Benutzeranleitung / Produktwartung e-studio 35 des Produzenten Toshiba
Zur Seite of 165
This Operator's Man ual is printed with ink containing soy oil. 1-1, KAND A NISHIKI-CHO , CHIY OD A-KU , TOKY O , 101-8442, J AP AN © Copyright T OSHIBA TEC CORPORA TION 2000 ALL RIGHTS RESER VE.
WARNING : Changes or modification made to this equipment, not expressly approved by TOSHIBA TEC or parties authorized by TOSHIBA TEC, could void the user's authority to operate the equipment.
EPA E NERGY S TAR ® (MFD) The United States Environmental Protection Agency (EPA) has introduced a voluntary E NERGY S TAR Program to encourage the widespread and voluntary use of energy-efficient technologies that enhance the workplace, improve product performance and prevent pollution.
1 2 3 4 5 6 7 8 9 10 11 12 1 T OSHIB A Q U ALITY IS SECOND T O NONE T -3500 NET 450 gr FOR e-STUDIO45/35 COMPONENTS: Styrene acrylate copolymer,Carbon blac k (1333-86-4), Organic Pigment HANDLE WITH CARE. STORE IN A DR Y PLACE BELOW 35 C(95 F). READ THE OPERA TING INSTRUCTIONS OF THE MA CHINE BEFORE USING.
1 2 3 4 5 6 7 8 9 10 11 12 2 T OSHIB A QU ALITY IS SECOND T O NONE (Cont.) General ISO 9000 and ISO 14000 T oshiba toner plants are ISO 9001 or ISO 9002 and ISO 14001 cer tified. Theref ore quality of craftsmanship and en vironmental fr iendly production are guaranteed from the f actor y .
1 2 3 4 5 6 7 8 9 10 11 12 3 PREF A CE Thank you f or purchasing the T oshiba Digital Copier e-STUDIO45/35. This Operator’ s Manual descr ibes the f ollowing: • how to use the digital copier • h.
1 2 3 4 5 6 7 8 9 10 11 12 4 PREF A CE (Cont.) Features of the e-STUDIO45/35 The e-STUDIO45/35 is a digital copier that can also be used as a printer , scanner/pr inter , and facsimile by installing the related options . (Please check with your authorized T oshiba dealers to purchase these options.
1 2 3 4 5 6 7 8 9 10 11 12 5 T ABLE OF CONTENTS T oshiba quality is second to none ................................................................................................... 1 Preface ..........................................................
1 2 3 4 5 6 7 8 9 10 11 12 6 7. Copying with annotation added ............................................................................................... .. 4-13 8. Page n umbering copying ..........................................................
1 2 3 4 5 6 7 8 9 10 11 12 7 8. Maintenance .................................................................................................................. ................. 8-1 1. Daily inspection ..................................................
1 2 3 4 5 6 7 8 9 10 11 12 8 PRECA UTIONS 1. Installation 1 The e-STUDIO45/35 should be installed b y a qualified ser vice technician. Note: The packing material should be disposed of proper ly . 2 T o obtain the best possible results, this copier should be used in conjunction with a dedicated A C power line at the f ollowing ratings.
1 2 3 4 5 6 7 8 9 10 11 12 9 1 Handle and use the copier gently and carefully . • Do not place an ything on the paper cassettes or the original feeding tra y . • Ne ver allo w the power cab le to be trampled on or pinched between hard objects, otherwise an accident or electrical trouble might occur .
1 2 3 4 5 6 7 8 9 10 11 12 10 This copier has a f orger y prev ention function. Please ensure that your digital copier is not used f or making copies of prohibited items.
1 2 3 4 5 6 7 8 9 10 11 12 1-1 1. BEFORE MAKING COPIES 1. Descr iption of the digital copier and the optional equipment ..... 1-2 • Main components .......................................................................................... 1-2 • Optional equipment .
1 2 3 4 5 6 7 8 9 10 11 12 1-2 BEFORE MAKING COPIES *Or iginal Co v er (optional) Or iginal Glass Automatic Duple xer Bypass Guide Or iginal Scale Control P anel Inner T ray Main P ower Switch F ront Cov er Cassettes 1.
1 2 3 4 5 6 7 8 9 10 11 12 1-3 Optional Equipment y y y y y Key Copy Counter P age 1-15 Records (or accumulates) the number of copies made b y each person or group separately . x x x x x Reversing Automatic Document Feeder P age 2- 6 Automatically f eeds a placed stack of originals one by one to hav e them copied.
