Benutzeranleitung / Produktwartung T-35 des Produzenten True Manufacturing Company
Zur Seite of 24
............ www.truemfg.com ............ TABLE OF CONTENTS Safety Information Safety Precautions 1 TSD Do’s and Don’ts 2 Proper Disposal 3 Connecting Electricity 4 Adapter Plugs 4 Installation / .
............ www.truemfg.com ............ True Food Service Equipment, Inc..
............ www.truemfg.com ............ SAFETY INFORMATION True Food Service Equipment, Inc. 1 1 This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used. Do not allow children to climb, stand or hang on the shelves in the refrigerator.
............ www.truemfg.com ............ True Food Service Equipment, Inc. SAFETY INFORMATION 2 2.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 3 3 SAFETY INFORMATION PROPER DISPOSAL OF THE FREEZER / REFRIGERATOR DANGER! RISK OF CHILD ENTRAPMENT USE OF EXTENSION CORDS NEVER USE AN EXTENSION CORD! TRUE will not warranty any refrigerator that has been connected to an extension cord.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 4 4 The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 5 5 INSTALLATION / OPERATION INSTRUCTIONS To insure that your unit works properly from the first day, it must be installed properly. We highly recommend a trained refrigeration mechanic and electrician install your True equipment.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 6 6 INSTALLATION / OPERATION INSTRUCTIONS P A. Set unit in its final location. Be sure there is adequate ventilation in your room. Under extreme heat conditions, (100°F+, 38°C+), you may want to install an exhaust fan.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 7 7 INSTALLATION / OPERATION INSTRUCTIONS Rail End Lower Rail Assembly Snug Fit Here Leveling Shim Castor Leg Bearing Race Lower Rail Assembly Snug Fit Here Rail End Thread castor into the underside of cabinet frame rail.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 8 8 Final Location A. Place styrofoam corners behind cooler for cushion and carefully tilt unit on it’s back. B. Remove the louvered grill by removing four phillips-head screws.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 9 9 INSTALLATION / OPERATION INSTRUCTIONS Wire Gauge for 2% Voltage Drop in Supply Circuits 115 Volt Distance In Feet To Cen.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 10 10 INSTALLATION / OPERATION INSTRUCTIONS A. Before your new unit is connected to a power supply, check the incoming voltage with a voltmeter. If anything less than 100% of the rated voltage for operation is noted, correct immediately.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 11 11 INSTALLATION / OPERATION INSTRUCTIONS A. The compressor is ready to operate. Plug in the cooler. B. Temperature control set at No. 4 position gives refrigerators an approximate temperature of 35°F.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 12 12 SHELVING INSTALLATION / OPERATION & LIGHT SWITCH LOCATION INSTALLATION / OPERATION INSTRUCTIONS SHELF & ORGANIZER INSTALLATION: Step 1 A. Hook shelf clips onto shelf standards.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 13 13 INSTALLATION / OPERATION INSTRUCTIONS FREEZERS DEFROST TIME CLOCK OPERATION (Grasslin Timer) RECOMMENDED DEFROST SETTINGS: True Manufacturing has factory set your defrost time clock to a recommended time and duration defrost scenario.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 14 14 INSTALLATION / OPERATION INSTRUCTIONS IF THE COMPRESSOR WILL NOT RUN 1. If there is no voltage at the compressor terminals, follow the wiring diagram and check back from compressor to the power supply to find where the circuit is interrupted.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 15 15 INSTALLATION / OPERATION INSTRUCTIONS 4. If all operating conditions are normal, the voltage supply at the compressor .
............ www.truemfg.com ............ True Food Service Equipment, Inc. 16 16 INSTALLATION / OPERATION INSTRUCTIONS REQUIRED TOOLS • none STEP 1 Locate rubber gasket behind lamp holder mounted to evaporator housing.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 17 17 MAINTENANCE, CARE & CLEANING REQUIRED TOOLS: • Phillips Screwdriver • Stiff Bristle Brush • Adjustable Wrench • Air Tank or CO 2 Tank • Vacuum Cleaner Step 1 Disconnect power to unit.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 18 18 Condensers accumulate dirt and require cleaning every 30 days. Dirty condensers result in compressor failure, product loss, and lost sales... which are not covered by warranty.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 19 19 MAINTENANCE, CARE & CLEANING TERMS: Cut-out - Temperature sensed by the controller that shuts the compressor off. Cut-in - Temperature sensed by the controller that turns the compressor on.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 20 20 MAINTENANCE, CARE & CLEANING CAUTION: Do not use any steel wool, abrasive or chlorine based products to clean stainless steel surfaces.
............ www.truemfg.com ............ True Food Service Equipment, Inc. MAINTENANCE, CARE & CLEANING 21 21 WARNING: Disconnect power to cabinet before replacing light bulbs.
............ www.truemfg.com ............ 22 22 WARRANTY INFORMATION (U.S.A & CANADA ONLY!) ONE YEAR PARTS & LABOR WARRANTY TRUE warrants to the original purchaser of every new TRUE refrigerat.
Ein wichtiger Punkt beim Kauf des Geräts True Manufacturing Company T-35 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie True Manufacturing Company T-35 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für True Manufacturing Company T-35 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von True Manufacturing Company T-35 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über True Manufacturing Company T-35 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon True Manufacturing Company T-35 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von True Manufacturing Company T-35 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit True Manufacturing Company T-35. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei True Manufacturing Company T-35 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.