Benutzeranleitung / Produktwartung TECRA GMAD00134010 des Produzenten Toshiba
Zur Seite of 254
G M A D 00134010 06/07 If you need assistance: ❖ T oshiba’ s Support W eb site pcsupport.toshiba.co m ❖ T oshiba Global Suppo rt Centre Calling within the United St ates (800) 457-7777 Calling from outside the United St ates (949) 859-4273 Fo r more information, see “If Something Goes Wrong” on page 169 in this guide.
2 5.375 x 8.375 ver 2.3 Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
3 5.375 x 8.375 ver 2.3 Critical Applications The computer you hav e pu rchased is n ot designed for an y “critical applications. ” “Critical applications” means life s uppor t systems, medica.
4 5.375 x 8.375 ver 2.3 This device complies with P art 15 of the FCC Rules. Operation is subject to the follo wing two conditions: ❖ This device may not cause harmful interference. ❖ This device must accept an y interferen ce receiv ed, including interference that may cause undesired op eration.
5 5.375 x 8.375 ver 2.3 Connection to party line service is subject to state tarif fs. Contact the state public utility commission, public se rvice co mmission or corpor ation commission for information. T elephone Company Procedures The goal of the telephone company is to pro vide you with the best service it can.
6 5.375 x 8.375 ver 2.3 Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disab le your alarm equipment. If you ha ve questions abou t what will disable alarm equipment, consult your teleph one compan y or a qualified installer .
7 5.375 x 8.375 ver 2.3 Wireless Interoperability The TOSHIB A W ireless LAN Mini PCI Car d products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology , and is compl iant to: ❖ The IEEE 802.
8 5.375 x 8.375 ver 2.3 In some situations or en vironments, the use of W ireless LAN may be restricted by the proprietor of the b uilding or responsible representativ es of the organization.
9 5.375 x 8.375 ver 2.3 The term “IC” before the equipment certif ication num ber only signif ies that the Industry Canada tech nical specif ications were met. T o prev ent radio interference to the licensed service, thi s de vice i s intended to be operated indoors an d aw ay from windo ws to pr ovide maximum shielding.
10 5.375 x 8.375 ver 2.3 Modem W arning Notice Conformity Statement The equipment has been ap prov ed to [Com mission Decision “CTR21”] for pan- European single terminal connection to the Public Switched T elephone Network (PSTN).
11 5.375 x 8.375 ver 2.3 1. Sticker Please put the follo wing sticker on devices incorpora ting this product. 2. Indication The indication shown belo w appears on this equipment. 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 DS: This equipment uses DS-SS modulation.
12 5.375 x 8.375 ver 2.3 J AP AN APPR O V ALS INSTITU TE FOR TELECOMMUNICA TIONS EQUIPMENT Approv al Number: D01-1128J P TELECOM ENGINEERING CENTER Ap prov al Number: 03NY .A0018, 03GZD A001 7 The following restrictions apply: ❖ Do not disassemble or modify the device.
13 5.375 x 8.375 ver 2.3 Europe - Restrictions for us e of 2.4 GHz Frequencies in European Community Countries België/ Belgique: For pri v ate usage outside buildings acr oss public grounds over less than 300m no special re gistration with IB PT/BIPT is required.
14 5.375 x 8.375 ver 2.3 802.11a (5 GHz) Tu r b o M o d e ( 5 G H z ) Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries O: allo wed x: forbidden ❖ T o remain in conformance with Euro pean spectrum usage la ws for Wireless LAN operation, the abov e 2.
15 5.375 x 8.375 ver 2.3 ❖ This de vice must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community . Ad-hoc mode provides a direct communication between two client de vi ces without a W ireless LAN Access Point.
16 5.375 x 8.375 ver 2.3 802.11a (5 GHz) Tu r b o M o d e ( 5 G H z ) Approved Countries/Regions for use for the Intel ® PRO/ Wireless LAN 2100 3B Mini PCI Adapter This equipment is approv ed to the radio standard by the countries/regions in the follo wing table.
17 5.375 x 8.375 ver 2.3 Approved Countries/Regions for use for the T oshiba Mini PCI Wireless LAN Card This equipment is approv ed to the radio standard by the countries/regions in the follo wing table. Do not use this equipment except in the countries/regions in the following table.
18 5.375 x 8.375 ver 2.3 802.11a (5 GHz) Approved Countries/Regions for the Intel ® Wireless Wi-Fi ® Link 4965AGN This equipment is approv ed to the radio standard by the countries/regions in the follo wing table. Do not use this equipment except in th e countries/regions in the fol lowing table.
19 5.375 x 8.375 ver 2.3 Bluetooth ® Wireless T echnolo gy Interoperability Bluetooth ® Cards from TO SHIBA are designed to be interoperable with an y product with Bluetooth wireless technol ogy tha.
20 5.375 x 8.375 ver 2.3 Approved Countries/Regions for use ( Bluetooth ® wireless technology) Bluetooth ® Card from T oshiba equipment is ap proved to the radio standard b y the countries/regions in the follo wing table. Do not use this equipment except in th e countries/regions in the fol lowing table.
21 5.375 x 8.375 ver 2.3 In some situatio ns or en vironments, the use of Bluetooth wir eless technology may be restricted by the proprietor of th e b uilding or responsible representati ves of the organization.
22 5.375 x 8.375 ver 2.3 Ta i w a n The legal communications mentioned in the abov e item refer to radio communications operated in accordan ce with telecommunication laws and regulations.
23 5.375 x 8.375 ver 2.3 2. Indication The indication shown belo w appears on this equipment. 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 FH: This equipment uses FH-SS modulation. 3 The interference range of this equipment is less than 10m. 4 This equipment uses a frequenc y bandwidth from 2,400 MHz to 2,483.
24 5.375 x 8.375 ver 2.3 Optical Drive Safety Instructions This appliance contains a laser syst em and is classified as a CLASS 1 LASER PRODUCT . T o use this model pr operly , read th e user’ s guide carefully and keep it for your future reference.
25 5.375 x 8.375 ver 2.3 Export Administration Regulation This document contains technical data that may be controlled under the U.S. Export Administration Regulations, and ma y be subject to the approv al of the U.S. Department of Commerce prior to export.
26 5.375 x 8.375 ver 2.3 T rademarks T ecra is a registered trademark of T osh iba America Informa tion Systems, Inc. and/or T oshiba Corporation. Microsoft and W indo ws are registered t r ademarks of Microsoft Corporati on in the United States and/or other countries.
27 5.375 x 8.3 75 ver 2.3 Contents Introduction ................ ................................................................ 35 This guide ...............................................................36 Safety icons ............................
28 Contents 5.375 x 8.3 75 ver 2.3 Using the computer fo r the first time ......................47 Opening the display panel ................................. 47 Your computer’s features and specifications .... 48 Turning on the power ..............
29 Contents 5.375 x 8.3 75 ver 2.3 Caring for your computer ........................................79 Cleaning the computer ......................................79 Moving the computer ........................................ 79 Using a computer lock .
30 Contents 5.375 x 8.3 75 ver 2.3 Chapter 3: Mobile Comput ing................................................... 99 Toshiba’s energy-saver design................................99 Running the computer on battery power ..............100 Battery Notice .
31 Contents 5.375 x 8.3 75 ver 2.3 Surfing the Internet ......................................... 126 Internet features ..............................................126 Uploading to, and downloading files from, the Internet ..........................
32 Contents 5.375 x 8.3 75 ver 2.3 Preset Power Profiles .....................................150 Quickly creating a new power profile ..............150 Customizing a power profile ...........................150 Mouse Utility .........................