1 2 3 4 5 6 7 8 9 10 11 12 1-4 BEFORE MAKING COPIES 1. DESCRIPTION OF THE DIGIT AL COPIER AND THE OPTIONAL EQ UIPMENT (Cont.) Contr ol P anel A utomatic Function Clear Ev en if you do not press the FU.
1 2 3 4 5 6 7 8 9 10 11 12 1-5 Digital keys Use these ke ys to enter the number of copies you want to mak e . Up to 999 copies can be set. They can also be used f or setting time and depar tment codes, and f or sheet inser tion, etc.
1 2 3 4 5 6 7 8 9 10 11 12 1-6 BEFORE MAKING COPIES Currently selected cassette size Remaining paper le v el Message area Confir m set functions ke y T ouch keys area Function setting area T otal cop y quantity Reproduction ratio Message Inde x ke ys 1.
1 2 3 4 5 6 7 8 9 10 11 12 1-7 Confirm set functions key This ke y allows you to confir m the functions that ha ve been set. (The display shown on the right is an e xample.) Clearing the Functions Selected If y ou again press any k ey that is highlighted, the function selected is cleared.
1 2 3 4 5 6 7 8 9 10 11 12 1-8 BEFORE MAKING COPIES PRINTER/ NETWORK COPY FAX 1 1 2 3 4 5 6 7 8 9 0 JOB STATUS START CLEAR/STOP FUNCTION CLEAR INTERRUPT MAIN POWER POWER MONITOR//PAUSE MEMORY RX DATA ERROR ABC DEF JKL GHI MNO TUV PQRS WXYZ 2 C/ FC HELP This function displays the total n umber of copies.
1 2 3 4 5 6 7 8 9 10 11 12 1-9 2. COPY P APER Acceptable P aper T ypes and Siz es/Handling and Storing P aper Plain paper with holes for filing can- not be used. Plain paper with holes for filing can- not be used. Plain paper with holes for filing can- not be used.
1 2 3 4 5 6 7 8 9 10 11 12 1-1 0 BEFORE MAKING COPIES 3. COPY P APER (Cont.) Changing the P aper Size of the Cassette/Setting the Cassette for Special Uses The paper size of the cassettes of the copier can be changed to desired siz es. The cassettes can also be set fo r cov er sheet, sheet inser tion, F AX and special sheets.
1 2 3 4 5 6 7 8 9 10 11 12 1-1 1 Setting the Cassette f or Special Uses Y ou can set the cassette for v arious uses (cover sheet, sheet inser tion, F AX and special sheets). The acceptable paper is plain paper ( 17 ~2 2 l b.) only . P age 1-9 Cassette f or cover sheet P age 4-18 Cassette f or sheet inser tion P age 4-20 Cassette f or F AX.
1 2 3 4 5 6 7 8 9 10 11 12 1-1 2 BEFORE MAKING COPIES 3 Press the cassette key corresponding to that in which the paper has been set, then select any of the CO VER , INSERT , F AX and SPECIAL keys.
1 2 3 4 5 6 7 8 9 10 11 12 1-1 3 2 About 30 seconds later , the copier will become ready for cop ying. • This message appears on the message panel: READ Y 3. TURNING ON THE PO WER SWITCH T urning ON the P ower Switch/A uto Job Star t T urning ON the P ower Switch 1 Open the co ver and turn ON the main power switch.
1 2 3 4 5 6 7 8 9 10 11 12 1-1 4 BEFORE MAKING COPIES 3. TURNING ON THE PO WER SWITCH (Cont.) Contr olling the Use of the Copier with Depar tment Codes With the use of depar tment codes (access codes), you can restrict copier users as well as manage cop y v olumes made by individual g roups or depar tments of your compan y .
1 2 3 4 5 6 7 8 9 10 11 12 1-1 5 Controlling the Use of the Copier Using the Optional K ey Cop y Counters 1 The f ollowing message appears on the basic screen: Set ke y cop y counter 2 Insert your key cop y counter .
1 2 3 4 5 6 7 8 9 10 11 12 1-1 6 BEFORE MAKING COPIES.
1 2 3 4 5 6 7 8 9 10 11 12 2-1 2. HO W T O MAKE COPIES 1. General cop ying procedures ...................................................... 2-2 2. Setting originals ......................................................................... 2-4 3. A uto job star t .
1 2 3 4 5 6 7 8 9 10 11 12 2-2 HO W T O MAKE COPIES 1. GENERAL COPYING PR OCEDURES When originals are set and the ST ART k e y is pressed with any settings unchanged, copies are made in the initial (def ault) settings (*1). Reproduction ratio ........
