Benutzeranleitung / Produktwartung S1210 des Produzenten Acer
Zur Seite of 62
Acer Projector S1110/T200/XS-S10/S1210/T210/XS- X10/S1210Hn/S1213/T212/XS-X13/ S1213Hn/T212DT/XS-X13HG/ S1310W/T220/XS-W10/S1310WHn/ S1313W/S1313WHn Series User's Guide.
Copyright © 2012. Acer Incorporated. All Rights Reserved. Acer Projector S1110/ T200/XS-S10/S1210/ T210/ XS-X10/S1210Hn/S12 13/T212/XS-X13/ S1213Hn/ T212DT/XS-X13HG/S1310W/T2 20/ XS-W10/S1310WHn/S131.
iii Information for Your Safety and Comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instruct ions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning.
iv • To avoid damage of internal componen ts and to prevent battery leakage, do not place the product o n a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected sho rt current or damage rotor devices, lamp.
v Product servicing Do not attempt to service this product yourself, as opening o r removing covers may expose you to dangerous vo ltage points or other risks.
vi might cause fire or electric shock. In this case, unplug immediately and contact your dealer. • Do not keep using this product to break or drop it. In this case contact your dealer for inspection. • Do not face the projector lens to the sun. It can lead to fire.
vii Caution for Listening To protect your hearing, follow these instructions. • Increase the volume gradually until you can hear clearly and comfortably. • Do not increase the volume level af ter your ears have adjusted. • Do not listen to music at high volumes f or extended periods.
viii First Thing First Usage Notes Do : • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
Information for Your Safety and Comfort iii First Thing First viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Contr.
Troubleshooting 30 LED & Alarm Definition Listing 34 Replacing th e Lamp 35 Ceiling Mount Install ation 36 Specification s 39 Compatibility Modes 41 Regulations and safety notices 45.
1 English Introduction Product Features This product is a single-chip D LP ® projector, including the followin g outstanding features: • DLP ® technology • S1110/T200/XS-S10: Native 800 x 600 SV.
2 English Package Overview This projector comes with all the i tems shown below. Check to make sure you have them all. Contact your dealer imm ediately if any thing is missing.
3 English Projector Overview Projector Outlook Front / upper side Rear side # Description # Description 1 Control panel 5 Power key and Power indicator LED 2 Projection lens 6 Focus ring 3 Elevator bu.
4 English Control Panel # Function Description 1 LAMP Lamp In dicator LED 2 Power key and Power indicator LED Refer to the "Turning the Projector On/ Off" section. 3 Keystone Adjusts image distor tion caused by tilting projection (±40 degr ees).
5 English Remote Control Layout # Function Description 1 POWER Refer to the "Turning the Projector On/Off" section. 2 ASPECT RATIO To choose the desired aspect ratio. 3 ZOOM Zooms the proj ector display in or out. 4 RESYNC Automatically synchronizes the projector to the input source.
6 English 13 FREEZE To pause the screen image. 14 HIDE Press " HIDE " to hide screen image; press again to display the image. 15 SOURCE Chooses RGB, compon ent video, S- Video, compo site video or HDTV source.
7 English Getting Started Connecting the Projector • S1110/T200/XS-S10/S1210/T210/XS-X10/S1310W/T220/XS-W10 Note: To ensure the projector works well with your comp uter, please make sure the timing of the display mode is compatible with the projector.
8 English • S1210Hn/S1213/T212/XS-X13/S1213Hn/T212DT/XS-X13H G/S1313W/ S1310WHn/S1313WHn Note: To ensure the projector work s well with your computer, please make sure the timing of the display mode is compatible with the projector.
9 English Turning the Projector On/Off Turning On the Projector 1 Remove the len s cap. 2 Ensure that the power co rd and signal cable ar e securely connected. The Power LED will ligh t red. 3 Turn on the proje ctor by pressing (POWER) on the control p anel or remote control, and the Power indicator LED will turn blue.
10 English Turning Off the Projector 1 To turn the projector off, press the power button. This message appears: "Please press the power button again to complete the shutdown process." Press the power button again. 2 The LED power indicato r will turn solid red to indicate sta ndby mode.
11 English Adjusting the Projected Image Adjusting the Height of the Projected Image The projector is equipped with an elevator foo t for adjusting the image height. To raise the i mage: 1 Press the elevator button. 2 Raise the image to the desired hei ght angle, then release the button to lock the elevator foot into position.
12 English How to Optimize Image Size and Distance Consult the table below to find the optimal im age sizes achievable when the projector is positioned at a desired distance from the screen.
13 English • S1310W/T220/XS-W10/S1310WHn/S1313W/S1313WHn If the projector is 4 m from the screen, good image quality is possible for image sizes around 379". Note: Remind as below figure, the space of 510 cm height is required when located at 2 m distance.