33 Contents 5.375 x 8.3 75 ver 2.3 Disk drive problems ........................................ 183 Optical drive problems ....................................185 Sound system problems ................................. 186 PC Card problems ...........
34 Contents 5.375 x 8.3 75 ver 2.3 Appendix B: Power Cord/Cable Connectors .......................... 213 Appendix C: Using ConfigFree™ with your T oshiba Computer ....... ....................................... 214 Getting Started .................
35 5.375 x 8.375 ver 2.3 I n t roduct ion W elcome to the world of powerful, portable, multimedi a computing. W ith your T o shiba notebook computer , your work and entertainment can accompan y you where ver you go.
36 Intro ductio n This guide 5.375 x 8.375 ver 2.3 The product specifications and confi guration information are designed for a product Series. Y our particular model may not have all the features and specifications listed or illustrated.
37 Introduction Safety icons 5.375 x 8.375 ver 2.3 Safety icons This manual contains safety in structions that must be observed to a void potential hazards that co uld result in personal injuries, damage to your equipm ent, or loss of data.
38 Intro ductio n Other documentation 5.375 x 8.375 ver 2.3 Other documentation Y our co mputer comes with the follo wing docu mentation: ❖ An electronic version of the user’ s guide (t his document) ❖ It may also contain guides for other programs that may come with your system.
39 Chapter 1 Getting Started This chapter provides tips for working comfortably , su mmarizes ho w to connect components, and e x plains what to do the f irst tim e you use your notebook com puter . Selecting a place to work Y our comp uter is portable and designed to be used in a v ariety of circumstances and locations.
40 Getting Started Selecting a place to work ❖ Extreme heat, cold, or humidity . ❖ Liquids and corrosi ve chemicals. Keeping yourself comfortable The T oshiba Instruction Manual for Safety and Com.
41 Getting Started Selecting a place to work ❖ Ne ver turn of f the computer if a dr i v e light indicates a driv e is activ e. T ur ning of f the computer while i t is reading from or writing to a disk/disc or flash media may damage the disk/ disc or flash media, the dri ve, or both.
42 Getting Started Setting up your co mputer Setting up your computer TECHNICAL NOTE: Y ou must complete all setup steps up to and including “Setting up your software” on page 42 be fore adding external or intern al components to your computer .
43 Getting Started Re gistering your computer with T oshiba If you are connecting your c omputer to a network, consult your system administrator before you choose your computer name and network settings. 6 Follo w the remaining screen prompts to complete the setup process.
44 Getting Started Connecting to a p ower sour ce ❖ Connect an optional ex ternal disk driv e (see “Connecting an optional external diskette dri ve” on page 71 ) ❖ Install PC Cards (see “Using PC Cards” on page 129 ) Connecting to a power source Y our comp uter requires po wer to operate.
45 Getting Started Connecting to a power sour ce T o connect A C power to the computer: 1 Connect the po wer cord/cable to the A C adaptor . (Sample Illustration) Connecting the power cor d/cable to t.
46 Getting Started Char ging the main battery The computer’ s m ain battery light giv es y ou an indication of the main battery’ s current charge: ❖ Glows amber while the mai n battery is being .
47 Getting Started Using the computer for the f irst time Battery life and charge time may var y depending on the applications, power management settings, and features used. Using the computer for the first time The computer is no w ready for you to turn it on and be gin using it.
48 Getting Started Using the computer for the fir st time Small bright do ts may appear on your screen displa y when you turn on your computer . Y our di splay contains an ex t remely lar ge number of thin-f ilm transistors (TFT) and is manufactured using high - precision technology .
49 Getting Started Adding memory (optional) 3 Press and hold the power b utton in until the on/of f ligh t on the system indicator panel glows b l ue — about one second. (Sample Illustration) T urning on the power The preinstalled operating syst em will load automatically .
50 Getting Started Adding memory (optional) Installing a memor y module M e mo r y m od ul e s can be inst alled in the memory module slots on the base of the computer . Y ou will need a small Phillips scre wdriv er for this procedure. If the computer has been running rec ently , the memory module may be hot.
51 Getting Started Adding memory (optional) 4 Remov e the main batt ery . For information on removing the main battery , see “Remo ving the battery from the computer” on page 110 . 5 Close the display pane l and turn the computer upside down to locate the memory module slot cover .
52 Getting Started Adding memory (optional) 7 Remov e the memor y module slot cov er . 8 Place the scre ws and the co ver in a safe plac e so that you can retrie ve them later . Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any s tatic electricity you may have built up.
53 Getting Started Adding memory (optional) aligning the connect or’ s notch wi th the matching key in the socket. (Sample Illustration) Aligning the memory module with the soc ket 12 Firmly press th e memory module into the memory slot’ s socket at approximately a 30-de gree angle (to the horizontal surf ace of the computer).
54 Getting Started Adding memory (optional) Do not force the memory mod ule into position. The memory module should be compl etely inserted into the socket and le vel when secured in place. (Sample Illustration) Inserti ng the memory m odule into the slot For this model, Slot A is the bottom slot.
55 Getting Started Adding memory (optional) Removing a memor y module If you need to remov e a memory m odule: 1 Complete steps 1 – 8 in “In stalling a memory module” on page 50 to shut do wn the comp uter and open the me mory module slot cov er .
56 Getting Started Adding memory (optional) 4 Replace the memory modu le slot co ver and secure it using the scre ws. 5 Re-insert the m ain battery . F or more information on i nserting the main battery , see “Inserting a charged battery” on page 111 .
57 Getting Started Har d Drive Reco very Utilities Hard Drive Recover y Utilities (A vailable on certain models) Y our computer has been configured with a hard disk partition to allow you to reco ver your hard di sk dri ve or reinstall selected applications and software features or utilities.
58 Getting Started Har d Driv e Reco very Utilities T o create recov ery CDs/D VDs: 1 Double-click th e Recov ery Disc Creator icon on the W indo w s ® desktop. Y ou can also launch the application b y clicking Start , All Programs , and then Recov ery Disc Creator .
59 Getting Started Har d Drive Reco very Utilities Hard Disk Drive Recover y using the recovery partition Y ou have the options of reco vering your system using the Hard Dri ve Recov ery partition to .
60 Getting Started Har d Driv e Reco very Utilities Recovering the original factor y image (recommended recover y method) Recovering a hard disk drive to its o ut of box state deletes all parti tions on the hard disk drive an d your information will be lost.
61 Getting Started Har d Drive Reco very Utilities Erasing the hard disk The Recov ery W izard allo ws you to delet e all data and partitions from the hard disk. T o delete the data and partitions from you r hard disk: 1 On the T oshiba Recovery W izard screen, select Erase the hard disk , and then click Next .
62 Getting Started Har d Driv e Reco very Utilities Recovering the C: partition of the HDD without changing the current partition size Recovering the C: drive to its factory default setting reformats your drive and your information on the recovered drive will be lost.
63 Getting Started Har d Drive Reco very Utilities The size of the C: drive will disp lay on the progress bar as you make your selections. 4 Click Next to begin the restoration. On ce complete, a message displays that the HDD has been reco vered. 5 Press any k ey on your keyboard to restart the computer .
64 Getting Started Har d Driv e Reco very Utilities Recovering the original factor y image (recommended recover y method) Recovering a hard disk drive to its factory default setting deletes all partitions on the hard disk drive and your information will be lost.
65 Getting Started Har d Drive Reco very Utilities Recovering the entire HDD without the HDD Recover y Area This option recov ers yo ur C: dri ve w ithout creating the HDD Recov ery Utilities partitio n.
