Benutzeranleitung / Produktwartung P7215 des Produzenten Acer
Zur Seite of 59
Acer Projector P7213/F213/PF-X14/P7215/ F217/PF-X16 Series User's Guide.
Changes may be made peri odically to the infor mation in this publication without obligation to notify any person o f such revisions o r change s. Su ch chan ges will b e incorp orated in new editions of this manual or supplementary documents and publ ications.
iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instruct ions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning.
iv • To avoid damage of internal componen ts and to prevent battery leakage, do not place the product o n a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected sho rt current or damage rotor devices, lamp.
v Product servicing Do not attempt to service this product yourself, as opening o r removing covers may expose you to dangerous vo ltage points or other risks.
vi might cause fire or electric shock. • Do not use the produ ct if it has been dropped or th e case is broken. Return it to a dealer for inspection. • Do not face the projector lens to the sun. It can lead to fire . • Do not disconnect the power while the p rojector is operation.
vii Caution when listening to audio To protect your hearing, follow these instructions. • Increase the volume gradually until you can hear clearly and comfortably. • Do not increase the volume level af ter your ears have adjusted. • Do not listen to music at high volumes f or extended pe riods.
viii First things first Usage Notes Do : • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
Information for your safety and comfort iii First things first viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Cont.
Troubleshooting 28 LED & Alarm Definition Listing 32 Cleaning a nd replaci ng the d ust filters 33 Replacing th e Lamp 34 Ceiling Mount Install ation 36 Specification s 39 Compatibility modes 41 R.
1 English Introduction Product Features This product is a single-chip D LP ® projector. Outstanding features inclu de: • DLP ® technology • True 1024 x 768 XGA resolution 4:3 / 16:9 aspect ratio.
2 English Package Overview This projector comes wi th all the items shown below. Check to make sure your unit is complete. Contact your deale r immediately if any thin g is missing.
3 English Projector Overview Projector Outlook Front / upper side # Description # Description 1 Lens cap 6 Control panel 2 Remote control receivers 7 Power button 3 Zoom Lens 8 Screw cover 4 Focus rin.
4 English Rear side # Description # Description 1 Dust filter 11 Mini USB 2 LAN (RJ45 Port for 10/100M Ethernet) 12 Audio output connector 3 DVI input connector (for di gital signal with HDCP function.
5 English Control Panel # Function Description 1 LAMP Lamp Indicator LED 2K E Y S T O N E Adjusts the im age to compens ate for distor tion caused by tilting the p rojector. 3R E S Y N C Automati cally sync hronize s the projec tor to the input source.
6 English Remote Control Layout # Icon Function Description 1 Infrared transmi tter Sends signals to the pro jector. 2 (#) Laser pointer Aim the remot e at the viewi ng screen. 3 POWER Please see " Turning the Projector On/Off " section. 4 HIDE Temporarily turns off the vide o.
7 English Note: "#" Japan are a is not supported. 11 (#) Laser button Aim the remot e at the viewi ng screen, pr ess and hold t his button to activate the la ser pointer. This function is not s upported in Japanese market. 12 Enter No function.
8 English Getting Started Connecting the Projector Note: To ensure the projector works well with your computer, please make sure the timi ng of the display mode i s compatible with the projector.
9 English Turning the Projector On/Off Turning on the Projector 1 Remove the lens cap.(Illustration #1) 2 Ensure that the power cord and sign al cable are securely connected. The Power indicator LED will flash red. 3 Turn on the p rojector by pressing " Po wer " button on the control panel, and the Power indicator LED will turn blue.
10 English Turning the projector off 1 To turn the projector off, press the power button. This me ssage appears: "Please press the power button again to complete the shutdown process.
11 English Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with tilt adju sting wheels for adjusting the height of image. To raise/lower the image: 1 Use Tilt adjusting wheels to fine-tune the display angle.