1 2 3 4 5 6 7 8 9 10 11 12 2-3 3 Press the ST ART key ( c c c c c in the illustration be- low). • Copying begins . PRINTER/ NETWORK COPY FAX 1 1 2 3 4 5 6 7 8 9 0 JOB STATUS START CLEAR/STOP FUNCTIO.
1 2 3 4 5 6 7 8 9 10 11 12 2-4 HO W T O MAKE COPIES 2. SETTING ORIGINALS Originals When Placing an Original on the Glass 1 Raising the original co ver or the rever sing auto- matic document feeder (optional), place the origi- nal face down on the glass.
1 2 3 4 5 6 7 8 9 10 11 12 2-5 Tip When cop ying or iginals with high transparency , such as OHP films and tracing paper , place a blank sheet of paper the size of the original or larger over the original.
1 2 3 4 5 6 7 8 9 10 11 12 2-6 HO W T O MAKE COPIES (1) Badly wr inkled or f olded or iginals; in par ticu- lar , originals whose leading edge is cur led ma y not be correctly fed into the re versing automatic document f eeder.
1 2 3 4 5 6 7 8 9 10 11 12 2-7 Slide Slide In the Single-feed Mode Pa g e 5-3 1 Align the slides to the desired original size . 2 Insert the original face up and straight along the slides; it will then be pulled in automatically . • When the original star ts being pulled in automatically , let go of it.
1 2 3 4 5 6 7 8 9 10 11 12 2-8 HO W T O MAKE COPIES 3. A UT O JOB ST AR T While multi-cop ying is in progress, y ou can reser ve the ne xt copy . 1 Place the original(s). P age 2-4 Select cop y modes as required. 2 Press the ST ART ke y . • Up to 5 jobs including the current printing job can be stored in the memory .
1 2 3 4 5 6 7 8 9 10 11 12 2-9 PRINTER/ NETWORK COPY FAX 1 1 2 3 4 5 6 7 8 9 0 JOB STATUS START CLEAR/STOP FUNCTION CLEAR INTERRUPT MAIN POWER POWER MONITOR//PAUSE MEMORY RX DATA ERROR ABC DEF JKL GHI MNO TUV PQRS WXYZ 2 C/ FC HELP 4.
1 2 3 4 5 6 7 8 9 10 11 12 2-1 0 HO W T O MAKE COPIES 5. ST OPPING THE COPY OPERA TION If you w ant to stop the operation dur ing the scanning of the original or multicop ying, use the CLEAR/ ST OP key . Stopping the Scanning of the Original 1 Press the CLEAR/ST OP key during the scan- ning.
1 2 3 4 5 6 7 8 9 10 11 12 2-1 1 3 Press the Delete key . 4 The data will be deleted and the multicop ying op- eration will stop. • If there are other data w aiting to be printed, those will star t being output.
1 2 3 4 5 6 7 8 9 10 11 12 2-1 2 HO W T O MAKE COPIES 6 . DELETING OR CHANGING ORDER OF PENDING JOBS If data are waiting to be printed, you can delete those data which ha ve become unneeded, or change the printing order . Deleting the Data In the f ollowing procedure, y ou can delete the data of a multi- cop ying operation as well.
1 2 3 4 5 6 7 8 9 10 11 12 2-1 3 Changing the Printing Or der 1 Press the JOB ST A TUS key on the contr ol panel, then the JOB LIST key on the touc h panel.
1 2 3 4 5 6 7 8 9 10 11 12 2-1 4 HO W T O MAKE COPIES.
1 2 3 4 5 6 7 8 9 10 11 12 3-1 3. SETTING OF B ASIC COPY MODES 1. P aper selection .......................................................................... 3-2 • A utomatic paper selection (APS) ....................................................
1 2 3 4 5 6 7 8 9 10 11 12 3-2 SETTING OF BASIC COPY MODES 1. P APER SELECTION A utomatic P aper Selection (APS) When you place regular-siz ed originals on the glass or in the reversing automatic docu.
1 2 3 4 5 6 7 8 9 10 11 12 3-3 Manual P aper Selection It may not be possib le for the de vice to perf orm Automatic P aper Selection with highly transparent origi- nals such as OHP films and tracing paper , wholly dark originals or or iginals with dark borders, or irregu- lar sized originals such as newspapers and magazines .
