Benutzeranleitung / Produktwartung TEC B-SX4T-QP des Produzenten Toshiba
Zur Seite of 53
TEC Thermal Printer B-SX4T-QQ/QP Ow ner’s Manual Mode d’emploi Bedienungsanleitung Manual de instrucciones Gebruikershandleiding Manuale Utente Manual do Utilizador.
CE Compliance (for EU onl y) This product complies with the requirements of EMC and Low Volt age Direct iv es including t heir amendments. VORSICHT: • Schallem ission: unt er 70dB (A) nach DIN 45635 (oder ISO 7779) • Die für das Gerät Vorgesehene Steckdose muß in der Nähe des Gerätes und leicht z ugänglich sein.
TEC Thermal Printer B-SX4T-QQ/QP Owner's Manual.
Safet y Summ a r y ENGLISH V E RS I ON EO1-33034 ( ) i 6DIHW6XPPDU Personal safety in handling or maintaining the equipment is extrem ely im portant.
Safet y Summ a r y ENGLISH V E RS I ON EO1-33034 ( ) ii If foreign objects (metal frag me nts, wa ter, liquids) ente r the ma chines, f irst turn off the powe r sw itches a nd disconnec t the powe r cord plugs from the outlet, and then c ontact y our authorised TOSHIBA TEC representat i ve for assistance.
ENGLISH VERSION EO1-33034 TABLE OF CONTENTS Page 1. PRODUCT OVERVIEW .......................................................................................................... E1 -1 1.1 Introduction ....................................................
ENGLISH VERSION EO1-33034 APPENDIX 1 SPECIFICATIONS................................................................................................. EA1-1 A1.1 Printer ...................................................................................
1. PRODUCT OVER VIEW ENGLISH VERSION EO1-33034 1.1 Introduc tion E1- 1 1. PRODUCT OVERVIEW 1.1 Introduction 1.2 Features 1.3 Unpacking Thank you for choosing the TEC B-SX4T series thermal printer.
1. PRODUCT OVER VIEW ENGLISH V E RS I ON EO1-33034 1.4 Acce ssories E1- 2 1.4 A ccessories When unpacking the printer, please mak e sure all the following accessories are supplied with the printer. US Power Cord (1 pc.) (P/No. FBCB0030203) QQ model only CD-ROM (1 pc.
1. PRODUCT OVER VIEW ENGLISH V E RS I ON EO1-33034 1.5 Appearance E1- 3 1.5 A ppearance 1.5.1 Dimensions 1.5.2 Front View 1.5.3 Rear View The names of the parts or units introduced in this section are used in the following chapters.
1. PRODUCT OVER VIEW ENGLISH V E RS I ON EO1-33034 1.5 Appearance E1- 4 1.5.4 Operation Panel 1.5.5 Interior Please see Section 3.1 for further information about the O peration Panel.
2. PRINTER SETUP ENGLISH VERSION EO1-33034 2.1 Precautions E2- 1 2. PRINTER SETUP 2.1 Precautions This section outlines the procedures to setup your printer prior to its operation. The section includes precautions, connecting cables, assembling accessories, loading media and ribbon, inserting the optional memory card, and perform ing a test print.
2. PRI NTE R SE TUP ENGLISH V E RS I ON EO1-33034 2.2 Procedure bef ore Operat ion E2- 2 2.2 Procedure before Operation 2.3 Fitting the Fan Filter This section describes the outline of the printer setup. 1. U npack the accessories and printer from the box.
2. PRINTER SETUP ENGLISH VERSION EO1-33034 2.4 Connecting the Cables to Your Printer E2- 3 2.4 Connecting the Cables to Your Printer The following paragraphs outline how to connect the cables from the printer to your host computer, and will also show how to make cable connections to other devices.
2. PRI NTE R SE TUP ENGLISH V E RS I ON EO1-33034 2.5 Connecti ng t he Power Cord E2- 4 2.5 Connecting the Pow er Cor d 1. Make sure that the printer Power Switch is in the O FF ( ) position. 2. Connect the Power Cord to the printer as shown in the figure below.
