Benutzeranleitung / Produktwartung SD-V594SC des Produzenten Toshiba
Zur Seite of 76
2 16 27 34 39 44 Introduction 47 50 63 71 DVD VIDEO PLA YER & VIDEO CASSETTE RECORDER SD-V594SC OWNER’S MANUAL ©2006 T oshiba Corporation This device does not tape-record copy protected DVD Video Discs.
2 Introduction SAFETY PRECAUTIONS W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain or moisture. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED T O PREVENT BLADE EXPOSURE.
3 Introduction 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RET AIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED W ARNINGS All warnings on the unit and in the operating instructions should be adhered to.
4 Introduction IMPOR T ANT SAFEGU ARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.
5 Introduction 19. REPLACEMENT P ARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
6 Introduction Notes on handling When shipping the DVD/VCR, the original shipping carton and packing materials come in handy . For maximum protection, repack the unit as it was originally packed at the factory . Do not use volatile liquids, such as insect spray , near the DVD/VCR.
7 Introduction Notes and Informations On handling discs Do not touch the playback side of the disc. Do not attach paper or tape to discs. On cleaning discs Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth.
8 Introduction Notes and Informations (Continued) Notes on copyright The unauthorized recording, use, distribution, or revision of copyrighted materials including, without limitation, television progr.
9 Introduction SAFETY PRECAUTIONS ................................ 2 IMPORTANT SAFEGUARDS .......................... 3 Power source ................................................... 5 Precautions .....................................................
10 Introduction Identification of controls See the page in for details. Front panel ON/ST ANDBY button AUDIO (L/R)/VIDEO IN (LINE IN 2) jacks EJECT button Disc tray Display window 11 REC button CHANNE.
11 Introduction VCR operation status CH 125 8 : 47 AM MON 00 : 00 : 00 SP STEREO SAP While watching TV DAY OF THE WEEK CHANNEL TAPE SPEED REAL TIME COUNTER CLOCK STEREO AND SECOND AUDIO PROGRAM (SAP) .
12 Introduction Identification of controls (Continued) Remote contr ol D VD MENU button Use the MENU button to display the menu included on many DVD video discs. T o operate a menu, follow the instructions in “DVD Menu.” The instructions in this manual describe the functions on the remote control.
13 Introduction Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30 ° angle on either side of the remote sensor , up to a distance of approx. 7 meters. Replace the compartment cover .
14 Introduction Multi brand remote control This remote control can be compatible with various brands of TV/ Cable box/DSS ® satellite receiver by setting their control codes.
15 Introduction Ta b le of Cable bo x brand codes Setting Cable bo x/DSS ® satellite receiver contr ol codes Press CABLE BOX to set the remote control operating your Cable box/DSS ® satellite receiver.
16 Connections Notes: • A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the antenna to the DVD/VCR properly . • For better quality recording, an indoor antenna or a telescopic antenna is not recommended.
17 Connections UHF VHF UHF VHF VHF/UHF IN Note: If a VHF or UHF antenna is used, set the TV/CABLE menu option to the “TV” mode. Note: If a VHF or UHF antenna is used, set the TV/CABLE menu option to the “TV” mode. Note: If a VHF or UHF antenna is used, set the TV/CABLE menu option to the “TV” mode.
18 Connections Cable TV connections VHF/UHF IN (ANT) VHF/UHF IN (ANT) VHF/UHF IN (ANT) Many cable companies of fer services permitting reception of extra channels including pay or subscription channels.
19 Connections VHF/UHF IN (ANT) A B VHF/UHF IN (ANT) A B This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler . In order to receive scram- bled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies.
20 Connections Connecting to a TV Connect the DVD/VCR to your TV . To VIDEO OUT To ANALOG AUDIO OUT (red) (white) (yellow) Signal flow To wall outlet To video input (yellow) (red) Audio/video cable (supplied) To audio inputs (white) Notes: • Refer to the owner ’s manual of the connected TV as well.
21 Connections Notes: • Refer to the owner ’s manual of the connected equipment as well. • When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
22 Connections About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV , set-top boxes, and other A V devices.
23 Connections USER setting/operation Content of output for each output jack Mode VCR/DVD HDMI Output *1 HDMI Output Setting Video S-Video Component RF Modulator VCR VCR VCR DVD DVD DVD 480p (DVD) 480.
