Benutzeranleitung / Produktwartung Wireless N Gaming Adapter des Produzenten TRENDnet
Zur Seite of 60
- 1 -.
S t atement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FC C Rules. These limits are designed to provide reasonable protection against harmful interference in a re sidential installation.
- 3 - firmware setting is not accessible by the end user . European Union Notice: Radio products with the CE marking comply wit h the R&TTE Dir ective (1999/5/EC), the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC ) issued by the Commission of the European Community.
Table of Contents T able of Contents .............................................................................................................................. ........ 4 1. Getting Started with the TEW - 647GA ............................
C .............................................................................................................................. ............................. 42 D ...................................................................................
1. Getting Started with the TEW-647GA Congratulations on purchasing the TEW -647GA! Th is manual provides information for setting up and configuring the TEW -647GA.
2. Introduction The TEW -647GA Wireless N Gaming Adapter is an high-performance, supports high-speed wireless networking at home, at wo rk or in public places. This bridge is also back comp atible with 802.1 1g or 1 1b devices. This means that you do not need to change your entire network to maintain connectivity .
3. Hardware Overview 3.1. LED Indications 8.
3.2. Rear Panel 3.3 T op View 3.4 Bottom V iew 9.
3.3 Inst allation Considerations The TEW-647GA Gaming Adapter allows you to access your network by using a wireles s connection from virtually any where within its oper ating range. Keep in mind that the number , thickness and location of walls, ceil ings, or other objects that the wireless signals must pass through, ma y limit the range.
3.4 Getting S t art 1. Insert Setup Wizard CD into your CD-ROM drive. 2. The Welcome screen appears on your monitor. Click Setup Wizard button. 3. Read the License Agreemen t, accept the terms and click Next to continue the installation.
4. Connect an Ethernet cable from the LAN port on your PC to the LAN port on the TEW-647GA, click Next to continue. 5. Plug in the power adapter and verify the Power & Ethernet LEDs are light.
6. The search window will detect the c onnected TEW -647GA on our pc and display information here. Click Configure to continue (default TEW -647GA IP Address is 192.168.10.1 10). 7. Enter the password for TEW-647GA the click Login . The default password is “blank”.
8. To change new password, please enter the new password below then click Change . Note: To continue without changing the password, please click on the Skip button 9. There are 2 options to configure this adapter, WPS (Wi-Fi Protected Setup) or Manual Setup.
When selecting PBC method, once the Enable WPS is clicked, also press the WPS on your wireless router, t he devices would negotiate and connection automatically. When using the PIN Method , please enter the Device PIN num ber on your router and save it.
11. When the connection is made, it is recomme nded that you save or print your wireless settings with the Save or Print buttons. Click Apply to continue. 12. Disconnect the Ethernet cable from your PC to the destination game console. 16 13. Congratulations you hav e configured you TEW-647GA.
14. When using Manual Setup , you can select to receive an IP address dynamically from the router or to use an fix IP address that matches your network segment on TEW-647GA. Once you made the selection, click Next to continue. To use static IP, please make sure it matches your wireless network.
15. Enter a SSID for TEW-647GA, click Next button. Note: Enter the SSID of the wireless router/a ccess point you would like to connect to. Select the wireless mode and the security m ode that your current wireless network is 18 using.
WEP Encryption 16. To use WEP security, select WEP and click Next button. Select 64-bit or 128-bit WEP key length, and enter your WEP key. For 64-bit encryption, enter 10 hexadecimal characters, For 128-bit encryption, enter 26 hexadecimal characters.
18. Confirm your new settings. It is recommended that you save or print your wireless settings with the Save or Print buttons. Once finished, click Apply to continue.
20. Congratulations you hav e configured you TEW-647GA. 21.
4. Using the Configuration Menu Whenever you want to configure your TEW - 647GA, you can access the Configuration Menu through your PC by opening the Web-browser and ty ping in the IP Address of the TEW - 647GA. The TEW -647GA ’ s default IP Address is http://192.
4.1. Network 4.1.1 LAN Setting LAN Connection T ype Choose "S tatic IP (fixed IP)" if your router does not support DHCP or if for any other reason you need to assign a fixed address to the AP . In this case, you must also configure the following fields.
4.2 Wireless 4.2.1 Profile Create a custom connection to a specific wirele ss network. Use this option to make custom profiles and store new profile for later use. Configure the setting to connect to a wireless net work, selection option for network type, SSID, and wireless security .
When adding an Profile, please make sure your information ma tches your existing wireless network. Security Mode Unless one of these encryption modes is selected, wireless transmission s to and from your wireless network can be easily intercepted and interpreted by unauthorized users.
provided so you can enter a string that is easier to remember. The ASCII string is conv erted to HEX for use over the network. Four keys can be defined so that you can change keys easily.
4.2.2 Site Survey Use the Site Survey tool to search for wireless networks around the TEW -647GA adapter . Click on the Scan button to search for wireless network to join. From this window , you can also add the selected network to your profile by clicking the Add Profile button.
4.2.3 S t atistics V iew the current operating st atus of the TEW -647GA, see the T ransmit and Receive data. 28.
4.2.4 Advance Use this setting to adjust the wireless environment. Wireless Modes 2.4GHz 802.1 1b/g mixed mode - This wireless mode works in the 2.4GHz frequency range and will allow both wireless b and wirele ss g client to connect a nd access the TEW -647GA at 1 1Mbps for wireless b, at 54Mbps for wirele ss g and share access at the same time.
2.4GHz 802.1 1 n only – This wireless mode works in the 2.4GHz frequency range and will only allow the use of wireless n client devices to connect and access the TEW -647GA.