2. PRINTER SETUP ENGLISH VERSION EO1-33034 2.6 Turning the Printer ON/OFF E2- 5 2.6 Turning the Printer ON/OFF 2.6.1 Turning ON the Printer 2.6.2 Turning OFF the Printer When the printer is connected .
2. PRI NTE R SE TUP ENGLISH V E RS I ON EO1-33034 2.7 Loading the Media E2- 6 2.7 Loading the M e di a The following procedure shows the steps to properly load the media into the printer so that it feeds straight and true throug h the printer. The printer prints both labels and tags.
2. PRINTER SETUP ENGLISH VERSION EO1-33034 2.7 Loading the Media E2- 7 2.7 Loading the Media (Cont.) 5. Put the media on the Supply Shaft. 6. Pass the media around the Damper, then pull the media towards the front of the printer.
2. PRINTER SETUP ENGLISH VERSION EO1-33034 2.7 Loading the Media E2- 8 2.7 Loading the Media (Cont.) 10. Lower the Print Head Block until it stops. 11. After loading the media, it may be necessary to set the Media Sensors used to detect the print start position for label or tag printing.
2. PRI NTE R SE TUP ENGLISH V E RS I ON EO1-33034 2.7 Loading the Media E2- 9 2.7 Loadi ng the M edi a (Cont.) 12. There are four issue modes available on this printer.
2. PRI NTE R SE TUP ENGLISH V E RS I ON EO1-33034 2.7 Loading the Media E2-10 2.7 Loadi ng the M edi a (Cont.) Build-in rewinder mode The Rewinder Assembly of the Strip Module can be used in batch mode to take up the printed m edia as a Built- in Rewinder.
2. PRI NTE R SE TUP ENGLISH V E RS I ON EO1-33034 2.8 Loading the Ribbon E2-11 2.8 Loadi ng the Ribbon There are two types of m edia av ailable for printing on: these are therm al transfer media and direct therm al m edia (a chemically treated surface).
2. PRI NTE R SE TUP ENGLISH V E RS I ON EO1-33034 2.9 Insert ing the Opti onal P CMCIA Cards E2-12 2.9 Inserting the Optional PCMCIA Card s When the optional PCMCI A I nterface Board is installed into the printer, there will be two PCMCI A slots available as show n in the figure below.
2. PRI NTE R SE TUP ENGLISH V E RS I ON EO1-33034 2.10 Test P rint E2-13 2.10 Test Print A print test should be performed to check that the printer is operating correctly. The following paragraphs guide you through the diagnostic procedure for test label printing.
2. PRINTER SETUP ENGLISH VERSION EO1-33034 2.10 Test Print E2-14 2.10 Test Print (Cont.) 9. Press the [PAUSE] key and the issue mode setting display will appear. Select the issue mode with the [FEED] or [RESTART] key. 10. Press the [PAUSE] key and the media size setting display will appear.
2. PRINTER SETUP ENGLISH VERSION EO1-33034 2.10 Test Print E2-15 2.10 Test Print (Cont.) 19. When you have finished performing the test print operation, turn the printer’s power OFF then back to ON and check that the LCD Message Display shows ON LINE and that the ON LINE and POWER LED lights are illuminated.
2. PRINTER SETUP ENGLISH VERSION EO1-33034 2.10 Test Print E2-16 2.10 Test Print (Cont.) Sample of the bar code test print label Sample of the factory test label.
3. ON LINE M ODE ENGLISH V E RS I ON EO1-33034 3.1 Operation P anel E3- 1 3. ON LINE MODE 3.1 Operation Panel This chapter describes usage of the key s on the Operation Panel in On Line mode. When the printer is in On Line mode and connected to a host com puter, the normal operation of printing im ages on labels or tag s can be accomplished.
