Benutzeranleitung / Produktwartung TL-MR3040 des Produzenten TP-Link
Zur Seite of 242
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Rev: 1.0.0 1910010615.
COPYRIGHT & TRADEMARKS S pecifications ar e subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of t heir respective holders.
FCC RF Radiation Exposure S t atement This equipment complies with FCC RF radiati on e xposure limits set forth fo r an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter .
III Industry Canada S t atement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference re ceived, including interference that may cause undesired operation.
TP-LINK TECHNOLOGIES CO., L TD DECLARA TION OF CONFORMITY For the following equipment: Product Description: Portable 3G/3.75G Battery Powered Wireless N Router Model No.
CONTENTS Package Contents .......................................................................................................................... 1 Chapter 1. Introduction ............................................................................
4.7.1 DHCP Settings ............................................................................................... 54 4.7.2 DHCP Client s List ........................................................................................... 56 4.7.3 Address Reservation .
4.16.5 Backup & Restore ........................................................................................... 96 4.16.6 Reboot ............................................................................................................ 97 4.
5.1 1.2 Host .............................................................................................................. 153 5.1 1.3 T arget ...........................................................................................................
V 6.6.5 Wireless S tatistics ......................................................................................... 202 6.7 DHCP .......................................................................................................................
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Package Contents The following items should be found in your package: ¾ TL-MR3040 Portable 3G/3.75G Battery Powered Wireless N Router ¾ Power Adapter ¾ Battery ¾ USB Cable ¾ Ethernet cable ¾ Quick Install ation Guide ¾ Resource CD for TL-MR3040 Portable 3G/3 .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Chapter 1. Introduction Thank you for choosing the TL-MR3040 Portable 3G/3.75G Battery Powered Wireless N Router.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Provides Automatic-connection and Scheduled Co nnection on certain time to the Internet ¾ Built-in NAT and DHCP server supporting aut.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch The following parts are lo cated on the rear panel (V iew from left to right). ¾ Ethernet Port: This port can be LAN or W AN por t depending on the working mode.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Chapter 2. Connecting the Router 2.1 System Requirement s ¾ 3G/3.75G Mobile Broadband Internet Acce ss Service (With a UMTS/HSP A/EVDO U.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your Portable 3G/3.75G Battery Powered Wireless N Router using Quick Setup Wiz ar d within minutes.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router WISP Client Router Mode In this mode, the TL-MR3040 is wirelessly connected to the WISP (Wireless Internet Service Provider) and share the internet to multiple users.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router TL-MR3040 is used to extend the range of wirele ss signal of the existing AP or wireless router . In this mode, the only wired port works as LAN. Computer could connect to the device by either wired or wireless way .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Client TL-MR3040 is used as a wireless network card to connect the wireless network signal or wireless router . In this mode, the only wired port works as LAN. Computer could connect to the device by either wired or wireless way .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Settings → Control Panel → V iew network st atus and t asks → Manage network connection .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 3-2 Login Windows ) Note: If the above screen does not pop-up, it means that your Web-browser has been set to a proxy . Go to T ools menu>Internet Options>Connections >LAN Settings, in the screen th at appears, cancel the Using Proxy checkbox, and click OK to finish it.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Then you can configure the Wireless Settings according to the mode. 1. 3G Router Mode 1. Choose the Internet Access type, and then click Next . Here we take 3G Only for example. Figure 3-5 Quick Setup – Internet Access ¾ 3G Only - Only use 3G as the access to the Internet.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router then click Next . 1) Create a unique and easy-to-rememb er Wireless Network Name . 2) Select WP A-Personal/WP A2-Personal under Wireless Securit y and enter a password in the field. Figure 3-7 Quick Setup – Wireless 4.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 3-9 Quick Setup – W AN Connection T ype ¾ If Auto-Detect is chosen, the router will detect the Internet c onnection type provided b y your ISP automatically .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ If the connection type is Dynamic IP , t he next screen will appear as shown in Figure 3-12 . Figure 3-12 Quick Setup – MAC Clone z If you are visiting the Router from the main computer, please select Yes , and then click Clone MAC Address .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router z Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0. z Default Gateway - Enter the gateway IP address into the box if required. z Primary DNS - Enter the DNS Server IP address into the box if required.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ) Note: After the rebooting, please reconnec t to the network according to 3.2.1 Connect to Network . If Wireless Security is enabled, you need to enter the password you’ve just set to succe ssfully finish the connecting.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router default SSID is set to be TP-LINK_POCKET_3040_xxxxxx (xxxxxx indicat es the last unique six characters of each Router's MAC address), which can ensure your wireless network security. But it is recommended strongly that you change your networks name (SSID) to a different val ue.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router z Name of remote AP (SSID) - Enter the name of a remote AP (also called the SSID) that you want to access. Click the Survey button behind it, you can choos e one of searching results to fill in this field.