66 Getting Started Using the T ouchP ad™ Installing drivers and applications The T OSHIB A Application Installer allo ws you to re install the dri vers and applications that were originally bundled with your computer . T o reinstall dri vers and applications: 1 Double-click the TOSHIB A Application Installer icon on t he W indo w s ® desktop.
67 Getting Started Using e xternal display devices Scrolling with the T ouchPad ™ There are two acti ve re gions on the T ouchPad ™ that allo w you to scroll as you would with any wheel de vice on a mouse or trackball. T o scroll vertically , run your finger up or do wn along the righ t edge of the T ouchPad.
68 Getting Started Using e xternal display devices 3 T urn on the external de vice. 4 Set the displ ay mode by pressing Fn + F5 , or by conf iguring the Display Properties settings.
69 Getting Started Using an external k e yboard Adjusting the quality of the external display T o obtain the best picture qual ity from your tele visi on (or other video display device), you may need to adjust the video settings. See the video device d ocumentation for additional configuration steps.
70 Getting Started Connecting a printer TECHNICAL NOTE: T o determine if your printer supports Plug and Play , check its documentation. If your printer does not su pport Plug and Play , yo u can set up the printer as described in “Setting up a printer” on page 70 .
71 Getting Started Connecting an optional external disk ette drive Connecting an optional external diskette drive Some operations, such as creati ng a password service disk ette, require a diskette dri ve designed for use with 3.
72 Getting Started T urning off the computer Options for turning off the computer Depending on the operatin g system installed, you hav e mo re than one option av ailable for turning off the computer: T urn Of f or Shut Do wn, Hibernate, and Standby .
73 Getting Started T urning off the computer ❖ Since information is being retrie ved from the hard disk rather than from mem ory , restarting f rom Hibernation takes a li ttle more time and consumes more main b a t tery po wer to start up than when restarting from Standb y .
74 Getting Started T urning off the computer Using the T urn Off Computer or Shut Down commands Depending on the operatin g system installed, use the following steps to turn of f your computer . Tu r n O f f Follo w these steps to turn of f the computer when you are not connected to a domain server: 1 Click Start , and then T urn off computer .
75 Getting Started T urning off the computer 3 Click on the Setup Action tab . (Sample Image) Setup action setting s scr een 4 Select the options you want from the drop-down lists. These options are set separately for how they operate while the computer is running on battery power or while connected to the AC power .
76 Getting Started T urning off the computer Using and configuring Hibernation mode T o turn off the computer usin g the Hibernation command, click Start , T urn off computer , and then select Hi bern a te .
77 Getting Started T urning off the computer 5 Click App l y . 6 Click OK . Once the computer is conf igured, you can place it into Hibernation mode by either pressing the po wer button or closing the display panel, depending on the Hibern ation options set.
78 Getting Started Customizin g your computer’ s settings 4 Select Standby for the options you want. These options are set separately for how they operate while the computer is running on battery power or while connected to the AC power .
79 Getting Started Caring for your co mputer Caring for your computer This section giv es tips on cleaning and moving your comput er . For information about taking care of your computer’ s battery , see “T aking care of your battery” on page 113 .
80 Getting Started Caring for your computer 1 Wrap the cable through or around some part of a heavy object. Make sure there is no way for a po tential thief to slip the cable of f the object.
81 Chapter 2 Learning t he Basics This chapter gi ves some computing tip s and pro vid es important information about basic features. Computing tips ❖ Sav e your work frequen tly . Y our work stays in the computer’ s temporary memory until you sav e it to the disk.
82 Learning the Basics Computing tips ❖ Back up your files to disks (or o ther remov able medi a) on a regular basis. Label the backup co pies clearly and store them in a safe place.
83 Learning the Basics Using the ke yboar d Using the keyboard Y our co mputer’ s k eyboard contai ns character keys, control k eys, function ke ys, and special W indo ws ® ke y s , pro viding all the functionality of a full-size k eyboard.
84 Learning the Basics Using the ke yboar d Ctrl, Fn, and Alt keys (Sample Illustration) Ctrl, Fn, and Alt keys The Ctrl , Fn , and Alt ke ys do different things depending on the program you are using. F or more info rmation, see your p rogram documentation.
85 Learning the Basics Using the ke yboar d Overlay keys The ke ys with gray numbers and symbols on th e front of them form the numeric and cursor o verlay . This ov erl ay lets you enter numeric data or control the cu rsor as you would using the 10-key k eypad on a desktop com puter’ s ke yboard.
86 Learning the Basics Starting a pr ogr am Starting a program The easiest way to start a program is to do uble-click the name of the f il e that contains the information you want to work on. T o f i nd the f ile , use My Computer or W indo ws ® Explorer .
87 Learning the Basics Starting a pr ogram Starting a program from Windows ® Explorer If a program is not listed in th e Al l Programs menu, you can start it from W indows ® Explorer . W indo ws ® Explorer gi ves you a vie w of your computer’ s contents as a hi erarchy or “tree.
88 Learning the Basics Saving your work Starting a program fro m the Run dialog box This ex ample uses the Run command to start W ordPad: 1 Click Start , and then Ru n . The Run dialog box appears. (Sample Image) Run dialog box 2 In the Run dialog box: ❖ If you know the program’ s locat ion, type the command line.
89 Learning the Basics Saving your work Many programs of fer a feature th at sa ves documents at re gular intervals. Check your program’ s do cumentation to see if it has an automatic sav e feature. Saving files 1 In your W indows ® -based application, c lick File , and then Sa ve .
90 Learning the Basics Printing your work File names The W indo ws ® operating syst em supports long fi l e names that can contain up to 255 characters and can include spaces. Some applications do not support long file names and require f ile names limited to no more th an eight characters.
91 Learning the Basics Backi ng up your work 2 In your W ind o ws ® application, click Fi le , and then Print . The program displ ays a Print dialog box. (Sample Image) Print dialog box 3 Specify the print parameters. F or example, the range of pages and number of copies to print.
92 Learning the Basics Using the optical drive Restoring your work T o restore information from you r backup media to your hard disk, use the Restore page in the back u p program. Look in the online Help or your operating sy stem documentation for informati on on restoring files.
93 Learning the Basics Using the optical drive Optical drive components The optical dri ve is located o n t h e si d e of the computer . Y our optical driv e may l ook like this: (Sample Illustration) Optical drive Driv e in-use indicator light —Indicates w hen the dri ve is in use.
94 Learning the Basics Using the optical drive 4 Grasp the tray and pull it fully open. (Sample Illustration) Drive tray fully extended 5 Hold the disc by its edges and check that it is free of dust. If the disc is dusty , clean it as described in “Caring for CD or D V D discs” on page 98 .
95 Learning the Basics Using the optical drive 8 Make sure the disc is completely on the spindle and is lying flat on the tray . If you insert the disc incorrectly , it may jam the drive. If this happens, contact T oshiba support for assistance. 9 Push the disc tray in b y pressing gentl y on the center of the tray until it clicks into place.
96 Learning the Basics Using the optical drive The W indo ws Media ® Player control panel works much lik e an ordinary compact disc player: ❖ T o play the CD or to pause, click the Play/Pause button. ❖ T o stop the CD, click the Stop button. Before putting on headphones to listen, turn the volume down.
97 Learning the Basics Using the optical drive Due to manufacturing and quality variations in third party optical media (e.g., CD or DVD) or optical media players/recorders, in certain cases, your T o.
98 Learning the Basics T oshiba’ s online r esour ces 2 Pull the tray out unti l it is fully open, remov e the disc, and place it in its protecti ve co ver . 3 Gently press the tray in to close it. Caring for CD or DVD discs ❖ Store your discs in their orig inal containers to protect them from scratches and k eep them clean.
