Benutzeranleitung / Produktwartung 86120-YZA59 des Produzenten Toyota
Zur Seite of 36
AM/FM RADIO WITH ELECTRONIC TUNER COMP ACT DISC PLA YER OWNER'S MANUAL 86120-YZA59 RECEIVER ASSY , RADIO Please read this manual before using the product. We suggest that you keep this manual in a safe place after reading for future reference. B64-3634-00_00_English.
2 | English Con tents Safety precautions 3 Notes 4 About CDs 5 About AA C, MP3 and WMA 6 General featur es 7 Pow er Selecting the Source Volume Attenuator System Q Audio Control Adjusting the detail o.
English | 3 Safety precautions About CD play ers/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenw ood dealer for connectable models of disc changers/ CD players.
4 | English Notes • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • If the unit fails to operate properly , press the Reset button.
English | 5 Handling CDs • Do not touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Do not stick tape etc. on the CD , or use a CD with tape stuck on it.
6 | English About AA C, MP3 and WMA The playable AAC/MP3/WMA file (her eaf ter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is not comforming to the specification, may not play normally , or the file and folder names may not display correctly .
English | 7 General fea tures Powe r T urning ON the Pow er Press the [SRC] button. T urning OFF the Pow er Press the [SRC] button for at least 1 sec ond.
8 | English General fea tures Sy stem Q Selecting the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [ Q] button. When you press the button once , the current sound setting is displayed.
English | 9 Bass level Adjustment Item Display Range Bass Cent er Fr equency "BAS F" 40/50/60/70/80/100/ 120/150 Hz Bass Q F actor "BAS Q" 1.00/1.25/1.50/2.00 Bass Extend "B EX" OFF/ON Middle level Adjustment Item Display Range Middle Cen ter Fr equenc y "MID F" 0.
10 | English General fea tures Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ST ANDBY" display. 2 Enter Speaker Setting mode Press the [VOL] knob.
English | 11 Subw oofer Output T urning the Subwoofer output ON or OFF . Push the Contr ol knob towards [AM] f or at least 2 seconds. Each time you push the knob, Subwoofer output switches ON and OFF .
12 | English T uner/T V contr ol features T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob towards [FM], it switches between the FM1, F M2, and FM3 bands.
English | 13 F unction of remote control Direct Acc ess T uning Entering the frequency and tuning. 1 Select the band Press the [F M] or [AM] button. 2 Enter Direct Ac cess Tuning mode Press the [DIRECT ] button on the remote control. "– – – –" is displayed.
14 | English T uner/T V contr ol features F unction of LX BUS T elevision TV T uning Selecting the TV channel of a connected LX BUS T elevision (optional accessory). The action depends on the setting of the connected LX BUS T elevision. Refer to the user instruction of the LX BUS T elevision for details.
English | 15 CD/Audio file/External disc contr ol features Playing CD & A udio file When a disc is inserted Press the [SRC] button. Select the "CD" display. • When a CD is inserted, the "IN" indicator is ON. Pause and play Press the C ontrol knob.
16 | English CD/Audio file/External disc contr ol features F ast Forwarding and Rev ersing F ast Forwarding Hold down towar ds [ ¢ ] with the Control knob. Release your finger to play the disc at that point. Reversing Hold down towar ds [ 4 ] with the Control knob.
English | 17 Scan Play Playing the first part of each song on the disc or Audio file folder y ou are listening to and searching for the song y ou want to hear . 1 Star t Scan Play Press the [SCAN] button. "TRAC SCN"/"FILE SCN"/"SCAN ON" is displayed.
18 | English CD/Audio file/External disc contr ol features T ext/T itle Scroll Scrolling the displayed CD text, Audio file t ext, or MD title. Push the Contr ol knob towards [FM] f or at least 2 seconds. • When the <Display Illumination Control> (page 21) is set to OFF , the display may black out while scrolling.
