Benutzeranleitung / Produktwartung RAV-SM2242DT-E des Produzenten Toshiba
Zur Seite of 41
AIR CONDITIONER (SPLIT TYPE) Indoor Unit Model name: Concealed Duct Hi gh Static Pressure Type RAV-SM2242DT-E RAV-SM2802DT-E Installation Manual Installation Manual Air conditioner (Sp lit type) 1 Eng.
–1– Concealed D uct High Static P ressure Installation Ma nual Original instru ction Contents 1 PRECAUTIONS FOR SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 ACCESSORY PARTS . . . . . . . . . . .
–2– Concealed D uct High Static P ressure Installation Ma nual EN Thank you for purchasing this Toshiba air co nditioner. Please read carefully through these instructi ons that contain important information which comp lies with the “Machinery” Directive (Directive 2006/42/EC), and ensure that you under stand them.
–3– Concealed D uct High Static P ressure Installation Ma nual Definition of Pr otective Gear When the air conditioner is to be transported, inst alled, maintained, repaired or removed, w ear protective gloves and ‘safety’ work clothing.
–4– Concealed D uct High Static P ressure Installation Ma nual EN ! Warning Indication s on the Air Condit ioner Unit Warning indic ation Description WARNING ELECTRICA L SHOCK HAZ ARD Disconnect all re mote electric po wer supplies be fore servicin g.
–5– Concealed D uct High Static P ressure Installation Ma nual 1 PRECAUTIONS FO R SAFETY WARNING General • Before starting to install the air conditioner, read carefully through the Installation Manual, and follow its instructions to install the air conditioner.
–6– Concealed D uct High Static P ressure Installation Ma nual EN Refrigerant pip ing • Install the refrigerant pipe securely during the in stallation work before operating the air conditione r.
–7– Concealed D uct High Static P ressure Installation Ma nual CAUTION New Refrigerant Ai r Conditione r Installa tion • THIS AIR CONDITIONER ADOPTS TH E NEW HFC REFRIGERANT (R410A) WHICH DOES NOT DEST ROY OZONE LAYER.
–8– Concealed D uct High Static P ressure Installation Ma nual EN 2 ACCESSORY PARTS Part name Q’ty Shape Usage Installation Manu al 2 This manual (Be sure to ha nd over to custo mers) (For other lang uages that d o not appear in this Installation M anual, please refer to the enclosed CD- R.
–9– Concealed D uct High Static P ressure Installation Ma nual 3 SELECTION OF I NSTALLATION P LACE Upon approval of the customer, install the air conditioner in a place that satisfies the following conditions. • Place where the unit can be instal led horizontally.
– 10 – Concealed D uct High Static P ressure Installation Ma nual EN ! Installation spa ce (Unit: mm) Reserve space required for maintenance the i ndoor unit and service wo rk. REQUIREMENT 1. Attach the optional accessories (drain-up kit etc.) on the u nit before installing the unit.
– 11 – Concealed D uct High Static P ressure Installation Ma nual 4 INSTALLATION WARNING • Install the air conditioner certainly to sufficiently withstand the weight. • If the strength is insufficient, t he unit may fall down resulting in human injur y.
– 12 – Concealed D uct High Static P ressure Installation Ma nual EN ! Installation of h anging bolt • Consider the piping/wiring aft er the unit is hung when determining the location o f the indoor unit i nstallation and orientation. • After the location of the indoor unit installation has been determined, install hanging bolts.
– 13 – Concealed D uct High Static P ressure Installation Ma nual ! Diagrams for maki ng connecting fl anges (Unit: mm) The connecting flange (Incl. the fix ing screw) is not supplied to the indoor unit. When the connecting flange is necessary, produce them in locally.
– 14 – Concealed D uct High Static P ressure Installation Ma nual EN ! Duct design 1. I n order to prevent short circuits, design the duct installation, so that the intake and d ischarge openings are not adjacent to each ot her. 2. The indoor unit does not have a bu ilt-in air filter.
– 15 – Concealed D uct High Static P ressure Installation Ma nual 5 FAN CHARACTERIS TICS Current value as a criterion, adjust the air volu me value to become within the range of the chart below.
– 16 – Concealed D uct High Static P ressure Installation Ma nual EN REQUIREMENT Add a air volume damper to the air supply duct, and ad just the air volume in the range from 80% to 120% of the standard air volume. <RAV-SM2802 Type> 4 4.5 5 5.
– 17 – Concealed D uct High Static P ressure Installation Ma nual ! Wire connectio n change of fan motor This duct is composed of 3 fan motors. To change external static pressure by duct resistanc.
– 18 – Concealed D uct High Static P ressure Installation Ma nual EN 6 DRAIN PIPING W ORK CAUTION Following t he Instal lation Manual, perform the drain piping work that w ater i s properly drained, and apply a heat insulation not to cause a dew condensation.
– 19 – Concealed D uct High Static P ressure Installation Ma nual ! Pipe material, siz e and insulator The following materials for piping work an d insulating process are procured locally.
– 20 – Concealed D uct High Static P ressure Installation Ma nual EN ! Check the drainin g Check if the water can flow out properly during the test run. Also, check if no water leakage fro m the piping connection port. REQUIREMENT • Do drain test even if installat ion of heating season.
