Benutzeranleitung / Produktwartung Archer C9 des Produzenten TP-Link
Zur Seite of 143
Archer C 9 AC1900 Wireless Dual Band Gigabit Router R EV1.0.0 191001 1 101.
COPYRIGH T & TR A DEM ARKS S pecif ications are subject to change without notice. is a registered trade mark of TP - LINK TECHNOLOGIES C O., L TD . Other br ands and produ ct names ar e trademarks or registered t rademar k s of their res pective hold ers.
FCC ST A TEMENT This equi pment has been tested and f ound to co mply with the limits fo r a Clas s B digit al device, pursuant t o part 15 of the FCC Rules. These l imits ar e designed to prov ide reasonable pr otection against har mful interfere nce in a resident ial insta llation.
CE Mark W ar ning This is a class B pr oduct. In a domesti c environment, this product may caus e radio interferenc e, in which case the us er may be requ ired to ta ke adequate me asures.
Luxembourg None General auth orization r equired for n etwork an d service supply (not f or spectrum) Russian F ederation No info 5250 - 535 0 MHz Country R estriction Reason/r emark Bulgaria Not impl.
Canad ian Com pliance S t atemen t This device c omplies with Industry Cana da license - exe mpt RSS st andard(s). O peration is subject to the follow ing two condit ions: (1) This device may not cause interferenc e, and (2) This device must accept any interferenc e, including interf erence that may cause und esired operation o f the device.
頻電機需忍受合 法通信或工業、 科學以及醫療用電 波輻射性電機設 備之干擾。 減少電磁波影響 ，請妥適使用。 安全諮詢及注意事項 ●請使用原裝電.
TP - LINK TECHNOLOGIES CO., L T D DECL ARA TION OF CO NFORMIT Y For the follow ing equipme nt: Product Des cription: A C1900 Wireles s Dual Band Gi gabit Router Model No.
CONTENTS Package C ontent s ..................................................................................................... 1 Chapt er 1. Introduction ......................................................................................... 2 1.
5.4.5 Wireless Adv anced ......................................................................................... 45 5.4.6 W irel ess Statist ics ........................................................................................... 46 5.5 W irel ess 5 GH z .
5.14.1 S tat ic Routing List ........................................................................................... 91 5.14.2 Sy stem Routing T a ble ..................................................................................... 92 5.15 Ban dwidth Co ntrol .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Package Contents The follow ing items shou ld be found in your p ackage: Archer C9 A C 1900 W ireless Dual Band Gigabit Rou ter DC Power.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Chapter 1. Introduction 1.1 Over vi ew of t he r out e r The Archer C9 AC1900 Wire less Dual Band Gig abit Router integrates 4- port Switch , Firew all, N AT - router and W ireless AP .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 1.3 Main Fea tures Complies with IE EE 802.1 1 ac . One 10/100 /100 0M Au to - Negot iation RJ45 Internet port, four 10/100 /10 00M Au to - N ego tia tion RJ 45 Ethernet port s, supportin g Auto MDI/MD IX.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 1.4 Panel Layout 1.4.1 The Front Panel The router ’s LE Ds are located on the fr ont panel (V iew from l eft to rig ht) . Na me S ta t u s Indica tion (Power) Fl ashi ng The router is booting or upgrad i ng.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router ( USB 1) Fl ashi ng The router is identifying th e device connect ed to the USB 2 .0 port. On The device is identified suc cessfully . Off No devi ce is connected t o the USB 2 .0 port . ( USB 2) Fl ashi ng The router is identifying th e device connec ted to the USB 3.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router button to quic kly estab lish a connection bet ween the router and client devices a nd automati cally configure w ireless secur ity for your w ireless network. Pressing t his button for more than 5 seconds en ables the Reset funct ion.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Chapter 2. Connecting the r outer 2.1 System Requirement s Broadban d Internet Access Service (D SL/Cable/ Ethernet) One DSL/ Cable Mode.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 2-1 Hardware Ins tallation Figure 2-2 USB Ins ta llatio n No te: If you want to use the rout er to share files or print er , plug the USB stor age device to the USB port or connect the printer to th e router with a m atching cable.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Chapter 3. Quick S etu p 1. Set up t he TCP/IP Prot ocol in " Obt ain an IP addr ess aut omatically " mode on your PC. If you need inst ructions as t o how to do this, pleas e refer to Appendix B: Configuring the P C .