99 Chapter 3 Mobile Computing This chapter co vers all aspects of using yo ur computer while tra veling. T oshiba’ s energy-saver design Y our co mputer enters a low-po wer suspension mode when it is not being used, thereby conserving ener gy and saving money in the process.
100 Mobile Computing Running the computer on battery power Y our computer contai ns T oshiba EasyGuard ® . The T oshiba EasyGuard * t echnology is made up of four fou ndational elements that incorpor.
101 Mobile Computing Running the computer on battery power T o ensure that the battery main tains its maximum cap acity , oper ate the computer on battery po wer at least once a month. The Lithium- Ion battery has no memory ef fect so it is not neces sary to let the battery fully discharge each time.
102 Mobile Computing Char ging batteries Using additional batteries In addition to the main bat tery , y ou may also have an optional secondary battery (not included w ith your computer).
103 Mobile Computing Char ging batteries The battery may no t start char ging imm ediately under the following conditions: ❖ The battery is extremely hot or cold. T o ensure that the battery char ges to its f ull capacity , wait until it reaches room temperature (50 to 80 degrees F ahrenheit, 10 to 26 degrees Celsius).
104 Mobile Computing Monitoring main battery power It is seldom necessary to charge the RTC battery because it charges while the computer is on. If the R TC batter y is low , the real-time clock and calendar may display the incorrect time a nd date or stop working.
105 Mobile Computing Monitoring main battery power HINT : Be careful not to confuse the battery light ( ) with the on/off light ( ). When the on/off light flashes amber , it indicates that the system is suspended (using the Windows ® operating system Standby command).
106 Mobile Computing Monitoring main battery power Determining remaining battery power Wait at le ast 16 seconds after turning on the computer before trying to monitor the remaining battery power . The computer needs this time to check the battery’ s remaining capacity and perform its calculations.
107 Mobile Computing Monitoring main battery power keeps track of where you were, so that when yo u turn on the po wer again, you can continue where you left of f. If you hav e Hibernation mode enabled (the def ault), the computer copies the d etails of your open pr ograms and files to the hard disk before shutting d o wn.
108 Mobile Computing Monitoring main battery power po wer savings and peak system performance. Y ou may also set indi vid ual po wer-sa ving options to suit your own needs. The follo win g sections describe ho w to choose a Po wer Profile and discuss each po wer-sa ving option.
109 Mobile Computing Changing the main battery Using a hot key to se t the Power Profile Y ou may use a hot key to set t he Po wer Profile. T o set the Power Prof ile: 1 Press Fn and F2 simultaneously to di splay the Po wer Profile pop-up w indo w .
110 Mobile Computing Changing the main battery TECHNICAL NOTE: T o avoid losing any data, save your f iles and then either completely shut down your computer or put it into Hibernation mode before changing the main battery . Removing the batter y from the computer T o remove the battery: 1 Sav e your work.
111 Mobile Computing Changing the main battery 6 Slide the battery release latch to release the battery . 7 Pull the discharged battery out of the computer . (Sample Illustration) Removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately .
112 Mobile Computing Changing the main battery If the battery does not slide into the slot easily , move the batter y release lock to the unlocked position and try again. Do not force the batter y into position. (Sample Illustration) Inserting the ba ttery 3 Slide the battery release lo ck to the locked position.
113 Mobile Computing T aking car e of your battery T aking care of your batter y The follo wing sect ions of fer tips on ho w to take care of your battery and prolong its life.
114 Mobile Computing T aking car e of your battery Maintaining your batter y Fully dischar ging your battery pack will allow better accurac y of the battery meter . T o fully discharge your battery pack: ❖ Periodically , disconnect the computer from a po wer source and operate it on battery power until the battery pack fully discharges.
115 Mobile Computing Disposing of used b atteries Disposing of used batteries The life of a battery pack depends on usage. When the battery pack needs replacing, the m ain battery light flashes amber shortly after you hav e ful ly rechar ged t he battery .
116 Mobile Computing T raveling ti ps T raveling tips The en vironmental precautions listed in “Selecting a place to work” on page 39 , also apply while trav eling. ❖ Ne ver leav e your computer on a sunny ledge or in a place where it could g et wet or cov ered in dust.
117 Chapter 4 Exploring Y our Computer’ s Features In this ch apter , you will explore so me of the special features of your notebook comp uter . Exploring the desktop The desktop is the launching pad for ev erythin g you can do in the W indo w s ® operating syst em.
118 Exploring Y our Computer’ s Features Explor ing the desktop Finding your way around the desktop Y our computer’ s desktop includes se veral standard features: icons, Start button, T askbar , System tray , and background pattern.
119 Exploring Y our Computer’ s Features Exploring the desktop If you place the cursor ov er an icon, a popup description of the file contents appears. Y our de sktop may contain other icons depending on yo ur conf i guration. See W in do ws ® online Help for more specif ic information on each icon and ho w to use it.
120 Exploring Y our Computer’ s Features Setting up for communications Setting up for communications T o connect to the Internet, or use an online service, you need: ❖ A browser or comm unications.
121 Exploring Y our Computer’ s Features Setting up for communications 8 Click OK to close the properties dialog box for that sp ecif ic modem. 9 Click OK to close the Modem Properties dialog box.
122 Exploring Y our Computer’ s Features Setting up for communications 2 Connect the other end to the RJ-11 wall jack. (Sample Illustration) Connecting to a wall jac k Connect the built-in modem only to ordinary analog phone lines. Never connect the built-in modem to a digital line (ISDN).
123 Exploring Y our Computer’ s Features Setting up for communications Setting up the connection T o set up an of fice connection, consult your network administrato r for network settings and ad dit ional considerations. T o set up a dial-up connection, use the Ne w Connection W izard: 1 Click Start , and then All Pr ograms .
124 Exploring Y our Computer’ s Features An overvie w of using the Internet Using Wireless LAN connectivity Wireless connectivity and some feature s may require you to purchase additional software, external hardware or services. A vailability of public wireless LAN access points may be limited.
125 Exploring Y our Computer’ s Features An overvie w of using the Internet The W orld Wide Web The W orld W ide W eb (or “W eb”) is a subset of the Internet—a collection of interl inked docum.
126 Exploring Y our Computer’ s Features An overvie w of using the Internet Surfing the Internet Once connected to the Internet, th e W eb browser displays a home page, for example, your ISP’ s home page on the Internet or your company’ s W eb si te home page.
127 Exploring Y our Computer’ s Features Explori ng audio feat ur es Uploading to, and downloading files from, the Internet T ransferring f iles from one co mputer to another is termed uploading (transferri ng data from your computer to a site on the W eb), or do wnlo ading (transferring data from a site on the W eb to your computer).
128 Exploring Y our Computer’ s Features Explor ing audio feat ur es 5 When you ha ve f inished recording, click the Stop button. The Sound Recorder window displays the ne w sound file as a wa veform . Y ou can only record 60 seconds at a time. 6 T o hear what you just recorded, click the Play button.
129 Exploring Y our Computer’ s Features We b C a m We b C a m Y our computer may come with a built-in web cam. W ith thi s web cam you can do the follo wing: ❖ T ake pictures and record videos wi.
130 Exploring Y our Computer’ s Features Using PC Car ds 2 Insert the PC Card. (Sample Illustration) Inserting a PC Car d 3 When the card is almost all the way in to the slot, push f irmly but gently to ensure a f irm c onnection with the computer .