24 Connections Connecting to an audio equipment Y ou can enjoy high quality dynamic sounds of DVD video discs or audio CDs by connecting the DVD/VCR to optional audio equipment.
25 Connections 75 Ω coaxial cable (not supplied) 75 Ω coaxial cable (not supplied) W arning When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo jacks.
26 Connections Connecting to a USB Mass Storage Signal flow To USB port USB Cable (not supplied) USB Mass Storage Connecting to a USB Mass Storage Notes: In order to avoid damage to the unit, the USB Mass Storage, the Memory Card, etc, the following instructions should be observed.
27 Basic setup (VCR) Setting the video channel When a TV is connected with the 75 ohm coaxial cable only . To view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR's channel selector , the TV must be set to channel 3 or 4 (video channel).
28 Basic setup (VCR) Press SET + or – to select “LANGUAGE”, then press ENTER. Press VCR MENU. The VCR menu screen will appear . Press SET + or – to select “SYSTEM SETUP”, then press ENTER . If you use the unit for the first time, press VCR MENU , instead of the “SYSTEM SETUP” menu screen of the main screen in step 2 may appear .
29 Basic setup (VCR) Connect the Antenna or Cable system. • If you use a cable box, turn it on. Clock setting The AUTO CLOCK function will automatically set the built-in clock (Month, Day , Y ear and T ime) when the DVD/VCR is connected to an Antenna or Cable system and it is turned off.
30 Basic setup (VCR) Press VCR MENU . 1 Press SET + or – to select “SYSTEM SETUP”, then press ENTER. 2 Press SET + or – to select “ST ANDARD TIME” , then press ENTER. 3 Press SET + or – to select your time zone, then press ENTER. 4 Press VCR MENU until the men u screen is c leared.
31 Basic setup (VCR) CANCEL Press VCR MENU. EXAMPLE: Setting the clock to “8:30 AM” October , 28 (SA T), 2006. 1 8 : 30 AM SAT Manual c lock setting After setting the clock, date and time starts functioning automatically . 6 Note: After a power failure or disconnection of the power, the timer settings will be lost.
32 Basic setup (VCR) T uner setting This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory , skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory .
33 Basic setup (VCR) Repeat the step 1 on page . Then press SET + or – to select the “ADD/DELETE” and press ENTER. 1 To ADD/DELETE channels Press VCR MENU until the menu screen is c leared. 3 To Add or Delete channels 2 1) Press Direct channel selection buttons (0–9) or SET +/– to select a channel number you want to add or delete.
34 Playback (VCR) Loading and unloading a cassette tape Use only video cassette tapes marked . Loading Remove the erase prevention tab with a screwdriver. Cover the hole with a piece of adhesive tape. To record again Screwdriver Automatic tape eject This DVD/VCR will automatically rewind the tape when the tape has ended.
35 Playback (VCR) Cassette tape playback To play a prerecorded tape. Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically). Preparation: •T urn ON the TV and select the corresponding video input.
36 Playback (VCR) Special playback Picture sear ch Reverse picture search function Press REV once or twice during playback. Forward picture search function Press FWD once or twice during playback. To return to playback, press PLAY . Press PAUSE/STILL during playback.
37 Playback (VCR) COUNTER RESET Convenience function To cancel repeat mode : Follow the above step 1 , then press ENTER to select “OFF” position. Press VCR MENU to return to the TV . Press VCR MENU . Press SET + or – to select “AUTO REPEA T”.
38 Playback (VCR) This function enables you to locate the beginning of any recording made on the VCR. Recording an INDEX mark The Index Search function auto- matically records an INDEX mark on the tape whenever a recording is initiated. Index search Press VISS + or – during stop or play mode.
39 Recording (VCR) Recording a TV program Recording and viewing the same TV program. Recording a TV pr ogram Load a cassette tape with the erase prevention tab intact. The DVD/VCR will automatically turn on. 1 Press SP/SLP to select the desired tape speed SP or SLP .
40 Recording (VCR) Press STOP to stop recording. “ ” will appear on screen for about 4 seconds. Press PAUSE/STILL to avoid recording unwanted material. Press again to continue the recording. “ ” will appear on screen for about 4 seconds. Notes: • The pause function will be released after 5 minutes to prevent damage to the tape or the VCR.
