roubleshooting If your phone is not performing to your expectations, please try these simple steps before calling Uniden Customer Service at (800) 297-1023 . Symptom The status light won't come on when the handset is placed in the base unit.
Additional information Specifications General The EXI-7926 complies with FCC Parts 15 and 68. Frequency control: PLL Frequency shift keying: FSK Operating temperature: 0 ° C to +50 ° C (+32 ° F to +122 ° F) Base unit RX frequency: 902.102465 MHz to 904.
45 Additional information Index 0 - 9 2-Line features 2-Line operation .............................21 3-way conferencing........................22 4-way conferencing........................23 T ransferring call ..............................25 Using the speakerphone .
EXI 7926 H1 99.8.23 11:33 AM Page 46.
Ein wichtiger Punkt beim Kauf des Geräts Uniden EXI 7926 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden EXI 7926 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden EXI 7926 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden EXI 7926 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden EXI 7926 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden EXI 7926 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden EXI 7926 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden EXI 7926. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden EXI 7926 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