131 Exploring Y our Computer’ s Features Using an Expr essCar d™ 4 Grasp the edges of the PC Card and slide it out of the slot. (Sample Illustration) Removing a PC Car d Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them.
132 Exploring Y our Computer’ s Features Using an Expr essCar d™ 2 Insert the ExpressCard. (Sample Illustration) Inserting an Expr essCar d 3 When the card is almost all the way in to the slot, push f irmly but gently to ensure a f irm c onnection with the computer .
133 Exploring Y our Computer’ s Features Using the Bridge Media Adapte r Slot Using the Bridge Media Adapter Slot The Bridge Media Adapter slot supp orts the use of Memory Stic k ™ , Memory Stick ™ PR O, Secure Digital ™ (SD ™ ), MMC ™ (MultiMediaCard ™ ), or xD-Picture Card ™ media.
134 Exploring Y our Computer’ s Features Using the i.LINK ® po rt Removing memor y media 1 Prepare the media for re mov al by clicking the Safely Remo ve Hardwar e icon in the System tray and then selecting the card or de vice you want to remove.
135 Chapter 5 Utilities Y our comp uter includes se veral utilities designed to help you to reconfigure your system to best meet your individual needs. T ogether , these allo w you to ascerta in certain system details, set additional option s, or change defa u lt options.
136 Utilities T OSHIBA Assist TOSHIBA Assist The T O SHIB A Assist provides qui ck access to computer functions and allo ws you to customize a range of computer settings. T o access TOSHIB A Assist, do one of the follo wing: ❖ Double-click th e TO SHIBA Assist shortcut icon on the desktop.
137 Utilities T OSHIBA Assist Connect The features av ailable in this cate gory are: ❖ Conf igFree™ Connectivity Doctor ❖ Conf igFree ❖ Bluetooth ® Setting s ❖ Bluetooth ® Local COM Settin.
138 Utilities T OSHIBA Assist Secure The features av ailable in this cate gory are: ❖ Supervisor p assword (Sample Image) TOSHIBA Assist window – Secure tab.
139 Utilities T OSHIBA Assist Protect & Fix The features av ailable in this cate gory are: ❖ TOSHIB A PC Diag nostic T ool Utility ❖ TOSHIB A HDD P rotection Utility (Sample Image) TOSHIBA Ass.
140 Utilities T OSHIBA Assist Optimize The features av ailable in this cate gory are: ❖ TOSHIB A SD™ Mem ory Card Format Util ity ❖ TOSHIB A Po wer Saver ❖ Mouse Utility ❖ T oshiba Hardw are.
141 Utilities T OSHIBA Appl ication Installer TOSHIBA Application Installer The T O SHIB A Ap plication Installer allows you to reinstall the dri vers and applications that were originally bundled with your computer . T o reinstall dri vers and applications: 1 Double-click the TOSHIB A Application Installer icon on t he W indo w s ® desktop.
142 Utilities Setting passwor ds Setting passwords Setting a password lets you walk away from your computer , providing additional protection for your files. When you set a password, you must enter the password before you can w ork on your computer again.
143 Utilities Setting passwor ds Setting a super visor password If you choose to set a s uper visor or user password, T oshiba strongly recommends that you save your password in a loca tion where you can later access it should you not remember it.
144 Utilities Setting passwor ds 4 Select Registered . A pop-up screen appears asking for a password. 5 Enter a password, then click OK . 6 Enter the password again, then click OK .
145 Utilities Setting passwor ds 2 On the left side, click the Optimize tab . 3 Click the Hardwar e Settings icon. 4 Click on the Password tab . (Sample Image) T oshiba P asswor d Utilit y window 5 Click on Register . 6 Enter your pas sword, and clic k OK .
146 Utilities T OSHIBA PC Dia gnostic T ool Utility TOSHIBA PC Diagnostic T ool Utility This utility can help diagnose pro blems with devices in your computer .
147 Utilities T OSHIBA HDD Pr otection Utility TOSHIBA HDD Protection Utility The T O SHIB A HD D Protection utility controls your computer’ s hard disk dri ve (HDD) protection feature, which parks the HDD whene ver motion is detected on the computer .
148 Utilities T OSHIBA SD™ Memory Car d F ormat Utility TOSHIBA SD ™ Memor y Card Format Utility This utility is used to format SD ™ cards used with the Bridge Media Adapter slot.
149 Utilities T OSHIB A P ower Saver TOSHIBA Power Saver The T OSHIB A Power Sav er is used for po wer management , enabling you to control your comput er’ s power usage, re gardless of the source, and use the man y pres et po wer profiles, or create one yourself.
150 Utilities T OSHIBA P ower Saver Preset Power Profiles The preset po wer profiles are: ❖ Full Power ❖ High Power ❖ Normal ❖ D V D Playback ❖ Presentation ❖ Long Life These prof iles cannot be deleted. It is not recommended to change the settings of these profiles.
151 Utilities Mouse Utility Mouse Utility The Mouse utility allows you to change your pointing device or mouse settings. T o access the Mouse utility: 1 Click Start , Contr ol Panel , and then Mouse , or click the Mouse icon in the Optimize tab of T O SHIB A Assist .
152 Utilities T o s h i b a H a rd w a re S e t u p T oshiba Hardware Setup T oshiba Hardware Setup is the T oshiba conf iguratio n management tool av ailable through t he W indows ® operating system.
153 Utilities TOSHIB A Zooming Utility ❖ Boot Priority —Allo ws you to change the sequence in which your computer searches the dr i ves for the operating system Y ou can also manual ly choose the Boot Priority by p ressing the po wer button to po w er on the computer , then quickly pressin g the F12 ke y .
154 Utilities T OSHIBA Zooming Utility T o access the TOSHIB A Zooming Utility: 1 Click Start , All Pr ograms , To s h i b a , Utilit ies , and then Zooming Utility , or click th e Zooming Uti lity icon in the Optimize tab of TOSHIB A Assist . The T O SHIB A Zoom ing Utility Properties screen appears.
155 Utilities T oshiba Button Contr ols T oshiba Button Controls The T oshiba Button Controls allow you to customize the T OSH IB A Assist button. The T OSHIB A Assi st button is located abov e the ke ybo ard. T o access T oshiba Button Controls: 1 Click the T oshiba Button Control icon in the Optimize tab of TOSHIB A As sist .
156 Utilities CD/D VD Drive Acoustic Silencer CD/DVD Drive Acoustic Silencer This utility can slow t he speed of your optical driv e to make it run more quietly .
157 Utilities T OSHIB A Accessibility TOSHIBA Accessibility The T O SHIB A Accessibi lity utility allo ws you to use the Fn key to create a hot ke y combi nation with one of the function ke ys without pressing the two ke ys simu ltaneously as is usually required.
158 Utilities F ingerprint A uthentication Utility Fingerprint Authentication Utility (A vailable on certain models) The f ing erprint authentication utility (av ailable on certain mo dels) can be used to replace the k eyboard-based user/BIOS password authentication system when booting up.
159 Utilities F ingerprint A uthentication Utility 6 Swipe your finger on the reader . A sample will be created and in dicated b y a Fingerprint icon. 7 Repeat the previous step. Swip e the same finger on the reader two more times to create two mo re samples.
160 Utilities F ingerprint A uthentication Utility Fingerprint Logon The fingerprint utility enables l ogon to your comp uter using f ingerprint s. During us er enrollment, fingerpr int samples are sa ved and associated with the user’ s W indows ® user account.
161 Utilities F ingerprint A uthentication Utility Y our hardware must support Power -on security to use the single logon feature. Y ou must have administrative privileges to change settings. T o enable po wer-on security single logon: 1 Open the Contr ol Center an d go to Settings - System Settings .
