Benutzeranleitung / Produktwartung GN-1060 des Produzenten Toshiba
Zur Seite of 52
MULTIFUNCTIONAL DIGITAL SYSTEMS Operator's Manual for Wireless LAN Module GN-1060.
©2011 - 2012 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this ma nual cannot be reproduced in any form withou t prior written permission of TTEC.
Preface 1 Preface Thank you for purchasing TOSHIBA Multifunctiona l Digital Syst ems or Multifunctional Digita l Co lor Systems. This manual explains the instructions for Wireless LAN Module GN-1060. Read this manual before using you r Multifunctional Digital Systems or Multifunctional Digital Color Systems.
2 Prefac e T rademarks y The official name of Windows XP is Microsoft Windows XP Operating System. y The official name of Windows Vista is Microsoft Windows Vista Operating System. y The official name of Windows 7 i s Microsoft Windows 7 Operating System.
Precautions 3 Precautions Precautions for Use This product is classified as “wireless equipment for st ations of low-power data transmissions systems” under the Wireless T elegraphy Act, and does not require a radio transmission licens e. The law prohibits modification of the interior of this product.
4 Precautions Regulatory Information The TOSHIBA Wireless LAN must be i nstalled and used in st rict accordance with the manu facturer ’s instructions as described in the user documentation that comes w ith the product. This device comp lies w ith the following ra dio frequency and safety standards.
Precautions 5 USA-Federal Communicati ons Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digit al device, pursuant to Part 15 of FCC Rules. These l imits are designed to p rovide reasonable protection against harmful interference in a residential installation.
6 Precautions Regulatory Notice for Channel Use in France The number of channels that can be used for wireless LAN differs from country to country .
CONTENTS 7 CONTENTS Preface ............... ............. ................ ................ ............. ................ ................ ............. ................. 1 Precautions ................. ................ ............. ................
8 CONTENTS.
1. SETTING UP WIRELESS NETWORK This chapter describes about the preparations befor e setting up the wireless setting s of the equipment. Before Setting Up Wireless Network ... ............................................................... ...........
1 SETTING UP WIRELESS NETWORK 10 Before Setting Up Wireless Network Before Setting Up Wireless Network This product is a Wireless LAN Module using the 2.4 GHz spectrum dif fusi on system, and is compatible with IEEE S tandard 802.1 1g and 802.1 1b for wireless LAN.
1.SETTING UP WIRELESS NETWORK Before Setting Up Wireless N etwork 11 1 SETTING UP WIRELESS NETWORK Determine the SSID In the wireless network, the same SSID (Ser vice Set ID) must be assigned in each wireless device. On ly wireless devices that have the same SSID assigned to them can co mmunicate with each other through th e wireless network.
1 SETTING UP WIRELESS NETWORK 12 Before Setting Up Wireless Network WEP The WEP is a data encryption method using the WEP ke y between the Access Point a nd other wireless devices. Compared with WP A/WP A2/802.1X and WP APSK/WP A2PSK, the WEP is less security .
1 SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 13 Setting Up the Infrastructure Mode The wireless settings can be operated from the Control Panel of this equipment. When setting up the equipment for the wireless network in the Infra structure Mode, follow the steps below .
1 SETTING UP WIRELESS NETWORK 14 Setting Up the Infrastructure Mode 5 Press [WIRELESS SETTING]. The WIRELESS SETTING menu is displayed. 6 Press [WIRELESS SETTING]. The WIRELESS SETTING screen is displayed. It may take a time to disp lay the WIRELESS SETTING screen.
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 15 1 SETTING UP WIRELESS NETWORK 8 Press [INFRASTRUCTURE] and press [NEXT]. 9 The SSID SETTINGS screen displayed.
1 SETTING UP WIRELESS NETWORK 16 Setting Up the Infrastructure Mode S pecify SSID When you select the Infrastru cture Mode for the network type, you can specify the SSID by se le cting the available network list or manually entering the SSID. P .
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 17 1 SETTING UP WIRELESS NETWORK 3 Press [NEXT]. 4 The WIRELESS LAN SECURITY SETTINGS screen is displayed. Continue to the procedure fo r specifying the security mode. P .19 “Select security mode” Entering the SSID manually 1 Press [SSID].
