Benutzeranleitung / Produktwartung TL-SL3226P des Produzenten TP-Link
Zur Seite of 22
Rev 1.0 E-mail: export@tp-link.com.cn User's Guide User's Guide TL-SL3226P TL-SL3226P 24+2G Gigabit Switch Managed 24+2G Gigabit Managed Switch.
T able of contents Checklist...............................................................................................1 Chapter 1 About this User's Guide...................................................1 1.1 Usage..........................
4.2 How to connect TELNET ...........................................................12 4.3 How to connect Out-of-Band.....................................................13 4.4 The interface and operating way of TELNET/Out-of-Band........14 4.4.1 Configure System.
Checklist Open the box and carefully unpack the TL-SL3226P . You should have all the items on the following checklist: ! One TL-SL3226P Switch ! One AC power cable ! One Serial cable ! One User's.
! Support static priority and IEEE802.1p class of service with 2-level priority mode ! Support Static MAC address management and MAC address Binding ! Provide the configuration function of port securi.
3.1.3 Power On The TL-SL3226P can be used with the power source in the range of 1 10 to 260VAC, 50 to 60Hz. The internal power system of the TL-SL3226P can automatically adjust the operating power-pressure according to the power-pressure input. The POWER LED will be light when power on.
3.2 Connecting the Switch 3.2.1 Front Panel There are 2 extension module slots, 24 10/100Mbps ports, one console (RS232) port and LED indicators on the front panel of the TL-SL3226P . Module Slot The module slots can connect 100M/1000M module card and GBIC card.
supports the power cord. Plug-in the female connector of the provided power cord into this socket, and the male side of the cord into a power outlet. Supported input voltage range from 110 to 260V AC at 50-60Hz. The port for connection to the ground There is a port on the left of the panel for the connection to the ground.
! The TL-SL3226P can start to work with the correct power supply. Please confirm whether the power supply is accordant to the requirements of the TL-SL3226P . ! In order to avoid the risk of the power-attach, don't open the shelf of the TL-SL3226P when it works.
4.3 How to connect Out-of-Band Out-of-Band Management needs a terminal or a HyperT erminal. First, connect the Switch's console port with the PC's console port by the console cord. Then, run HyperT erminal. Refer to the following figure to configure the HyperT erminal.
The management interface is the menu drive. After you log on, you will in the first menu as following: I llumination: System Configuration includes system information such as software/hardware version, module information, switch parameter such as broadcast storm filter mode, file transmission, save and reset.
The assumpsit of normal control button in the operating interface is as following: <Arrow Key>= Direction Button: up, down, left, right moves cursor <Tab> =T ab Button: move the cursor to .
! ! Switch Parameters 1) Assigned Managed Port: can be any port or all ports from P1 to P26. Only the workstation connecting to the Assigned Managed Port in the Switch can manage the Switch. The default is All ports. 2) Broadcast Strom Filtering Mode: have six choices: 5%, 10%, 15%, 20%, and 25%.
the IEEE802.1X protocol of Port 2 has been configured to be Enable. Please note Port Security, T runk and IEEE802.1X protocol are mutually exclusive. In other word, when you configure one of them, other two can't be configured. State The port can be used when the State is Enable, while the port is prohibited when the State is Disable.
10HD: 10Mbps, Half-Duplex 10FD: 10Mbps, Full-Duplex 100HD: 100Mbps, Half-Duplex 100FD: 100Mbps, Full-Duplex 1000HD: 1000Mbps, Half-Duplex 1000FD: 1000Mbps, Full-Duplex Default VID There is this choice only in the IEEE802.1Q T ag VLAN mode. Every port on the Switch has a Default VID which is the VID for an Untag T ag received by the port.
is too short however, many entries may be aged out too soon. This will result in a high percentage of received packets whose source addresses cannot be found in the forwarding table, in which case the switch will broadcast the packet to all ports, egating many of the benefits of having a switch.
T able. Static MAC Address Filter MAC Address Force UNAUTH MAC Address Authorized MAC Address 2) No matter which port the MAC Address of the Force UNAUTH MAC T able relates to, the Switch won't transfer its' packets.
2) When you configure a Trunk, the ports added to the T runk will be deleted from all VLANs no matter whether you create a Trunk or add the port to a Trunk. If you delete any port or delete the whole T runk, the original port in the Trunk can't reset to any VLAN.
Please choose Automatically , then press OK. The Third step: Choose Security User-defined. The Forth Step: Choose Enable in the Active Scripting or choose Reset to Medium , press Reset and press OK. The Fifth step: Press the right button of the mouse, choose Propertiesin the menu existed.
5.2.2 Connection We propose the IP address of the Switch is 192.168.0.2, you can input http://192.168.0.2/ in the IE to connect the Switch. Then press Enter , the following screen will exist. Input the user's name and password (the default user's name and password are supervisor.
Cross Cable The Switch (normal port) connects to the switch/hub/other equipments (normal port). Usually, the Straight Cable is required to connect to the switch (Uplink Port) or NIC. The following Figure shows the facture of the Straight Cable and the Cross Cable.
IEEE802.1x Prot ocol Port Configuration State Disable (all ports) Force AUTH MAC Table N/A Force UNAUTH MAC N/A T able VLAN Management VLAN Mode IEEE802.
Ein wichtiger Punkt beim Kauf des Geräts TP-Link TL-SL3226P (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie TP-Link TL-SL3226P noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für TP-Link TL-SL3226P - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von TP-Link TL-SL3226P reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über TP-Link TL-SL3226P erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon TP-Link TL-SL3226P besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von TP-Link TL-SL3226P verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit TP-Link TL-SL3226P. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei TP-Link TL-SL3226P gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