14 English How to Get a Preferred Image Size by Adjusting Distance and Zoom The table below shows how to ach ieve a desired image size b y adjusting either the position or the zoom ring. • S1110/T200/XS-S10/S1210/T210/XS-X10/S1210Hn/S1213/T2 12/XS-X13/ S1213Hn/T212DT/XS-X13HG To obtain an image size of 50" set the projector at a distance 0.
15 English • S1310W/T220/XS-W10/S1310WHn/S1313W/S1313WHn To obtain an image size of 50" set the projector at a distance 0.5 m from the screen. Desired Image Size Distance (m) Top (cm) Diagonal (inch) < A > W (cm) x H (cm) Max zoom < B > Min zoom < C > From base to top of image < D > 30 65 x 40 0.
16 English User Controls Installation Menu The Installation menu provides an on screen display (OSD) for projector installation a nd ma inte nance. Use the OSD on ly when the message "No signal input" is disp layed on the screen. 1 Turn on the proje ctor by pressing (POWER) on the control p anel or remote control.
17 English Acer Empowering Technology Empowering Key Acer Empowering Key provides three Acer unique functions: "Acer eView Management", "Acer eTimer Management", and "Acer ePower Management". Press " " for more than one second to launch th e Onscreen Display main menu to modify its function.
18 English Onscreen Display (OSD) Menus The projector has multil ingual Onscre en Display (OSD) men us that a llow you to make i mage adjustments an d change a vari ety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the control p anel or remote control.
19 English Color Display Mode There are many factory presets optimized for various types of images. • Bright: Fo r brightness optimizati on. • Presentation: For meeting presentation with higher brightness . • Standard: For common envir onment. • Video: For pla ying video i n a bright envi ronment.
20 English Note: "Saturation" and "Tint" functions are no t supported under comput er mode. Color Temperature Adjusts the color temperature. At higher color temperatures, the screen looks colder; at lower colo r temperatures, the screen looks warmer.
21 English Image Projection • Front-Desktop: The factory default setting. • Front-Ceiling: When you select this function , the projector inverts the image for ceiling-m ounted projection . • Rear-Desktop: When you select this function, the projector reverses the image so that you can project behind a translucent screen.
22 English Sharpness Adjusts the sharpness of the image. • Press to decrease the sharpness. • Press to increase the sharpness. H. Position (Horizontal Position) • Press to move the image left. • Press to move the image right. V. Position (Vertical Position) • Press to move the image down.
23 English Note: "H. Position", "V. Position", "Frequency" and " Tracking" functions are not supported under vi deo mode.
24 English Setting Menu Location Chooses the OSD menu locati on on the display screen. HDMI Color Range (S1210Hn/ S1213Hn/ T212DT/XS- X13HG/ S1310WHn/ S1313WHn) Adjusts the color range of the HDMI image data to prevent color display error. • Auto: Automatically adjusts the color range by information from the player.
25 English Security Security This projector provides a usef ul sec urity function for the administrator to manage the projector. Press to change the "Security" setting. If the security function is enabled, your must enter "Administrator Password" first before changing the security setting.
26 English Administrator Password You can enter "Administrator Password" when the "Enter Administrator Password" or "Enter Password" dialogue box displays. • Press to change "Administrator Password". • The factory default of "Administrator Password" is "1234".
27 English LAN Setting (for S1210Hn/ S1213Hn/ T212DT/XS- X13HG/ S1310WHn/ S1313WHn) To connect your projector to the network: 1 Take a RJ45 cable and conn ect one end to the LAN input jack of the projector and the oth er end to the RJ45 port. 2 Enter the LAN Setting menu.
28 English Note: "HDMI Co lor Range" is only available wh en the input signal is HDMI. About LAN Setting (for S1210H n/S1 213Hn/T212DT/XS-X13HG/S1310WHn/ S1313WHn) Note 1 : An overview of the re mote network operati on page Note 2 : An overview of the Tools page Note 3: The Info page shows the projector infor mation and status.
29 English Management ECO Mode Choose "On" to dim the pro jector lamp, which will also lower the power consum ption, reduce noise, and extend the lamp life. Choose "Off" to return to the normal mode. High Altitude Choose "On" to turn on th e High Altitude mod e.
30 English Audio Timer Volume • Press to decrease the volume. • Press to increase the volume. Mute • Choose "On" to turn mute on. • Choose "Off" to turn mute off. Timer Location Sets the location of the timer on the screen.
31 English Language Language Sets a language for the OSD menus. Use to select your preferred language. • Press to confirm the selection..