1 SETTING UP WIRELESS NETWORK 18 Setting Up the Infrastructure Mode 2 Enter the SSID using the keyboard and digit al keys and press [OK]. The screen returns to the SSID SETTINGS screen. 3 Press [NEXT]. 4 The WIRELESS LAN SECURITY SETTINGS screen is displayed.
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 19 1 SETTING UP WIRELESS NETWORK Select security mode After specifying the SSID, you must select the security mode for your wireless network. The procedure to configure the security mode varies depend ing on the security mode that you select.
1 SETTING UP WIRELESS NETWORK 20 Setting Up the Infrastructure Mode 3 Press [DISABLE] and press [EAP USER NAME]. The letter entry screen is displayed. Press [ENABLE] to use the user name from Common Name in th e User Certificate. 4 Enter the EAP user name using the keyboard and digit al keys and press [OK].
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 21 1 SETTING UP WIRELESS NETWORK 6 Specify the following items and press [NEXT]. y ENCR YPTION BETWEEN AP AND ST A. Select the encryption type tha t is used for the co mmunication between Access Point and this equipment.
1 SETTING UP WIRELESS NETWORK 22 Setting Up the Infrastructure Mode 8 Confirm the settings and press [FINI SH]. If you want to change the settings, press [PREV] to mo ve back to the screen that you want to change and then repeat the operati on. 9 Press [YES], and wait until the setting is reflected.
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 23 1 SETTING UP WIRELESS NETWORK Selecting WP A/WP A2/802.1X se curity mode with PEAP protocol Using the WP A/WP A2/802.1X with the PEAP prot ocol, you must install the CA certif ication file in th e equipment.
1 SETTING UP WIRELESS NETWORK 24 Setting Up the Infrastructure Mode 3 Enter the following items and press [NEXT]. y [EAP USER NAME] Press this to enter the EAP user name that is used for the authentication. In the EAP USER NAME, enter the user name in “User Name@FQDN” format.
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 25 1 SETTING UP WIRELESS NETWORK 5 Specify the following items and press [NEXT]. y TRANSMIT POWER Select the low transmi t power if you want to l imit the area th at the w ireless communication i s enabled.
1 SETTING UP WIRELESS NETWORK 26 Setting Up the Infrastructure Mode Selecting WP APSK/WP A2PSK security mode The WP APSK/WP A2PSK is an auth entication method using the PSK (Pre-Sha red Key) between the Access Point and other wireless devices.
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 27 1 SETTING UP WIRELESS NETWORK 3 Specify the following items and press [NEXT]. y TRANSMIT POWER Select the low transmit power if you wan t to limit the area that the wireless communication is enabled.
1 SETTING UP WIRELESS NETWORK 28 Setting Up the Infrastructure Mode Selecting WEP security mode The WEP is a data encryption method using the WEP ke y between the Access Point a nd other wireless devices. Compared with WP A/WP A2/802.1X and WP APSK/WP A2PSK, the WEP is less security .
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 29 1 SETTING UP WIRELESS NETWORK 3 Specify the following items and press [NEXT]. y TRANSMIT POWER Select the low transmit power if you want to limit the area that the wirele ss communica tion is enabled.
1 SETTING UP WIRELESS NETWORK 30 Setting Up the Infrastructure Mode Selecting no security mode Y ou can also set no secu rity for wireless access. If you do not set no security , anyone knows how the SSID can connect to the wireless netw ork. Therefore, it is recommended to set the security if it is possible.
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 31 1 SETTING UP WIRELESS NETWORK 4 Press [YES], and wait until the setting is reflected.
1 SETTING UP WIRELESS NETWORK 32 Setting up the Ad Hoc Mode Setting up the Ad Ho c Mode The wireless settings can be operated from the Control Panel of this equipment. When setting up the equipment for the wireless network in the Infra structure Mode, follow the steps below .
1.SETTING UP WIRELESS NETWORK Setting up the Ad Hoc Mode 33 1 SETTING UP WIRELESS NETWORK 5 Press [WIRELESS SETTING]. The WIRELESS SETTING menu is displayed. 6 Press [WIRELESS SETTING]. The WIRELESS SETTING screen is displayed. 7 Press [ON] and press [NEXT].