162 Utilities F ingerprint A uthentication Utility Fingerprints ❖ Enroll or edit current user’ s f ingerprint templ ates—Runs the f in gerprint enrollment wizard.
163 Utilities F ingerprint A uthentication Utility Elevate Administrative Privileges for User ❖ Ele vate administrati ve pri vileg es for user .—By def ault, the operating system assumes you are a user and not an administrator , and ren ders most of the system settings in the Control Center gray and una vai lable.
164 Utilities F ingerprint A uthentication Utility Registering a new W eb page or dialog Y ou are lo gged on to the computer and want to register a ne w W eb page. T o create a new re gistration: 1 Display a W eb page you want to register . 2 Fill in the data you want to re play the next time you acces s this W eb page.
165 Utilities F ingerprint A uthentication Utility Replaying registrations with multiple forms Passw ord Bank registers forms, not pages. If a page contains se veral forms, each form requires a separate registration.
166 Utilities F ingerprint A uthentication Utility that may be incompatibl e or not work properly with automatic submittal. Deleting a registration Y ou are lo gged on to the computer and want to delete an existing registration. T o delete an existing re gistration : 1 Click the Settings topic in the Contr ol Center .
167 Utilities F ingerprint A uthentication Utility Care and maintenance of your fingerprint reader Failure to follo w these g uidelines and/or procedures might result in damage to the reader or cause r eader f ailure, finger re cognition problems, or lo wer finge r recognition success rate.
168 Utilities F ingerprint A uthentication Utility swollen f ingers, m ay lo wer the recognition success rat e. Also if the f in gerprint is worn do wn or the finger becomes thinner or fatter , the recognition success rate may be lo wered. ❖ The f ingerprint for each f inger is different and unique .
169 Chapter 6 If Somet hing G oes W r o ng Some problems you may encoun ter when using your computer are relativ ely easy to identify and solve. Others may require hel p from your network administrator or the manufacturer of the software program. This chapter aims to help you solve man y prob lems b y yourself.
170 If Something Goes Wrong Pr oblems that ar e easy to fix 3 Select the program you want to close, then click End T ask . Closing the failed p rogram should allow you to continue working. If it does not, continue with the next step. 4 Close the remaining programs one by one by selecting the program name, then End T ask .
171 If Something Goes Wrong Pr oblems when you turn on th e computer Problems when you turn on the computer These problems may occur wh en you turn on the power . The computer will not start. Make sure you attached the A C adaptor and po wer cord/cable properly or installed a charged battery .
172 If Something Goes Wrong Pr oblems when you turn on the computer lost. Y our computer can be configur ed to warn you wh en the battery is running low see “What to do when the main battery runs lo w” on page 106 .
173 If Something Goes Wrong The W in dows® oper ating system is not working 4 Connect the A C ada ptor to a dif f erent power outlet, prefera b ly in a dif ferent room. If the comp uter starts normally , there may be a problem with the A C outlet itself, or the v oltage lev el a vailable from it.
174 If Something Goes Wrong The W indows® operating system is not working 2 Press F8 when your computer st arts and before W indows ® starts loading.
175 If Something Goes Wrong Resolving a har d war e conflict My br owser cannot f ind a site I bookmark ed. The W orld Wi d e W eb is constantly changing. A site yo u bookmarked yesterday may not be av ailable today or it s serv er may be do wn for temporary repair .
176 If Something Goes Wrong Resolving a hardwar e conflict The recommended procedure for getting multiple devices to w ork together is to add and set up one device at a time. After you add each de vice, test it to make sure it and all pre viously connected de vices work.
177 If Something Goes Wrong Resolving a har d war e conflict Resolving conflicts There are se veral things you can do to resolve hardw are conflicts: ❖ Get the most recent dri vers from the manufacturer . ❖ Disable the device. Fo r an older de vice, remo ve it from the computer .
178 If Something Goes Wrong Resolving a hardwar e conflict Checking device properties De vice Manage r pro vides a way to vi e w the properties of a de vice. Properties include the name of the manufacturer , the type of device, the dri vers installed, and the sy stem resources assigned to the de vice.
179 If Something Goes Wrong Resolving a har d war e conflict Memor y problems Incorrectly connected or faulty memory modules may cause erro rs that seem to be device-related. It is worthwhile checking for these fir s t: 1 Click Start , T urn off computer .
180 If Something Goes Wrong Resolving a hardwar e conflict Here are some typical problems and ho w to solve them: The A C power light does not come on when you plug in the A C adaptor and power cord/ca ble. Make sure the A C adaptor and power cord/cable are f irmly plugged into both the wall outlet and the computer .
181 If Something Goes Wrong Resolving a har d war e conflict information that shipped with your computer , or visit the T oshiba W eb site at accessories.toshiba.com. Refer to this site often to stay current on the most recent software and hardware op tions for your computer , and for other pro duct information.
182 If Something Goes Wrong Resolving a hardwar e conflict If you are usin g the b uilt- in screen, make sure the display priority is not set for an external monitor .
183 If Something Goes Wrong Resolving a har d war e conflict T o change the display properties: 1 Right-click in a blank area of the W indows ® desktop. The Displa y Properti es windo w appears. 2 Click Properties , then cl ick the Settings tab . 3 Adjust the screen resolution and/or color quality .
184 If Something Goes Wrong Resolving a hardwar e conflict T o run Error-checking: 1 Click Start , then click My Computer . 2 Right-click the driv e you want to check. 3 On the pop-up menu, click Properties . The dri ve’ s Properties box appears. This feature is not available for optical drives.
185 If Something Goes Wrong Resolving a har d war e conflict The metal cover or a loose label may be obstructing the path into the dri ve. Carefully inspect the disk ette. If the metal cover is loose, replace the diskette. If the label is loose, replace the label and try inserting the diskette again.
186 If Something Goes Wrong Resolving a hardwar e conflict Never use a pencil to press the manual eject button. Pencil lea d can break off inside the computer and damage it. Some discs run corr ectly but others do not. Check the type of disc you are usin g.
187 If Something Goes Wrong Resolving a har d war e conflict Card Information Structure When you insert a PC Card into a slot, the computer attempts to determine the type of card and the resources it requi res b y reading its Card Informati on Structure (C IS).
188 If Something Goes Wrong Resolving a hardwar e conflict 6 Double-click the appropriate PC Card. The operating system displays your PC Card’ s Properties dialog box, which cont ains information about your PC Card conf i guration and status. The computer stops working (hangs) when y o u insert a PC Card .
189 If Something Goes Wrong Resolving a har d war e conflict Refer to the card’ s documentation, whi ch should contain a troubleshooting section. ExpressCard™ problems ExpressCards™ include many types of devices, s u ch as a remov able hard disk, additional memory , or a pager .
190 If Something Goes Wrong Resolving a hardwar e conflict Resolving ExpressCard problems Here are some common problems and their solu tions: The slot appears to be dead. ExpressCards™ that used to w ork no longer work. Check the ExpressCard™ status: 1 Click Start .
191 If Something Goes Wrong Resolving a har d war e conflict Never swap modules when the computer is in Hibernation or Standby mode. This is known as “warm swapping” and is not supported with this computer . For more information on Hibernation and Standby modes see “Hibernation mode” on page 72 and “Standby mode” on page 73 .
192 If Something Goes Wrong Resolving a hardwar e conflict T ry printing anoth er f ile. For exam ple, you could create and attempt to print a short test f ile using Note pad. If a Not epad f ile prints correctly , the pro blem may be in your original f ile.
