Benutzeranleitung / Produktwartung N900 TL-WR4900 des Produzenten TP-Link
Zur Seite of 144
TL -W DR4900 N900 Wireless Dual B and Gigabit Router Rev: 1.0.0 1910010 730.
COPYRIG HT & TRADEMARKS S pecifications are subject t o change without notice. is a registered trade mark of TP - LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered tradem arks of their res pective holders.
FCC S T A TEMENT This equipment has bee n tested and found t o comply with the lim its for a Class B digital device, pursuant to part 15 of the FCC Rules. Thes e limits are designed to provide r easonable protec tion against harmf ul interference i n a residential installation.
CE Mark W arn ing This is a class B product. In a domesti c environment, this product may caus e radio interfere nce, in which case the user m ay be required to take adequate m easures.
Canadian Compliance St atement This device compli es with Industry Canada l icense - exempt RSS standard(s). Operation i s subject to the following t wo conditions : (1) This device m ay not cause interfere nce, and (2) This device m ust accept any interferenc e, including interfe rence that may caus e undesired operation of the devic e.
Продукт сертифіковано згідно с правилами системи У крСЕПР О на відповідніс ть вимогам нормативних документів т а вимогам, що передб ачені чинними зак онодав чими ак тами Ук р а ї н и .
TP - LI NK TECHNOLOG IES CO., L TD TP- LINK TECHNOLOGIES CO., L TD. Building 24 (floors 1, 3 , 4, 5) , and 28 (floors 1 - 4 ) Central Science a nd T echnol ogy Park, Shennan Rd, Nanshan, Shenzhen, China DECL ARA TION OF CONFORMITY For the following equi pment: Product Descri ption: N 900 Wireless Du al Band Gigabit Rou ter Model No.
- I - CONTENTS Package Contents ..................................................................................................... 1 Chapter 1. Introduction ......................................................................................... 2 1.
- II - 4.7.1 Wireless Setti ngs .......................................................................................... 47 4.7.2 WPS ............................................................................................................. 49 4.
- III - 4.16 Bandwidth Cont rol .................................................................................................... 98 4.16.1 Control Settings ...........................................................................................
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 1 - Package Contents The following i tem s should be found in your package : TL -W DR4900 N 900 Wirel ess Dual Band Gigabit R outer DC P.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 2 - Chapter 1. Introduction 1.1 Overview of th e Router The TL -W DR4900 N 900 Wireless Dual Band Gigabi t Router integrates 4- port Switch, Firewall, N AT - Router and Wireless AP .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 3 - 1.2 Conventions The Router or TL -W DR4900 m ention ed in thi s guide s tands for TL - W DR4900 N 900 Wireles s Dual Band Gigabit Rout er without any expl anation . 1.3 Main Features Complies with IE EE 802.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 4 - 1.4 Panel Layout 1.4.1 The Front Panel Figure 1-1 LEDs on t he front panel The Router ’s LEDs are loc ated on the front panel (View from left to right) . Name St atus Indication ( Power ) Off Power is o ff .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 5 - ( WPS ) Slow Flash A wireless device is connect ing to the network by WPS function. T his process will last in the first 2 m inutes. On A wireless device has been success fully added to the network by WPS function .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 6 - Internet : This port is where you wi ll connect the DSL/cable Modem , or Ethernet . Ethernet (1 , 2, 3, 4 ): These ports ( 1 , 2, 3, 4 ) connect the Router to the lo cal P C(s) . WPS/ R eset : Pressing thi s button for less than 5 seconds enable s the WPS f unction.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 7 - Chapter 2. Connecting the Router 2.1 System Require ment s Broadband Internet Access Service (DSL/Cabl e/Ethernet) One DSL/Cable Mod.