41 Recording (VCR) One-touch T imer Recording (O TR) The One-touch T imer Recording feature provides a simple and convenient way to make a timed recording.
42 Recording (VCR) T imer recording T imer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. Timer recor ding Notes: • Press CANCEL to move cursor backward for correction.
43 Recording (VCR) Setting procedure To set daily/weekly timer To confirm Timer program: At step 1 on page 42 , select “TIMER REC SET” and press ENTER .
44 Other functions (VCR) Stereo recording and playback/ Second A udio Program (SAP) When a MTS STEREO broad- cast is received, “STEREO” will appear on the screen for about 4 seconds and the program can be viewed or recorded in stereo. The Hi-Fi stereo recording pro- cedure is the same as for normal recordings.
45 Other functions (VCR) To AUDIO (L) OUT AUDIO/VIDEO cable (supplied) Playback VCR To VIDEO OUT To AUDIO (R) OUT Recording VCR To AUDIO (L) IN To VIDEO IN To AUDIO (R) IN Duplicating a video tape If you connect the DVD/VCR to another VCR or Camcorder , you can duplicate a previously recorded tape.
46 Other functions (VCR) Press REC/O TR to star t recording. The DVD/VCR will change to the VCR mode automatically and the playback picture or sound will be duplicated on the video cassette tape. Recording a D VD/CD disc Y ou can record disc material in DVD, Video CD, Audio CD, etc.
47 Basic playbac k (D VD) Basic playbac k (D VD) CA UTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury . Basic pla yback Playing a disc This section shows you the basics on how to play a disc.
48 Basic playbac k (D VD) To pause playback (still mode) Press PA USE/STILL during playback. To resume normal playback, press PLA Y . • The sound is muted during still mode.
49 Basic playbac k (D VD) Playing a disc (Continued) Y ou can play discs at various speeds. Pla ying frame by frame DVD VCD DVD VCD Pla ying in fast reverse or fast f orwar d directions Press REV or FWD during playback. REV : Fast reverse playback FWD : Fast forward playback Each time you press REV or FWD , the playback speed changes.
50 Adv anced playback (D VD) Zooming 1 2 Press ZOOM during playback. The center part of the image will be zoomed in. Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0). Zooming/Locating desired scene This unit will allow you to zoom in on the frame image.
51 Adv anced playback (D VD) Marking the scenes Returning to the scenes 1 Press MARKER during playback or stop mode. 2 1 3 Marking desired scenes The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene.
52 Adv anced playback (D VD) Repeat pla yback 1 Press PLAYMODE during playback or stop mode. Repeat playback/A-B Repeat playback Press PLAYMODE again to clear the screen. 3 A-B Repeat pla yback 1 Press A-B RPT during playback. The start point is selected.
53 Adv anced playback (D VD) Program pla ybac k Press PLAYMODE during stop mode. 1 Press B B B B B / A A A A A to return to the left column, then press C C C C C / D D D D D to select the “Program Playback” and press ENTER. The programs you selected will start to playback in the order.
54 Adv anced playback (D VD) Press C C C C C / D D D D D / B B B B B / A A A A A to select the desired title. Changing angles/T itle selection/D VD menu Press ANGLE during playback. The current angle will appear. When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
55 Adv anced playback (D VD) Changing soundtrack language/ Setting surround sound Changing soundtrac k language 1 Press AUDIO during playback. The current soundtrack language will appear. You can select the language when you play a multilingual disc. In case of Video CD playback Audio type changes as follows each time you press AUDIO .
56 Adv anced playback (D VD) Subtitles/T o turn off the PBC When playing back a disc recorded with subtitles, you can select the subtitle language or turn the subtitle off. To turn off the subtitle, press SUBTITLE until “Off” appears. • The on screen display will disappear after a few seconds.
57 Adv anced playback (D VD) MP3/WMA/JPEG/DivX ® and A udio CD operation This player can playback the MP3/WMA/JPEG/DivX ® -data which has been recorded on CD-R/RW or USB Mass Storage.
58 Adv anced playback (D VD) MP3/WMA/JPEG/DivX ® and A udio CD operation (Continued) A file browser screen will be appear on the screen. • In case the current directory includes 9 files or more, press or to scroll in the file list. • To see contents in folder, select the folder and then press ENTER .
59 Adv anced playback (D VD) The slide show enables you to view pictures (files) one after another automatically . Preparation: Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds” or “15 Seconds” . In the file browser, press C / D to select the desired JPEG file.