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 4. T hen WA N Connection T ype page will appear as shown below . Sel ect your connec tion type if you know what it is or c lick Aut o Detect button ; th en follow the instr uction s t o continue.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router St atic IP Figure 3-6 W AN Connection Type IP A ddress - Enter t he IP address int o this fie ld. Subnet Mask - Enter t he subnet mas k into this field. It is usually 255.2 55.255.0. Default Gateway - Enter the gat eway IP addres s into t his f ield .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router L2TP Figure 3-8 W AN Connection Type VPN Serv er IP/ D omain N a me - Enter the serv er IP address/na me provided by your ISP. Use rn ame - Enter the usernam e provided by your ISP. Th is field is case - sensi ti ve.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router PP TP Figure 3-9 W AN Connection Type VPN Server IP/Do ma in Name - Enter the ser ver IP addres s/name prov ided by your I SP. User n ame - Enter the usernam e provid ed by your ISP. Th is field is case - sens it ive .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Wirel ess 2.4GHz/5G Hz - Disp lays whether the w ireless functi on is enabled or not . Network Nam e (SSI D) - Also called the SSID (Serv ice Set Identificat ion). Enter a value of up to 32 charac ters.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Chapter 4. Basic 4.1 Network Map Network Map provides a router - centered dashboard that let s you see the st atus of your Internet connection and network at a glance. Y ou can cli ck any of the six sections of the dashboard to view the d etai l information.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 4-2 I nternet 1. If y our ISP provides the DHCP serv ice, please choose D ynamic IP type , and the router w ill automati cally get IP para meters from y our ISP. Yo u can see the page as shown below .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Primary/Secondary DNS - If your I SP gives you one or t wo DNS addresses, select Use These DNS Serv ers a nd enter the pr imary and secondary addresses int o the correct fields. Otherw ise, the DNS server s will be assigned dy namically from your ISP .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 4-5 PPPoE User Name/ Password - Enter the User Name and Passw ord provided by your ISP . These fields are cas e - se nsi ti ve. Clic k the Conne ct button to connect immediat ely . Click the Disconnect button to dis connect i mmediately .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5. If y our ISP prov ides PPTP connectio n, please selec t PPTP/Russi a PPTP option. And you should ent er the following p arameters ( Figure 5-8). Figure 4-7 PPTP /Rus sia PPTP VPN Serv er IP/Domain Name - Enter t he IP addre ss or domain na me of your VPN serv er .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 4.3 Wire less Choosing menu “ Basic → Wirel ess ”, you can config ure the basic settings f or the wireless networ k including 2. 4GHz and 5GHz . Figure 4-8 W irel ess Se tti ng Wi reless 2.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 4-9 F ile Sharing Device Setting - Cli ck t he S can butt on to display the i nfo rmat ion of the USB storage d evice connected t o the rout er. Click the Saf ely Remov e button to remove the U SB storage device safely f rom th e router.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router ii. Enter ftp://192.168 .0.1:21 in the dialog bo x and click the OK but ton. 3) FTP (Remot e): This method is d i sabl ed by defau lt. If you select t his check bo x, remote users can access the USB drive t hrough FTP ov er the Internet .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Allo w Guest Network A c cess - If this checkbox is sele cted, guest s are allowed t o access the shar ing file. Enable Authe ntication - If this checkbox is selected, then the file shar ing is need authent ication .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 4- 12 Guest Network All ow G uest s T o S ee E ach O ther - If ON is sele cted, anyone who co nnect s to the g uest n etwor k can a cce ss each other .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Chapter 5. Advanced 5.1 Sta t us Choose menu “ A d va nc ed → Sta t us ”, you can see the c urrent stat us informatio n about the router .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.2 Ne tw or k Figure 5-2 t he Network menu There are thre e submenus under the Network men u as shown in Figure 5-2 : WA N , M AC Clone , and L AN . Click any o f them, and you wi ll be ab le to configure the corre spondi ng function.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router MTU S ize - The normal MTU (Maximum Tr ansmission Un it) value for most Ethernet networks is 1500 Byt es. It is not recommen ded that you chan ge the default M TU Si ze unless require d by y our ISP .