Benutzeranleitung / Produktwartung MD24F51 des Produzenten Toshiba
Zur Seite of 56
COMBIN A TION FLA T COLOR TELEVISION AND D VD VIDEO PLA YER OWNER’S MANUAL 2 13 18 28 31 41 Introduction Connections Basic setup Basic playback Advanced playback Function setup DIGITAL VIDEO ©2005 T oshiba Corporation 47 Others Before operating the unit, please read this manual thoroughly .
2 Introduction CAUTION: THIS DIGIT AL VIDEO PLA YER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT , PLEASE READ THIS OWNER'S MANUAL CAREFULL Y AND RET AIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONT ACT AN AUTHORIZED SERVICE LO- CA TION.
3 Introduction 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RET AIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED W ARNINGS All warnings on the unit and in the operating instructions should be adhered to.
4 Introduction IMPORT ANT SAFEGUARDS (Continued) 14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall onto or against such power lines or circuits.
5 Introduction EXAMPLE OF ANTENNA GROUNDING AS PER THE NA TIONAL ELECTRICAL CODE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ANTENNA LEAD IN WIRE GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, P AR T H) GROUND CLAMP ELECTRIC SERVICE EQUIPMENT 28.
Introduction 6 Notes on moisture condensation Moisture condensation damages the unit. Please read the follo wing carefully . Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day . Drops of water form on the outside of the glass.
Introduction 7 Structure of disc contents Normally , DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks.
8 Introduction DIGITAL VIDEO Playable discs This unit can play the following discs. •Y ou cannot play discs other than those listed above. •Y ou cannot play discs of DVD-RAM, DVD-ROM, Photo CD, etc., or non standardized discs even if they may be labeled as above.
9 Introduction Contents Introduction IMPORT ANT SAFEGUARDS ............................ 2 Precautions ....................................................... 6 Notes on discs ................................................... 7 Contents .............
10 Introduction Front Rear Identification of controls See the page in for details. Illustration of MD24F51 Remote sensor 12 HEADPHONE jack 21 Disc tray POWER indicator 20 POWER button 18 28 AUDIO (L/R.
11 Introduction Remote control The instructions in this manual describe the function on the remote control. See the page in for details. *DVD MENU button Use the DVD MENU button to display the menu included on many DVD video discs. To operate a menu, follow the instructions in “DVD menu.
12 Introduction 12 3 • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30 ° angle on either side of the remote sensor , up to a distance of approx. 5 meters. Replace the compartment cover .
13 Connections 75 ohm coaxial cable (not supplied) 300-75 ohm matching transformer (supplied) 300-75 ohm matching transformer (supplied) UHF 300 ohm twin-lead wire (not supplied) VHF 300 ohm twin-lead.
14 Connections For basic cable service not requiring a converter/descrambler box, connect the Cable TV 75 ohm coaxial cable directly to the Antenna jack on the back of the TV/DVD.
15 Connections Connecting to optional equipment You can enjoy VCR, camcorder or TV game with connection to external input. To select the external input, press INPUT and select “LINE1” or “LINE2” mode. INPUT GAME Using the audio/video inputs Press INPUT repeatedly to select the desired mode.
16 Connections Connecting to optional equipment (Continued) Y ou can enjoy high quality dynamic sounds by connecting the TV/DVD to optional audio equipment. : Front speaker : Rear speaker : Sub woofer : Center speaker : Signal flow * This section uses the following reference mark.
17 Connections MPEG2 sound Y ou can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor .
18 Starting setup The STARTING SETUP function makes installing your TV/DVD easily. It leads you the Language selection, TV/CABLE selection and auto channel memory automatically. IMPORTANT: Make sure that the antenna or cable TV system connection is made! Starting setup Press or to select “TV” or “CABLE”, then press ENTER.
19 Notes: • If the unit does not operate properly , or No key operation (by the unit and/or the remote control): Static electricity , etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again. • The TV section has its own menu and also DVD section has its own menu 41 .
20 TV operation TV operation Adjust the volume level by pressing VOL + or –. The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases.
21 TV operation ■ CHANNEL UP/DOWN Press and release CH or . The channel automati- cally stops at the next channel set into memory . For proper operation, before selecting channels, they should be set into the memory . See page 23 “T o memorize channels”.
22 TV operation Closed captions Captions: This closed caption mode will display text on the screen in English or another language (depending on the setting of the closed captions CH 1/2). Generally , closed captions in English are transmitted on captions channel 1 and closed captions in other languages are transmitted on captions channel 2.
23 TV operation / / / MENU Press or to select “TV/CABLE”. 1 2 Press MENU in the TV mode, then press or to select option. Press MENU repeatedly until the menu screen is cleared.
24 TV operation To register password Notes: • If you forget the password, you cannot set the V -Chip. •T o avoid forgetting the password, write it down and keep in the safe place. Press or to select “PASSWORD”. 1 2 Press MENU, then press or to select option.
25 TV operation Press or to select “MOVIE RATING”. 1 3 In the V -CHIP menu, press or to select “V -CHIP SET”, then press . Press or to select desired rating.
26 TV operation 4 Press or to select the desired picture mode, then press ENTER. 3 PICTURE PREFERENCE ST AND ARD SPORTS MO VIE MEMOR Y // ENTER / MENU After your desired setting press MENU repeatedly until the menu screen is cleared. Press or to select “PICTURE”, then press .
27 TV operation AUDIO SELECT Sound control adjustment/ Stereo and Second A udio Program (SAP) Sound controls are factory preset but you can adjust them individually as follows: The TV/DVD is equipped with a feature known as multi-channel TV sound or MTS.