1 2 3 4 5 6 7 8 9 10 11 12 3-4 SETTING OF BASIC COPY MODES 1 Set the original(s). Page 2-4 2 Set sheets of paper on the bypass guide and align the slides with the size of the paper . • This message appears: Ready f or bypass cop ying • The paper should be placed with the side to be copied f ac- ing do wn.
1 2 3 4 5 6 7 8 9 10 11 12 3-5 Note Remo ve copies made on special sheets of paper or OHP films one by one. They should not be allow ed to stac k up in the exit (inner) tr ay or finisher (optional). 3 Press the NON ST AND ARD key . 4 Ke y in each dimension (length, width) .
1 2 3 4 5 6 7 8 9 10 11 12 3-6 SETTING OF BASIC COPY MODES 2. REDUCTION AND ENLARGEMENT COPYING There are the f ollowing three wa ys of making copies in the reduction and enlargement mode: • Using A.
1 2 3 4 5 6 7 8 9 10 11 12 3-7 Specifying both Original Size and Copy Size 1 Set the original(s). Page 2-4 2 Press the ZOOM··· key on the basic screen. 3 Press the ORIGINAL SIZE key of the same size as the original, then press the desired COPY SIZE key .
1 2 3 4 5 6 7 8 9 10 11 12 3-8 SETTING OF BASIC COPY MODES 2. REDUCTION AND ENLARGEMENT COPYING (Cont.) U s i n g t h e Reduction /Enlargement Zoom K e ys or One-touch Zoom K eys 1 Set the original(s). Pa ge 2-4 2 Press the cassette icon representing the desired copy paper size, then press ZOOM···· key .
1 2 3 4 5 6 7 8 9 10 11 12 3-9 3. SELECTING TYPES OF COPYING (1-SIDED , 2-SIDED , BOOK-TYPE) This function allows y ou to set the type of or iginals (1-sided, 2-sided or book-type) and the desired type of copying (1-sided or 2-sided).
1 2 3 4 5 6 7 8 9 10 11 12 3-1 0 SETTING OF BASIC COPY MODES • If the “1-SIDED 1-SIDED” mode is not selected, press the ke y (shaded) in the figure on the right, then press the 1 n 1 ke y on the next screen. Select other cop y modes as required.
1 2 3 4 5 6 7 8 9 10 11 12 3-1 1 2 Press the 1 n n n n n 2 key . 3 Place the originals. Page 2-4 • Changing direction of cop y images P age 4-24 Select other copy modes as required. 4 Press the ST ART ke y . When Placing an Original on the Glass 5 Place the next original (2nd side) and press the ST ART ke y .
1 2 3 4 5 6 7 8 9 10 11 12 3-1 2 SETTING OF BASIC COPY MODES 2 On the basic screen, press the key (shaded) in the figure on the right. 3 Press the 2 n n n n n 2 key . Select other cop y modes as required. 4 Press the ST ART ke y . c c c c c 2-Sided Originals 2-Sided Copies The optional re versing automatic document f eeder must be in- stalled.
1 2 3 4 5 6 7 8 9 10 11 12 3-1 3 3 Press the 2 n n n n n 1 key . Select other cop y modes as required. 4 Press the ST ART ke y . 2 Press the BOOK n n n n n 2 key . 3 Select the book copying type. • Press the RIGHT n RIGHT k ey if cop ying should star t at a right-hand page and end at a r ight-hand page.
1 2 3 4 5 6 7 8 9 10 11 12 3-1 4 SETTING OF BASIC COPY MODES 6 Place the first pa g e(s) to be copied on the glass, and press the ST ART ke y . • If you do not cop y your originals from the first page, the copies will not be arranged in the same order as the origi- nal.
1 2 3 4 5 6 7 8 9 10 11 12 3-1 5 4. COPY DENSITY ADJUSTMENT There are two types of image density adjustments: automatic mode (def ault setting) and manual mode. In the automatic mode, the sensors automatically detect the density of each original and select the optimum image density .
1 2 3 4 5 6 7 8 9 10 11 12 3-1 6 SETTING OF BASIC COPY MODES Manual Copy Density Mode 1 Set the original(s). P age 2-4 2 Press the A UT O on the basic screen. 3 Press either or key to adjust the cop y density to the desired level. • Each time you press the or k ey , your copies will be- come lighter or darker , respectively .
1 2 3 4 5 6 7 8 9 10 11 12 3-1 7 5. SELECTING IMA GE QU ALITY TYPES OF ORIGINALS According to the type of your originals, y ou can choose among the three image types: Photo , T ext or T e xt/ Photo (def ault setting).
1 2 3 4 5 6 7 8 9 10 11 12 3-1 8 SETTING OF BASIC COPY MODES.