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router z Channel - This field determines which operating frequency will be used. To achieve more information, you can read t he same glossary in Access Point part. z Add a remote AP - Click the Survey button to fill in the MAC of remote AP (1-4) field.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ) Note: After the rebooting, please change th e PC’ s TCP/IP settings to “ Use the following IP Address ” and “ Use the following DNS Server Addresses ” and enter the address and DNS serve r address manually , and then reconnect to the network according to 3.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router z User Name and Password - Enter the User Name and Passw ord provided by your ISP. These fields are ca se sensitive.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 3-26 Quick Setup - S tatic IP z IP Address - This is the WAN IP address seen by external users on the Internet (including your ISP). Enter t he IP address into the field. z Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 3. Click Next and you will see the page as shown in Figure 3-28 . Click the Reboot button to make your wireless configuration take effect and finish the Quick Setup . (Y ou’re recommended to go to Wireless > Wireless Security to set up the wireless security .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Chapter 4. Configuration—3G Router Mode This chapter will show each Web p age's key f unctions and the configurat ion way on 3G Router Mode. The default mode of the Router is 3G Router .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-1 Router S tatus 4.3 Quick Setup Please refer to Chapter 3 Quick Installa tion Guide . 4.4 Operation Mode On this page, you can choose t he operation mode of the Router . The default mode is 3G Router .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-2 Operation Mode 4.5 Network Figure 4-3 the Network menu There are five submenus under the Network menu (shown in Figure 4- 3 ): Internet Access , 3G , WA N , MAC Clone and LAN . Click any of them, and you will be able to configure the corresponding function.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ 3G Preferred In this mode, the router will try 3G access fi rst. When 3G access fails, or when no 3G USB modem is inserted, the router.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-5 3G Figure 4-6 ¾ Location - Please select the location where you're enjoying the 3G card. ¾ Mobile ISP - Please select the ISP (Internet Service Provider) you apply to for 3G service.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Click the Connect button to connect to your 3G networ k. Once the connection is successful, you will find the 3G screen is similar to Figure 4-7 . Click menu Stat us and you will see the 3G status is s imilar to Figure 4-8 .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Sometimes the connection cannot be disconnec ted althoug h you s pecify a time to Max Idle Time because some applications visit the In ternet continually in the background. ¾ Connect Automatically - Connect automatically after the Router is disconnected.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Set the Dial Number and APN manually - Check the box and fill the Dial Number and APN blanks below if your ISP is not listed in the Mobile ISP list or the default values are not the latest ones.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 1. Download a most recent 3G USB modem configuration file from our website ( http://www .tp-link.com ). 2. Click the Add New... button in Figure 4-10 , and then you will see Figure 4-1 1 .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-12 W AN - Dynamic IP This page displays the W AN IP parameters a ssigned dynamically by your ISP , including IP address, Subnet Mask, Default Gateway , etc. Click the Renew button to renew the IP parameters from your ISP .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 2. If your ISP provides a sta tic or fixed IP Address, Subnet Mask, Gateway and DNS setting, select Static IP .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-14 W AN - PPPoE ¾ User Name/Passw ord - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Secondary Connection - It’s available only for PPPoE Connec tion.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Time-based Connecting - The connection will only be est ab lished in the period from the start time to the end time (both are in HH:MM format).
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Detect Online Interval - The Router will detect Access Concentrator online at every interval. The default value is “0”. Y ou can i nput the value betwe en “0”and “120”. The value “0” means no detect.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router e.g. NSW / ACT - ns w. bigpond.net.au VIC / T AS / W A / SA / NT - vic.bigpo nd.net.au QLD - qld.bigpond.net.au ¾ MTU Size - The normal MTU (Maximum T ransmission Unit) value for most Ethernet networks is 1500 Bytes.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-17 L2TP Settings ¾ User Name/Passw ord - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Dynamic IP/ S t atic IP - Choose either as you are given by your ISP .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Connect Manually - Y ou can configure the Router to make it connect or disconnect manually .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Dynamic IP/ S t atic IP - Choose either as you are given by your ISP and enter the ISP’ s IP address or the domain name. If you choose static IP and enter the dom ain name, you should also enter the DNS assigned by your ISP .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router The Router can not detect PPTP /L2TP/BigPond connections with yo u r ISP. If your ISP uses one of these protocols, then you must configure your connection manually.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-20 LAN ddress - The physical address of the Router , as see n from the LAN. The value - An address code that determines the size of the network.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-22 Wireless Settings ¾ Wireless Network Name - The same name of Wireless Network Name must be assigne d to all wireless devices in your network.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. Select the desired wireless mode. When 802.11g mode is selected, only 802.11g wireless stations can connect to t he Router.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router • Auth T ype - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).It indicates the authorizati on type of the Root AP . • Password - If the AP your Router is going to connect needs password, you need to fill the password in this blank.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router • Ve r s i o n - you can choose the vers ion of the WPA-PSK security on the drop-down list.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-25 • Radius Server IP - Enter the IP address of the Radius Server. • Radius Port - Enter the port that radius service used. • Radius Password - Enter the password for the Radius Server.