– 21 – Concealed D uct High Static P ressure Installation Ma nual ! Heat insulating p rocess • After drain check, covering t he heat insulator for drain connecting section, wrap the drain pi pe with heat insulator (Locally procured) without clearance from the end of the d rain pipe connecting port of the indoor unit.
– 22 – Concealed D uct High Static P ressure Installation Ma nual EN 7 REFRIGERANT PIPIN G AND EVACUATING ! Refrigerant Pip ing 1. I f the outdoor units are to be m ounted on a wall, make sure tha t the support ing platform is su fficiently strong.
– 23 – Concealed D uct High Static P ressure Installation Ma nual Tightening connect ion CAUTION Do not apply excessive torque. Otherwise, the nut may crack depending on the conditions. ▼ Tightening torque of flare pipe connections Pressure of R410A is higher than that of R22.
– 24 – Concealed D uct High Static P ressure Installation Ma nual EN Refrigerant amount to be added For addition of the refrigerant, add refri gerant “R410A” referring to the attached Installati on Manual of outdoor unit. Be sure to use a scale to charge the refriger ant of specified amount.
– 25 – Concealed D uct High Static P ressure Installation Ma nual 8 ELECTRICAL CONNECTI ON WARNING 1. Using the speci fied wires, ensure to con nect the wires, a nd fix wires secure ly so that the external tensi on to the wires do not affect the connecting part o f the terminals .
– 26 – Concealed D uct High Static P ressure Installation Ma nual EN ! Wire connection REQUIREMENT • Be sure to connect the wires matching the terminal numbers. Incorre ct connection causes a trouble. • Be sure to pass the wires through th e bushing of wire connection holes of the indoor unit.
– 27 – Concealed D uct High Static P ressure Installation Ma nual ! Remote Controll er Wiring • Strip off approx. 9mm the wire to be connected. • Non polarity, 2 core wire is used for wiring of the remote controller.
– 28 – Concealed D uct High Static P ressure Installation Ma nual EN 9 APPLICABLE CON TROLS REQUIREMENT • When you use this air conditioner for the first time, it takes approx. 5 minutes until the remote controller becomes available after power-on.
– 29 – Concealed D uct High Static P ressure Installation Ma nual Procedure 6 When settings have been completed, push button to determine the settings. When b utton is pushed, “S ETTING” flashes and th en the display content disappears and the air conditioner ente rs the normal stop mode.
– 30 – Concealed D uct High Static P ressure Installation Ma nual EN ! Remote controller switch monitoring function This function is available to call the service monitor mode from the remote controller durin g a test run to acquire temperatures of sensors of the r emote controller, indoor unit, and outdoor unit.
– 31 – Concealed D uct High Static P ressure Installation Ma nual ! Group control Group control for system of mu ltiple units One remote controller can co ntrol up to 8 indoor units as a group.
– 32 – Concealed D uct High Static P ressure Installation Ma nual EN Procedure exampl e 1 Manual address setup procedure While the operation stops, change the set up. (Be sure to stop the operation of the unit.) Procedure 1 Push simultaneously + + buttons for 4 seconds or more.
– 33 – Concealed D uct High Static P ressure Installation Ma nual Procedure 6 If there is other i ndoor unit to be changed, repe at procedure 2 to 5 to change the setup. When the above setup has finishe d, push to select the indoor UNIT No. before change of setup, specify COD E No.
– 34 – Concealed D uct High Static P ressure Installation Ma nual EN ! 8°C Operation Pre-heating operation can be set for cold regions where room temperature drops to below zero. Procedure 1 Push simultaneously + + buttons for 4 seconds or more when the air conditioner is not working.
– 35 – Concealed D uct High Static P ressure Installation Ma nual 10 TEST RUN ! Before test run • Before turning on the power supply, carry out the following procedure. 1) Usi ng 500V-megger, check that resistance of 1M ! or more exists between the terminal block 1 to 3 and the earth (grounding).
– 36 – Concealed D uct High Static P ressure Installation Ma nual EN 11 MAINTENANCE CAUTION When connecting a return air duct to the unit , the cleaning method of the air filter differs acco rding to the construction of duct end. Ask a qualified installer or qualified service person.
– 37 – Concealed D uct High Static P ressure Installation Ma nual Maintenance List Part Unit Check (visual/au ditory) Maintenance Heat exchange r Indoor/ outdoor • Dust/dirt clogging, scratches • W ash the heat ex changer whe n it is clogged.
– 38 – Concealed D uct High Static P ressure Installation Ma nual EN 12 TROUBLESHOOTI NG ! Confirmation an d check When an error occurred in the air conditioner, an error code and indoor UNIT No. appear on the display part of the remote controller.
– 39 – Concealed D uct High Static P ressure Installation Ma nual ! Error codes and pa rts to be checked Wired remote controller display Main defective par ts Judging device Parts to be checked / .
– 40 – Concealed D uct High Static P ressure Installation Ma nual EN : The air conditioner automatically enters the auto-address setting mod e. L20 LAN communicat ion error Network adapter central.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba RAV-SM2242DT-E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba RAV-SM2242DT-E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba RAV-SM2242DT-E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba RAV-SM2242DT-E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba RAV-SM2242DT-E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba RAV-SM2242DT-E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba RAV-SM2242DT-E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba RAV-SM2242DT-E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba RAV-SM2242DT-E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