1 2 3 4 5 6 7 8 9 10 11 12 4-1 4. USING THE EDITING FUNCTIONS 1. Image shift copying .................................................................. 4-2 2. Edge erase cop ying .................................................................. 4-4 3.
1 2 3 4 5 6 7 8 9 10 11 12 4-2 USING THE EDITING FUNCTIONS 1. IMA GE SHIFT COPYING 1 Set the original(s). Page 2-4 2 Press the EDIT ke y to enter the editing menu. Then, press the IMA GE SHIFT key . • If the k ey f or the desired function is not shown, press the Pre ke y to switch the screen.
1 2 3 4 5 6 7 8 9 10 11 12 4-3 4 Adjust the width of the marg in, then press the SET key . • The def ault width of the margin is 14 mm. • T o adjust the width, press the 2mm or 30mm key to select the desired number , then press the SET ke y . Select other cop y modes as required.
1 2 3 4 5 6 7 8 9 10 11 12 4-4 USING THE EDITING FUNCTIONS 2. EDGE ERASE COPYING If your original has a dirty or tor n edge, it ma y be reproduced as a black stain on the cop y . In that case, use Edge Erase Cop ying. A white border is created along the edges of the copy , eliminating those blac k stains.
1 2 3 4 5 6 7 8 9 10 11 12 4-5 3. DU AL-P A GE COPYING 1 Press the EDIT ke y to enter the editing menu. Then, press the DU AL P A GE key . • If the k ey f or the desired function is not shown, press the Pre ke y to s witch the screen.
1 2 3 4 5 6 7 8 9 10 11 12 4-6 USING THE EDITING FUNCTIONS 4. X-Y ZOOM COPYING 1 Set the original(s). Page 2-4 2 Press the EDIT ke y to enter the editing menu. Then, press the XY ZOOM key . • If the k ey f or the desired function is not shown, press the Pre ke y to switch between the screens.
1 2 3 4 5 6 7 8 9 10 11 12 4-7 5. IMA GE EDITING T rimming/Masking T r imming cop y Masking cop y Original Y ou can select areas on an original and copy it with the areas trimmed (only the inside of the areas copied) or masked (only the outside of the areas copied).
1 2 3 4 5 6 7 8 9 10 11 12 4-8 USING THE EDITING FUNCTIONS 5. IMA GE EDITING (Cont.) T rimming/Masking (Cont.) 4 Press the TRIM (or MASK ) key . 5 Enter the distance values f or the specified area. • K ey in the v alue for X1 with the digital ke ys and press the upper SET ke y .
1 2 3 4 5 6 7 8 9 10 11 12 4-9 1 Set the original(s). Pa ge 2-4 2 Press the EDIT ke y to enter the editing menu. Then, press the EDITING key . • If the k ey f or the desired function is not shown, press the Pre ke y to s witch the screen. Copies are made with images completely re versed in ter ms of the right and the left.
1 2 3 4 5 6 7 8 9 10 11 12 4-1 0 USING THE EDITING FUNCTIONS 5. IMA GE EDITING (Cont.) Negative/P ositive Re versal 1 Set the original(s). Pa ge 2-4 2 Press the EDIT ke y to enter the editing menu. Then, press the EDITING key . • If the k ey f or the desired function is not shown, press the Pre ke y to s witch the screen.
1 2 3 4 5 6 7 8 9 10 11 12 4-1 1 6. 2 IN 1 / 4 IN 1 COPYING This f eature allows multiple originals to be reduced and copied onto a single sheet of paper . There are two modes: 2 IN 1 cop ying, where two or iginals are reduced and copied onto a single sheet, and 4 IN 1 cop ying, where four originals are reduced and copied onto a single sheet.
1 2 3 4 5 6 7 8 9 10 11 12 4-1 2 USING THE EDITING FUNCTIONS 6. 2 IN 1 / 4 IN 1 COPYING (Cont.) 3 Select the type of image combination. • Press the 2IN1 (or 4IN1 , 2IN1 DUPLEX or 4IN1 DUPLEX ) ke y . 4 Select the type of the original. • Press 1 SIDE (or 2 SIDE ) k ey .
1 2 3 4 5 6 7 8 9 10 11 12 4-1 3 7. COPYING WITH ANNO T A TION ADDED 1 Set the original(s). Pa ge 2-4 2 Press the EDIT ke y to enter the editing menu. Then, press the ANNO T A TION key . • If the k ey f or the desired function is not shown, press the Ne xt key to s witch the screen.
