Benutzeranleitung / Produktwartung DECT1480 des Produzenten Uniden
Zur Seite of 28
DECT1480 base with answering system and cordless handset Battery cover Accessory handset and charger If you purchased model number: You should have: DECT1480-2 1 of each DECT1480-3 2 of each DECT1480-.
2 When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: This unit is NOT waterproof.
3 Do not place the handset in any charging cradle without the battery installed and the battery cover securely in place. .
4 them. Connect the Telephone Cord Use the telephone cord to connect the TE L L INE jack on the base to a standard telephone wall jack.
5 Parts of the handset Microphone T welve- key dial pad ST A TUS Display Charging contacts Earpiece UP PHONEBOOK / LEFT SPEAKER.
6 Base keys/LEDs and how they work What it does Up ( + ) In standby: increase the ringer volume. While a messag e is p laying: increa se the speake r volum e. - - down ( – ) In standby: decrease the ringer volume. Whi le a me ssa ge i s p lay ing: de cre ase the spe aker v olu me.
7 What it does End During a call: hang up. In the menu or any list: exit and go to standby. - - mEnU/sElECT In standby: open the menu. In the menu or any list: select the highlighted item. - - Up ( ) In standby: increase the ringer volume.
8 Icon What it means The ringer is turned off and will not ring for new calls. You have a voice message waiting. Privacy Mode is on: no other handset can join the call. The speakerphone is on. The microphone is muted; the caller can't hear you. T-coil mode is on (see page 21).
9 AutoTalk Have this handset answer a call when you pick it up from the cradle (without pressing any buttons). Any Key Answer Have this handset answer a call when you press any key on the 12-key dialpad. Banner Change the name used on the handset's display.
10 To switch to all capital letters, press * . The phone defaults to all capital letters first (e. g. ABCabc2) until you enter a blank space or press * again.
11 You can also set the ringer volume separately: when the phone is in standby, press Up to increase the ringer volume and down to decrease. If you turn the ringer volume all the way down, the ringer turns off.
12 Store Into Pb Add the number to the phonebook. The handset prompts you to edit the name and number. Delete All (CID list only) Erase all numbers from the list. Using Call Waing Call Waiting, a service available from your telephone provider, lets you receive calls while you are on another call.
13 If you need the phone to pause before sending the next set of digits, press REdial/paUsE to insert a 2-second pause. The pause shows as a P in the display. You can insert as many pauses as you need, but each pause counts as one of your 20 digits. Phonebook Entry Opons With the phone in standby, open the phonebook and find the entry you want.
14 To join the call, just press Talk/Flash or spEakER . To leave the conference call, hang up normally; the other handset remains connected to the call. Privacy Mode To prevent other handsets from joining a call: Start your call as usual, then press mEnU/sElECT .
15 Call Transfer To... transfer a call Press ClEaR/inTERCom to put the call on hold. Select the handset you want to page (select All to page all handsets at the same time). When another handset accepts the call, you'll be disconnected (press Talk/Flash to rejoin the call).
16 Record Time Set the amount of time ( 1 or 4 minutes) callers have to leave a message. Choose Announce Only if you don't want the system to let callers to leave a message. Message Alert Have the system beep every 15 seconds when you have a new message; the beeping stops when you listen to all your new messages.
17 If you take no action for 30 seconds, the phone returns to standby. Only one handset can access the system at a time. Your personal outgoing message or greeting can be between 3 seconds and 30 seconds long.
18 To... play new messages Press play/sTop. Press mEssagEs/mUTE .
19 To... answer the call NA Press Talk/Flash . mute the call screen without answering* Press play/sTop . Press End or return the handset to the cradle. * If you mute the call screen, the system connues taking the message: it just stops playing through the speaker.
20 up and return to standby.
21 If… Try… The system won't record messages. Making sure the Record Time is not set to Announce Only . Deleting messages (memory may be full). - - A handset can't access the answering system. Seeing if ano ther h andset is usin g the s ystem.
22 oise or Stac on the Line oise or Stac on the Line Interference is the most common cause of noise or static on a cordless phone. Here are some common sources of interference: electrical app.
23 Plug the DSL filter into the telephone wall jack and plug your phone’s base into the filter. Make a test call to make sure the noise is gone. Liquid Damage Moisture and liquid can damage your cordless phone. If the exterior housing of the handset or base is exposed to moisture or liquid, wipe off the liquid, and use as normal.
days of standby me. For best results, return the handset to the cradle aer each call to keep it fully charged. When the baery gets too low, the handset shows a low baery alert.
An appl ica ble Uni ver sal Ser vic e Or der Cod es ( USO C) cer ca on for th e ja cks use d in th is equi pme nt i s prov ide d (i. e., RJ1 1C) in the pa ckag ing wit h each pie ce of a ppr oved te rmi nal equ ipme nt.
An y ch an ges o r mo di c ao ns t o th is pr od uc t not e xp re ssl y ap pr ov ed by t he ma nu fa ct ure r or o th er p ar ty re sp on si bl e fo r co mp lia nc e co ul d voi d yo ur a ut ho ri ty to o pe ra te th is p ro du ct.
as these might not comply with FCC RF exposure guidelines. Terminal equipment NOTICE: This equipment meets the applicable Industry Canada Terminal Industry Canada Terminal Equipment Technical Specicaons.
either, at its opon, repair or replace the defecve unit and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representaves in connecon with the performance of this warranty.
Ein wichtiger Punkt beim Kauf des Geräts Uniden DECT1480 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden DECT1480 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden DECT1480 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden DECT1480 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden DECT1480 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden DECT1480 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden DECT1480 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden DECT1480. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden DECT1480 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