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router • WEP Key- Select which of the four keys w ill be use d and enter the matching WEP key that you create. Make sure these values ar e identical on all wireless stations in your network. • Key Typ e - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Description - A simple description of the wireless station. To Add a Wireless MAC Address filtering entry, click the Add Ne w… button.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router but all the other wireless st ations cannot access the Router, you can configure the Wireless MAC Filtering list by following these steps: 1. Click the Enable button to enable this function.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Beacon Interval - Enter a value between 40-1000 millise conds for Beacon Interval here. The beacons are the packe ts sent by the router to synch ronize a wireless network. Beacon Interval value determines the time interval of the beacons.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-30 The Router attached wireless st ations ¾ MAC Address - The connected wireless st ation's MAC address.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Protocol) server , which provides the TCP/IP configuration for all the PC(s) that are connected to the Router on the LAN. Figure 4-32 DHCP Settings ¾ DHCP Server - Enable or Disable the DHCP server .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ) Note: To use the DHCP server function of the Router, you must configure all computers on the LAN as "Obtain an IP address automatically" mode.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ MAC Address - The MAC address of the PC for whic h you want to reserve IP address. ¾ Reserved IP Address - The IP address of the Router reserved. ¾ Status - The status of this entry either Enabled or Disabled .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router There are four submenus under the Forwarding menu (shown i n Figure 4-3 6 ): Virtual Servers , Port T riggering , DMZ and UPnP . Click any of them, and you will be able to configure the corresponding function.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 5. Select the Enable check box to enable the virtual server . 6. Click the Save button. Figure 4-38 Add or Modify a Virtual Server Entry .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-39 Port T riggering Once the Router is configured, the operation is as follows: 1. A local host makes an outgoing connection us ing a destination port number defined in the T rigger Port field.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 6. Click the Save button to save the new rule. Figure 4-40 Add or Modify a T riggering Entry T o modify or delete an nt to modify . If you want to delete the entry , click the e information.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-41 DMZ T o assign a computer or server to be a DMZ server: 1. Click the Enable radio button. 2. Enter the local host IP Address in the DMZ Host IP Address field 3. Click the Save button.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router z App Description - The description provided by the application in the UPnP request z External Port - External port, which the router opened for the application. z Protocol - Shows which type of protocol is opened.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-44 Basic Security ¾ Firewall - A firewall protects your network from the outside world.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router z FTP ALG - Select Enable , to allow FTP servers to operate properly. z TFTP ALG - Select Enable , to allow TFTP servers to operate properly. z H323 ALG - Select Enable , to allow H323 services to operate properly.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ ICMP-FLOOD Packet s Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current ICMP-FLOOD Packets number is beyond the set value, the Router will startup t he blocking function immediately .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-46 Local Management By default, the radio button “ All the PCs on the LAN are allowed to access the Router's Web-Based Utility ” is checked.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-47 Remote Management ¾ Web Management Port - Web browser access normally uses the standard HTTP service port 80. This Router's default remote m anagement web port number is 80.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-48 Parental Control Settings ¾ Parental Control - Check Enable if you want this function to take effect, otherwise check Disable . ¾ MAC Address of Parental PC - In this field, enter the MAC address of the controlling PC, or you can make use of the Copy To Above button below.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 6. In the Status field, you can select Enabled or Disabled to enable or disable your entry. 7. Click the Save button. Click the Enable All button to enable all the rules in the list. Click the Disable All button to disable all the rules in the list.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 3. Click “ Parental Control ” menu on the left to go back to the Add or Modify Parental Control Entry page: z Click Add New... button. z Enter 00-11-22-33-44-AA in the MAC Address of Child PC field.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-52 Access Control Rule Management ¾ Enable Internet Access Control - Select the check box to enable the Internet Access Control function, so the Default Filter Policy can take effect.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router There are two methods to add a new rule. Method One: 1. Click Setup Wizard button and the next screen will appear as shown in Figure 4-53 . Figure 4-53 Quick Setup – Create a Host Entry ¾ Host Description - In this field, create a unique description for the host (e.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-54 Quick Setup – Create an Access T arget Entry ¾ Target Description - In this field, create a description for the target. Note that this description should be unique (e.g. Target_1).
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-55 Quick Setup – Create an Advanced Schedule Entry ¾ Schedule Description - In this field, create a descr iption for the schedule. Note that this description should be unique (e.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Rule - In this field, create a name for the rule. Note that this name should be unique (e.g. Rule_1). ¾ Host - In this field, select a host from the drop-down list for the rule. The default value is the Host Description you set just now.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 1. Click the submenu Rule of Access Control in the left to return to the Rule List page. Select Enable Internet Access Control and c hoose "Allow the packets specified by any enabled access control policy to pass through the Router".