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router MTU Si ze - The norm al MTU (Maxi mum T ransmissi on Unit) value for most Et hernet networ k s is 1500 Byt es. It is not recommen ded that you chan ge the defa ult MT U S ize unless required by y our ISP .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router St atic IP - Y ou can check this radi o button to use S tatic IP as the secondary connection to connect to the local area net work provided by ISP .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5-6 P PPoE Advanc ed Settings MTU Size - The default MTU s ize is “1480” bytes, which is usually fi ne . It i s not recomme nded that you c hange the default MT U Size unless req uired by your ISP .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5-7 WAN - L2 T P/R ussia L2TP VPN Serv er IP/Domai n Name - Enter the IP add ress or domain n ame of the VPN s erver provided by your ISP . User Name/P assword - Enter the User Name and Passw ord provided by your ISP .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Connect Automat ically - Connect a utomatically after the r outer is disconnect ed. T o use this option, chec k the radio bu tton. Conne ct M anua lly - Y ou can configur e the ro uter to make it con nec t or dis conn ec t man ual ly .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router VPN Serv er IP/Domai n Name - Enter the IP add ress or domain n ame of the VPN s erver provided by your ISP . User Name/P assword - Enter the User Name and Passw ord provided by your ISP .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router S tatic IP - Connections w hich use static I P address assi gnment. The router cannot detect PPTP/L2T P connections w ith your ISP. If your ISP uses one of thes e protocols, then you must c onfigure your connection manua lly.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 10 LAN M AC Ad d r e s s - The physical ad dress of the rout er , as seen from th e LAN. The v alue can't be change d. IP A ddress - Enter the IP addres s of your router or reset it in dotte d - decimal n otation (factory def ault: 192.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.4 Wire less 2 .4G Hz Figure 5- 12 W irele ss m enu There are six submenus under t he Wireless menu , shown in Figure 5- 12 : Wirel ess Settings , WPS , Wirel ess Security , Wireless M AC Filter ing , Wir eless Adv anced and W ireless St atistics .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router wireless features of the r outer in so me parts of th e world. If your country or regio n is not listed, ple ase contact your local governme nt agency for ass istance. Mode - Select the des ired mode.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router MAC A ddress (to be bri dged) - T he MAC addr ess ( BSSID ) of the AP your r outer is going to conne ct to as a client. You can als o use the Survey function to select t he MA C address ( BS SID ) t o join.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Use this metho d if your client dev ice has a WP S button. Ste p 1: Press the WPS /Reset but ton on the back p anel of the router . Ste p 2: Press and hold the WPS button of the client device. The W PS LED fla shes for two minutes duri ng the Wi - Fi Prot ected Setup pr ocess.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 17 W irele ss S ecur ity Disable Securit y - If you do not want to use wireless security , check this radio butt on. But it’s strongly r ecommended t o choose one of the fo llowing modes to en able securit y.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 18 W PA / W PA 2 – Personal Wirel ess Pass word - Y ou can enter ASCII charact ers betwee n 8 and 63 c haracters or 8 to 64 Hexadecim al characters.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Grou p Key Up date Peri od - Spec ify the group key update interv al in seconds . The value shoul d be 30 or abov e. Enter 0 to disa ble the update. WEP - It is based on the IEEE 802.11 stan dard.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.4.4 W ireless MA C Filtering Choose menu “ A dvanced → Wireless 2.4GHz → W ireless M AC Filtering ” , you can control the wireless acc ess by config uring the Wireless M AC Filterin g function, shown in Figure 5- 21 .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 3. Sele ct Enabled or Disabled for this entry on t he S tat u s dr op - down list . 4. Clic k the Save button to sav e this entry . T o modify or delete an e xisti ng entry : 1. Clic k the Mo dify in the entry y ou want to modify .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.4.5 Wireless A dvanced Choose menu “ Advan ced → Wireless 2.4GHz → W ireless A dvanced ”, you can configure the advanced s ettings of your w ireless networ k . Figure 5- 23 W irele ss A dva nc ed Transmit Power - Here you ca n specify t he trans mit power of r outer .