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 8 - 6. Connect the power adap ter to the power soc ket on the Ro uter , and t he other end into a n electrical out let, shown in Figure 2-1 . T he Route r will start to work automat ically . 7. Power on your Cable/DS L Modem.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 9 - Chapter 3. Quick Installation Guid e This chapter wil l show you how t o configure the bas ic functions of your N 900 Wireles s Dual Band Gigabit Rout er using Quick S etup Wiz ar d within m inutes.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 10 - If the resul t displayed is s imilar to F igure 3-2 , it means t he connection bet ween your PC and the Router failed . Figure 3-2 Failure res ult of Ping command Please check the conn ection follow ing these steps: 1.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 11 - 3.2 Quick Installation Guide With a Web - based utility , it is easy to configure and manage t he N 900 Wireless Dual Band Gigabit Router .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 12 - Figure 3-5 Quick Setup 3. Click Next , and then WAN Connecti on Type page will appear, shown in Figure 3-6. Figure 3-6 WAN Connect ion Type The Rout er provides Auto - Detect function and suppo rts three popular way s PPPoE , Dynamic IP , and Static IP and to connect to the Internet.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 13 - Figure 3-7 Quick Setup – Dynamic IP 2) I f the connect ion type detected is Sta tic IP , the next screen will appear as shown in Figure 3 -8 . Configure the f ollowing parameters and t hen click Next t o continue.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 14 - Figure 3-9 Quick Setup – PPPoE /Russia PPPoE User Name / Passwo rd - Enter the User Name a nd P assword provided by your ISP. These fields are c ase - sensi tive. If you have di fficulty wit h this process , please contac t your ISP.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 15 - Select Static IP if IP A ddress / S ubnet M ask / G ateway and DNS s erver address have been provided by your ISP . Then pleas e enter server IP address or domain name provided by your ISP , and also enter the corresponding parameters.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 16 - S elect Dynamic IP if none of the above parameter s are provide d. Then you jus t need to e nt er server IP address or domain name provided b y your ISP . 5. After finishing W AN Connection T ype selectio n, the Dual Band Selecti on page will appe ar as shown in Figure 3- 12 .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 17 - 6. Configure the basic parameters for 2.4GHz wirel ess network in the following screen as shown in Figure 3 - 13 , and then c lick Next . Figure 3- 13 Quick Setup – Wireless Wireless Radio - Dis plays whether the wireles s function i s enabled or not .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 18 - 11bg mixed - Selec t if you are using bot h 802.11b and 802.11g wireless cli ents. 11bgn m ixed - Select if you are usin g a mix of 802.11 b , 11g, and 11 n wireless clients. Channel Wi dth - Select any chan nel width from the drop - down list.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 19 - Figure 3- 14 Quick Setup – Wi reless Wireless Radio - Choose from the drop - down list to e nable o r disable the wirel ess radio. Wireless Network Name - Also called the SSID ( Service Set Identif ication ) .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 20 - Channel Wi dth - Select any chan nel width from the drop - down list. T he default set ting is “ Auto ” , which can adjust the c hannel width for your client s automatic ally. Channel - This fiel d determines which operati ng frequency will be used.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 21 - Chapter 4. Configuring the Route r This chapter wil l show each Web page's key functions and the c onfiguration way . 4.1 Login After your successful login, you will see the main menus on the left of the Web - based utility .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 22 - Figure 4-1 Router St atus 4.3 Quick Setup Please refer to 3. 2 Quick Installation Guide ..