1 2 3 4 5 6 7 8 9 10 11 12 4-1 4 USING THE EDITING FUNCTIONS 8. P A GE NUMBERING COPYING This f eature allows page numbers to be added at a specified position to copies. 1 Set the original(s). Pa ge 2-4 2 Press the EDIT key to enter the editing menu. Then, press the P A GE NUMBER key .
1 2 3 4 5 6 7 8 9 10 11 12 4-1 5 When Placing an Original on the Glass 6 When the first page has been scanned, set the next page and press the ST ART key . • Y ou can also press the YES key bef ore pressing the ST ART k ey to perf orm the same operation.
1 2 3 4 5 6 7 8 9 10 11 12 4-1 6 USING THE EDITING FUNCTIONS 9. MA GAZINE SOR T COPYING (FR OM EDITING MENU) Select other cop y modes as required. 4 Press the ST ART ke y . 1 Set the original(s). Pa ge 2-4 2 Press the EDIT ke y to enter the editing menu.
1 2 3 4 5 6 7 8 9 10 11 12 4-1 7 When Placing an Original on the Glass 5 When the first page has been scanned, set the next page and press the ST ART key . • Y ou can also press the YES key bef ore pressing the ST ART k ey to perf orm the same operation.
1 2 3 4 5 6 7 8 9 10 11 12 4-1 8 USING THE EDITING FUNCTIONS 10. CO VER SHEET COPYING 2 Press the EDIT key to enter the editing men u. Then, press the CO VER SHEET ke y . • If the k ey f or the desired function is not shown, press the Next k ey to s witch the screen.
1 2 3 4 5 6 7 8 9 10 11 12 4-1 9 3 Press the desired Cover Sheet ke y: T o add a blank top co ver .................................. TOP BLANK T o add a copied top cov er .............................. TOP COPIED T o add blank top and bac k cov ers ..
1 2 3 4 5 6 7 8 9 10 11 12 4-2 0 USING THE EDITING FUNCTIONS 11. SHEET INSERTION COPYING Special sheets of paper (such as colored paper) are inser ted into a set of copies at specified pages.
1 2 3 4 5 6 7 8 9 10 11 12 4-2 1 4 Press the desired Insertion mode key . T o inser t blank sheets bef ore specified pages ........ BLANK T o inser t copied sheets at specified pages ........... COPIED 5 Using the digital keys, key in the desired page num- ber f or inser tion and press the NEXT key .
1 2 3 4 5 6 7 8 9 10 11 12 4-2 2 USING THE EDITING FUNCTIONS 12. DOCUMENT ST ORA GE This feature allo ws images of the or iginals to be stored on the hard disk of the copier , and copies can be made from the hard disk later . This copying method consists of the f ollowing two modes: y MEMORIZE mode .
1 2 3 4 5 6 7 8 9 10 11 12 4-2 3 5 Press the ST ART ke y . • The memorization process star ts automatically . Tips • T o change the file name, select the ID y ou want to change in the list on the .
1 2 3 4 5 6 7 8 9 10 11 12 4-2 4 USING THE EDITING FUNCTIONS 13. DIRECTION OF COPY IMA GES (RO T A TION) This mode allows y ou to specify the direction of images being scanned.
1 2 3 4 5 6 7 8 9 10 11 12 4-2 5 When Using the Rever sing A utomatic Document Feeder (optional) 1 Set the original(s). Page 2-4 2 Press the EDIT key to enter the editing men u. Then, press the IMA GE DIRECTION ke y . • If the k ey f or the desired function is not shown, press the Ne xt key to s witch between the screen.
1 2 3 4 5 6 7 8 9 10 11 12 4-2 6 USING THE EDITING FUNCTIONS 5 When the final original has finished being scanned, press the FINISHED key . 13. DIRECTION OF COPY IMA GES (R O T A TION) (Cont,).
1 2 3 4 5 6 7 8 9 10 11 12 5-1 5. USING THE SPECIAL FUNCTIONS 1. Continuous or iginal f eeding/Single original feeding ................. 5-2 2. Copying mix ed-sized originals .................................................. 5-4 3 . Job memor y cop ying .
1 2 3 4 5 6 7 8 9 10 11 12 5-2 USING THE SPECIAL FUNCTIONS 1. CONTINUOUS ORIGINAL FEEDING/SINGLE ORIGINAL FEEDING When using the rev ersing automatic document feeder (optional), y ou can select the co.