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router broadcast and multicast messa ges. When the router has buffered broadca st or multicast messages for associate d clients, it sends the ne xt DTIM with a DTIM Interv al value. You can spe ci fy the value between 1 - 25 5 Beacon Interv als.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router If the numbers of con nected wireless stations go bey ond one page, click the Next button to go t o the next pag e and click the Pr evious b utton to retur n the previous page. No te: This page w ill be refreshed aut omatically every 5 seconds.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router TP - LINK _ XXXX _5G . This v alue is case - sensitiv e. For example, TE ST is NOT t he same as test . Regi on - The geographic region w here the router is being use d. This f iel d s pe cif ies the region where t he wireless function of the r outer can be used.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router MAC A ddress (to be br idged) - The MAC addres s ( BSSID ) of the AP your rout er is going to conn ect to as a client . You can also use th e Survey function to selec t the MAC address ( BS SID ) t o join.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router If the wireless adapter support s Wi - Fi Protected Setup ( W PS), you can e stablish a w ireless connectio n between wireless adapt er and router using either Push Button Configurat ion (PBC) method or PI N m ethod.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.5.3 Wireless Secu rity Choose menu “ A dvanced → Wirel ess 5GHz → Wirel ess Security ” , you can configure the sec urity settings of y our wireless net work.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router No te: If you chec k the W PA / W PA 2 - Personal radio button and choose TKIP encryption, you will find a notice in r ed as shown in F igure 5- 31 .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Radius Serv er IP - Enter the IP addr ess of t he Radius serv er. Radius Por t - Enter the port number of the Radi us server. Radius Pa sswor d - Enter the passwor d for the Radi us server.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router No te: If you do not set the key , the wirele ss security funct ion is still disable d even if you hav e selected S hared Key as Authentication T ype. Be sure to clic k the Save button to sav e your sett ings on this page.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 1. Enter t he appropriate MA C Address into the M AC Ad d re ss field. The format of the M AC Address is XX - XX - XX -XX- XX - XX (X is any hexadecima l digit). For exampl e: 00 - 0A - EB - B0 - 00 - 0B.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.5.5 Wireless A dvanced Choose menu “ Advan ced → Wireless → Wirel ess Advanced ”, you can configure the advanced settings of y our wireless net work. Figure 5- 36 W irele ss A dva nc ed Transmit Power - Here you ca n specify t he trans mit power of r outer .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router messages for associate d clients, it sends the n ext DTIM with a DTIM Int erval value. Yo u c an specify the v alue between 1 - 25 5 Bea con Intervals. The default value is 1, which ind icates the DTIM Int erval is the same a s Beacon Inter val.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router No te: This page w ill be refreshe d automatically every 5 seconds. 5.6 Guest Ne twork Choose menu “ A dvanced → Guest Net work ”, y ou can configure t he Guest Network W ireless Setti ngs on the p age as shown in Figure 5- 38 .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Acc ess And Bandwi dt h Control Allow Gu est s to See Each Other - If t his checkbox is selected , anyone who c onnect s to the guest networ k can communi cate with each othe r .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.7 DHCP Figure 5- 39 The DHCP menu There are t hree submenu s under the DH CP menu , shown in Figure 5- 39 : DHCP Settings , DHCP Clien t s Lis t and A ddress Reservation . C lick any of the m, and you w ill be able to configure the correspond ing function s.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router the user will be a utomatic ally assigned a new dy namic IP addr ess. The range of the time is 1 ~ 2880 minutes . The default v alue is 120 minute s. Default Gateway - ( Optional.) I t is suggested to input the IP address of the Ethernet por t of the router .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router accesses the DHCP se r ver . Reserved IP addresses sho uld be assigne d to the server s that require per manent IP settings. Figure 5- 42 A ddress Rese rvation MAC A d dress - Th e MAC address o f the PC for which y ou want to reserv e an IP address.