193 If Something Goes Wrong Resolving a har d war e conflict Wireless networking problems This section provides general troubleshooting tips for networking problems, specifically wireless (Wi-Fi ® ) networking. The terms and concepts used as sume a basic understanding of networks, and may be for more advanced users.
194 If Something Goes Wrong Resolving a hardwar e conflict 4 Select Internet Prot ocol (TCP/IP ) , then click Pr operties . 5 Select Obtain an IP address automatically . 6 Click OK , then click Close . ❖ Use IPCONFIG to verify that the computer has a useful IP address—one other than the pri vate address of 169.
195 If Something Goes Wrong D VD operating pr oblems not be secure. Y ou can still, ho wev e r , use the access point. T o use an access point without WEP encr yption, follo w these steps: 1 Right-click the Wir eless Network icon in the System T ray (far -right po rtion of the W indows ® T askbar).
196 If Something Goes Wrong D VD o per ating pr oblems A blank scr een appears while watching a D VD-R OM movie or title. Disable the Shut off Monitor feature in the Display Properties using the following steps: 1 Right-click in a blank area of the W indows ® desktop.
197 If Something Goes Wrong Develop good computing habits 2 Click Appearance and Themes , and double-click the Display icon. The Display Properties dialog box appears. 3 Click the Scr een Saver tab . In the Screen Sav er list, the curr ent screen sav er is highlighted.
198 If Something Goes Wrong Develop good computing habits Read the user’ s guides. It is very dif ficult to prov id e a f ail-safe set of steps you can fo llo w e very time you experience a p roblem with the computer . Y our ability to solve problems will improve as you learn about ho w the computer and its software work together .
199 If Something Goes Wrong Develop good computing habits as “Before installing Brand X Accounting app. ” Then click Create . 5 The W indo ws ® operating system creates the Restore Point and automatically stamps it with the cur rent date and time.
200 If Something Goes Wrong Develop good computing habits Follo w these steps to back up files in the My Documents folder to one or more CDs: Y ou can not back up the computer while running on battery power . Connect the AC adaptor before continuing. 1 Put a blank CD-R (CD-recordable ) disc into th e com puter’ s optical dri ve.
201 If Something Goes Wrong Develop good computing habits 8 A CD Writing W izard will appear , prompting for a name for the CD. Y ou may accept the default name, or enter a new (more descripti ve) name. Click Next to continue. 9 The CD Writing W izard will no w wr ite the selected f iles to the CD.
202 If Something Goes Wrong If you need further assistance This will make it much easier to determ ine the origin of any ne w problems. For best results, fo llo w this sequence: 1 Back up critical data. 2 Create a Restore Point. 3 Install on e item of hardware or software.
203 If Something Goes Wrong Other T oshiba Internet W eb sites Contacting T oshiba If you still need h elp and suspect that the probl em is hardware- related, T oshiba of fers a va riety of resources to help you.
204 If Something Goes Wrong T oshiba’ s worldwide off ices T oshiba’ s worldwide offices A ustralia T oshiba (Austral ia) Pty . Limited 84-92 T ala vera Road North Ryde N SW 2113 Sydney Australia Canada T oshiba Canada Ltd. 191 McNabb Street Markham, Ontari o L3R - 8H2 Canada France T oshiba Systèmes (France) S.
205 If Something Goes Wrong T oshiba’ s worldwide off ices For more information on addi tional T osh iba w o rldwide locations, please visit: www .toshi ba.co.jp/ index. htm . United Stat es T oshiba America Information Systems, Inc. 9740 Irvine Boulev ard Irvine, California 92618 United States The Rest of Europe T oshiba Euro pe (I.
206 5.375 x 8.375 ver 2.3 Appendix A Hot Keys Hot ke ys are keys that, when pr essed i n combination with th e Fn ke y , turn system fu nctions on and of f.
207 Hot Keys P asswor d security 5.375 x 8.375 ver 2.3 With a password The Fn + F1 ke y combination turns of f the display and acti vates instant securi ty . If you set a blank screen sa ver , pressing the Fn + F1 key combination to acti v ate instant secu rity will cause the screen to go blank.
208 Hot Keys P ower pr ofile 5.375 x 8.375 ver 2.3 T o ensure the password protec tion is acti v ated after pressing Fn + F1 (to acti vate instant security), wait ten seconds be fore walking a way from the computer . Power profile Standby mode Fn + This hot ke y displays the po wer profile pop-up wind o w and cycles through the power prof iles.
209 Hot Keys Hibernation mode 5.375 x 8.375 ver 2.3 Hibernation mode Fn + This hot ke y places the comp uter into Hibernation mode. If Hibernation mode is enabled (the default) a message box displays by def au lt to conf irm the comput er is entering Hibernation mode.
210 Hot Keys Display modes 5.375 x 8.375 ver 2.3 Display modes Display brightness Fn + This hot key c ycles through the power -on display op tions. Some modes are only available with the appropriate device attached and turned on.
211 Hot Keys Disabling or en abling wir eless de vices 5.375 x 8.375 ver 2.3 Disabling or enabling wireless devices Disabling or enabling the T o uchPad Zooming applications in/out Fn + This hot key enables/disables the opt ional wireless devices installed in y our computer .
212 Hot Keys K e yboar d hot ke ys 5.375 x 8.375 ver 2.3 Keyboard hot keys Fn + This hot key turns the curs or control o verlay on and o f f. Fn + This hot key turns the numeric ov erlay on and of f. Fn + This hot key turns the scroll lock feature on and off.
213 5.375 x 8.375 ver 2.3 Appendix B P o wer Cord/Cable C o nnector s Y our n otebook computer features a univ ersal power supply you can use worldwide. This appendix sho w s the shapes of the typical A C po wer cord/cable connectors fo r v arious parts of the world.
214 5.375 x 8.375 ver 2.3 Appendix C Using ConfigFree ™ with your T oshiba Computer All references to Bluetooth ® in this appendix are applicable only if Bluetooth ® is available on your system. ConfigFree ™ is a set of utilities that makes it easy to control communication de vices and networ k connections.
215 Using ConfigFree™ with your T oshiba Computer Getting Started 5.375 x 8.375 ver 2.3 ❖ Profile Settings—The Profiles utility lets you switch bet ween network conf iguratio ns.
216 Using ConfigFree™ with you r T oshiba Computer Getting Started 5.375 x 8.375 ver 2.3 appropriate icon on the Launcher to start the desired ConfigFree utilities. (Sample Imag e) C onf igF r ee Launcher ConfigFree Launcher can be set to hide from view when it is not in use.
217 Using ConfigFree™ with your T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 (Sample Image) Conf ig F r ee Lau n c her com ing bac k into view ConfigFree Utilities Connectivity Doctor The Connecti vit y Doctor lets you analyze your network connections and fix network connection p roblems.
218 Using ConfigFree™ with you r T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 ❖ Status of wireless communication swit ch (on or of f) (Sample Image) Connect ivity Doctor scr een.
219 Using ConfigFree™ with your T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 triangles display , you can toggle between each of their cause and solution info rmation screens by clicking its exclamation point.
220 Using ConfigFree™ with you r T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 Search for Wireless Devices can also be started from the ConfigFree Launcher . For W i -F i ® networks, the intensity of a signal is displayed in fi ve le vels or “bands.
221 Using ConfigFree™ with your T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 T o add a ne w wireless conn ection to an Access Point: 1 Open the Search for W ireless De vi ces option from ConfigFree Launcher . 2 Drag and drop the device you w ant to connect to the computer icon at the center of the map.
