Benutzeranleitung / Produktwartung TD-8840 des Produzenten TP-Link
Zur Seite of 39
TD-8840 User Guide External ADSL2+ ROUTER Rev ： 1.0.1.
II COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trade marks or registered trademarks of t heir respective holders.
III FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limit s are designed to pro-vide reasonable protection against harmful interference in a residential installation.
IV Package contents The following contents should be found in your box: ¾ One TD-8840 External ADSL2+ ROUTER ¾ One AC power Adapter fo r TD-8840 External ADSL2+ ROUTER ¾ One Resource CD for TD-8840.
V COMMENT Chapter 1. Introducti on ........................................................................................ 1 1.1 Product Overview ...................................................................................................... 1 1.
TD-8840 External ADSL2+ Router User Guide 1 Chapter 1. Introduction 1.1 Product Overview TP-LINK® TD-8840 External ADSL2+ ROUTER is the latest product designed and manufactured by TP-LINK TECHNOLOGIES CO.
TD-8840 External ADSL2+ Router User Guide 2 ¾ Real-time Configurati on and device monitoring ¾ Quick response semi-conductive surge protec t circuit, provides reliable ESD and surge-protect function 1.3 Supporting protocol - G.992.1 (G.dmt) - Annex A - G.
TD-8840 External ADSL2+ Router User Guide 3 ¾ Max upload data-rate: 1Mbps ¾ Max line length: 6Km 1.5 A TM propert ¾ AAL0, AAL5, OAM, RM, and raw cell types supported ¾ Direct hardware support for .
TD-8840 External ADSL2+ Router User Guide 4 1.9 Conventions The Router or TD-8840, or device mentioned in this User guide stands for TD-8840 External ADSL2+ ROUTER without any explanations. Parameters provided in the pictures are just references for setting up the product, which may differ from the actual situation.
TD-8840 External ADSL2+ Router User Guide 5 Chapter 2. Hardware Installation The TD-8840 maintains five separate interfac es, four Ethernet and one ADSL interface. The Router should not be located where it will be expo sed to moisture or ex cessive heat.
TD-8840 External ADSL2+ Router User Guide 6 port Off No data transmitting or receiving on WAN port On 1~4(LAN) port normal Off Connection on 1~4(LAN) port abnormal LAN(1-4) Ethernet Flash Data transmitting or receiving on 1~4(LAN) port 2.2 Rear-p anel ¾ ON/OFF : Turn on/off the ADSL2+ ROUTER’s power.
TD-8840 External ADSL2+ Router User Guide 7 ROUTER and the other end to a standard electrical outlet. Last Step : Check the line connection to see if ev erything is ready.
TD-8840 External ADSL2+ Router User Guide 8 Chapter 3. System Configuration 3.1 Computer Configuration 1. Connect the cable according to Chapter 2, turn on the power . 2. Change the IP address of your PC （ Figure 3-1 ） : Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.
TD-8840 External ADSL2+ Router User Guide 9 Properties -> Right-click Local Connection -> Choose Properties -> Double-click Internet Protocol (TCP/IP). ) Note: The words in fact may be different with this guide. Remarks: you can check whether your configuration is successful through PING command.
TD-8840 External ADSL2+ Router User Guide 10 Figure 3-4 Y ou will then see the Figure 3-5, you will see some information such as link rate and so on. Figure 3-5 User name and password is “admin”; if you want to change them, pl ease go to “Managem ent” Æ “Access control” Æ “Passwords” changing them.
TD-8840 External ADSL2+ Router User Guide 11 Figure 3-6 3.3 Web Setup Choose “ Advanced Setup ” Æ ” WA N ”, you will enter the page of Wide Area Network (W AN) Setup, you will s ee the Figure 3-7.
TD-8840 External ADSL2+ Router User Guide 12 need, and then click the edit button, you will enter the pa ge of A TM PVC Configuration (See Figure 3-8) Figure 3-8 Enter VPI/VCI value and service category which is provided by your ISP, click next to enter the next step.
TD-8840 External ADSL2+ Router User Guide 13 Figure 3-9 After choosing the proper protoc ol, enter the correct parameters supported by yo ur ISP. Enable the configurations, then you will go to Internet.
TD-8840 External ADSL2+ Router User Guide 14 Figure 3-10 You will see the Figure 3-11, then turn on the se lected functions according to your demands. Clicking the next button to enter the next step, you w ill see the Figure 3-12, finally click save to complete the configuration.
TD-8840 External ADSL2+ Router User Guide 15 Figure 3-12 2. PPP over Ethernet (PPPoE) If you select the protocol of PPP over Ethernet (PPPoE), you will see the Figure 3-13, enter the value of user name and password which is provided by your ISP, after select ing the other function (often using the default setup), click the next button.
