Benutzeranleitung / Produktwartung 5010 des Produzenten Trango Broadband
Zur Seite of 45
Ffirm Atlas5010™ Point-to-Point Wireless Ethernet Bridge USER MANUAL June, 2007 Revision 3.0.
Preface FCC Information Trango Broadba nd Wireless — Atlas-4 5 page ii Table of Contents Preface ........................................................................................................................................................
Preface FCC Information Trango Broadba nd Wireless — Atlas-4 5 page iii Upgrade Proced ure ................................................................................................. 32 Example 1 Upgrade main im age fir mware to 1.0a6 ........
Preface FCC Information Trango Broadba nd Wireless — Atlas-4 5 page iv Preface This manual covers the basic configuration and installation of the Atlas5010 Wireless Point to Point Broadband System, .
Preface Contact Information Trango Broadba nd Wireless — Atlas-4 5 page v Contact Information Corporate Headquar ters Trango Broadband Wireless, a d ivision of Trango Systems, Inc. 15070 Ave nue of Sci ence Suit e 200 San Diego, CA 921 28 USA Web Sites www.
Overview OFDM Trango Broadba nd Wireless — Atla s5010 page 6 Chapter 1 Overv iew The Atlas5010 is a point-to-point (PtP) wireless Ethernet tr ansmission system which provides network connectivity at speeds up to 45 Mbps depending on the transmission distance and noise floor.
Overview Range vs. Throughput Trango Broadba nd Wireless — Atla s5010 page 7 Range vs. Throughput The followin g table shows a pproxim ate maxim um ranges (at recommended fade margi ns) achievabl e with the Atlas5010 system using various antenn a configurations.
Overview System Contents Trango Broadba nd Wireless — Atla s5010 page 8 System Contents The Atlas5010 system is available in two versi ons: Atlas5010-INT - Radios with integrated 23 dBi antennas (pa.
Overview Location of Serial Number & MAC Ad dress Trango Broadba nd Wireless — Atla s5010 page 9 Location of Serial Nu mber & MAC Address The serial number and MAC address label can be found on the back of each rad io. The serial number and MAC a ddress is also provided within the system information (sysinfo) screen.
Getting Started Connections and Power Trango Broadba nd Wireless — Atla s5010 page 10 Chapter 2 Getting Started It is always a good idea to first provision and test the radios on the bench be fore deployi ng them in t he field. This is a particularly useful exercise for the novice user.
Getting Started Configuration Tools Trango Broadba nd Wireless — Atla s5010 page 11 Configuration Tools Atlas5010 radios can be configured using either the Co mmand Line Interface (CLI), or the Web Browser (HTTP) interface. The CLI m ethod provides slightly more functionality.
Getting Started Troubleshooting Ethernet Connections Trango Broadba nd Wireless — Atla s5010 page 12 Troubleshooting Ethern et Connections If you cannot telnet into th e radio or open an HTTP browser session, check your cable connections to ensure prop er use of cross-over v s.
Getting Started System Information (sysinfo) Page Trango Broadba nd Wireless — Atla s5010 page 13 Sysinfo Exam ple: #> sysinfo ********************************* 0 ********************************.
Getting Started System Information (sysinfo) Page Trango Broadba nd Wireless — Atla s5010 page 14 [Eth In] 55,256,030 bytes 24 Kbps [Eth Out] 3,348,202 bytes 3 Kbps [RF In] 1,377,125 bytes 0 Kbps [RF Out] 45,499,374 bytes 44 Kbps [ARQ Retransmission] 881 pkts Success.
Getting Started System Information (sysinfo) Page Trango Broadba nd Wireless — Atla s5010 page 15 Section 3 Channel Table: (M Hz, n/a: n ot available in current area) [Ch#01] 5700 n/a [Ch#02] 5700 n.
Configuration Key Conc epts Trango Broadba nd Wireless — Atla s5010 page 16 Chapter 3 Configur ation Key Concepts Prior to configuring the radios it is impor tant to understand several key concep ts: Master Unit (MU) The MU is typically considered th e pr im ary radio wit hin the l ink.
