Benutzeranleitung / Produktwartung 6035 + 1 des Produzenten Uniden
Zur Seite of 60
DECT 6035 DECT 6035+1 Series DECT6035, 6035+1 OM.indb i DECT6035, 6035+1 OM.indb i 8/8/07 3:25:37 PM 8/8/07 3:25:37 PM.
1 T able of Contents Welcome ....................................................................... 4 T erminology Used in this Manual ............................. 5 Manual Conventions ................................................ 5 Product Overview .
2 Switching to the Handset Speakerphone During a Call .................................................... 29 Using Caller ID, Call W aiting, and Redial Lists ....... 30 Using the Caller ID List ......................................... 30 Making a Call from a Caller ID Record .
3 Battery Life ............................................................. 47 Power Failures ....................................................... 47 T roubleshooting ........................................................ 48 Resetting the Handset .
4 W elcome Thank you for purchasing a Uniden Multi-Handset phone. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit.
5 T erminology Used in this Manual Standby The handset is not in use. If it is off the cradle, no line has been activated. No dial tone is present. CID Caller ID is available from your T elephone provider and is offered to users on a subscription basis.
6 Product Overview Features 1.8GHz DECT6.0 Expandable System • Expands up to 6 Handsets • Integrated Digital Answering System • Caller ID/Call W aiting • Store 30 Caller ID Numbers • Advance.
7 Parts of the Phone The following illustrations show you all of the different parts of your phone. Handset 1 2 3 5 6 7 8 9 10 11 12 15 19 20 21 16 18 17 13 4 14 22 Headset jack cover 1. Belt clip hole 2. Speakerphone speaker and ringer 3. Handset battery compartment 4.
8 PREMIUM DECT Interference Free Communication 23 26 24 27 28 29 30 31 32 33 34 35 25 36 37 Base charging contacts 23. charge LED 24. Base microphone 25. Base speaker 26. [volume +/-] 27. keys message counter 28. LED [greet] 29. key (record/select greeting) [ 30.
9 Using the Interface Reading the Display The handset display uses icons to tell you the status of your phone. The table below lists the icons and what they mean. Icon Status Description Standby/T alk The battery icon indicates the handset battery status: full, medium, low , and empty .
10 Using the Four-way Function Key Y our handset has a four-way function key that allows you to move the cursor or pointer on the display and access the most commonly used features at the touch of a button. By moving this key to the left, you open the phonebook.
11 Entering T ext from Y our Handset Y ou can use the number keypad on your handset to enter text by referring to the letters printed on each number key . When you press the number key in a text entry fi eld, the phone displays the fi rst letter printed on the number key .
12 Installing the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: The location should be close • to both a phone jack and a continuous power outlet (one which is not connected to a switch).
13 Installing the Battery Use only the Uniden BT -652 rechargeable battery pack supplied with your cordless telephone. Follow the steps below to install the handset battery . Press in on the handset battery case cover (use the fi nger 1) indention for a better grip) and slide the cover downward to remove.
14 Installing the Belt Clip Line up the holes on each side of the handset. T o attach the belt clip, insert into the holes on each side of the handset. Press down until it clicks. T o remove the belt clip , pull either side of the belt clip to release the tabs from the holes.
15 Connecting to the Phone Line Once the battery pack is fully charged, route the telephone 1) cord through the “LOOP” of base’s back as shown, and connect the telephone cord to the TEL LINE jack. Connect the telephone cord to a telephone wall jack.
16 W all Mounting the Base This phone can be mounted on any standard wall plate. Snap the wall mount adapter into the notches on the base’s back. 1) Plug the AC adapter into the DC IN 9V jack. 2) Plug the AC adapter into a standard 240V AC wall outlet.
17 Basic Setup Activating Personal Ring Y ou can assign special ringer tones to anyone in your phonebook. When your phone gets a call, it looks up the Caller ID information in your phonebook. If you’ve assigned a personal ringer to that number , the phone uses it so you know who is calling.
18 Name T ag Name T agging works with the caller display number from Caller ID. Y ou will need to subscribe to the Caller ID feature with your phone company for Name T agging to work. When the phone rings, the received caller display number is compared to numbers stored in the phonebook.
19 Expanding Y our Phone Adding Accessory Handsets Y our phone supports a total of six cordless handsets. Y ou can now place a fully-featured cordless handset anywhere AC power is available to connect the handset charger . All the handsets ring when a call is received.
20 Registering DECT 6005 Accessory Handsets If you purchase an accessory handset, you need to register the handset before use. Handset(s) supplied in the box with the base are pre-registered at the factory . When charged, pre-registered handsets display a handset ID number .
