Benutzeranleitung / Produktwartung EXA 8955 des Produzenten Uniden
Zur Seite of 46
EXA 8955 4th 99.9.24 5:44 PM Page 1.
Thank you for choosing the Uniden EXA 8955 cordless telephone. This phone is designed to exacting standards that provide reliability, long life and outstanding performance. Note: Some illustrations in this manual may differ fr om the actual unit for explanation purposes.
talk flash int'c mem mute abc def jkl ghi mno tuv pqrs oper tone wxyz 2 13 5 46 8 79 0 redial pause ringer chan extended range vol RING TIME REC TIME 2/4/TS ANN/4/1 DIGIT AL 900MHz speaker page/i.
RING TIME REC TIME 2/4/TS ANN/4/1 38 44 45 46 47 42 43 41 48 49 39 40 50 51 52 53 1. Handset antenna 2. Headset jack cover 3. Handset battery compartment 4. Handset ring switch 5. Handset speaker 6. T alk/Batt LED 7. T alk key 8. V olume down key 9. Mute key 10.
Introduction / Features...............inside front cover Controls and Functions ..............inside front cover Getting Started Read this first ..........................................................3 Step 1: Checking the package contents ........
3 This cordless telephone must be set up before use. Follow these steps; Step 1 (page 4) Unpack the telephone and accessories. Step 2 (page 5 to 9) Next, choose the best location to set up the base unit. Base unit Step 3 (page 10 to11) Then, insert the battery pack into the handset.
4 Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department (see below).
5 Do the following steps. • Choose the best location • Connect the base unit • Choose the dialing mode Choose the best location Before choosing a location for your new phone, read the INST ALLA TION CONSIDERA TIONS included in the PRECAUTIONS AND IMPORT ANT SAFETY INSTRUCTIONS brochure.
6 Connect the base unit If you want to install the base unit on the wall, see page 8. T o AC outlet T o telephone outlet T o TEL LINE T o DC IN 9V AC adapter (supplied) T elephone line cord (supplied) 1 2 Route the cord. Place the power cord so it does not create a trip hazard, or where it could become chafed and create a fire or electrical hazard.
7 Use only the supplied AD-420 AC adapter . Do not use any other AC adapter . Connect the AC adapter to a continuous power supply. Place the base unit close to the AC outlet so that you can unplug the AC adapter easily. If your telephone outlet isn't modular , contact your telephone company for assistance.
8 Standard wall plate mounting This phone can be mounted on any standard telephone wall plate. 1 Snap the wall mount adapter into the notches on the base. 2 Plug the telephone line cord to the TEL LINE jack and the AC adapter to the DC IN 9V jack. 3 Plug the telephone line cord into the telephone outlet.
9 Direct wall plate mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • A void electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.
10 Charge the battery pack for more than 12-15 hours before you start using your phone. 1 Remove the battery cover . 2 Connect the battery pack connector with the correct polarity (black and red wires), then insert the battery pack into the battery compartment.
11 Battery use time (per charge) From fully charged • Seven hours coutinuous use. • Seven days when the handset is in the standby mode. When the battery charge becomes low When the voltage of battery pack in the handset is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power .
12 From the handset 1 Press . The talk LED blinks. 2 Dial the phone number . 3 T o hang up, press or return the handset to the base. The phone number can be up to 32 digits. Other Operations T o Do this T o improve reception Press on the handset. T o adjust the ear speaker volume Press or during the call.
13 Handset on the base 1 Phone rings. The talk LED flashes. 2 Pick up the handset and begin speaking. 3 Press or return the handset to the base to finish the call. Handset of f the base 1 Phone rings. The talk LED flashes. 2 Press and begin speaking. 3 T o hang up, press or return the handset to the base.
14 Handset ringer tone In the standby mode, press . Each time is pressed, the ringer tone setting changes and the selected ringer tone sounds for 2 seconds. Handset ringer switch This switch turns the handset ringer on or off. Handset ear speaker volume The phone has four ear speaker volume levels, Normal, Medium, High, and Loud.
15 From the handset The last phone number entered can be quickly redialed. 1 Press . The talk LED blinks. 2 Press . 3 Press or place the handset on the base to hang up. If the recently dialed number exceeds 32 digits, only the first 32 digits are retained for redialing.
16 Y ou can cut of f the sound from the base or the handset microphone. When speaking on the handset 1 Press during a telephone call. The sound from the microphone is cut off. 2 T o cancel mute, press or . When the phone is ringing Press when the phone is ringing.
17 Y our EXA 8955 stores up to 10 numbers in handset plus 10 numbers in the base. From the handeset 1 Press while in standby mode. The talk LED flashes. 2 Dial the number you wish to store (up to 20 digits) 3 Press again. 4 Press - on the keypad to select the memory location where you wish to store the number .
18 From the handset 1 Press . The talk LED blinks. 2 Press . 3 Select the memory location ( - ) you wish to dial. 4 Press or return the handset to the base to finish the call. From the base 1 Press . The speaker LED blinks. 2 Press . 3 Press the number keypad ( - ) to select the memory location you wish to dial.