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 23 - 4.4 Network Figure 4-2 the Network menu There ar e three submenu s under the Network me nu (shown in Figure 4-2 ): WA N , LAN and MAC Clone . Click any of them, and you wil l be able to configure t he corresponding function.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 24 - MTU Size - The normal MTU (Maximum T ransmission Unit) value for most Ethernet net works is 1500 Bytes . It is not recommended that you change t he default MTU S ize unless re quired by your ISP .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 25 - MTU Size - The normal MT U (Maximum T ransmission Unit) value for mos t Ethernet networks is 1500 Bytes . It is not recommended that you change t he default MTU Size unless required by yo ur ISP .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 26 - Connect on Demand - In this mode, the Internet connecti on can be terminat ed automatically after a specified inactivit y period ( Max Idle T ime ) and be re - establish ed when you attempt to access the Internet agai n.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 27 - MTU Size - The default M TU size is “ 1480 ” bytes, which is usually f ine . It is not recommended that you change the default MTU S ize unless required b y your ISP .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 28 - Auth Server - Enter the aut henticating s erver IP address or host name. Auth Domain - T ype in the domain suffix server name based on your loc ation . e.g. NSW / ACT - nsw .big pond.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 29 - Figure 4-8 WA N - L2 T P/Russia L2T P User Name/Passwo rd - Enter the Us er Name and Password provi ded by your ISP . These fields are case - s ensitive. Dynamic IP/ S t atic IP - Choose either as you are given by your ISP .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 30 - Connect Manua lly - Y ou can c onfigure the Router to make it connect or disconnect manually .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 31 - Dynamic IP/ S t atic IP - Choose eith er as you are given by your I SP and enter the ISP’s IP address or the domain na me. If you choose static IP and enter the domain name, you should also ent er the DNS assigned by your ISP .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 32 - Stati c IP - Connections whic h use static IP address assignment. The Router cannot detec t PPTP/L2TP/Big Pond connections with your ISP. If your ISP uses one of these protoc ols, then you mus t configure your connection manually.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 33 - Figure 4- 11 MAC Addres s Clone Some ISPs require t hat you register the M AC Address of your adapter . Changes are ra rel y needed here . WAN MAC Address - This fi eld displays the current MA C address of the Internet port .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 34 - Concurrently w ith 2.4GHz and 5GHz (802. 1 1a/b/ g/n) - Choose this option, and then the Router will work concurrently in 2. 4GHz and 5GHz frequenc y . Only work in 2.4GHz (80 2.1 1b/g/n) - Choose this option, and then the Rout er will only work in 2.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 35 - Figure 4- 14 Wireles s Settings – 2. 4GHz Wireless Network Nam e - Also called the SSID ( Service Set I d entificat ion ) . Enter a valu e of up to 32 characters. The same name must be assigned to all wireles s devices in your network.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 36 - 11n only - Select only if all of your wirel ess clients are 802.11n . When 802.11n mode is selected , onl y 802.11n wireless stations can c onnect to the Router . 11bg mixed - Select if you are using both 802.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 37 - Key type - T his option shoul d be chosen accordi ng to the AP's security configurat ion. It is recommended that the security t ype is the same as your AP's s ecurity type WEP Index - This option should be chosen if the key type is WEP(ASCI I) or WEP(HEX) .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 38 - Note: To build a successful c onnection by WPS , you should also do the c orresponding c onfiguration of the new device f or WPS function meanwhile. I. Use the Wi - Fi Pr otected Setup Button Use this method if your c lient device has a WPS button .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 39 - Figure 4- 19 Add A New Devic e Step 2: E nter the PIN number from the client device in t he field on the WPS screen above .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 40 - Figure 4- 20 Wireles s Security Disable Securit y - If you do not want to use wireless security, check t his radio button. But it ’ s strongly recom mended to choose one of the f ollowing modes to enable secur ity.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 41 - Figure 4- 21 W PA /WP A2 – Personal • PSK Pass word - You can enter A SCII characters between 8 and 63 c haracters or 8 to 64 Hexadecimal characters.