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Modify - To modify or delete an existing entry. To add a new entry, please follow the steps below. 1. Click the Add New… button. 2. In the Mode field, select IP Address or MAC Address.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 3. In Host Description field, create a unique description for the host (e.g. Host_1). 4. In MAC Address field, enter 00-11 -22-33-44-AA. 5. Click Save to complete the settings. Then you will go back to the Host Se ttings page and see the following list.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ( www.google.com , www. google.hk ) will be blocked or allowed. You can enter 4 domain names.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 4. In Domain Name field, enter www.google.com. 5. Click Save to complete the settings. Then you will go back to the Target Settings page and see the following list.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-65 Advanced Schedule Settings For example : If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18: 00 to 20:00 on Saturday and Sunday , you should first follow the settings below: 1.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 4.12.1 Static Routing List Choose menu “ Advanced Routing → S t atic Routing List ”, you can configur e the static route in the next screen (shown in Figure 4-67 ). A static route is a pre- determined path that network information must travel to r each a specific host or network.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Other configurations for the entries: Click the Delete button to delete the entry . Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router There are two submenus under the Bandw idth Control menu as shown in Fig ure 4-70 : Control Settings and Rules List . Click any of them, and you will be able to configure the corresponding function.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Ingress bandwidth - This field displays the max and mix download bandwidth through the W AN port. The default is 0. ¾ Enable - This displays th e status of the rule. ¾ Modify - Click Modify to edit the rule.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-75 Binding Settings ¾ MAC Address - The MAC address of the controll ed computer in the LAN. ¾ IP Address - The assigned IP address of the cont rolled computer in the LAN. ¾ Bind - Check this option to enable ARP binding for a specific device.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 3. Click the Find button in the page as shown in Figure 4-77 . Figure 4-77 Find IP & MAC Binding Ent ry Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Click the Load All button to load all items to the IP & MAC Bind ing list. Click the Refresh button to refresh all items. ) Note: An item could not be loaded to the IP & MAC Bind ing list if the IP addres s of the item has been loaded before.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 2. T ype the User Name for your DDNS account. 3. T ype the Password for your DDNS account. 4. Click the Login button to log in to the DDNS service. Connection Status - The status of the DDNS servic e connection is displayed here.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-81 No-ip.com DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the User Name for your DDNS account. 2. T ype the Password for your DDNS account. 3. T ype the Domain Name you received from dynamic DNS service provi de r .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Password, System Log and St atistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanat ions for each submenu are provided below . 4.16.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router T o set time manually: 1. Select your local time zone. 2. Enter the Date in Month/Day/Y ear format. 3. Enter the Tim e in Hour/Minute/Second format. 4. Click Save . T o set time automatically: 1.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-85 Diagnostic T ools ¾ Diagnostic T ool - Check the radio button to select one diagnostic too. z Ping - This diagnostic tool troubleshoots connecti vity , reachability , and name resolution to a given host or gateway .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Click St ar t to check the connectivity of the Internet. The Diagnostic Result s page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of t he Internet is fine.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ) Note: 1) New firmware vers ions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware unle ss the new firmware has a new feature you want to use.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-89 Backup & Restore Configuration ¾ Click the Backup button to save all configuration setti ngs as a backup file in your local computer . ¾ T o upgrade the Router's configurat ion, follow these instructions.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 4.16.7 Passw ord Choose menu “ System T ools → Password ”, you can change the fa ctory default user name and password of the Router in the next screen as shown in Figure 4-91 .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-92 System Log ¾ Log Type - By selecting the log type, only logs of this type will be shown. ¾ Log Level - By selecting the log level, only logs of this level will be shown. ¾ Refresh - Refresh the page to show the latest log list.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 4-93 S tatistics ¾ Current Statistics Status - Enable or Disable. The default value is disabled. To enable , click the Enable button. If disabled, the function of DoS protection in Security settings wi ll disabled.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Statistics Table: IP/MAC Address The IP and MAC address are displayed with related statistics. Packets The total number of packets received and transmitted by the Router. Total Byt es The total number of bytes received and transmitted by the Router.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Chapter 5. C o n f i g u r a t i o n — Wireless Router / WISP Mode This chapter will show each W eb pa ge's ke y functions and the conf iguration way on WISP Mode and Wireless Router Mode.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-1 Router S tatus -103-.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 5.3 Quick Setup Please refer to Chapter 3: "Quick Installation Guide." 5.4 Operation Mode On this page, you can choose t he operation mode of the Router . Here take the WISP Mode as example.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-4 W AN - Dynamic IP This page displays the W AN IP parameters a ssigned dynamically by your ISP , including IP address, Subnet Mask, Default Gateway , etc. Click the Renew button to renew the IP parameters from your ISP .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-5 W AN - S tatic IP ¾ IP Address - Enter the IP address in dotted-decimal not ation provided by your ISP . ¾ Subnet Mask - Enter the subnet Mask provided by your ISP in dotted-decimal notation.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-6 W AN - PPPoE ¾ User Name/Passw ord - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Confirm Password - Re-enter the Password provided by you r ISP to ensure the Password you entered is correct.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Connect Automatically - The connection can be re-establis hed automatically when it was down. ¾ Time-based Connecting - The connection will only be est ablished in the period from the start time to the end time (both are in HH:MM format).
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ ISP S pecified IP Address - If your ISP does not a utomatically assign IP addresses to the Router during login, please click “ Use IP address specified by ISP ” check box and enter the IP address provided by your ISP in dotted-decimal notation.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Auth Domain - T ype in the domain suffix server name based on your location. e.g. NSW / ACT - ns w. bigpond.net.au VIC / T AS / W A / SA / NT - vic.bigpo nd.net.au QLD - qld.bigpond.net.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-9 W AN –L2TP ¾ User Name/Passw ord - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Dynamic IP/ S t atic IP - Choose either as you are given by your ISP .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Otherwise, enter the number of minutes you w ant to have elap sed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after the Router is disconnected.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-10 W AN –PPTP ¾ User Name/Passw ord - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Dynamic IP/ St atic IP - Choose either as you are given by your ISP and enter the ISP’ s IP address or the domain name.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Connect on Demand - Y ou can configure the Router to disconnect from your Internet connection after a specified period of inactivity ( Max Idle Time ).