19 From the handset 1 Press in the standby mode. The talk LED flashes. 2 Press again. 3 Enter the memory location number ( - ) on the keypad you wish to delete. A confirmation beep indicates the number has been erased. mem 1 Press . 2 Press again. 3 Press - on the keypad to select the memory location you wish to store the number .
20 The Uniden EXA 8955 permits 3-way conversations between the handset, base and outside line. When speaking on the handset 1 Press on the base to join the 3-way conversation. 2 Press on the base to hang up. The handset will still be connected to the outline call.
21 Intercom fr om the base to handset 1 Press on the base. The handset beeps. 2 Press or on the handset. Speak into the mouthpiece to answer the base. 3 T o turn off the intercom, press on the handset or on the base. page/int'com int'c talk speaker Intercom fr om the handset to base 1 Press on the handset.
22 T o transfer fr om the handset to the base 1 Press on the handset while speaking on the handset. The line will be placed on hold, and the intercom tone will be sounded on the base. 2 Press or on the base. The intercom mode is activated and you may speak to the person at the base.
23 The EXA8955 has a built-in answering system that answers and records incoming calls. Y ou can also use your answering system to record a conversation, leave a voice memo message for others who use the phone, or to announce a special message to callers when you're away from your phone.
24 4 Press or until you hear the correct time setting. Numbers 1 through 59 display on the base as each minute is announced. Press again to select the correct time. 5 The LED displays an A or P . Press or until you hear the correct AM/PM setting. 6 Press again to end the time/day setting.
25 1 Press and hold until you hear a long tone. Start recording your message immediately after you hear the long tone end. 2 When you are finished recording your message, press or . A long tone sounds and your message plays back on the phone. Preset Message The following message is prerecorded: "Hello, no one is available to take your call.
26 Selecting the message recor d time Y ou can set your answering system to record messages up to one or four minutes long. One minute option: move the REC TIME switch to 1 .
27 Setting ring time switch The ring time /toll saver switch allows you to set the number of rings the caller hears before the answering system plays your outgoing message.
28 Playing your message The base LED shows the number of total messages on the display. If the display is blinking, then there are new messages waiting for you. The EXA 8955 is designed to play your new messages first. After you play your new messages you can then play your old messages.
29 Repeating a message 1 Press to review your message. The number of stored messages is announces. 2 After a message has played for a few seconds, press to repeat the message. 3 Press at any time to stop reviewing messages and return to standby. The message counter LED shows the total number of messages still on the system.
30 Deleting a message Deleting individual message 1 Press to review your message. 2 If you decide to delete a message, press anytime during the message. The system beeps and immediately goes to the next message. 3 After you have played all of your messages, a long tone sounds on the base speaker .
31 Recording a conversation Y ou can record up to 10 minutes of conversation while you are making your call from the handset. 1 During the conversation from the handset. Press and hold on the base. The unit begins recording and the LED blinks. A beep that can be heard by both parties sounds every 15 seconds.
32 Remote access away from home Y ou can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, even to record a new outgoing message, and to monitor sounds in the room.
33 Remote room monitor Y ou can call your answering system from any touch-tone phone and monitor sounds in the room where your base is installed. 1 Call your telephone number . 2 While the answering machine is activated, press # and your PIN code. 3 The answering system begins announcing the time and day.
34 The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. The first time you charge your handset, the security code is automatically set.
35 T o attach the beltclip Insert the beltclip into the holes on each side of the handset. Press down until it clicks. T o r emove the beltclip Pull both sides of the beltclip to release the tabs from the holes. Y our phone may be used with an optional headset.
36 Battery replacement and handling When the operating time becomes short, even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year . Please contact your place of purchase for a replacement battery.
37 If your phone is not performing to your expectations, please try these simple steps first. Symptom The status light won't come on when the handset is placed in the base unit. The audio sounds weak and/or scratchy. Can't make or receive calls.
38 Symptom The answering system does not work. Messages are incomplete. After a power failure, the outgoing message is deleted. No sounds on the base unit speaker during call monitoring or message playback. Cannot access remote call-in features from another touch-tone phone.
39 General The EXA 8955 complies with FCC Parts 15 and 68. Frequency control: PLL Modulation: Frequency shift keying Operating temperature: 0 ° C to +50 ° C (+32 ° F to +122 ° F) Base unit RX frequency: 902.119 MHz to 905.016 MHz (30 channel) TX frequency: 924.
40 0 - 9 3-way conferencing ..............20 A Answering device Features ...........................23 Setting up ........................24 Using ...............................28 B Base ringer switch ................14 Battery pack Preparing and charging .
41 EXA 8955 4th 99.9.24 5:45 PM Page 44.
42 EXA 8955 4th 99.9.24 5:45 PM Page 45.
EXA 8955 4th 99.9.24 5:45 PM Page 46.
Ein wichtiger Punkt beim Kauf des Geräts Uniden EXA 8955 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden EXA 8955 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden EXA 8955 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden EXA 8955 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden EXA 8955 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden EXA 8955 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden EXA 8955 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden EXA 8955. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden EXA 8955 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