English | 19 Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The refer ence for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second.
20 | English Menu system In Standby mode Activating Security C ode Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is requir ed to turn on the audio unit when it is removed fr om the vehicle.
English | 21 In Standby mode T ouch Sensor T one Setting the operation check sound (beep sound) ON/OFF . Display Setting "BEEP ON" Beep is heard. "BEEP OFF" B eep canceled. In Standby mode Manual Clock Adjustment 1 S elect Clock Adjustment mode Push the Contr ol knob towards [FM] or [ AM].
22 | English Menu system In Standby mode Built-in Amp Setting Controlling the built-in amplifier . T urning OFF this control enhances the preout quality. Display Setting " AMP ON" The built-in amplifier activat es. " AMP OFF" The built-in amplifier deactivat es.
English | 23 In FM reception CRSC ( Clean Reception S ystem Circuit) T emporarily have rec eption alternate from stereo to mono to r educe multi-path noise when listening to the FM station. Display Setting "CRSC ON" The CRSC is ON. "CRSC OFF" The CRSC is OFF .
24 | English Basic Operations of r emote control Loading and Replacing the battery Use two " AA "/ "R6"-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case.
English | 25 Audio C ontrol [A UD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. • Refer to <Audio C ontrol> (page 8) for the operation method, such as the procedures f or Audio control and others operations.
26 | English Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........1 3 ..........6 4 ..........6 Installation Proc edure 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit.
English | 27 – + P.CONT MUTE ANT. CONT ILLUMI EXT.CONT. FRONT L FRONT R REAR L REAR R Connecting W ires to T erminals FM/AM antenna input Fr ont left output ( White) Fr ont right output (Red) F use .
28 | English Installation Accessory 3 (M5 × 6 mm) or Accessory 4 (M5 × 7 mm) Installation Install onto the car bracket using the supplied screws (M5 × 6 mm, M5 × 7 mm). The holes of the car bracket to use will differ depending on the car model. Accessory 2 (Only for NISSAN car) Car Bracket B64-3634-00_00_English.
English | 29 What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling service, first check the following table f or possible problems. General ? The pow er does not turn ON. ✔ The fuse has blo wn.
30 | English T roubleshooting Guide Disc source ? " AUX EXT" is displayed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the <About CD players/disc changers connected to this unit> (page 3) of the section on <Safety precautions>.
English | 31 The messages shown belo w display your systems condition. EJEC T: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ Load the disc magazine pr operly. No CD in the unit. ➪ Inser t the CD. NO DISC: No disc has been loaded in the disc magazine.
32 | English Audio section Maximum output power : 50 W x 4 F ull Bandwidth Power (at less than 1% THD) : 22 W x 4 Speaker impedance : 4 – 8 Ω T one action Bass : 100 Hz ± 8 dB Middle : 1 kH z ± 8.
B64-3634-00_00_English.indd 33 B64-3634-00_00_English.indd 33 06.10.10 8:27:41 PM 06.10.10 8:27:41 PM.
B64-3634-00_00_English.indd 34 B64-3634-00_00_English.indd 34 06.10.10 8:27:42 PM 06.10.10 8:27:42 PM.
B64-3634-00_00_English.indd 35 B64-3634-00_00_English.indd 35 06.10.10 8:27:42 PM 06.10.10 8:27:42 PM.
Owner's Manual Part Number: 01999-YZA48 Kenwood Part No. B64-3634-00 B64-3634-00_00_English.indd 36 B64-3634-00_00_English.indd 36 06.10.10 8:27:42 PM 06.
Ein wichtiger Punkt beim Kauf des Geräts Toyota 86120-YZA59 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toyota 86120-YZA59 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toyota 86120-YZA59 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toyota 86120-YZA59 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toyota 86120-YZA59 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toyota 86120-YZA59 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toyota 86120-YZA59 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toyota 86120-YZA59. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toyota 86120-YZA59 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.