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-1 1 MAC Address Clone Some ISPs require that you register the MA C Address of your adapter . Changes are rarel y needed here. ¾ WAN MAC Address - This field displays the current MAC ad dress of the WAN port.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. ) Note: 1. If you change the IP Address of LAN, you must use the new IP Address to login the Router .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-14 Wireless Settings – Wireless Router ¾ Wireless Network Name - The same name of Wireless Network Name must be assigne d to all wireless devices in your network.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 11g only - Select if all of your wireless clients are 802.11g. 11n only - Select if all of your wireless clients are 802.11n. 11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ WEP Index - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).It indicates the index of the WEP key. ¾ Auth Type - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ WEP Index - This option should be ch osen if the key ty pe is WEP (ASCII) or WEP (HEX). It indicates the index of the WEP key . ¾ Auth type - This option should be chos en if the key type is WEP (ASCII) or WEP (HEX).
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-16 AP List Figure 5-17 -121-.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ) Note: If you know the SSID of the desired AP, you can also input it into the field "SSID" manually. Be sure to click the Save button to save your settings on this page. ) Note: 1.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-18 ¾ Disable Security - If you do not want to use wireless secu rity, select this check box, but it’s strongly recommended to choose one of t he following modes to enable security.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-19 • PSK Password - You can enter ASCII characters bet ween 8 and 63 characters or 8 to 64 Hexadecimal characters. • Group Key Up date Period - Specify the group key update in terval in seconds.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-21 • Typ e - you can choose the type for the WEP se curity on the pull-down list. The default setting is Automatic , which can select Open Sy stem or Shared Key authentication type automatically based on the wirele ss station's capability and request.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-22 Wireless MAC address Filtering T o filter wireless users by MAC Address, click Enable . The default setting is Disable . ¾ MAC Address - The wireless station's MAC address that you want to filter .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 4. Click the Save button to save this entry . T o modify or delete an existing entry: 1. Click the Modify in the entry you want to modify . If you want to delete the entry , click the Delete .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 5.6.4 Wireless Advanced Choose menu “ Wir el ess → Wireless Advanced ”, and then you can c onfigure the advanced settings of your wireless network. Figure 5-24 Wireless Advanced ¾ Beacon Interval - Enter a value between 40-1000 m illiseconds for Beacon Interval here.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Enable WMM - WMM function can guarantee the packets with high- priority messages being transmitted preferentially. It is strongly recommended ena bled. ¾ Enable Short GI - This function is recommended for it will increase the data capacity by reducing the guard interval time .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 5.7 DHCP Figure 5-26 The DHCP menu There are three submenus under the DHCP menu (shown in Figure 5-26 ): DHCP Settings , DHCP Client s List and Address Reservation. Click any of them, and you will be able to configure the corre sponding function.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Address Lease Time - The Address Lease Time is the amount of ti me a network user will be allowed connection to the Router with their current dynamic IP Address. Enter the amount of time in minutes and the user will be "l e ased" this dynamic IP Address.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 5.7.3 Address Reservation Choose menu “ DHCP → Address Reserva tion ”, and then you can view and add a r eserved address for clients via the next screen (shown in Figure 5-29 ).
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Click the Enable/ Disabled All button to make all entries enabled/disabled Click the Delete All button to delete all entries Click the Next button to go to the next page and click the Previous button to return to the previous page.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Internal Port - The Internal Service Port number of the PC running the service application. Y ou can leave it blank if the Internal Port is the same as the Service Port , or enter a specific port number when Service Port is a single one.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router To modify or delete an existing entry: 1. Find the desired entry in the table. 2. Click Modify or Delete as desired on the Modify column. Click the Enable/ Disabled All button to make all ent ries enabled/ disabled.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 5. Select Enable in Statu s field. 6. Click the Save button to save the new rule. Figure 5-35 Add or Modify a T riggering Entry ¾ T rigger Port - The port for outgoing traffic. An outgoing connection usi ng this port will trigger this rule.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Once the Router is configured, the operation is as follows: 1. A local host makes an outgoing connection to an external host using a destination port number defined in the T rigger Port field.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 5.8.4 UPnP Choose menu “ Forwarding → UPnP ”, and then you can view the information about UPnP in the screen (shown in Figure 5-37 ).