12 English How to optimize image size and distance Consult the table below to find the optimal im age sizes achievable when the projector is positioned at a de sired di stance from the screen. Example: If the projector is 2.5 m from the screen, good im age quality is possible for image sizes between 51" and 62".
13 English Desired Distance (m) <A> Screen s ize Top Screen s ize Top (Min zoom) (Max zoom) Diagonal (inch) <B> W (cm) x H ( cm) From base to top of image (cm) <C> Diagonal (inch) <B> W (cm) x H (cm) From base to top of image (cm) <C> 1.
14 English How to get a preferred image size by adjusting distance and zoom The table below shows how to ach ieve a desired image size b y adjusting either the position or the zoom ring. For example: to obtain an image size of 60" set the projector at a distance 2.
15 English Screen size Distance (m) Top (cm) Diagonal (inch) <A> W (cm) x H (cm) Max zoom <B> Min zoom <C> From base to top of image <D> 30 61 X 46 1.22 1.46 55 40 81 X 61 1.63 1.95 73 50 102 X 76 2.03 2 .44 91 60 122 X 91 2.44 2.
16 English User Controls Installation menu The installation menu provides an on screen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen.
17 English Acer Empowering Technology Acer Empowering Key provide four Acer uniqu e functions, they are "Acer eView Management", "Acer eTimer Managem ent", "Acer ePower Management" and "Acer e3D Ma nagement respectively.
18 English Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the remote control or control panel.
19 English Color Display Mode There are many factory pr esets optimized for various types of images. • Bright: For brig htness optimizati on. • Presentation: For meeting presentation. • Standard: For common environment. • Video: For playing vi deo in a bright environm ent.
20 English Note: "Saturation" a nd "Tint" functions ar e not supported under compu ter or HDMI mode. Image Color Temperature Mode Use this function to choose CT 1 (6500K), CT2 (Native CT), CT3 (7500K), User mode. R Gain Adjusts the re d gain for color temper ature optim ization.
21 English Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under HDMI, DVI or Video mode. Note: "HDMI Color Range" and "HDMI Scan Info" functions are only supported under HDMI mode.
22 English Setting Startup Scree n Use this func tion to sel ect your desir ed startup screen. If you change the setting, the changes will take effect when you exit the OSD menu. • Acer: The default startu p screen of your Acer projector. • User: Use memorize picture from "Screen Capture" fun ction.
23 English Security Security This projector provides a useful se curity function for the administrator to manage usage o f the projector . Press to change the "Secur ity" setting. If the security function is enabled, yo ur must ente r the "Ad ministrator P assword" first before changin g the se curity settin gs.
24 English Administrator Password The "Administrator Password" can be used in both the "Enter Administrator Pas sword" and "Enter Pas sword" dialog boxes . • Press t o change the "Administrator Password". • The factory default of "Admini strator Password " is "1234".
25 English Management Audio ECO Mode Choose "On" to dim the pro jector lamp which will lower p ower consumption, extend the lam p life and reduce noise. Cho ose "Off" to return n ormal mode. High Altitude Choose "O n" to turn on High Altit ude mode.
26 English 3D Note : It needs correct se ttings on graphic card 3D appl ication pro gram for correct 3D display. Note: The SW players, such as Stereosc opic Player and DDD TriDef Media Player can support 3D format files. You can download these three players on web page below, - Stereoscopic Player (Trial): http ://www.
27 English Language Language Choose the multilingual OSD menu. Use the or key to select your preferred m enu language. • Press to confirm the selection.
28 English Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the follo wing troubleshooting guide. If the problem pe rsists, please contact your local reseller or service center.
29 English 3 Partial, scroll ing or incorrectly displayed image (for notebooks) • Press "RESYNC" on the remote control or control panel. • For an incorrectly displ ayed image: • Follow th e steps for item 2 (above) to ad just the resolution of y our computer.