3. ON LINE MODE ENGLISH VERSION EO1-33034 3.2 Operation E3- 2 3.2 Operation 3.3 Reset When the printer is turned on, the “ ON LINE ” message appears on the LCD Message Display. It is shown during standby or normal printing. 1. The printer is turned on, standing by , or printing.
3. ON LINE MODE ENGLISH VERSION EO1-33034 3.4 Dump Mode E3- 3 3.4 Dump Mode In Dump mode, any characters sent from the host com puter will be printed. Received characters are expressed in hexadecimal values. This allows the user to verify programming com mands and debug the program.
4. MA INTENA NCE ENGLISH V E RS I ON EO1-33034 4.1 Cleaning E4- 1 4. MA INTENANCE 4.1 Cleaning 4.1.1 Print Head/Platen/ Sensors This chapter describes how to perform routine m aintenance. To ensure the continuous high quality operation of the printer, y ou should perform a regular m aintenance routine.
4. MA INTENA NCE ENGLISH V E RS I ON EO1-33034 4.1 Cleaning E4- 2 4.1.2 Cov ers and Panels 4.1.3 Optional Cutter Module Wipe the covers and panels with a dry soft cloth or a cloth slightly moistened with m ild detergent solution. The swing cutter and rotary cutter are av ailable as an option.
4. MAINTENANCE ENGLISH VERSION EO1-33034 4.2 Care/Handling of the Media and Ribbon E4- 3 4.2 Care/Handling of the Media and Ribbon • Do not store the media or ribbon for longer than the manufacturer’s recommended shelf life. • Store media rolls on the flat end.
5. TROUBLESHOOTING ENGLISH V E RS I ON EO1-33034 5.1 Error Messages E5- 1 5. TROUBLESHOOTING This chapter lists the error messag es, possible problems, and their solutions. 5.1 Error M essages Error Messages Problems/Causes Solutions HEA D OPEN The Print Head Block is opened in Online mode.
5. TROUBLESHOOTING ENGLISH V E RS I ON EO1-33034 5.2 Poss ible Problem s E5- 2 5.1 Er r or M essages (Cont.) Error Messages Problems/Cause Solutions NO PAPER **** 1. The media has run out. 2. The media is not loaded properly. 3. The media is slack . 1.
5. TROUBLESHOOTING ENGLISH V E RS I ON EO1-33034 5.3 Removi ng J amm ed Media E5- 3 5.3 Removing Jammed Media This section describes in detail how to remov e jamm ed media from the printer. 1. T urn off and unplug the printer. 2. Open the T op Cover. 3.
5. TROUBLESHOOTING ENGLISH V E RS I ON EO1-33034 5.4 Threshold S et ting E5- 4 5.4 Threshold Setting To maintain a constant print position the printer uses the Transmissiv e Sensor to detect the gap between labels by measuring the am ount of light passing through the m edia.
APPE N DIX 1 SPECIFI CATIONS ENGLISH V E RS I ON EO1-33034 A1.1 Prin ter EA1- 1 A PPENDIX 1 SPECIFICA TIONS Appendix 1 describes the printer specifications and supplies for use on the B- SX4T printer. A 1.1 Printer The following is the printer specifications.
APPE N DIX 1 SPECIFI CATIONS ENGLISH V E RS I ON EO1-33034 A1.2 Op tions EA1- 2 A 1.2 Options Option Name Type Description Swing cutter m odule B-4205- QM A stop and cut swing cutter.
APPE N DIX 1 SPECIFI CATIONS ENGLISH V E RS I ON EO1-33034 A1.3 M edia EA1- 3 A 1.3.1 Media Type (Cont.) [Unit: mm ] Cut mode Labe l dispensing mode Item Batch mode Strip mode Rotary cutter (*2) Swing cutter Labe l 10.0 – 1500.0 25.4 – 1500.0 3” /sec.