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 5.9 Security Figure 5-38 The Security menu There are four submenus under t he Security menu as shown in Figure 5-38 : Basic Security , Advanced Security , Local Management and Remote Management.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using VPN protocols to pass through the Router. • PPTP Passthrough - Point-to-Point Tunneling Protocol (PPTP) allows the Point-to-Point Protocol (PPP) to be tu nneled through an IP network.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-40 Advanced Security ¾ Packets Statistics Interval (5~60) - The default value is 10. Se lect a value between 5 and 60 seconds from the drop-down list. The Pa ckets S tatistics Interval value indicates the time section of the packe ts statistics.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ ICMP- FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a valu e between 5 ~ 3600. When the current ICMP-FLOOD Packets number is beyond the set value, the Router will startup t he blocking function immediately .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-41 Local Management By default, the radio button “ All the PCs on the LAN are allowed to access the Router's Web-Based Utility ” is checked.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-42 Remote Management ¾ Web Management Port - Web browser access normally uses the standard HTTP service port 80. This Router's default remote m anagement web port number is 80.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-43 Parental Control Settings To add a new entry, please follow the steps below.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Parental Control - Check Enable if you want this function to take effect ; otherwise, check Disable . ¾ MAC Address of Parental PC - In this field, enter the MAC address of the controlling PC, or you can make use of the Copy To Above button below.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 2. Click “ Access Control → Schedule ” on the left to enter the Schedule Settings page. Click Add New... button to create a new schedule with Schedule Description is Schedule_1, Day is Sat and Time is all day-24 hours.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-47 Access Control Rule Management ¾ Enable Internet Access Control - Select the check box to enable the Internet Access Control function, so the Default Filter Policy can take effect.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router There are two methods to add a new rule. Method One: 1. Click Setup Wizard button and the next screen will appear as shown in Figure 5-48 . Figure 5-48 Quick Setup – Create a Host Entry ¾ Host Description - In this field, create a unique description for the host (e.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-49 Quick Setup – Create an Access T arget Entry ¾ Target Description - In this field, create a description for the target. Note that this description should be unique (e.g. Target_1).
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-50 Quick Setup – Create an Advanced Schedule Entry ¾ Schedule Description - In this field, create a descr iption for the schedule. Note that this description should be unique (e.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Rule - In this field, create a name for the rule. Note that this name should be unique (e.g. Rule_1). ¾ Host - In this field, select a host from the drop-down list for the rule. The default value is the Host Description you set just now.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 1. Click the submenu Rule of Access Control in the left to return to the Rule List page. Select Enable Internet Access Control and choose "A llow the packets specified by any enabled access control policy to pass through the Router".
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router To add a new entry, please follow the steps below. 1. Click the Add New… button. 2. In the Mode field, select IP Address or MAC Address. z If you select IP Addre ss, the screen shown is Figure 5-54 .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 5. Click Save to complete the settings. Then you will go back to the Host Se ttings page and see the following list. 5.11.3 Target Choose menu “ Access Control → Ta r g e t ”, you can view and set a T ar get list in the screen as shown in Figure 5-56 .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 3. Click the Save button. Click the Delete All button to delete all the entries in the table. Click the Next button to go to the next page, or click the Previous button return to the previous page.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Then you will go back to the Target Settings page and see the following list. 5.11.4 Schedule Choose menu “ Access Control → Schedule ”, you can view and set a Schedule list in the next screen as shown in Figure 5-59 .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-60 Advanced Schedule Settings For example : If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18: 00 to 20:00 on Saturday and Sunday , you should first follow the settings below: 1.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 5.12.1 Static Routing List Choose menu “ Advanced Routing → St atic Routing List ”, and then you c an configure the static route in the next screen (shown in Figure 5-62 ).
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Click the Delete button to delete the entry . Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries. Click the Delete All button to delete all the entries.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router There are two submenus under the Bandw idth Control menu as shown in Figure 5- 65 : Control Settings and Rules List . Click any of them, and you will be able to configure the corresponding function.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Ingress bandwidth - This field displays the max and mix download bandwidth through the W AN port, the default is 0. ¾ Enable - This displays th e status of the rule. ¾ Modify - Click Modify to edit the rule.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-70 Binding Setting ¾ MAC Address - The MAC address of the controll ed computer in the LAN. ¾ IP Address - The assigned IP address of the cont rolled computer in the LAN. ¾ Bind - Check this option to enable ARP binding for a specific device.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 1. Click the Find button as shown in Figure 5-70 . 2. Enter the MAC Address or IP Address. 3. Click the Find button in the page as shown in Figure 5-72 . Figure 5-72 Find IP & MAC Binding Ent ry Click the Enable All button to make all entries enabled.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Delete - Delete the item. Click the Bind All button to bind all the current items, available after enable. Click the Load All button to load all items to the IP & MAC Bind ing list.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-74 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: 1. Enter the Domain Name your dynamic DNS service provider gave. 2. Enter the User Name for your DDNS account.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-75 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. Enter the User Name for your DDNS account. 2. Enter the Password for your DDNS account. 3. Enter the Domain Name you received from dynamic DNS service provider .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-76 No-ip.com DDNS Settings To set up for DDNS, follow these instructions: User Name amic DNS service provider . Logout e DDNS service. ) Note: t to login again with another account after a successful login, please click the 5.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Choos n see the s ubmenus under the main menu: Ti me ls → Time Settings ”, and then you can conf igure the time on the e menu “ Sys.