30 English Problems with the Projector 9 Image is too small or too large • Adjust t he zoom ring on the to p of the projector. • Move the projector clos er to or furthe r from the screen. • Press "M ENU" on the remote control or on the control panel.
31 English OSD Messages # Condition Message Rem inder 1 Message Fan Fail - the system f an is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Please also check the dust filters if they are i nstalled.
32 English LED & Alarm Definition Listing LED Messages Message Lamp LED Temp LED Power LED Red Red Red Blu e Standby (power cord plugged in) -- -- V -- Power button ON -- -- -- V Lamp retry -- -- .
33 English Cleaning and replacing the dust filters Cleaning the dust filters Clean the dust filters after every 1000 hours of use. If they are note cleaned periodically, they can become clogged with dust, preventing proper ventilatio n. This can cause overheating and da mage the projector.
34 English Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message " Lamp is approach ing the end of its useful life in full po wer operation.
35 English To Change the Lamp 1 Turn off the projector by pressing the power button. 2 Allow the projector at least 30 mins to cool down. 3 Disconnect th e power cord. 4 Open the screw covers on both side s of the projector. (Illustration #1) 5 Remove the two screws on both sides of the projector at the same time.
36 English Ceiling Mount Installation If you wish to install the projector using a ce iling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included.
37 English 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Note: It is recommende d that you keep a reasonable space between the bracket and the projector to allow fo r proper heat distribution.
38 English 5 Adjust the angle and po sitioning as necessary. Note: The appropriate type of screw and washer for each model is listed in the table below.
39 English Specifications The specifications listed below are subjec t to change without notice. For final specs, please refer to Acer's published marketing specifications.
40 English * Design and specifications are subject to chan ge without notice. I/O connectors • Power socket x1 • VGA input x2 • Composite input x1 • S-Video x1 • VGA output x1 • HDMI x1 • DVI-D x1: with HDCP support • RS232 x1 • USB ×1 • 3.
41 English Compatibility modes A. VGA Analog 1 VGA Analog - PC Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] VGA 640x480 60 31.5 640x480 72 37.9 640x480 75 37.5 640x480 85 43.3 640x480 120 61.9 SVGA 800x600 56 35.1 800x600 60 37.9 800x600 72 48.
42 English 2 VGA Analog - Extend ed Wide timing 3 VGA Analog -Componen t Signal B. HDMI Digital 1 HDMI - PC Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] WXGA 1280x768 60 47.8 1280x768 75 60.3 1280x768 85 68.6 1280x720 60 44.8 1280x800 60 49.
43 English 2 HDMI - Extended W ide timing 800x600 72 48.1 800x600 75 46.9 800x600 85 53.7 800x600 120 77.4 XGA 102 4x768 60 48.4 1024x768 70 56.5 1024x768 75 60.0 1024x768 85 68.7 1024x768 120 99.0 SXGA 1152x864 70 63.8 1152x864 75 67.5 1152x864 85 77.
44 English 3 HDMI - Video Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] 480i 720x480 (1440x480) 59.94(29.97) 15.7 576i 720x576 (1440x576) 50(25) 15.6 480p 720x480 59.94 31.5 576p 720x576 50 31.3 720p 1280x720 60 45.0 720p 1280x720 50 37.5 1080i 1920x1080 60(30) 33.
45 English English Regulations and safety notices FCC notice This device has been tested and fo und to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
46 English Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Confor mity for EU countries Acer hereby declares that this projector series is in complianc e with the essential requirements and other relevant provisions of D irective 1999/5/EC.
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr.
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan The standards listed below are applied to the product if built with WLAN module or wireless keyboard and mouse.
Acer America Corporation 333 West San Carlos St., San Jose CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules.
Ein wichtiger Punkt beim Kauf des Geräts Acer P7215 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Acer P7215 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Acer P7215 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Acer P7215 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Acer P7215 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Acer P7215 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Acer P7215 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Acer P7215. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Acer P7215 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