21 Using Multiple Bases DECT 6005 handsets and the handsets supplied with your phone can be registered to a total of four dif ferent DECT6015 or DECT6035 bases.
22 When the base is found, the handset will return to standby . If the base is not found, “SEARCHING” continues 4) to appear . Y ou can repeat the procedure listed above to return back to the original connection or to fi nd the different base. Notes: • Y ou cannot change bases during a call.
23 Enter the number for this entry (EDIT NUMBER). 4) Once you have stored a name, EDIT NUMBER appears next. Use the number keypad to enter the phone number; the phone number can contain up to twenty digits.
24 Editing an Existing Phonebook Entry When the phone is in standby , press 1) [ ] to open the phonebook. Find the entry you want to edit and press 2) [Menu/Select] .
25 T o delete all phonebook entries: When the phone is in standby , press 1) [ ] . Press 2) [Menu/Select] , and then select DELETE ALL. DELETE ALL? appears in the display . Move the cursor to select YES. 3) Press 4) [Menu/Select] . Y ou will hear a con fi rmation tone, and DELETED! appears in the display .
26 Using the V oice Mail Service If you subscribe to a voice mail service, you can use your phone to access your voice mailbox. The new message LED on the handset fl ashes and appears in the handset display whenever you have messages waiting in your voice mailbox.
27 Selecting a Ring T one ( Handset only) Y ou may choose from four melodies or three tones for your phone’s primary ring tone. Each handset can use a dif ferent ring tone or melody . The available ring tones are as listed: 1) Press [Menu/Select] . Select the HANDSET SETUP menu, and then the RINGER TONES submenu.
28 Using Y our Phone From a cordless handset From a handset speaker phone Making a call Pick up the handset from the cradle. 1) Press 2) [ /Flash] . Listen for the dial tone. 3) Dial the number . 4) OR Pick up the handset from the cradle. 1) Dial the number .
29 Making a Call from the Phonebook When the phone is in standby , press 1) [ ] to open the phonebook. Find the phonebook entry you want to call (see Finding a Phonebook Entry on 2) page 23). Press 3) [ /Flash] or [ ] to dial the number . Note: Y ou can also press [ /Flash] or [ ] before you open the phonebook.
30 Using Caller ID, Call W aiting, and Redial Lists If you subscribe to Caller ID service from your phone company , your phone will show you the caller ’ s phone number and name (if available) whenever a call comes in.
31 Deleting Caller ID Numbers T o delete only one Caller ID number , press [ ] when the phone is in standby , and then fi nd the number you want to delete. Press [Menu/Select] and select DELETE ENTRY . When the phone asks you to con fi rm, select YES.
32 Deleting a Redial Record If you want to delete a phone number from the handset’s redial list, follow the steps below: When the phone is in standby , press 1) [Redial/Pause] . Use 2) [ ] and [ ] to scroll through the redial list. When you fi nd the redial number you want to delete, press 3) [Menu/Select] and select DELETE ENTRY .
33 Adjusting the Audio T one If you aren’t satis fi ed with the audio quality of your phone, you can adjust the Audio T one of the earpiece while on a call. Y our phone gives you three audio tone options: low , natural and high; the default setting, Natural T one, is recommended for hearing aid users.
34 Conferencing If you have more than one handset, up to three people can participate in a conference call. A three-way conference call consists of an outside line and two handsets. Y ou can easily join a call already in progress. The handsets must be currently connected to the same base (see page 21).
35 Using Special Features Privacy Mode If you don’t want other handsets to interrupt you while on a call, turn on privacy mode. As long as your handset is in privacy mode, other handsets can’t join your call or make any calls of their own: their displays will show UNA V AILABLE.
36 Answering an Intercom Page When the intercom page tone sounds, the display will show the ID of the handset that is paging. Press 1) [ /Flash] or [Clear/Int’com] . If AutoT alk is on, the handset will automatically answer the page when you pick up the handset from the cradle.
37 Line Mode Setup (Base only) The Line Mode Setup feature is only used in instances where you have multiple phones where users may pick up an extension while someone else is on the phone. Only in very rare instances where your phone system is not detecting that an extension phone is picked up will you ever need to change this feature.
38 Setting Up the Answering System Using the Answering System Setup Menus Y our handset controls all of the answering system setup options except for the personal greeting (personal greetings must be changed directly at the base).
39 Selecting a Greeting Once you have recorded a personal greeting, the phone automatically switches to your personal greeting. Y ou can also switch back and forth between the pre-recorded greeting and your own greeting at any time. When the phone is in standby , press 1) [greet] on the base.
40 Setting the Number of Rings The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message.
41 While your answering system is set to “Announce only ,” the message counter LED on the base displays “A.” If you are using the prerecorded greeting, the system automatically switches to the following message: “Hello, no one is available to take your call.