Configuration Remote Unit Configuration Trango Broadba nd Wireless — Atla s5010 page 17 2. Set the Peer ID with t he MAC address of the RU. O nly use t he last 8 dig its of the MAC address. #> peerid de1B7850 Success. #> 3. Set channel and polari zation.
Configuration Changing IP Address Trango Broadba nd Wireless — Atla s5010 page 18 [Speed] 54 Mbps [Tx Power] 17 dBm [Power Range] -4..17 dBm [Peer ID] DE1B7747 [Status] connected [RSSI] -44 dBm [Peer IP Config] 10.8.2.139 255.255.255.224 10.8.2.129 Success.
Configuration RF Link Loopbac k Test (linktest command) Trango Broadba nd Wireless — Atla s5010 page 19 In addition, these 4 LEDs shall flash ON for 2 seco nds, then OFF for 2 seconds to indicate the 'factory reset' button has bee n activated and the reset successful.
Configuration Link Speed & Power S ettings Trango Broadba nd Wireless — Atla s5010 page 20 Link Speed & Power Settings Users may change the ra dio’s over-t he-air dat a rate and co nducted outp ut power using the speed an d power commands.
Configuration Automatic Rate Shifting Feature Description Trango Broadba nd Wireless — Atla s5010 page 21 Automatic Rate Shifting Feature Description With autorateshift feature ena bled, the radios will au tom atically renegotiate the modulation m ethod and speed speed to maximize wireless link integrity.
Configuration MIR Feature Description Trango Broadba nd Wireless — Atla s5010 page 22 MIR Feature Description Maxim um Informati on rate is configurable on bot h the MU and RU. The MIR functio n is perf ormed on the transmit si de only and is based on a one second tim ing interv al.
Configuration Command Reference Listing Trango Broadba nd Wireless — Atla s5010 page 23 Command Reference Listing The complete comman d set reference is provided below. Yo u can also view a com plete listing of all CLI c ommands by typing hel p . Command Sy ntax Description antenna [h|v] Set or display antenna setting.
Configuration Command Reference Listing Trango Broadba nd Wireless — Atla s5010 page 24 defaultopm ode [on|off] Set or displa y default opmode. R adio m ust be set to opm ode ON to establish wireless link. Default setting=OFF encrypt [on|off] Enable or disable pro prietary 128 bit tx encryption.
Configuration Command Reference Listing Trango Broadba nd Wireless — Atla s5010 page 25 sysinfo [[<par t #> [<part #> [..]]]] Display system infor mation and status <part #> = 0.
Deployment & Installation Site Selection Trango Broadba nd Wireless — Atla s5010 page 26 Chapter 4 Deployment & Installation Once you are familiar with the basic operation of the radios you are ready for deployment in the field.
Deployment & Installation Channel Planning Trango Broadba nd Wireless — Atla s5010 page 27 Ch 23 h 5815 : -98 / -98 n/a / n/a Ch 23 v : -98 / -98 n/a / n/a Ch 24 h 5835 : -98 / -98 n/a / n/a Ch 24 v : -98 / -98 n/a / n/a Success.
Deployment & Installation Port Pl ug and Port Plate (Hardware ) Trango Broadba nd Wireless — Atla s5010 page 28 Port Plug and Port Plate (Hardware ) Prior to deployment, insert the silicone port plug around the Ca t-5 Cable and insert in to the radio’s port opening.
Deployment & Installation Connecting External Antenna on EXT Model Trango Broadba nd Wireless — Atla s5010 page 29.
Deployment & Installation Cat-5 Cabling Considerations Trango Broadba nd Wireless — Atla s5010 page 30 Cat-5 Cabling Considerations Shielded twisted pair Cat-5 cable is recommended for all installa tions. The shield within the Cat-5 cable does not need to be grounded if the radio itself is grounded.
SNMP Atlas SNMP Support Trango Broadba nd Wireless — Atla s5010 page 31 Chapter 5 SNMP Atlas SNMP Support The Atlas sup ports SNMP (Simpl e Network Managem ent Protocol). Networ k managem ent consists of the follo wing 3 categories: configuration , Link and Association monitoring and Alarms.
