Benutzeranleitung / Produktwartung TS128M~8GJF2A des Produzenten Transcend
Zur Seite of 25
128MB~8GB JetFlash™ User’s Manual P/N: TS128M~8GJF2A ( Version 1.1 ).
Table of Contents Introduction Package Cont ent s .................................................................................................... 1 Featur es ........................................................................................
Introduction Thank you very much for purchasing Transcend’s JetFlash™ . This small device is designed to expedite exchanging huge amounts of data between any desktop or notebook computer with a USB port.
System Requirement s Desktop or notebook computer with USB port One of following operating systems: • Windows ® 98SE • Windows ® Me • Windows ® 2000 • Windows ® XP • Mac™ OS 9.0 or later • Linux™ Kernel 2.4.2 or later Driver Installation Driver Inst allation for Windows 98SE 1.
2. Select Install or update driver . Click Start to continue. 3. After Install or update driver is completed, click OK . 4. Plug JetFlash into an available USB port. A new Removable Disk drive with a newly assigned drive letter appears in the My Computer window.
Driver Inst allation for Windows Me, 2000, and XP No driver is required. These Windows operat ing systems have built-i n drivers to support JetFlash . Simply plug JetFlash into an available USB port, and Windows will install the files needed to use your device.
2. Select Uninstall driver . Click Start to continue. 3. After Uninstall driver has been completed, click OK . To Safely Unplug JetFlash T o Remove JetFlash in W indows 98SE Unplug JetFlash from your system directly when data is not being transferred.
3. Follow the o n-screen instructions to complete the procedure. 4. The Safe To Remove Hardware message window appears. JetFlash is now ready to be unplugged. T o Remove JetFlash in Mac OS Drag and drop the Disk icon corresponding to JetFlash into the trashcan.
System Requirement s for the Boot-Up Function • • • A desktop or notebook computer that supports USB-ZIP or USB-HDD as the First Boot Device in BIOS Windows 98SE or Me on the C: drive Any anti-virus program present must be turned off Boot-Up Function is not supported for Mac or Linux Operating Systems.
Format Introduction JetFlash Product Number, Drive Letter and Capacity Information of Partitioned Disk 1 Disk-Volume bar. Use it to make two partitions and adjust the capacity sizes. The minimum size is 2MB. Information of Partitioned Disk 2 Progress bar T ype of Format Quick: Erase and check blocks at the same time.
Configuration Slide the Disk-Volume bar to adjust the disk size of your JetFlash . You can make one disk or two disks by adjusting the volume sizes. The options will change automatically and enable your choice. Make an USB-ZIP startup disk: When the size of Disk 1 is set to be larger than 2MB.
Option 1: Make an USB-ZIP st artup disk a. Select Type of format (Quick, Full or Configure device only) and Make USB-ZIP startup disk option. Click Start to continue. b. After the completion of the format, you need to re-insert JetFlash to enable the settings.
Option 2: Make an USB-HDD st art up disk (Only for W indows 98SE) a. Select Type of format (Quick, Full or Configure device only) and Make USB- HDD startup disk option. Click Start to continue. b. After the compl etion of the format, you need to re-insert JetFlash to enable the settings.
Create T wo Partitions Slide the Disk-Volume bar to adjust the size of Disk1 to fit your needs. The size of Disk2 will be changed automatically according to the size of Disk1 , as adjusted by the user. JetFlash can be setup to a USB-ZIP or USB-HDD boot-up mode as indicated below.
b. After the completion of the format, you need to re-insert JetFlash to enable the settings. Restart your computer and press the Delete key (or whatever key combination is correct for your computer) during boot-up to enter Setup (CMOS Setup Utility) to reconfigure BIOS .
b. After the completion of the format, you need to re-insert JetFlash to enable the settings. Restart your computer and press the Delete key (or whatever key combination is correct for your computer) during boot-up to enter Setup (CMOS Setup Utility) to reconfigure BIOS .
Security Function The Security Function is not supported by Mac or Linux Operating Systems. Security Function for Windows 98SE, Me, 2000, and XP Create Single Partition 1. You must run the mFormat Utility program on the JetFlash to enable this feature.
3. Set default password window will appear and require you to enter the password. Enter the Password and the Password hint you want, and click OK . 4. Return to the Format Utility window. Click Start to continue. 5. Make sure you have performed a backup of the files on your JetFlash .
2. 3. 4. Set default password window will appear and require you to enter the password. Enter the Password and the Password hint you want, and click OK . Return to the Format Utility window. Click Start to continue. After the completion of the format, you need to re-insert JetFlash to enable the settings.
Use of JetFlash with Security Function Enabled 1. Insert JetFlash and run the mFormat Utility program. Click the Login button . 2. Enter the co rrect password to access data on the secured disk. 3. When you finish, you need to safely remove JetFlash to protect data (procedure described as below).
Change the Password 1. Insert JetFlash , run the mFormat Utility program and click Login , the Login window appears. 2. Click Change >> to continue. 3. Key in the New pas swo rd , Re-Enter new password and a Hint . 4. Click OK to complete the change of password.
PC-Lock Function Once the PC-Lock function is enabled, you can use the JetFlash as a key to lock your computer, protecting it from being used by unauthorized persons. The PC-Lock function is not supported on Mac and Linux Operating Systems. To use the PC-Lock function, you must login into the Windows OS with Administrator rights.
5. Then click o n the Enable button to enable the PC-Lock function. 21.
Specifications Size: 75mm x 25mm x 11mm (Mini Size) 88mm x 33mm x 15mm (Normal Size) Weight: 15 g (Mini Size) 24 g (Normal Size) Data Retention: Up to 10 years Erase Cycles: ＞ 100,000 times Speed: Read 10.0 MB/sec (Max.) Write 8.
JetFlash Limited Warranty “Above and beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm. It’s all part of our commitment to Customer Satisfaction.
Ein wichtiger Punkt beim Kauf des Geräts Transcend TS128M~8GJF2A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Transcend TS128M~8GJF2A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Transcend TS128M~8GJF2A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Transcend TS128M~8GJF2A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Transcend TS128M~8GJF2A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Transcend TS128M~8GJF2A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Transcend TS128M~8GJF2A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Transcend TS128M~8GJF2A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Transcend TS128M~8GJF2A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