1 SETTING UP WIRELESS NETWORK 34 Setting up the Ad Hoc Mode 8 Press [AD HOC] and press [NEXT]. Y ou can specify the betwee n 1 to 1 1 for the channel. Howe ver , if there is a channel that has already been used for Ad Hoc network, use the same chann el.
1.SETTING UP WIRELESS NETWORK Setting up the Ad Hoc Mode 35 1 SETTING UP WIRELESS NETWORK S pecify SSID When you select the Ad Hoc Mode fo r the network type, you can specify the SSID by entering the SSID manually .
1 SETTING UP WIRELESS NETWORK 36 Setting up the Ad Hoc Mode 4 The WIRELESS LAN SECURITY SETTINGS screen is displayed. Continue to the procedure fo r specifying the security mode.
1.SETTING UP WIRELESS NETWORK Setting up the Ad Hoc Mode 37 1 SETTING UP WIRELESS NETWORK Select security mode After specifying the SSID, you must select the security mode for your wireless network. The procedure to configure the security mode varies depend ing on the security mode that you select.
1 SETTING UP WIRELESS NETWORK 38 Setting up the Ad Hoc Mode 3 Select the transmit power and press [NEXT]. Select the low transmit power if you want to limit the area that the wirele ss communica tion is enabled. If you do not have to limit the area, select [100%].
1.SETTING UP WIRELESS NETWORK Setting up the Ad Hoc Mode 39 1 SETTING UP WIRELESS NETWORK Selecting no security mode Y ou can also set no secu rity for wireless access. If you do not set no security , anyone knows how the SSID can connect to the wireless netw ork.
1 SETTING UP WIRELESS NETWORK 40 Setting up the Ad Hoc Mode 4 Press [YES], and wait until the setting is reflected..
1 SETTING UP WIRELESS NETWORK Disabling Wireless Network 41 Disabling Wireless Network When you enable the wireless network, the on-board NIC (Network Interface Card) will be disabled. If you want to connect the equipment to wired network vi a the on-board NIC, you must disable the wireless netwo rk.
1 SETTING UP WIRELESS NETWORK 42 Disabling Wireless Network 6 Press [WIRELESS SETTING]. The WIRELESS SETTING screen is displayed. 7 Press [OFF] and press [NEXT]. The WIRELESS SETTING CHECK screen is displayed. 8 Press [FINISH]. 9 Press [YES], and wait until the setting is reflected.
2. APPENDIX This chapter describes the specification and glossary of terms. Specification .......... ............................................................... ......................................... ......... 44 T roubleshooting ..............
2 APPENDIX 44 Specification Specification Item Description T ransmission Format IEEE 802.1 1b/g standard Direct Sequence S pread S pectrum (DSSS) Orthogonal Frequency Division Multiplexing (OFDM) Data T ransmission S peed 54, 24, 1 1, 5.5, 2, 1 Mbps (automatic) Access Method CSMA/CA T ransmission Packet IEEE 802.
2 APPENDIX Troubleshooting 45 T roubleshooting When Error Messages are Dis played If any error messages are displayed on the to uch panel, see the following table to troubl eshoot the problems for the Wireless LAN. When Cannot Connect to TOSHIBA MFP When you cannot connect to this equipment, reboot it *.
2 APPENDIX 46 Glossary Glossary Ad hoc mode A type of network for wireless LAN comm unications. In this mode a network is easily built because no access point is required.
INDEX 47 INDEX Numerics 802.1X ........... ............. ................ ................. 11 , 19 , 23 A AD HOC ............ ................ ............. ................ ..........34 Ad Hoc Mode .............. ............. ................ .....
48 INDEX.
GN-1060 OME100082C0.
2-17-2, HIGASHIGOT ANDA, SHINAGA WA-KU, TOKYO, 141-8664, JAP AN MUL TIFUNCTIONAL DIGIT AL S YSTEMS Operator ’s Manual for Wireless LAN Module GN-1060 ©2011 - 2012 TOSHIBA TEC CORPORATION All rights.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba GN-1060 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba GN-1060 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba GN-1060 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba GN-1060 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba GN-1060 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba GN-1060 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba GN-1060 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba GN-1060. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba GN-1060 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