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.8 USB Sett ings Figure 5- 44 The USB Sett ings menu There are three submenus un der the U SB Settings menu (shown in Figure 5- 44 ): Device Settings , F ile Sha ring , and Print Server . Clic k any of them, and you will be able to configure the correspond ing function s.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 46 File Shar ing Shar ing A ccount Use Login A ccount - Select this rad io button, and t he sharing accoun t is the s ame wi th the login accou nt.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 2) FTP : This method is disa bled by default. If you select this chec k box and click the Sa ve butto n , the LAN users ca n access the USB drive t hrough FTP . T o ac cess the USB dr ive for exampl e from a Window s computer: i.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Allo w Guest Network A c cess - If this checkbox is selected, gue sts are all owed to access the shar ing file. E nable A uthenticati on - If this checkbox is selected, t hen the file sharing is need authent ication .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 49 NA T Boost 5.10 Forw arding Figure 5- 50 The Forwardi ng menu There are f our su bmenus under the Forw arding m enu: Virtual Servers , Port T riggering , DM Z and UPnP . Click any of th em, and you will be ab le to configure t he correspon ding function.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Servi ce Port - The numbers of External Serv ice Ports. Y ou can enter a service port or a range of serv ice ports ( the format is XXX – YYY ; XXX is the S tart port and YY Y is the En d port).
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Not e: It is possi ble that you hav e a computer or s erver that has more tha n one type of availab le service. If so, select another serv ice, and type t he same IP address for that comput er or serv er .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 3. Select the protocol used for T rigger Port from the T rigger Proto col drop - dow n list, either TCP , UDP , o r Al l . 4. Select the protocol used for I ncoming Port s from the Incomi ng Prot ocol drop - down list, either TCP or UDP , or All.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Clic k the Enable All button to make al l entries enabl ed. Clic k the Disable Al l button to ma ke all entries disa bled. Clic k the Delete A l l button to delete a ll entries Once the router is c onfigur ed, the o perati on is as fol lows: 1.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.10.4 UPnP Choose men u “ Advan ced → For warding → UPnP ”, and t hen you can v iew the infor mation about UPnP in the screen shown in Figure 5- 56 .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.11 Securit y Figure 5- 57 The Security m enu There are four su bmenus under the Security menu: Basic Securi ty , Advanced Sec urity , Local Manage ment and Rem ote Mana gement . Click any of t hem, and you will be able to con figure the correspond ing function s.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router VPN - VPN Passthro ugh must be enab led if you want to allow VPN t unnels using VPN protocols t o pass through t he router . PPTP Pa ssthrou gh - Point - to - Point Tunnel ing Protoco l (PPTP) allow s the Poi nt - to - Point Proto col (PPP) to be t unneled throu gh an IP networ k .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 59 A dvance d Security Packets Stati stics Interval (5~60) - The def ault v alue is 10. Select a value between 5 and 60 second s from the dro p - down list. The Packets S t atistics Interv al value indi cates the time section of the p ackets st atistics.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router En abl e TCP - SYN - FLOOD Attack Filte ring - Enable or Disable t he TCP - SYN - FL OOD Attack Filter ing. TCP - S YN - FLOO D Packets Thre shold (5~3600) - The d efault value is 50. Enter a v alue between 5 ~ 3600.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router use the password t o browse the built - i n web pages to perform Ad ministrator tasks while all the others will be b locked. After clic k the Ad d button, y our PC's MAC Addr ess will be place d in the list above.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.12 Pare nt al Contr ol Choose men u “ Ad vanced → Parent al Contr ol ”, and then you ca n configure th e parent al cont rol in the screen as sh own in Figure 5 - 62 .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 63 A dd or Modi fy Parenta l Control Entry 2. Enter t he MAC address of the PC (e.g. 00 - 11 - 22 - 33 - 44 - A A) you’d like to control in the M AC Addr e ss of Chi ld PC field, or you can choose the MAC address from the A ll Address in Current LAN drop - do wn list.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 1. Cl ick “ Parental Control ” menu on the left t o enter the Parental Contr ol Settings page. C heck Enable and e nter the MAC addr ess 00 - 11 - 22 - 33 - 44 - BB in the MAC Address of Parent al PC field.