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 42 - Figure 4- 23 WEP • Typ e - you can choose the type for t he WEP security on the drop - down list . The default setting is A utomati c , which can select Shared Key or Open System aut hentication type automaticall y based on the wireless s tation's capabili ty and request.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 43 - Figure 4- 24 Wireles s MAC Filtering T o filter wirel ess users by MAC Address, click Enable . The default setting is Disable d . MAC Address - The wireless station's MA C address that you want to filter .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 44 - T o modify or delete an exi sting entry: 1. Click the Modify in the entry you wa nt to modify . If you want to del ete the entry , click the Delete . 2. Modify the inf orm ation. 3. Click the Save button.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 45 - 4.6.5 Wireless Advanced Choose menu “ Wireless 2.4GHz → Wireless Advance d ” , you can configure t he advanced settings of your wirel ess network. Figure 4- 26 Wireles s Advanced Transmit Pow er - Here you can s pecify the transmit power of Router .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 46 - Enable Short GI - This functi on is recommended for it will increase the data capac ity by reducing the guar d interval time . E nabled AP Isol ation - This funct ion can isolate wireless stations on your net work from each other.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 47 - 4.7 Wireless 5GHz Figure 4- 28 Wireles s menu There are six submenus under the Wireles s menu (shown i n Figure 4- 13 ): Wireless Settings , WPS , Wireless Securi ty , Wireless MAC Fi ltering , Wireless Advanced and Wireles s St atistics .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 48 - Region - Select your region from the drop - down list. This field s pecifies the region where th e wireless functi on of the Router can be used. It may be illegal to use the wireless func tion of the Router in a regi on other than one of those spec ified in this field.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 49 - E nable WDS Bridging - Check this box to enabl e WDS . W i th this function, the Rout er can bridge two or more W LAN s . If t his checkbox is selected, you wi ll have to s et the followin g parameters as shown in Figure 4- 30 .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 50 - Figure 4- 31 WPS WPS St atus - Enable or disable the WPS funct ion here. Curre nt PIN - The current value of the Router 's PIN is displayed here. The default PIN of the Router can be found i n the label or User Guide.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 51 - Figure 4- 33 Add A New Device Step 2: Press and hol d the WPS button of the c lient device di rectly . Step 3: The Wi - Fi Pr otected Setup LED f lashes for t wo minutes during t he Wi - Fi Prot ected Setup process.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 52 - Step 3: When the WPS LE D is on, the client device has successful ly connected to the Route r . Note: 1) The WPS LED on the Router will light green f or five minutes if the devic e has been successful ly added to the network.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 53 - W PA / W PA 2 - P ersonal - It ’s th e WPA/WPA 2 authentication type base d on pre - sh ared passphrase. T he Rout er is confi gured by this security t ype by default. • V ersion - you can choos e the version of the WPA - PSK security on the drop - down list.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 54 - Figure 4- 37 WP A/WP A2 - Enterprise • Radius Server IP - Enter the IP address of the Radius s erver. • Radius Port - Enter the port number of the Radius server . • Radius Password - Enter the password for the R adius s erver.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 55 - 64 - bit - You can enter 10 hexadecimal digit s (any combination of 0 - 9, a- f, A - F, zero key is not promoted) or 5 ASC II c haracters. 128 - bit - You can enter 26 hexadecimal digi ts (any combination of 0 - 9, a - f, A - F, zero key is not prom o ted) or 13 AS CII characters .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 56 - Figure 4- 40 Add or Modify Wireless MAC Address Filtering entr y To add or modify a MAC Address F iltering entr y, follow these instruction s: 1. Enter the appropriat e MAC Address into t he MAC Address field.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 57 - 3. Delete all or disabl e all entries i f there are any entries al ready. 4. Click the Add New ... button . 5. E nter the MAC address 00 - 0A - EB -B0-00- 0B/00 - 0A - EB - 00 - 07 - 5F in the MAC Address field .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 58 - RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. I f the packet is larger than the s pecified RTS Thr eshold size, the Router will s end RTS f rames t o a particular receivi ng station and negoti ate the sending of a data frame.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 59 - MAC Address - The c onnected wireles s station's MAC addres s Current Status - T he connected wi reless station's r unnin.