28 Basic playback DVD VCD CD Preparations: • Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. If the AC cord plug is plugged in for the first time, you need to set “Starting setup” 18 . • When connecting to other equipment, turn power off.
29 Basic playback To pause playback (still mode) Press PA USE during playback. To resume normal playback, press PLA Y . • The sound is muted during still mode. To stop playbac k Press ST OP . To remove the disc Press OPEN/CLOSE . Remove the disc after the disc tray opens completely .
30 Basic playback Playing frame by frame Playing in fast reverse or fast forward directions Press REV or FF during playback. REV : Fast reverse playback FF : Fast forward playback Each time you press REV or FF , the playback speed changes. To resume normal playback Press PLA Y .
31 Advanced playback Press / / / to view a different part of the frame. You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction. In the zoom mode press ZOOM repeatedly to return to a 1:1 view ( Off). Press JUMP during playback or stop mode.
32 Adv anced playback Marking the scenes Returning to the scenes 1 Press MARKER during playback or stop mode. 2 1 3 Marking desired scenes The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene.
33 Advanced playback [Audio CD, Video CD, MP3/WMA CD] Press D D D D D to select “Repeat”. Press B B B B B / A A A A A to select “Track” or “All”. The unit automatically starts repeat playback after finishing the current track. • If you set the repeat mode during stop mode, press PLA Y to start Repeat playback.
34 Advanced playback Program playback/Random playbac k You can arrange the playback order of tracks or files on the disc. And also the unit selects tracks or files at random and playback them. These feature works for Audio CD, Video CD and MP3/WMA/JPEG CD.
35 Advanced playback Changing angles ANGLE ENTER ▲ / ▼ / / TO P MENU PLA Y DVD MENU T itle selection DVD menu Press ANGLE during playback. The current angle will appear. When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
36 Advanced playback 1 2 Press AUDIO SELECT during playback. The current soundtrack language will appear. Press AUDIO SELECT repeatedly until the desired language is selected. • The on screen display will disappear after a few seconds. Changing soundtrack language/ Subtitles You can select the language when you play a multilin- gual disc.
37 Advanced playback Disc status/T o turn off the PBC 1 DISPLA Y ENTER W ith each press of DISPLA Y , the status of the disc will appear on the screen and change as follows. DVD To make status display disappear , press DISPLA Y again. V ideo CD When you playback the CD disc, the status display will appear on the screen and continue displaying.
38 Advanced playback MP3/WMA/JPEG CD inf ormation This unit can play back the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. To produce the MP3/WMA/ JPEG-data, you need a Windows-PC with CD-R/RW drive and a MP3/WMA/JPEG-encoding Software (not supplied).
39 Advanced playback CD ENTER ▲ / ▼ / / STOP PLA Y 0–9 TO P MENU Place a disc on which MP3 or WMA files have been recorded onto the disc tray. A file menu screen will appear on the screen. Press B B B B B / A A A A A or ENTER to select folder. 1 2 3 Press ENTER.
40 Advanced playback The slide show enables you to view pictures (files) one after another automatically . Preparation: Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds” or “15 Seconds” 44 . Select your desired starting file for the slide show in the step 3 as left.
41 Function setup Setting procedure Press SETUP during stop mode. The following on-screen display appears. 1 2 3 To make SETUP screen disappear , press SETUP or RETURN. 5 Customizing the function settings You can change the default settings to customize performance to your preference.
42 Function setup Section Option Menu Subtitle Audio OSD Tv Screen Display Picture Mode JPEG Interval DRC Password Parental Select Files Details To select the language of “Menu”, “Subtitle” and “Audio” if more than one language are available on the disc.
43 Function setup Menu, Subtitle, Audio You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. English, Francais, Espanol: The selected language will be heard or seen. Other: Other language can be selected (see the “Language code list” 47 ) .
44 Function setup JPEG Interval You can continuously play back all JPEG files automati- cally. After the setting below, start playing the disc on which JPEG files have been recorded. Off: Plays back one file at a time. 5 Seconds: Plays back images in the form of a slide show at 5 second intervals.
45 Function setup Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. 1) Press C or D to select “Parental”, then press B or A until the level you require appears. • Level Off: The parental control setting does not function.
46 Function setup Load a DVD disc and press PLAY or OPEN/ CLOSE on the unit 28 . If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the “Reading” screen will change, depending on which disc is played.
47 Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” 43 . Abkhazian 1 1 12 Fiji 1620 Lingala 2224 Singhalese 2919 Afar .
48 Others SYMPTOMS POSSIBLE SOLUTIONS • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. Poor reception on some channels. Horizontal or diagonal bars on screen.
49 Others Playback does not start when the title is selected. • Check the Parental setup. Audio soundtrack and/or subtitle language is not changed when you play back a DVD. • Multilingual language is not recorded on the DVD disc. No subtitle. • Some discs have no subtitles.
50 Others Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results.
51 Others 181 channel freq. synthesized VHF 2-13 UHF 14-69 CATV 125 Channels UHF/VHF: 75 Ω coaxial DVD (12 cm, 8 cm), CD (12 cm, 8 cm) DVD: 4 Hz-22 kHz, CD: 4 Hz-20 kHz T emperature: 5˚C-40˚C (41.
52 T oshiba America Consumer Products, L.L.C. (“T ACP”) makes the following limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
53 Others All warranties implied by state law , including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above.
54 Memo ................................................................................................................................... ...............................................................................................................
55 Others Memo ................................................................................................................................... ........................................................................................................
Printed in Thailand 5S10101A [E] (P52-Back) 2/5/05, 9:45 AM 56.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba MD24F51 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba MD24F51 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba MD24F51 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba MD24F51 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba MD24F51 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba MD24F51 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba MD24F51 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba MD24F51. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba MD24F51 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