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ End - The time to end the Daylight Saving. Select the month in the first field, the week in the second field, the day in the third field and the time in the last field. ¾ Daylight Saving St atus - Displays the status whether t he Daylight Saving is in use.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-80 Diagnostic T ools ¾ Diagnostic T ool - Check the radio button to select one diagnostic too. z Ping - This diagnostic tool troubleshoots connecti vity , reachability , and name resolution to a given host or gateway .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Click St ar t to check the connectivity of the Internet. The Diagnostic Result s page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of t he Internet is fine.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ) Note: 1) New firmware vers ions are posted at http://www.tp-link.com and can be downloaded for fr ee. There is no need to upgrade the firmware unle ss the new firmware has a new feature you want to use.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-84 Backup & Restore Configuration ¾ Click the Backup button to save all configuration setti ngs as a backup file in your local computer . ¾ T o upgrade the Router's configurat ion, follow these instructions.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 5.16.7 Passw ord Choose menu “ System T ools → Password ”, you can change the fa ctory default user name and password of the Router in the next screen as shown in Figure 4-86 .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-87 System Log ¾ Log Type - By selecting the log type, only logs of this type will be shown. ¾ Log Level - By selecting the log level, only logs of this level will be shown. ¾ Refresh - Refresh the page to show the latest log list.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 5-88 S tatistics ¾ Current Statistics Status - Enable or Disable. The default value is disabled. To enable , click the Enable button. If disabled, the function of DoS protection in Security settings wi ll disabled.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Statistics Table: IP/MAC Address The IP and MAC address are displayed with related statistics. Packets The total number of packets received and transmitted by the Router. Total Byt es The total number of bytes received and transmitted by the Router.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Chapter 6. Configuration—AP Mode This chapter will show each Web p age's key f unctions and the configurat ion way on AP Mode.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 6-1 Device S tatus ) Note: If you select Client mode in Figure 6-7 , the wireless status in Figure 6-1 will change, similar to the.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 6.3 Quick Setup Please refer to Chapter 3: "Quick Installation Guide." 6.4 Operation Mode On this page, you can choose t he operation mode of the Router . If you want to use other modes, select them as Figure 4-2 shown.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router default settings of the AP . Selecting Network will enable you to configure the I P p a rameters of Network on this p age. Figure 6-4 LAN ¾ MAC Address - The physical address of the AP . The value can't be changed.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Wireless Security , W ireless MAC Filtering , Wireless Advanced and Wireless St atistics . Click any of them, and you will be able to conf igure the corresponding function. The detailed explanations for each submenu are provide d belo w .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router characters of each device’s MAC address). This value is case-sensitive. For example, TEST is NOT the same as test . ¾ Region - Select your region from the pull-down lis t. This field specifies the region where the wireless function of the device can be used.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router area for wireless networks to associate with, they will detect the SSI D broadcast by the device. ) Note: To apply any settings you have alte red on the pag e, please click the Save button, and then you will be reminded to reboot the device.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Note Dialog ) Note: Limited by local law regulations, version fo r North America does not have region selection option. ¾ Channel Width - Determines the channel width to be used. It is unnecessary to change the default value unless required.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 6-8 Wireless Settings in Repeater mode ¾ MAC of AP - Enter the MAC address of the root AP of which you wa nt to expand wireless range. ¾ Region - Select your region from the pull-down lis t.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Enable Wireless Radio - Select or deselect this check box to allow or deny wireless stations to access the device.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router country or region is not listed, please contact your local government agency for assistance. When you select your local region from the pull- down list, click the Save button , then the Note Dialog appears.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ) Note: To apply any settings you have alte red on the pag e, please click the Save button, and then you will be reminded to reboot the device.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router • Ve r s i o n - Y ou can select one of following versions. 1) Automatic (Recommen ded) - Select WP A-PSK or WP A2-PSK automatically based on the wireless station's capability and request.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router • WEP Key - Select which of the four keys w ill be used and enter the matching WEP key information for your network in the select ed key radio button. These values must be identical on all wireless stat ions in your network.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 2) Client Figure 6-1 1 Wireless Security – Client ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disable wireless security . If disabled, the wireless stations will be able to connect this device without encrypt ion.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 1) Automatic - Select Shared Key or Open System authentication ty pe automat ically based on the wireless station's capability and request. 2) Shared Ke y - Select 802.1 1 Shared Key authentication type.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 3) Repeater Figure 6-12 Wireless Security – Repea ter ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disable wireless security .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 1) Automatic - Select Shared Key or Open System authentication ty pe automat ically based on the wireless station's capability and request. 2) Shared Ke y - Select 802.1 1 Shared Key authentication type.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 4) Bridge with AP Figure 6-13 Wireless Security – Bridge with AP ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disable wireless security .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router • Key T ype - Y ou can select the WEP key length ( 64-bit , or 128-bit , or 152-bit .) for encryption.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ¾ Wireless MAC Filtering - Click the Enable button to enable the Wireless MAC Address Filtering. The default setting is disabled. T o Add a Wireless MAC Address filtering entry , click the Add New… button.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 1. Click the Modify in the entry you want to modify . If you want to delete the entry , click the Delete . 2. Modify the information. 3. Click the Save button. Click the Enable All button to make all entries enabled Click the Disabled All button to make all entries disabled.