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 60 - Figure 4- 44 DHCP Settings DHCP Server - E nable or Disable the DHCP server . If you disable the Server , you must have another DHCP server within yo ur network or else you m ust configure the c omputer manually .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 61 - Figure 4- 45 DHCP Clients List Client Name - The name of the DHCP client MAC Address - The MAC addr ess of the DHCP client Assign ed IP - The IP addres s that the Router h as allocated t o the DHCP client Lease Time - The time of the DHCP client leased.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 62 - 3. Click the Save button. Figure 4- 47 Add or Modify an Addr ess Reservation Entry To modify or delete an exi sting ent ry: 1. Click the Modify in the entry you wa nt to modify . If you want to del ete the entry , click the Delete .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 63 - Figure 4- 49 S torage Sharing Service Status - Indicates the Network Sharing service's current status. Y ou can c lick the Start button to s tart the Storage Sharing servi ce and cli ck the Stop butt on to stop it .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 64 - 1. Plug an external USB hard disk drive or US B flash drive into thi s Router. 2. Click the Rescan button to f ind the USB drive that has been attached to t he Router. 3. Click the Start button to start the Storage Sharing s ervice.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 65 - Partit ion - The volume t hat the folder res ides . Volume 1 - 8 is mapping to USB port 1, and Volume 9 - 16 is mapping t o USB port2. Folder - The real full path of the spec ified folder.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 66 - Note: 1. The max share folders nu mber is 10. If you want to share a new folder when the numbe r has reached 10, you can delete an existi ng share folder and then a dd a new one.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 67 - 2. Click the Start button to start the media server, and then the screen will appear as shown in Figure 4- 55 . Figure 4- 55 Media S erver Setting 3. Click the Add share folder button to s pecify a folder as the s earch path of media s erver.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 68 - Back - C lick th is button to dis card the setti ngs and just go to the medi a server configurati on page.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 69 - Figure 4- 58 User Ac count Management Only Adminis trator can use a Web browser to tra nsfer the fil es from a PC to the Writable shared volume on the USB dri ve. T o add a new user account, please fol low the steps belo w : 1.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 70 - Confirm Password - Re - enter t he password here. Storage Author ity – Choose Read and Wri te or Read Only from t he d rop - down lis t to assign access authority of Storage S haring to the us er.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 71 - 4.11 Forwarding Figure 4- 61 The Forwarding menu There are four subm enus under the Forwar ding menu (show n in Figure 4 - 61): Virtual Servers , Port T ri ggering , DMZ and UPnP . Clic k any of them, and you wil l be able to confi gure the correspondin g function.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 72 - Protocol - The protocol used for this application, eit her TCP , UDP , or All (all protocols supported by t he Router). St atus - The status of this entry , "Enabled" means the virt ual server entry is enabled.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 73 - Click the Next but ton to go to the next pag e and c lick the Previous butt on to return to the previous page.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 74 - Figure 4- 65 Add or Modify a T riggering Entry T rigger Port - The port for outgoing tr affic.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 75 - Once the Router i s configured, the operation is as follow s: 1. A loc al host makes an outgoing connect ion to an external hos t using a desti nation port number defined in the T rigger Port field.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 76 - 4.11.4 UPnP Choose menu “ Forwarding → UPnP ” , and then yo u can view the information about UPnP in the screen (shown in Figure 4- 67).
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 77 - 4.12 Security Figure 4- 68 The Security menu There are four subm enus under the Securi ty menu as shown i n Figure 4- 68 : Basic Secu rity , Advanced Securit y , Loc al Management and Remote Management .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 78 - VPN - VPN Pass through must be enabl ed if you want to allow VPN tu nnels using V PN protocols to pass through the Router. PPTP Passthrough - Point - to - Point Tunneling P rotocol (PP TP) allows the Point - to - Point P rotocol (PPP) to be tunneled thr ough an IP network.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 79 - Figure 4- 70 Advanced Security Packets Statisti cs Interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop - dow n list. The Pack ets S tatistic s I nterval value indi cates the tim e section of the packets statistic s .