1 2 3 4 5 6 7 8 9 10 11 12 5-3 Single-feed Mode 1 Press the PR OGRAM ke y to enter the program menu, and press the ADF ke y . • If the k ey f or the desired function is not shown, press the Pre ke y to s witch the screen. 2 Press the SADF key . Select other cop y modes as required.
1 2 3 4 5 6 7 8 9 10 11 12 5-4 USING THE SPECIAL FUNCTIONS 2. COPYING MIXED-SIZED ORIGINALS 1 Set the original(s). Pa ge 2-6 • LD and L T sized originals or LG and L T originals can be mix ed. 2 Press the PR OGRAM key to enter the pr ogram menu. Then, press the MIXED ORIGINAL SIZES key .
1 2 3 4 5 6 7 8 9 10 11 12 5-5 3. JOB MEMOR Y COPYING Storing a Combination of Copy Modes 1 Select the desired copy modes. Example: Reproduction ratio ......................................................... 7 1% Copy quantity .......................
1 2 3 4 5 6 7 8 9 10 11 12 5-6 USING THE SPECIAL FUNCTIONS 3. JOB MEMOR Y COPYING (Cont.) Recalling and Cop ying a Stored Combination of Cop y Modes 1 Set the original(s). Pa ge 2-4 2 Press the PR OGRAM key to enter the pr ogram menu. Then, press the JOB MEMOR Y key .
1 2 3 4 5 6 7 8 9 10 11 12 5-7 Confirming Stored Copy Modes T o confir m the cop y modes stored in the MEMOR Y ke y , perf or m steps 2 to 4 on page 5-6, then press the SETTINGS key .
1 2 3 4 5 6 7 8 9 10 11 12 5-8 USING THE SPECIAL FUNCTIONS 4. COPYING ON SPECIAL TYPES OF P APER 1 Set the original(s). P age 2-4 2 Place the paper on the sheet b ypass and set the paper size . • Bypass cop ying Page 3-4 3 Press the PR OGRAM ke y to enter the program menu.
1 2 3 4 5 6 7 8 9 10 11 12 5-9 Outputting T ransparency (OHP) Films on Inner T r a y T o output the transparency (OHP) films on the inner tra y , install the guide f or it on the inner tray . * If the optional finisher is installed, this operaion is not required since the films e xit on the finisher tray .
1 2 3 4 5 6 7 8 9 10 11 12 5-1 0 USING THE SPECIAL FUNCTIONS 5. WEEKL Y TIMER Setting the W eekly Timer 1 Press the PR OGRAM ke y to enter the program menu. Then, press the WEEKL Y TIMER key . • If the k ey f or the desired function is not shown, press the Pre ke y to switch between the screens .
1 2 3 4 5 6 7 8 9 10 11 12 5-1 1 Y ou can cancel the operation of the weekly timer so that the copier can be turned ON and OFF nor mally by the pow er s witch. Canceling the Use of the W eekly Timer 1 Press the PR OGRAM key to enter the pr ogram menu.
1 2 3 4 5 6 7 8 9 10 11 12 5-1 2 USING THE SPECIAL FUNCTIONS 6. SETTING THE O THER P APER SIZES (O THER KEY) Y ou can easily make copies using non-American sizes such as European sizes (A5~A3). 4 Press the COPY SIZE key of the paper correspond- ing to the size that has been set in the bypass guide.
1 2 3 4 5 6 7 8 9 10 11 12 5-1 3 7. SETTING THE D A TE AND TIME The clock b uilt in to the copier can be set to work by entering the date, day of the w eek and time using the digital ke ys. Also , y ou can easily change the clock to and from the da ylight saving time system at the touch of a ke y .
1 2 3 4 5 6 7 8 9 10 11 12 5-1 4 USING THE SPECIAL FUNCTIONS 8. SETTING A UT OMA TIC ENERGY SA VING MODE Setting the Automatic Ener gy Saving Mode 1 Press the PR OGRAM key to enter the pr ogram menu. Then, press the ENERGY SA VE key . • If the ke y for the desired function is not shown, press the Next k ey to s witch the screen.
1 2 3 4 5 6 7 8 9 10 11 12 5-1 5 2 On the displa y , select the period of time (in minutes) allo wed before the A utomatic Shutoff mode is acti- v ated.
1 2 3 4 5 6 7 8 9 10 11 12 5-1 6 USING THE SPECIAL FUNCTIONS 10. SWITCHING BETWEEN LANGU A GES The language used on the touch panel can be changed to diff erent language. 1 Press the PR OGRAM ke y to enter the program menu. Then, press the CHANGE LANGU A GES key .