222 Using ConfigFree™ with you r T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 Creating a detected device wireless connection The follo wing screen sho ws an example of Bluetooth ® devices that are detected using the Sear ch for W ireless De vices option.
223 Using ConfigFree™ with your T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 ❖ Drag and drop the f ile dire ctly onto the icon f or that Bluetooth ® de vi ce.
224 Using ConfigFree™ with you r T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 3 Click Send . During a file transfer , connecting and disconnecting to the selected device will occur automatically .
225 Using ConfigFree™ with your T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 T o create a profile: 1 Click the Conf ig Fr ee icon on the System T ray . 2 Mov e the pointer to Prof ile . 3 Click Add . The Add Prof ile screen appears.
226 Using ConfigFree™ with you r T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 (Sample Image) Expanded Add Pr o f ile scr een The online Help provides real-world examples of setting up profiles for different networking environments.
227 Using ConfigFree™ with your T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 ❖ Bluetooth ® P AN/LAP ❖ Cross cable (Ethernet or Gbit Ether net) T o host a ConfigFree SUMMIT , click th e SUMMIT icon on the ConfigFree Launcher , select the users that you w ant to attend the SUMMIT meeting, and send them an invitation.
228 Using ConfigFree™ with you r T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 Only the SUMMIT Host (the initiator) can share files with multiple users by this method.
229 Using ConfigFree™ with your T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 Participating users must be connected by LAN, wireless LAN, or Bluetooth ® (P AN).
230 Using ConfigFree™ with you r T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 Quick Connect The Quick Connect feature includes two options: ❖ T oshiba Wi reless Pr ojector . Switches the W ireless LA N connection to connect to a T oshiba W ireless Projector ❖ Direct L ink T o shiba De vice .
231 Using ConfigFree™ with your T oshiba Computer Conf igF r ee Utilities 5.375 x 8.375 ver 2.3 Because the wireless LAN’ s default connection setting is for Ad Hoc mode, the T oshiba Wireless Projector will not connect if the projector is set to Infrastructure mode.
232 Using ConfigFree™ with you r T oshiba Computer Using the A utomatic Switch 5.375 x 8.375 ver 2.3 T o use this feature: 1 Display the Conf igFree menu.
233 Using ConfigFree™ with your T oshiba Computer Semi-A utomati c Switc h F eatur e 5.375 x 8.375 ver 2.3 If your computer is connected to multiple wireless LAN devices, the Auto Switch (SSID) feature is disabled. T o enable this feature, only one wireless LAN device can be used.
234 Glossar y TECHNICAL NOTE: Some features defined in this glossa r y may not be available on your computer . Acronyms The follo wing acronyms may app ear in this user’ s guid e.
Glossary 235 DOS disk operating system DPI dots per inch DSTN dual supertwist nematic DV D digital versatile (or video) di sc DV D - R O M digital versatile (or video) disc read -only memory ECP enhan.
236 Glossar y SDRAM synchronous dynamic ran dom access memory SRAM static random access memory SV GA super video graphics adapter TFT thin film transistor USB uni versal serial bus URL uniform resource locator WA N wide area netw ork www W orld W ide W eb Te r m s The follo wing ter ms may appear in this user’ s guid e.
Glossary 237 baud rate — The speed at which a comm unication de vice, such as a printer or modem, transmits in formation. Baud r ate is the number of signal changes per second (not necessarily the same as bits per second). See also bits per second .
238 Glossar y central processing unit (CPU) — The chip that functions as the “brain” of the computer . It takes informa tion from outside sources, such as memory or ke y board input, processes the information, and sends the results to another device that uses the information.
Glossary 239 device — A component attached to the computer . Devices may be external (outside the computer’ s case) or internal (inside the computer’ s case). Printers, disk dr iv es, and modems are examples of de vices. device dri ver — A program (called a “dri ve r”) that permits a computer to communicate with a de vice.
240 Glossar y double-density diskette — A 3.5-inch diskette that can hold up to 720 KB of information (half the capac ity of a high-densi ty diskette). See also diskette, high-density di sk ette. download — (1) In communications, to recei ve a f ile from another computer through a modem or network.
Glossary 241 f ile extensio n — The three characters foll o wing the perio d (pronounced “dot”) at the end of a f ile name. The extension indicates the type of f ile. Examples are .ex e for program files and .hlp for help f iles. See also file name .
242 Glossar y hot key — (1) A feature in wh ich certain ke ys in combin ation with the Fn ke y can set system options or control system parameters, such as the batt ery sav e mode. ( 2) A ke y or combi nation of k eys t hat acti vates a memory resident program.
Glossary 243 local area network — See LAN. logical drive — A sectio n of a disk th at is recognized by the operating system as a separate disk dri ve. A system’ s logical dri ves may dif fer from its physical driv es. For example, a single hard disk driv e m ay be partitioned into two or more logical d ri ves.
244 Glossar y non-system disk — A disk for storing programs and data that cannot be used to start the computer . Compare system disk . O online — A v ailable throug h t he computer .
Glossary 245 port — A socket on the computer where you plug in a cable for connectio n to a network or a peripheral de vice. proces sor — See central pr ocessin g unit (CPU) . program — A set of instructions that can be e xecut ed by a com puter .
246 Glossar y S select — T o highlight or otherwise specify text, data, or graphics with the intent to perform some operatio n on it. serial — Processes that occur one at a time. In communicati ons, it means the transmission of one bit at a time sequentia lly o ver a single channel.
Glossary 247 W We b — See W orld W ide W eb . Wi -F i ® — A re gistered trademark term of the W i-Fi Alliance that stands for W ireless Fidelit y , and is anot her term for the communication protocol to permit an Ethernet connection using wireless communication components.
248 Index A A C adaptor 44 AC p o w e r connecting adaptor 45 accessories memory 49 adding memo ry 49 adjusting recordin g quality 128 Alt ke ys 84 audio fil e s 127 audio features 127 B backing up fi.
249 Index click 67 communications network connection 122 set up 120 system resources 176 compact disc positioning 94 compact discs handling 94 inserting 93 removing 97 computer caring for 79 cleaning .
250 Index warning resume failure 171 Error -checking 184 Ethernet LAN port 123 expansion memory slo t 52 exploring the desktop 117 ExpressCard inserting 131 removing 132 ex te rn al monitor not workin.
251 Index K ke ybo ard character ke ys 83 function keys 84 hot keys 212 not working 171 ov erlay ke ys 85 special W indo ws® keys 84 troubleshooting 181 using 83 ke yboard, external 69 ke ybo ard, fu.
252 Index port COM 120 Ethernet LAN 123 RGB 67 po wer computer will not start 171 connecting cable to A C adaptor 45 cord/cable connectors 213 ener gy-saving features 99 problem solving 17 9 turning o.
253 Index programs not running correct ly 184 projector 67 connecting 67 R real-time clock (R TC) battery 101 recording sounds 127 recording quality 128 recording sounds 127 recycle bin icon 118 regis.
254 Index using a file extension 90 Utilities 135 utilities Power Sa ver 149 V video projector adjusting d isplay 69 W war ran ty limited warranty 38 We b 125 We b C a m 129 We b s i t e s 203 Wi - F .
Ein wichtiger Punkt beim Kauf des Geräts Toshiba TECRA GMAD00134010 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba TECRA GMAD00134010 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba TECRA GMAD00134010 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba TECRA GMAD00134010 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba TECRA GMAD00134010 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba TECRA GMAD00134010 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba TECRA GMAD00134010 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba TECRA GMAD00134010. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba TECRA GMAD00134010 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