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 80 - Enable TCP - SYN - FLOOD Attack Filtering - Enable or Dis able the TCP - SYN - FLOOD Attack Filteri ng. TCP - SYN - FLOOD Packets T hreshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 81 - use the password to browse t he built - in web pages t o perform Administrator tas ks while all the others will be bloc ked. After click th e Add button, your PC's M AC Address will be placed in the l ist above.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 82 - 4.13 Parent al Control C hoose menu “ Parental Control ” , and then you can c onfigure the parental control in the sc reen as shown in Fi gure 4- 73 .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 83 - Parental Contro l - Check Enable if you want t his function to take effect ; otherwise , check Disable . MAC Addre ss of Parental PC - In this f ield, enter the MAC address of the controlling PC , or you can make use of t he Copy To Above button below.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 84 - 1. Click “ Parental Control ” menu on the left to enter the Parental Control S ettings page. Check Enable and enter the M AC address 00 - 11 - 22 - 33 - 44 - BB in the MAC Address of Parental PC field.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 85 - 4.14.1 R ule C hoose menu “ Ac cess Control → Rule ” , and then you can view and set Access Control rules i n the screen as s hown in Figure 4- 77 .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 86 - Click the Next button to go to the nex t page . C lick the P revious button t o return to the previous page. T here are tw o methods to add a new rule . Method One: 1. Click Setup Wizard but ton and the next screen wi ll appear as shown in Figu re 4- 78 .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 87 - Figure 4- 79 Quick Setup – Create an Access T arget Entry Targ et Description - In this f ield, create a descript ion for the target. Note that this description should be u nique (e.g.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 88 - Fi gure 4- 80 Quick S etup – Create an A dvanced Schedule E ntry Sch edule Description - In this field, create a desc ription for the schedul e. Note that this description should be u nique (e.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 89 - Host - In t his field, selec t a host from the drop - do wn list for the rule. T he default value i s the Host Descripti on you set just now. Targ et - In this filed, sel ect a target from the drop - d own list for the rule.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 90 - 1. Click the s ub menu Rule of Access Control in the left to return to the Rule List page. Select Enable Internet Acc ess Control and choose "Al low the packets speci fied by any enabled access control pol icy to pass through t he Router".
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 91 - Host Descrip tion - Here displays the description of the host and this des cription is unique . Information - Here displays the i nformation about t he host. It can be IP or MA C. Modify - To modify or delete an exis ting entry.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 92 - 1. Click Add New... button in Figure 4- 83 to enter the Add or Modify a Host Entry page. 2. In Mode field, select MAC Address from the drop - d own list. 3. In Host Descrip tion field, c reate a unique description for the hos t (e.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 93 - Figure 4- 87 Add or Modify an Ac cess T arget Entry 1) In Target Descri ption field, c reate a unique descri ption for the target (e. g. Target_1). 2) I n IP Address fi eld, enter the IP addres s of the target.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 94 - Click the Next button to go to the next page, or c lick the Previous button t o return to the previo us page. For example : If you des ire to restrict the internet ac tivities of host with MA C address 00 - 11 - 22 - 33 - 44 - AA in the LAN to acc ess www.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 95 - 2. In Schedule Descri ption field, create a uni que descript ion for the schedul e (e.g. Schedule_1) . 3. In Day field, s elect the day or days you need. 4. In T ime fi eld, you can select all day - 24 hours or you may ent er the Start Time and Stop Tim e in the correspondin g field.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 96 - 4.15 Advanced Routing Figure 4- 91 Advanced Routing There are two submenus under t he Advanced Routi ng menu as shown in Figu re 4- 91 : St atic Routing List and System Rout ing T able . Click any of them, and you will be able to configure the correspondin g function.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 97 - Subnet Mask - The Subnet Mask determi nes which portion of an IP Address is the network portion, and which portion is the host portion. Default Gateway - This is the IP Address of the gatewa y device that all ows for contact between the Router a nd the network or host .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 98 - Interface - This int erface tells you ei t her the Destination IP Addres s is on the LAN & WLAN (internal wire d and wireless networks), or on the WAN (Internet).