TD-8840 External ADSL2+ Router User Guide 16 Figure 3-13 You will see the Figure 3-14, then tu rn on the selected functions acco rding to your needs. Clicking the next button to enter the next step, you will see the Figure 3-15, finally click save to complete the configuration.
TD-8840 External ADSL2+ Router User Guide 17 Figure 3-15 3. MAC Encapsulation Routing (MER) If you select the protocol of MAC Encapsulation Routing (MER ), you will see the page(Figure 3-16), Enter the parameter and the way which is provided by your ISP, then click the next button.
TD-8840 External ADSL2+ Router User Guide 18 Figure 3-16 You will see the Figure 3-17, then tu rn on the selected functions acco rding to your needs. Clicking the next button to enter the next step, you will see the Figure 3-18, finally click save to complete the configuration.
TD-8840 External ADSL2+ Router User Guide 19 Figure 3-18 4. IP over ATM (IPoA) If you select the protocol of IP over ATM (IPoA), you will see the Figure 3-19, enter the parameter and the way which is provided by your ISP, then click the next button.
TD-8840 External ADSL2+ Router User Guide 20 Figure 3-20 Figure 3-21 5. Bridging If you select the Bridging protocol, you just open the bridge serv ice function options, you will see the Figure 3-22, .
TD-8840 External ADSL2+ Router User Guide 21 complete the configuration. Figure 3-22 Figure 3-23 ) Note: After you complete any setup, the new setup must be saved and the Router must be restarted for.
TD-8840 External ADSL2+ Router User Guide 22 the configuration to go into effect. Please click the Save/Reboot button to restart, referring to the Figure 3-24.
TD-8840 External ADSL2+ Router User Guide 23 function in this screen. Figure 3-25 1. Click the Set Address Reservation botton, and the Address Reservation screen pop up, as it showed below ; Figure 3-.
TD-8840 External ADSL2+ Router User Guide 24 2. Click New Entry botton to add new e ntries, and the screen showed below pop up, you can modify an address reservation entry in this screen; Figure 3-27 3. Type the MAC Address(00:13:8F:A9:E6:CA for in stance) of the computer which you want to reserve an IP(192.
TD-8840 External ADSL2+ Router User Guide 25 7. Click Save/Reboot button to save the settings and reboot the router. ) Note: The function won't take effect until the router reboots.
TD-8840 External ADSL2+ Router User Guide 26 Figure 3-30 If you select Enable Automatic Assigned DNS , this Router will accept au tomatically the first received DNS assignment from one of PPPoA , PPPoE or MER/DHCP enabled PVC(s) during the connection establishment.
TD-8840 External ADSL2+ Router User Guide 27 you to alias a dynamic IP address to a static hos tname in any of the many domains, allowing your Router to be more easily accessed from various locations on the Internet. Figure 3-31 To setup DDNS, follow these instructions: 1.
TD-8840 External ADSL2+ Router User Guide 28 Figure 3-32 ) Note: This page allows you to add a Dynamic DNS address from DynDNS.org,TZO or No-IP . 2. Select D-DNS provider (DynDNS.org,TZO or No-IP) in the drop-down list. 3. Enter the Hostname of the DNS Server, and select the corresponding Interface for the DDNS, you can leave it default.
TD-8840 External ADSL2+ Router User Guide 29 1. The users of Windows XP can click the “ start->All Programs->Accessories-> Communications->New connection w izard ”, then click Next to enter the configuration page.
TD-8840 External ADSL2+ Router User Guide 30 Chapter 4. Advantage management setup In order to satisfy our customer's needs we offer an excelle nt Web management interface. Feel free to utilize the Advantage application and onli ne software upgrades.
TD-8840 External ADSL2+ Router User Guide 31 Appendix A: FAQ 1. What related parameters are requi red to acquire ISP when you want to access the internet by ADSL2+ Router? 1) Dial user: Connection prot ocol, User name, Password, Va lue of VPI/VCI, Encapsulation mode of AAL5 and so on.
TD-8840 External ADSL2+ Router User Guide 32 3) Whatever the setup of the IP address on y our computer (if you cl ose the DHCP function, you can't obtain the IP address automatically, must specify the IP address of your computer manually).
TD-8840 External ADSL2+ Router User Guide 33 Appendix B: Default Config User name admin Password admin IP Address 192.168.1.1.
TD-8840 External ADSL2+ Router User Guide 34 Appendix C: Contact Information For help with the installation or operation of TP-LINK Product, please visit our website.
Ein wichtiger Punkt beim Kauf des Geräts TP-Link TD-8840 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie TP-Link TD-8840 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für TP-Link TD-8840 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von TP-Link TD-8840 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über TP-Link TD-8840 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon TP-Link TD-8840 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von TP-Link TD-8840 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit TP-Link TD-8840. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei TP-Link TD-8840 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