30 English Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the follo wing troubleshooting guide. If the problem pe rsists, please contact your local reseller or service center.
31 English 3 Partial , scrollin g or incorrectly displayed image (For notebooks) • Press "RESYNC" on the contr ol panel or remote control. • For an incorrectly displaye d image: • Follow the steps for item 2 (above) to adjust the resolution of your computer.
32 English Problems with the Projector 8 Image is stretc hed when displaying a "widescreen" DVD title When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: • If you pl ay a 4: 3 forma t DVD t itle, pl ease cha nge the format to 4:3 with the proj ector OSD.
33 English OSD Messages # C ondition Message Rem inder 1 Message Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used. P lease also check the dust filters if they are installed.
34 English LED & Alarm Definition Listing LED Messages Message Power LED LAMP LED TEMP LED Red Blue Red R ed Standby (Power cord plugged in) V- - - - - - Power on -- V -- -- Lamp retry -- Qui ck f.
35 English Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life itself. It will show you a warning message "Lamp is approach ing the end of its useful life in full powe r operation.
36 English Ceiling Mount Installation If you wish to install the projector using a ce iling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included.
37 English 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow fo r proper heat distribution.
38 English 5 Adjust the angle and po sitioning as necessary. Note: The appropriate type of screw and washer for each mo del is listed in the table below.
39 English Specifications The specifications below are subject to change without notice. For final specs, please refer to Acer's marketing documentation.
40 English * Design and specifications are subject to chan ge without notice. Power consumption (typical) • S1110/T200/XS- S10/S1210/T210/XS- X10/S1210Hn/ S1310W/T220/XS-W10/S1310 WHn: 240 W • S12.
41 English Compatibility Modes 1 VGA Analog - PC Signal Mode Resolution V.Frequency [H z] H.Frequency [KHz] VGA_60 640 x 480 59.94 31.469 VGA_72 72.809 37.861 VGA_75 75 37.5 VGA_85 85.008 43.269 VGA_120 119.518 61.91 SVGA_56 800 x 600 56.25 35.156 SVGA_60 60.
42 English 2 HDMI - PC Sign al (For S1210Hn/S1213Hn/T212DT/XS-X13HG/ S1310WHn/S1313WHn) WXGA_60 1280 x 768 59.87 47.776 WXGA_75 74.893 60.289 WXGA_85 84.837 68.633 WXGA_60 1280 x 720 60 45 WXGA_60 1280 x 800 59.81 49.702 WXGA+_60 1440 x 900 59.887 55.
43 English 3 HDMI - Video Signal (For S1210Hn/S1213 Hn/T212DT/XS-X13HG/ S1310WHn/S1313WHn) 4 YPbPr Signal UXGA_60 1600 x 1200 60 75 Mac G4 640 x 480@60Hz 59.94 31.469 MAC13 640 x 480@67Hz 66.667 35 Mac G4 800 x 600@60Hz 60.317 37.879 Mac G4 1024 x 768@60Hz 60 .
44 English 5 Video, S-Vid eo Signal 576p 720 x 576 50.00 31.25 720p 1280 x 720 60.00 45.00 720p 1280 x 720 50.00 37.50 1080i 1920 x 1080 60.00 33.75 1080i 1920 x 1080 50.00 28.13 1080p 1920 x 1080 60.00 67.5 1080p 1920 x 1080 50.00 56.26 1080p 1920 x 1080 24.
45 English English Regulations and safety notices FCC notice This device has been tested and fo und to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
46 English Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Confor mity for EU countries Acer hereby, declares that this projector series is in complianc e with the essential requirements and other relevant provisions of Directive 1999/5/EC.
47 English English List of applicable countries This device must be used in strict accorda nce with the regulations and constrai nts in the country of use. For f urther information , please contact a local offi ce in the country of u se. Please see ht tp://ec.
48 English Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 2 21, Taiwan Declaration of Conformity We , Acer Incorporated 8F , 88, Sec. 1, Xintai 5th Rd ., Xizhi, New T aipei City 221, T aiwan Contact Person: Mr. RU Jan, e-mail:ru_jan@acer .
49 English English Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 2 21, Taiwan The standards listed below ar e applied to the product if built with WLAN module or wir eless keyboar d and mouse. R&TTE Directive 1999/5/EC as attested by confor mity with the following harmonized standa rd: • Article 3.
50 English Acer America Corporation 333 W est San Carlos St., San Jose CA 95110, U. S. A. T el: 254-298-40 00 Fax: 254-298-4147 www .acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules.
Ein wichtiger Punkt beim Kauf des Geräts Acer S1210 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Acer S1210 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Acer S1210 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Acer S1210 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Acer S1210 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Acer S1210 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Acer S1210 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Acer S1210. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Acer S1210 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