APPE N DIX 1 SPECIFI CATIONS ENGLISH V E RS I ON EO1-33034 A1.3 Media EA1- 4 A 1.3.2 Detection A rea of the Transmissive Sensor (Cont .) <Tag paper with square holes> A 1.3.3 Detection A rea of the Reflectiv e Sensor The Reflective Sensor is m ovable from the centre to the left edge of m edia.
APPE N DIX 1 SPECIFI CATIONS ENGLISH V E RS I ON EO1-33034 A1.4 Ribbon EA1- 5 A 1.3.4 Effective Print A rea (Cont.) The figure below shows the effectiv e print area on the m edia. A 1.4 Ri bbon Please mak e sure that the ribbon being used is approved by TOSHI BA TEC.
APPENDIX 2 MESSAGES AND LEDS ENGLISH VERSION EO1-33034 APPENDIX 2 MESSAGES AND LEDS EA2- 1 APPENDIX 2 MESSAGES AND LEDS Appendix 2 describes the LCD messages displayed on the operation panel. Symbols in the message 1: : The LED is illuminated. ~ : The LED is flashing.
APPENDIX 2 MESSAGES AND LEDS ENGLISH VERSION EO1-33034 APPENDIX 2 MESSAGES AND LEDS EA2- 2 N OTES: • If a command error is found in the command received, 16 bytes of the command error, starting from the command code, will be displayed. (However, [LF] and [NUL] will not be displayed.
APPENDIX 3 INTERFACE ENGLISH VERSION EO1-33034 APPENDIX 3 INTERFACE EA3-1 APPENDIX 3 INTERFACE Interface Cables To prevent radiation and reception of electrical noise, the interface cables must meet the following requirem ents: • Fully shielded and fitted with metal or metallised connector housings.
APPENDIX 4 PRINT SAMPLES ENGLISH VERSION EO1-33034 APPENDIX 4 PRINT SAMPLES EA4-1 APPENDIX 4 PRINT SAMPLES Font.
APPENDIX 4 PRINT SAMPLES ENGLISH VERSION EO1-33034 APPENDIX 4 PRINT SAMPLES EA4-2 APPENDIX 4 PRINT SAMPLES (Cont.) Bar codes JAN8, EAN8 MSI Interleaved 2 of 5 CODE39 (Standard) NW7 JAN13, EAN13.
APPENDIX 4 PRINT SAMPLES ENGLISH VERSION EO1-33034 APPENDIX 4 PRINT SAMPLES EA4-3 APPENDIX 4 PRINT SAMPLES (Cont.) UPC-A+5 digits UCC/EAN128 Industrial 2 of 5 POSTNET Customer bar code Customer bar co.
GLOSSARIES ENGLISH VERSION EO1-33034 GLOSSARIES GLOSSARIES Bar code A code which represents alphanumeric characters by using a series of black and white stripes in different widths. Bar codes are used in various industrial fields: Manufacturing, Hospitals, Libraries, Retail, Transportation, Warehousing, etc.
GLOSSARIES ENGLISH VERSION EO1-33034 GLOSSARIES Pre-printed media A type of media on which characters, logos, and other designs have been already printed.
INDEX ENGLISH VERSION EO1-33034 INDEX INDEX A Auto ribbon saving 2-11 B Backing paper A1-3 Bar code A1-1 Batch mode 2-9 Black mark 2-8, A1-2, A1-4 Black mark length A1-3 Black mark sensor 2-8, 4-1 Bui.
INDEX ENGLISH VERSION EO1-33034 INDEX S Serial interface 1-3 Strip mode 2-9 Strip module 2-9, A1-2 Supply voltage A1-1 T Tag A1-2 Test print 2-13 Thermal direct 2-13, A1-1 Thermal transfer 2-13, A1-1 .
M EO1-33034.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba TEC B-SX4T-QP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba TEC B-SX4T-QP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba TEC B-SX4T-QP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba TEC B-SX4T-QP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba TEC B-SX4T-QP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba TEC B-SX4T-QP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba TEC B-SX4T-QP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba TEC B-SX4T-QP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba TEC B-SX4T-QP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