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 6-16 Wireless Advanced ¾ Beacon Interval - Specifies a value between 20-1 000 milliseconds. The beacons are the packets sent by the device to synchronize a wireless network. Beacon Interval value determines the time interval of t he beacons.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 6.6.5 Wireless Statistics Selecting Wireless > Wireless St atistics will allow you to see the wireless transmission information in the following screen shown in Figure 6-17 .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router configure the corresponding functi on. The detailed explanations for each submenu are provided below .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router the PC will be automatically assigned a new dynamic IP address. The range of the time is 1 ~ 2880 minutes. The default value is 120 minutes. ¾ Default Gateway (optional) - Enter the IP address of the gate way for your LAN.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Y ou cannot change any of the val ues on this page. T o update thi s page and to show the current attached devices , click on the Refresh button.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 6.8 System T ools System T ools option helps you to optimiz e the configuration of y our device.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 6-23 T ime Settings ¾ Time Zone - Select your local time zone from this pull down list. ¾ Date - Enter your local date in MM/ DD/YY into the right blanks. ¾ Tim e - Enter your local time in HH/MM/SS into the right blanks.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router T o set time automatically: 1. Select your local time zone. 2. Enter the address or domain of the NTP Server I or NTP Server II . 3. Click the Get GMT button to get system time from In ternet if you have connected to the Internet.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 6-25 Diagnostic T ools ¾ Diagnostic T ool - Check the radio button to select one diagnostic too. ¾ Ping - This diagnostic tool troubleshoots connecti vity , reachability , and name resolution to a given host or gateway .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router The Diagnostic Result s page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of t he Internet is fine. Figure 6-26 Diagnostic Results ) Note: 1.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router ) Note: 1) New firmware vers ions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware unless the new firmware has a new feature you want to use.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 6-29 Backup & Restore Configu ration ¾ Click the Backup button to save all configuration setti ngs as a backup file in your local computer . ¾ T o upgrade the Router's configurat ion, follow these instructions.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 6.8.7 Password Choose menu “ System T ools → Password ”, and then you can chang e the factory defaul t user name and password of the Router in the next screen as shown in Figure 6-31 .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 6-32 System Log ¾ Log Type - By selecting the log type, only logs of this type will be shown. ¾ Log Level - By selecting the log level, only logs of this level will be shown. ¾ Refresh - Refresh the page to show the latest log list.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure 6-33 S tatistics ¾ Current Statistics Status - Enable or Disable. The default value is disabled. To enable it, click the Enable button. If it is disabled, the functio n of DoS protection in Security settings will be disabled.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Statistics Table: IP/MAC A ddress The IP and MAC address are displa yed with related statistics. Packets The total number of packets received a nd transmitted by the Router. Total Bytes The total number of bytes received and transmitted b y the Router.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Appendix A: FAQ 1. How do I configure the Router to access Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Conn ect the Ethernet cable from your ADSL Modem to the W AN port on the Router .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router 1) Login to the Router , click the “Network” menu on the left of your browser , and click "W AN" submenu. On the W AN page, select “Dynamic IP” for "W AN Connection T ype" , finish by clicking “Save”.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure A-5 Add or Modify a Virtual server Entry ) Note: Your opposite side should call your WAN IP , which is displayed on the “Status” page.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure A-7 Basic Security 4. I want to build a WEB Server on the LAN, what should I do? 1) Because the WEB Server port 80 will in terfere with the WEB management port 80 on the Router , you must change the WEB management port number to avoid interference.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router the " Virtual Servers " submenu. On the " Virtual Servers " p age, click Add New… , then on the “ Add or Modify a.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Appendix B: Configuring the PCs In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP . First make sure your Ethernet Adapter is wo rking, refer to the adapter ’s manual if needed.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure B-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure B-3 ¾ Setting IP address manually 1 Select Use the following IP address radio button, and the following items are available. If the Router's LAN IP address is 192.168.0.1, type 192.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Figure B-4 Now click OK to keep your settings. -225-.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Appendix C: Security Mode ¾ None - The wireless security function can be enabl ed or disabled. If you select "None", the wireless stations will be able to connect the Router without encrypt ion.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router z Group Key Update Period - Specify the group key update interval in seconds. The value can be either 0 or at leas t 30. Enter 0 to disable the update. ¾ Use the Previous settings - If you chose this option, wire less security configuration will not change.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Appendix C: Specifications General S tandards IEEE 802.11n 、 IEEE 802.11g 、 IEEE 802.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standar ds by adding MIMO (multiple-input multiple-output).
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router identifying a wireless local area network. Fo r the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID. This is typically the configuration parameter for a wi reless PC card.
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router Appendix E: Compatible 3G/3.75G USB Modem The UMTS/HSP A/EVDO USB modems we’ve tested in the field are listed below . Y ou can find the latest compatibility li st in our website: http://www .
TL-MR3040 Port able 3G/3.75G Battery Powered Wireless N Router -232- HAIER CE100, OLIVE VME110, WM200 HSDC Hsdc-03 MWALKER MBD-100HU MYWAVE FW2012T OPTION iCon 401 PANTECH PX500 QISDA H21 SIERRA WIREL.
Ein wichtiger Punkt beim Kauf des Geräts TP-Link TL-MR3040 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie TP-Link TL-MR3040 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für TP-Link TL-MR3040 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von TP-Link TL-MR3040 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über TP-Link TL-MR3040 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon TP-Link TL-MR3040 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von TP-Link TL-MR3040 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit TP-Link TL-MR3040. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei TP-Link TL-MR3040 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