Using “Auto” option can increase throughput. Howe ver, it can also increa se error rate in some installations, due to increased sensit i vity to radio-frequency reflections . Select the option that works best for your installation. MCS Fix MCS rate for HT rate.
WMM Power Saving An option that allows wireless clients such as notebooks or Laptop s to save battery life by sending less transmission during idle times.
4.2.6 WPS Y ou can setup security easily by choosing PIN or PBC method to do Wi -Fi Protected Setup. PIN Start or PBC Start Enable the WPS feature. 33.
PIN Settings A PIN is a unique number that can be used to ad d to the rout er and use t hat as an au thentication key to join the existing wireless network. Client PIN Shows the current value of the adapter. Renew PIN Create a random number that is a valid PIN.
4.2 Administrator 4.2.1 Management At this page, you can configure ad ministrator account and password. 35.
4.2.2 Upload Firmware By assigning firmware location, you can upload firmware at this page. Once you have a firmware saved on your computer , use this option to browse for the file and then click Apply to upload the file into the adapter .
4.2.3 Setting Management Y ou can save system settings by exporting them to a configuration file, restore them by importing the file, or reset them to factory default.
Export Settings This option allows you to export and then save t he router's configuration to a file on your computer . Be sure to save the configur ation before performing a firmware upgrade. Import Settings Use this option to restore previously saved router configuration settings.
4.2.4 Stat u s Y ou can check system information and network configurations on this page. 39.
Glossary A Access Control List ACL. This is a database of network devices that are allowed to access resources on the network. Access Point AP. Device that allows wireless clients to connect to it and access the network Ad-hoc network Peer-to-Peer network between wireless clients Address Resolution Protocol ARP.
To provide credentials, like a Password, in order to verify that the person or device is really who they are claiming to be Automatic Private IP Addressing APIPA.
C CAT 5 Category 5. Used for 10/100 Mbps or 1Gbps Ethernet connections Client A program or user that reques ts data from a server Collision When do two devices on the same Ethernet net work try and transmit data at the exact same time.
A predetermined value or setting that is used by a program when no user input has been entered for this value or setting DHCP Dynamic Host Configuration Protocol: Used to automatically assign IP addre.
The most widely used technology for Local Area Networks. F File server A computer on a network that stores data so that the other comput ers on the network can all access it File sharing Allowing data.
GUI Graphical user interface H Half-duplex Data cannot be transmitted and received at the same time Hashing Transforming a string of characters into a shorter string with a predefined length Hexadecim.
IIS Internet Information Server is a WEB serv er and FTP server provided by Microsoft Infrastructure In terms of a wireless network, this is w hen wireless clients use an Access Point to gain access t.
IPX Internetwork Packet Exchange is a network ing protocol developed by Novel to enable their Netware clients and servers to communicate ISP Internet Service Provider J Java A programming language use.
L2TP Layer 2 Tunneling Protocol M MAC address A unique hardware ID assigned to every Et hernet adapter by the manufacturer. Mbps Megabits per second MDI Medium Dependent Interface is an Ethernet port .
NAT Network Address Translation allows many private IP addresses to connect to the Internet, or another network , through one IP address NetBEUI NetBIOS Extended User Interface is a Local Area Network communica tion protocol.
Open Systems Interconnection is the refer ence model for how data should travel between two devices on a network OSPF Open Shortest Path First is a routing protocol that is used more than RIP in large.
PPPoE Point-to-Point Protocol over Ethernet is us ed to connect multiple co mputers to a remote server over Ethernet PPTP Point-to-Point Tunneling Protocol is used for creating VPN tunnels over the In.
RJ-45 The most commonly used connection method for Ethernet RS-232C The interface for serial communication betwe en computers and other related devices RSA Algorithm used for encrypt ion and authentic.
Small Office/Home Office SPI Stateful Packet Inspection SSH Secure Shell is a command line interface that allows for secure connections to remote computers SSID Service Set Identifier is a name for a .
Throughput The amount of data that can be transferred in a given time period Traceroute A utility displays the routes between y ou computer and specific destination U UDP User Datagram Protocol Unicas.
VPN: A secure tunnel over the Internet to connect remote offices or users to their company's network VLAN Virtual LAN Voice over IP Sending voice information over the Internet as opposed to the P.
Wi-Fi Protected Access An updated version of security for wireless ne tworks that provides authentication as well as encryption Wide Area Network The larger network that your LAN is connect ed to, whi.
Specifications Ha rdwa re Standards IEEE 802.11b, IEEE 802.11g and IEEE 802.11n (dr aft 2.0) LED Indicator WPS, WLAN, LAN , Po w er .
Limited Warranty TRENDnet war rants its products ag ainst def ects in material and workmanship, under normal use and service, for the fo llowing lengths of time from the da te of purchase.
W ARRANTIES EX CLUSIVE : IF THE TRENDNET PRODUCT DOES NO T OPE RA TE AS W ARRANTED ABOVE, THE CUST OMER’S SOLE REMED Y SHALL BE, AT TRENDNET ’S OPTION, REP AIR OR REPL ACE.
60.
Ein wichtiger Punkt beim Kauf des Geräts TRENDnet Wireless N Gaming Adapter (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie TRENDnet Wireless N Gaming Adapter noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für TRENDnet Wireless N Gaming Adapter - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von TRENDnet Wireless N Gaming Adapter reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über TRENDnet Wireless N Gaming Adapter erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon TRENDnet Wireless N Gaming Adapter besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von TRENDnet Wireless N Gaming Adapter verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit TRENDnet Wireless N Gaming Adapter. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei TRENDnet Wireless N Gaming Adapter gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