60 Adv anced playback (D VD) 1 3 2 ▲ / ▼ ENTER PLA Y STOP MP3/WMA/JPEG/DivX ® and A udio CD operation (Continued) Press C / D to select desired DivX ® file. Press ENTER or PLAY. The selected DivX ® movie will be played back on the screen. Press STOP to end playback.
61 Adv anced playback (D VD) Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 Select Files Repeat :Off Mode :Off Folder-1 Folder-2 MP3-1 MP3-2 MP3 3 Select Files Repeat :Track Mode :Off Repeat playback (CD/USB) In the file browser, press B / A or C / D to select “Repeat” during stop mode.
62 Adv anced playback (D VD) Folder-1 Folder-2 MP3-1 MP3-2 MP3 3 Repeat :Off Mode :Off Edit Mode Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA 2 JPEG Previe w Repeat :Off Mode :Off Edit Mode Folder-1 .
63 Function setup (D VD) ENTER C / D / B / A SETUP RETURN Setting procedure DVD VCD CD Customizing the function settings You can change the default settings to customize performance to your preference. Press SETUP during stop mode. The following on-screen display appears.
64 Function setup (DVD) Customizing the function settings (Continued) Section Option Menu Subtitle Audio E.B.L. TV Screen Display Picture Mode JPEG Interval Screen Saver DRC QSound Digital Out Parenta.
65 Function setup (D VD) Menu, Subtitle, Audio You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. English, Francais, Espanol: The selected language will be heard or seen. Other: Other language can be selected (see the “Language code list” 71 ).
66 Function setup (DVD) Customizing the function settings (Continued) JPEG Interval You can continuously playback all JPEG files automatically. After the selection below, the disc will start playback on which JPEG files have been recorded. Off: Plays back one file at a time.
67 Function setup (D VD) Parental : Off Set Passw ord Output : Interlace DivX(R) VOD Menu : English Subtitle : English Audio : English E.B.L. : Off TV Screen : 4:3 Display : On Picture Mode : Auto JPEG Interval : 5 Seconds Screen Saver : On DRC : Off QSound : Off Digital out : PCM QSound This DVD video player equipped with a “QSound”.
68 Function setup (DVD) Customizing the function settings (Continued) DRC : Off QSound : On Menu : English Subtitle : English Audio : English E.B.L. : Off TV Screen : 4:3 Display : On Picture Mode : A.
69 Function setup (D VD) Output You can select the video output signal of the DVD video player to the TV from “Interlace” or “Progres- sive”. Interlace: Select when connecting to a composite TV or a TV equipped with component video inputs but progressive scan is not compatible.
70 Function setup (D VD) T emporary disabling of r ating lev el by D VD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. Load a DVD disc and press PLAY or OPEN/ CLOSE on the unit .
71 Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” . Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Afar 1111 .
72 Others Tr oubleshooting Before calling a service technician, please check the following table for a possible cause of the symptoms and some solutions. Symptoms Solutions • Make sure the power cord is plugged in. • Try another AC outlet. • Unplug unit, then plug it back in.
73 Others Specifications AC 120 V 60 Hz Operation: 20 W , Stand by: 2 W 7.7 lbs (3.5 kg) Width: 16-15/16 inches (430.6 mm) Height: 3-9/16 inches (89.7 mm) Depth: 9 inches (228.
74 Others - IMPORT ANT - CANADIAN W ARRANTY INFORMA TION GARANTIE CANADIENNE ST ANDARD W ARRANTY TYPE OF SET DVD Player DVD/VCR Combination Home Theatre in a Box DVD Recorder Portable DVD W ARRANTY PERIOD 12 MONTHS CANADIAN W ARRANTY T oshiba of Canada Limited (TCL) makes the following limited warranties to original consumers in Canada.
75 Others Memo ................................................................................................................................... ........................................................................................................
Printed in Thailand ColorStream and ColorStream Pro are registered trademarks of T oshiba America Consumer Products, L.L.C. 2I40301A-En_p70-BACK 21/3/06, 9:46 AM 76.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba SD-V594SC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba SD-V594SC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba SD-V594SC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba SD-V594SC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba SD-V594SC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba SD-V594SC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba SD-V594SC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba SD-V594SC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba SD-V594SC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