42 Using the Answering System T urning Y our Answering System On and Off From the base From the handset T urning On When the phone is in standby , press 1) [answer on/off] . The system announces “Answering System 2) is on” and plays the current greeting.
43 Reviewing Messages The base message counter LED displays the number of messages stored in memory . When you have new messages, the message counter LED on the base and the new message LED on the handset fl ash. The answering system plays your new messages fi rst.
44 Screening Calls If you activate the call screening feature, you can listen to callers leaving a message without answering the phone (see Activating Call Screening on page 41). Y ou can always hear callers from the base speaker . T o screen an incoming call from the handset: Press • [ /Mute] when the system is answering.
45 Operating the Answering System While Y ou Are Away from Home Y ou can access your answering system while you are away from home to check, play , and delete messages, or turn your answering system on and off. Notes: The answering system will only playback messages for four minutes and then it returns to the command waiting • mode.
46 Maintenance Speci fi cations Operating T emperature 32° F to 122° F (0° C to 50° C) AC Adapter Part Number Base: AAD-041S Charger: AAD-600S AC Adapter Input V oltage Base: 240V AC, 50 Hz Charger: 240V AC, 50 Hz AC Adapter Output V oltage Base: 9V DC @ 350mA Charger: 9V DC @ 210mA Battery Part Number BT -652 Battery Capacity 2.
47 Cleaning the Battery Contacts T o maintain a good charge, clean the charging contacts on the handset once a month. Dampen a cloth with plain water . Gently rub the damp cloth over the charging contacts until all visible dirt is removed. Dry the contacts thoroughly before returning the handset to the cradle.
48 T roubleshooting Resetting the Handset Y ou may need to reset your handset in the following instances: Y ou lose a handset and purchase a new one. • Y ou get the message Registration Failed when you try to register the handset. • Y ou are unable to register any handsets to the base.
49 Resetting the Handset Without the Base If your original base is not available for some reason, you can still reset the handset and use it with another base. Press and hold 1) [ ] and [#] for at least fi ve seconds. Move the cursor to select BASEUNA V AILABLE and then press 2) [Menu/Select] .
50 Common Issues If your phone is not performing to your expectations, please try these simple steps fi rst. If these steps do not solve your problem, please visit Uniden’s customer support page at www .uniden.com.au (Australian model) or www .uniden.
51 Symptom Suggestion The Caller ID does not display . The call was placed through a switchboard. • Call your telephone provider to verify your Caller ID service is current. There may • be a problem with your Caller ID service. The handset doesn’t ring or receive a page.
52 Symptom Suggestion Cannot access answering system from a remote phone. Make sure you are using the correct PIN number . • Make sure that the touch-tone phone you’re using can transmit the tone for at • least two seconds. If it cannot, try using a different touch-tone phone.
53 Precautions! Before you read anything else, please observe the following: W arning! Uniden Australia and Uniden New Zealand DOES NOT represent this unit to be waterproof. T o reduce the risk of fi re, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.
54 Index A Answering calls............................ 28 Answering system ....................... 38 Using the answering system interface............................. 38 When away from home ............ 45 Any key answer ........................... 27 AutoT alk .
55 Ringer....................................... 36 N Name T ag .................................... 18 O Out of range................................. 49 P Personal identi fi cation number (PIN) ..................................... 41 Personal ring .
56 Remote Operation Card Remote access away from home T urn on the answering system remotely 1. Call your phone number from a touch-tone phone. 2. During the outgoing message, press # and enter your PIN code. The answering system announces the number of messages stored in memory and the voice prompts.
57 CUT T ask Key Repeat a Message Play Incoming Messages Skip a Message Delete a Message Stop Operation Answering System On Answering System Off Help CUT T ask Key Repeat a Message Play Incoming Messa.
58 ONE YEAR LIMITED WARRANTY UNIDEN DECT 6035 and DECT 6035+1 CORDLESS PHONE IMPORTANT : Evidence of original purchase is required for warranty service. WARRANTOR : Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited Warranty only available in original country of purchase.
© 2007 Uniden Australia Pty Limited Uniden New Zealand Limited Printed in China UCZZ01903BZ(0) DECT6035, 6035+1 OM.indb 59 DECT6035, 6035+1 OM.indb 59 8/8/07 3:25:48 PM 8/8/07 3:25:48 PM.
Ein wichtiger Punkt beim Kauf des Geräts Uniden 6035 + 1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden 6035 + 1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden 6035 + 1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden 6035 + 1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden 6035 + 1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden 6035 + 1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden 6035 + 1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden 6035 + 1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden 6035 + 1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