Firmware Upgrade Procedure Firmware File Names Trango Broadba nd Wireless — Atla s5010 page 32 Chapter 6 Firmware Upgr ade Procedure Trango Broadband Wireless will from time to time release firmware upgrades for t he Atlas series radios. The latest released firmware can be downloaded from http://www.
Firmware Upgrade Procedure Example 1 Upgrade main image firmware to 1.0a6 Trango Broadba nd Wireless — Atla s5010 page 33 Example 1 Upgrade main image firmware to 1.0a6 FROM RADIO TELNET SESSION Welcome to Trango Broadband Wireless, Atlas PtP-P5010M 3p0r1D07061901 Password: Login as read/write.
Appendix A Command Set Reference Trango Broadba nd Wireless — Atla s5010 page 34 Appendix A Using the HTTP Interface Open a browse r session and t ype in the IP address of one of the radi os. Defaul t IP addre ss is 192.168.1 00.100. Leave the User nam e field bla nk and enter re ad write or read only Pa ssword.
Appendix A Command Set Reference Trango Broadba nd Wireless — Atla s5010 page 35 Navigation li nks are show n on the left side of the browser screen.
Appendix A Command Set Reference Trango Broadba nd Wireless — Atla s5010 page 36 Description of System Information entries. To view this information within the radio, click the Help link. Model: Model number. Unit Type: Atlas unit type either MU (master) or RU (remote).
Appendix A Command Set Reference Trango Broadba nd Wireless — Atla s5010 page 37 RF In: Counter for Ethernet packe ts whi ch entered over-the-air into the radio.
Appendix A Command Set Reference Trango Broadba nd Wireless — Atla s5010 page 38 Activate Opmode Of f: Activates radio's Opmode to "Off" not-transmitting. Reboot: Reboot the unit. Close All Telnet Sessions: Close all the active telnet sessions.
Appendix A Command Set Reference Trango Broadba nd Wireless — Atla s5010 page 39 All user con figurable param eters can be entered from the Co nfiguration Screen and this is the only screen used to provision a wireless link between the two radios.
Appendix A Command Set Reference Trango Broadba nd Wireless — Atla s5010 page 40 Connection Status.
Appendix A Command Set Reference Trango Broadba nd Wireless — Atla s5010 page 41 Site Survey Page The site survey function measures overall noise floor as well as in-band noise containing data p ackets. Noise is reported in terms of a verage and peak dBm for the peri od tested.
Appendix A Command Set Reference Trango Broadba nd Wireless — Atla s5010 page 42 Link Control The Link Cont rol page feat ures the RF Lin k Loopback / Speed Te st. In this test, the user specifies the t ransmission rat e (in Mbps) i n b oth the local radio an d the pee r radio as wel l as the duration time (in minutes) for the test.
Appendix B Specifications Trango Broadba nd Wireless — Atla s5010 page 43 Appendix B Specifications RF Parameters Transmitter RF Conducted Power: Limits Band 4 (US ISM ): Max: +21 dBm (6 Mb ps) 5.
Appendix B Specifications Trango Broadba nd Wireless — Atla s5010 page 44 Data Parameters Format: 10/100 BaseT IEEE 802.3 Ethernet com pliant Ethernet packet: Up to 1518 byte packets Regulatory Compliance FCC Standards FCC 15.109 FCC 15.203 Antenna FCC 15.
Appendix B Specifications Trango Broadba nd Wireless — Atla s5010 page 45 Antennas Integrated A ntenna (for Atla s5010-INT) Frequency ra nge: 5250-5850 MHz Gain: 23 dBi +/- 1 dB Front/Back Ratio >.
Ein wichtiger Punkt beim Kauf des Geräts Trango Broadband 5010 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Trango Broadband 5010 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Trango Broadband 5010 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Trango Broadband 5010 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Trango Broadband 5010 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Trango Broadband 5010 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Trango Broadband 5010 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Trango Broadband 5010. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Trango Broadband 5010 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