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 99 - Figure 4- 97 Bandwidth Cont rol Rules List Description - This is t he information about the rul es such as address range . Egress bandw idth - This field di splays t he max and mix upload bandwi dth through the Internet port , t he defaul t is 0.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 100 - There are two subm enus under the IP &MAC Binding menu (s hown in F igure 4- 99 ): Bind ing Setting s and ARP List . Click any of them, and you will be abl e to scan or confi gure the correspondin g function.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 101 - 4. Click the Save button to save it . To modify or delete an exi sting entry, fol low the steps below . 1. Find the desired entr y in the table. 2. Click Modify or Delete as desired on t he Modify column.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 102 - Load - Load the item to the IP & MA C Binding list. Delete - Delete the i tem. Click the Bind All butt on to bind all the current it ems, available after enabl e. Click the Load All button to l oad all items to the IP & MAC B inding list.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 103 - Figure 4- 104 Comexe. cn DDNS Settings To set up for DDNS, fol low these instructions: 1. Enter the Domain Name your dynamic DNS service provider gave. 2. Enter the User Name f or your DDNS account.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 104 - Figure 4- 105 Dyndns .org DDNS Setti ngs To set up for DDNS, fol low these instruct ions: 1. Enter the User Name f or your DDNS account. 2. Enter the Passw ord for your DDNS acc ount. 3. Enter the Domain Name you received from dynamic DNS service provi der .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 10 5 - Figure 4- 106 No - ip. com DDNS Sett ings To set up for DDNS, fol low these instruct ions: 1. Enter the User Name f or your DDNS account. 2. Enter the Passw ord for your DDNS acc ount. 3. Enter the Domain Name you received from dynamic DNS service provi der .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 106 - 4.19.1 IPv6 Status Figure 4- 108 I Pv6 S t atus The IP v6 Status page dis plays the Router's current I Pv6 status and configuration.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 107 - 4.19.2 IPv6 Setup Figure 4- 109 E nable/Disable IPv6 Enable IPv6 - T ick the checkbox to enable the IPv6 func tion. It ’ s enabled by default. W AN Conne ction T yp e - Choos e the correct WAN connection type based on your ISP network t opology .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 108 - 1) DHCPv6 Figure 4- 11 0 DHCPv6 Get non - temporar y IPv6 address - Get a non - temporary I Pv6 address from the I SP.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 109 - Get IPv6 with Unicast DHCP - A few ISPs' DHCP servers do not support the bro adcast applications. If you can't get the IP v6 Address normall y , you can choose Uni cast. (Y ou generally need not t o check thi s option).
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 11 0 - MTU Size - T he normal MTU (Maximum Trans mission Unit) value f or most Ethernet network s is 1500 Bytes . For some ISPs, you may ne ed to modify the MTU. But this is rarely required, and should not be done u nless you are sure it is neces sary for your ISP c onnection.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 111 - Get IPv6 Address Wa y Get non - tempora ry IPv6 address - Get a non - tem porary IPv6 addr ess by DHCPv6 fro m the ISP.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 11 2 - 4) T unnel 6to4 Figure 4- 11 3 T unnel 6to4 Address /Subnet M ask/Default Gat eway - the I Pv4 address/ subnet mask/ default gateway assigned , in dott ed - decima l notation .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 11 3 - DHCPv6 Server • Release Time - the length of time a network us er will be allowed to keep connect ing to the Router with the current DHCPv6 Addres s. Enter the amount of t ime (in seconds) that the DHCPv6 address will be leased.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 11 4 - Figure 4- 11 5 T ime settings Time Zone - Select your loc al time zone from thi s pull down list. Date - Enter your loc al date in MM/ DD/YY into the right blanks. Time - Enter your local time in HH/MM/S S into the right blanks.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 11 5 - To set ti me automatically: 1. Select your local time zone. 2. Enter the address or dom ain of the NTP Server I or NTP Server II . 3. Click the Get GMT button to get system time from I nternet if you have connected to t he Internet.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 11 6 - Figure 4- 11 7 Diagnostic T ools Diagnostic T ool - Check the radio button t o select one diagnost ic too. Ping - This diagnosti c tool troubleshoots connect ivity , reachabilit y , and name resolution to a given host or gateway .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 11 7 - T he Diagnostic Resu lt s page displays the resul t of diagnosis. I f the result is simi lar to the following sc reen, the connectivit y of the Internet is f i ne. Figure 4- 11 8 Diagnostic Results Note: 1.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 11 8 - 3. Click the Upgrade button. 4. The Router will reboot while the upgrading has been finished. Note: 1) New firmware vers ions are posted at www.tp - li nk.com and can be downloaded for free.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 11 9 - 4.20.5 Backup & Restore Choose menu “ Sy stem T ools → Backu p & Restore ” , and then you can save the current configuration of the Router as a back up file and rest ore the configuratio n via a backup file as shown in Figure 4- 121 .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 120 - C hange the Web Management P ort. Upgrade the firm ware of the Router (sys tem will reboot autom atically). Restore the Router's settings to factory default s (sys tem will reboot autom atically).