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.13.1 Rule Choose menu “ A dvanced → A ccess Control → Rule ”, and then y ou can view and set Acces s Control rul es in the screen as shown in Figure 5- 65 .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Mo ve - You can chang e the entry’s order as desired. Enter in the first box th e ID number of the entry you want to mo ve and in the se cond box anoth er ID number, a nd then cli ck the Mo ve button to chan ge the entries ’ order.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 67 Quic k Setup – Creat e an Access T arget Entry Target Descr iption - In this field, cr eate a descr iption for th e target. Not e that this descriptio n should be uniq ue (e.g.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 68 Quic k Setup – C reat e an Advanced Sch edule Entry Schedule D escription - In this field, creat e a descri ption for the sched ule. Note that this descriptio n should be uniq ue (e.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Target - In this filed, selec t a target from the dr op - down list f or the rule. Sched ule - In t his field, select a sc hedule from the drop - down list for the rule. Status - In this field, there are tw o options, Enable d o r Dis able d .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 4. Add a new target with the Target Descriptio n is Target_1 and Domain Name is www. google.com , and c lick Next . 5. Add a new schedule wit h the Schedule Des cription is Sche dule_1, Day is Sat and Sun, Start Time is 1800 an d Stop Time is 20 00, and click Next .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 72 A dd or Modi fy a Host Entry 2) If you select M AC Addres s, the screen is shown as Figure 5- 73 . In Host D escription field, cr eate a unique descr iption for the host , e.g. H ost_1 .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.13.3 Target Choose men u “ Advan ced → A ccess Control → T arget ”, and then y ou can vi ew and set a T arget list in th e screen as sh own in Fi gure 5- 74 . The t arget list is necessary for the Access Cont rol Rule.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 76 A dd or Modi fy an Access T arget Entr y 1) In Target De scription field, create a unique descr i ption for the t arget , e.g. Target_1. 2) In Domain Name field, e nter the do main name, eit her the full na me or the key words ( e.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 77 Schedu le Settings Schedule De scription - D isplay s the description of the schedule and thi s description is unique. D a y - D isplay s the day(s) in a week. Time - D isplays t he time period in a day .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router For example : If you desire to restrict t he internet activities o f host with MAC addres s 00 - 11 - 22 - 33 - 44 - AA to access ww w.google.c om only from 18: 00 to 20:00 on Sat urday and Sun day , you should first f ollow the setting s below: 1.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router T o add sta tic ro uting en tries: 1. Click A dd New… s hown in Figure 5- 80 , you w ill see t he following screen.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 82 Syst em Routing T able Desti nation Net work - The Destination N etwork is the address of the net work or host to whic h the stat ic route is assig ned.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 84 Bandw idth Co ntrol Settings En able Bandwi dth Contr ol - Se l ect thi s che ck box so that the B andwidth Contr ol setting s can take effe ct . Line Type - S elect the right type for you net work connecti on.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router T o add/mo dify a Ban dwid th Cont rol rule, follow the step s belo w. 1. Click A dd New… s hown in Figure 5- 85 , you w ill see a new screen shown in Fi gure 5- 86 . 2. Enter the informat ion like the screen s hown below .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 88 Bind ing Setting M AC Ad d r e s s - Th e MAC address o f the controlled computer in the L AN. IP A ddress - The assi gned IP address of the c ontrol led computer in the LA N.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 1. Click the Find b utton in Fi gure 5- 88 . 2. Enter the MAC Ad dress or IP Address . 3. Click the Find b utton in Figure 5- 90 . Figure 5- 90 Find I P & MAC B inding Entry Click the Enable All butt o n to make all entr ies enabl ed.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Not e: An item cou ld not be load ed to the IP & MA C Binding list i f the IP address o f the item ha s been loaded be fore. Error war ning will pro mpt as well. Li kewise, "Load All" only loa ds the items w ithout interferen ce to the IP & MAC Binding list.