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 121 - Figure 4- 124 S ystem Log Auto Mail Feature - I ndicates whet her auto mail feature i s enabled or not.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 122 - Note: O nly when you selec t Authentication , do you have to enter th e User Name and Pass word in the following fi elds. User Name - Your mail ac count name filled i n the From field.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 123 - Figure 4- 126 S tatistic s Current Statistics Statu s - Enable or Di sable. The default value is dis abled. To enable it , click the Ena ble button. I f it is disabled, the func tion of DoS protecti on in Security setti ngs will be disabled.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 124 - Statistics Tabl e: IP /MAC Address The I P and MAC a ddres s are displ ayed with related statistics . Total Packets The total number of packets received and tra nsmitted by the Router. Byt es The total number of bytes received and t ransmitted by the Router.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 125 - Appendix A: FAQ 1. How do I configure the Ro uter to access Interne t by ADSL users? 1) First, confi gure the ADS L Modem configured in RFC148 3 bridge model. 2) Connect the E thernet cable from your ADSL Modem to the Internet port on the Rout er .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 126 - 2. How do I configure the Ro uter to access Interne t by Ethernet users? 1) Login to the Router , click the “Netw ork” menu on t he left of your browser , and click "W AN" submenu.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 127 - Figure A - 5 Add or Modify a Virtual server Entry Note: Your opposite s ide should call your WA N IP, which is displ ayed on the “Status ” page.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 128 - Figure A -7 Basi c Security 4. I want to build a WEB S erver on the LAN, w hat should I do? 1) Because the WEB S erver port 80 will interfere wi th the WEB management port 80 on the Router , you must change the WEB management port number to avoid int erference.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 129 - field of the Web browser. If the LAN IP of the modem connected with your rout er is 192.168. 0 .x , the default LAN IP of the Router will automaticall y switch from 192.168. 0 .1 to 192.168.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 130 - Appendix B: Config uring the PCs In this section, we ’ l l introduce how to install and configure the TCP/ IP correctly in Windows XP . First make sure your E thernet A dapter is working, refer to the adapter ’ s manual if needed.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 131 - 5) The followin g TC P/IP Propertie s win dow will display and t he IP Address tab is open on this window b y default .
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 132 - Appendix C: Speci fications General St a n dards IEEE 802.1 1n , IEEE 802.1 1g , IEEE 802.1 1b , IEEE 802.1 1a , IEEE 802.1 1e , IE EE 802.1 1i , IEEE 802.1X , IEEE 802.3X , IEEE 802.3 , IEEE 802.
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 133 - Appendix D: Glos sary 802.11n - 802.11n bui lds upon previous 802.11 standards b y adding MIMO (m ultiple - input multiple - output).
TL -W DR4900 N 900 Wireless Dual Ban d Gigabit Router - 134 - SSID - A S ervice S et Id ent ification i s a thirty - two charac ter (maximum) alphanumeric key identifying a wi reless local area ne twork. For the wireles s devices in a net work to communicate wit h each other, all devices must be configured wi th the same SSID.
Ein wichtiger Punkt beim Kauf des Geräts TP-Link N900 TL-WR4900 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie TP-Link N900 TL-WR4900 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für TP-Link N900 TL-WR4900 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von TP-Link N900 TL-WR4900 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über TP-Link N900 TL-WR4900 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon TP-Link N900 TL-WR4900 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von TP-Link N900 TL-WR4900 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit TP-Link N900 TL-WR4900. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei TP-Link N900 TL-WR4900 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