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Connecti on Status - The s tatus of the DDNS serv ice connect ion is displayed here. Clic k Logout to log out of t he DDNS service.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 94 No - ip .com DDNS Setti ngs To set up for D DNS, follow t hese ins tructions: 1. Enter the User Name for your DDNS account. 2. Enter the Passwo rd for your D DNS account. 3. Enter the Domain Na me you r eceived from dyna mic DNS service pr ovider .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.18.1 IPv6 Statu s Figure 5- 96 IPv 6 S tatus The IPv6 Stat us page displays the r outer 's current IPv6 st atus and configurati on.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.18.2 IPv6 Set up Figure 5- 97 Enabl e/Disable IPv6 Enable IPv 6 - T ick the chec kbox to enable the IPv 6 function. It ’s enabled by default. W AN Conne ction T ype - Choos e t he correct WA N connection t ype based on your ISP networ k topology .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 1) DHCPv6 Figure 5- 98 DHCPv6 - SLAA C Figure 5- 99 DHCPv6 – DHCPv6 Serv er Get non - t emporary IPv6 address - Get a non - te mporary IPv6 address from t he ISP.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Get IPv 6 prefix delegati on - Get a tem po rary I Pv6 address an d IPv6 prefi x from the IS P, the temporary IPv6 addre ss is set to the W AN p ort, an d the LAN port a dvertise I Pv6 address by RADVD or DHC Ps.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 2) St atic IPv6 Figure 5- 100 Sta t i c IP v6 - SLAAC Figure 5- 101 Sta t i c I Pv6 – DHCPv 6 Server IPv 6 Address - Enter the IPv6 addr ess in dotted - d ecimal notati on provided by y our ISP.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router MTU S ize - T he n orm al MTU (M axim um Tr ansmi ssi on U ni t) va lue for most Ethernet net works is 1500 By tes. For some ISPs, you may need to m odify the MTU. B ut this is r arely required, and should not be done unless y ou are sure it is neces sary for your I SP connection.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 103 PPPoE v6 – DHCPv 6 Server User Name/P assword - Enter the User Name and Pas sword provi ded by your IS P. T hese fields are cas e - sen si tive . Get IPv 6 A ddress Way • Ge t non - temporary IPv6 addr ess - Get a non - temporary IPv 6 address by DHCPv6 from th e ISP.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router DHCPv6 addr ess will be leased. The t ime range is 1~691200 sec onds. The default v alue is 86400 secon ds.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 105 Tu nnel 6to4 – DHCPv6 Serv er A ddress /Subnet Mask/ Default Gate way - the IPv4 address/ subnet mask/ default gat eway assigned , in dotted - deci mal notat ion. MTU Si ze - The normal MTU (M aximum Trans mission Unit) value for most Ethernet net works is 1 48 0 Bytes.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router • Release Time - the length of time a net work user will be allowed t o keep connecting t o the router with the current D HCPv6 Addres s. Enter the a mount of time (in sec onds) that t he DHCPv6 addr ess will be leased.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 107 T ime s et tings Time Zo ne - Select your l ocal time zone fro m this pull down l ist. Date - Enter y our local date in MM/ DD/YY into the right blan ks. Ti me - Enter your loca l time in HH/MM/ SS into the r ight blanks.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router T o set time automat ically : 1. Select your local ti me z one. 2. Enter the address or do main of the NTP Server I or NTP Server II . 3. C li ck the G et GM T butto n to get syst em time from Internet if you have c onnected to the Internet.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 109 Diagnost ic T ools Dia gnost ic T oo l - Check the radio b utton to select one diagnostic t oo. Ping - Thi s di agn os tic t ool t roubleshoot s connect ivity , reachabilit y , and na me resolution to a given host or gateway .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 11 0 Diagn ostic Result s Not e: 1. Only one user can use t he diagnostic t ools at one time. 2. "Ping Count", "Ping Packet Size" and "Pin g T imeout" are Ping Para meters, and " Tr aceroute Max TTL" is T raceroute Para meter .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Not e: 1) New fir mware versions ar e posted at www.tp - li nk .c om and can be down loaded for free. Th ere is no need to upgrade t he firm war e unless the new firmwar e has a new feature y ou want to use.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 11 3 Backup & Restore Con figuration Click the Backup button to sav e all configurati on settings as a bac kup file in your loc al computer . T o upgrade t he router 's co nfiguration, f ollow these inst ructions.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.19.7 Pass w ord Choose menu “ Advan ced → System T ools → Pa sswo rd ”, and then you can change the factory default user name and pa ssword of the router in the next scr een as shown in Figure 5- 11 5 .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 11 6 Syste m Log Auto Mail Feature - Indicat es whether auto ma il feature is enab led or not.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router N ote : Only when y ou select Aut henticat ion , do you hav e to enter the User N ame and Passwor d in the followin g fields. • User Name - Y our mail account name filled in the From fie ld.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 11 8 S tatisti cs Current Statistics Status - Enable or Disable. T he default value is disable d. To enable it, cl ick the Enabl e button. If it is disabled, the function of DoS pr otection in Sec urity set tings will be disabled.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Statistics Ta ble: I P /M AC Ad d r e s s The IP and MAC addr ess are dis played with relate d statistics. Total Packets The total number o f packets r eceived and t ransmitted by the router . B yte s The total nu mber of bytes receiv ed and transm itted by the rout er .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Appendix A: F AQ 1. How do I co nfigure t he router to access Inter net by A DSL users? 1) First, con figure the ADSL Modem configur ed in RFC1483 br idge mo del. 2) Connect t he Ethernet cab le from your ADSL Modem to the Int ernet port on the router .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 2. How do I co nfigure t he router to access Inter net by Ethernet users? 1) Login to t he router , click the “Networ k” menu on the left of your browser , and click "W AN" submenu.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure A - 5 Add or Modify a V irtual serv er Entry Not e: Your oppos ite side should call your WAN IP, whi ch is displayed o n the “Status” page.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure A - 7 Basic Secur ity 4. I want to bui ld a WEB Se rver on t he LAN, w hat s hould I do ? 1) Because t he WEB Serv er port 80 will inter fere with the W EB management por t 80 on the router , you must change t he WEB manage ment port numb er to avoid interfer ence.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 3) Log in to the rout er , cl ick the “ Forwar ding ” menu o n the left of your browser , and clic k the " V irtual S ervers " submenu.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Appendix B: Configuring the PC In this section, w e’ll introduce how to inst all and configur e the TCP/IP correctly in W indows XP . First make s ure your Ether net Adapter is working, refer to the adapter’s manu al if needed.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5) The following TCP/IP Properties window wi ll display and the IP Address tab is open on this window by default. 6) Sel ect Obtai n an IP ad dress automati cally and Obtai n DNS serv er automatically , as shown in the Fi gure below: Figure B -3 2.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router If the resu lt displayed i s similar to Figur e B -5 , it mean s t he connection bet ween your PC and the router fa iled. Figure B-5 Failure resu lt of Ping command Please ch eck the conne ction followin g these step s: 1.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Appendix C: S pecifications General S tandards IEEE 802. 1 1ac , I EEE 802 .1 1n , IEEE 802.1 1g , IEEE 802.1 1b , IEEE 802.1 1a , IEEE 802. 1 1e , IEEE 802 .1 1i , IEEE 80 2. 1X , IEEE 802.3X , IEEE 802.
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Appendix D: Glossary 802.11 ac - IEEE 802.11 ac is a wireless comput er networking stand ard of 802.11.This specificat ion will enable m ulti - station W LAN thr oughput of at lea st 1 gigabit per second .
Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router MTU ( Maxim um Transm ission Uni t ) - The size in by tes of the largest pack et that can be transmitt ed. N AT ( N etwork A ddress T ranslation) - NAT technol ogy tr anslates IP addresses of a lo cal area networ k to a different IP addr ess for the Internet .
Ein wichtiger Punkt beim Kauf des Geräts TP-Link Archer C9 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie TP-Link Archer C9 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für TP-Link Archer C9 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von TP-Link Archer C9 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über TP-Link Archer C9 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon TP-Link Archer C9 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von TP-Link Archer C9 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit TP-Link Archer C9. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei TP-Link Archer C9 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