1 2 3 4 5 6 7 8 9 10 11 12 5-1 7 11. DEP AR TMENT CODES Y ou can administer the copy quantity of each group b y setting a depar tment code for each purpose (cop ying, pr inter and F AX). Up to 50 codes can be set. * Y ou need a master code to be input when you use this function f or the first time.
1 2 3 4 5 6 7 8 9 10 11 12 5-1 8 USING THE SPECIAL FUNCTIONS 11. DEP AR TMENT CODES (Cont.) Clearing All Counters This function clears all counters to “000000”. * The total counter ( P age 1-8) cannot be cleared. 1 Press the RESET ALL COUNTERS key in the de- partment code menu.
1 2 3 4 5 6 7 8 9 10 11 12 5-1 9 3 Press the SET key to register a master code. • If the master code has already been registered, the screen on step 6 will be display ed.
1 2 3 4 5 6 7 8 9 10 11 12 5-2 0 USING THE SPECIAL FUNCTIONS 3 The confirmation screen f or depar tment code change is displa yed. Press the SET key . 2 Select the department code number you want to change, and press the CHANGE key .
1 2 3 4 5 6 7 8 9 10 11 12 5-2 1 4 Input the department name and press the SET key . • Enter ing letters P age 5-24 5 Using the digital ke ys, enter the current department code f or CURRENT CODE , and the code y ou want to register both f or NEW CODE and f or RETYPE NEW CODE , and press the lowe r SET key .
1 2 3 4 5 6 7 8 9 10 11 12 5-2 2 USING THE SPECIAL FUNCTIONS Clearing a Specific Department Counter 1 Press the SET DEP ARTMENT CODES ke y in the department code menu. 2 Press the ENABLE key , then the SET key . 3 Select the department number you want to delete, and press the DELETE key .
1 2 3 4 5 6 7 8 9 10 11 12 5-2 3 3 Select the department number where you want to c lear the counter , and press the RESET COUNTERS key . 4 Press the YES key . 2 Press the DISABLE key . • If y ou hav e pressed this ke y , you ha ve to register the master code again.
1 2 3 4 5 6 7 8 9 10 11 12 5-2 4 USING THE SPECIAL FUNCTIONS 12. ENTERING LETTERS The f ollowing screen is provided f or enter ing letters. * F or entering numbers, use the digital k e ys on the control panel. The follo wing ke ys are used for entering letters.
1 2 3 4 5 6 7 8 9 10 11 12 5-2 5 4 Press the SET ke y to fix the entered letters. 3 Press the S , H , I , B and A keys. Correcting Entered Letters Example : Correct “T oshiba” to “T OSHIBA”. 1 Press the B Space key to delete “oshiba”. 2 Press the CapsLock ke y to enter the capital letters.
1 2 3 4 5 6 7 8 9 10 11 12 5-2 6 USING THE SPECIAL FUNCTIONS 4 Press the ke y to move the cur sor to (under) “A”. 3 Press the O , S , H , I , V and A keys. 5 Press the B Space key to delete “V”. 6 Press the B key to enter “B”, then the SET ke y to fix the entered letters.
1 2 3 4 5 6 7 8 9 10 11 12 6-1 6. SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 1. Finishing modes and finishers (optional) ................................... 6-2 2. Sor t/group cop ying ....................................................
1 2 3 4 5 6 7 8 9 10 11 12 6-2 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 1. FINISHING MODES AND FINISHERS (OPTIONAL) There are 3 types of optional finishers (MJ-1011, MJ-1012 and MJ-1013). Functions availab le differ depending on the type of the finisher installed.
1 2 3 4 5 6 7 8 9 10 11 12 6-3 2. SOR T/GROUP COPYING The def ault setting for the finishers is Non-sor t mode, ho wev er , you can produce sor ted copies or grouped copies as required.
1 2 3 4 5 6 7 8 9 10 11 12 6-4 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) When Placing an Original on the Glass 5 Place the next original (or 2nd side) and press the ST ART ke y . • Y ou can press the YES ke y and then the ST ART k ey to do the same operation.
1 2 3 4 5 6 7 8 9 10 11 12 6-5 3. ST APLE MODE 1 Set the originals. Pa ge 2-4 When the optional finisher is installed, you can use the function that automatically staples at one of the f ollowing three positions. * Only SINGLE-1 is av ailable f or the hanging type finisher (MJ-1011) .
1 2 3 4 5 6 7 8 9 10 11 12 6-6 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 3 Press the SINGLE-1 (or DOUBLE or SINGLE-2 ) key . Select other copy modes as required.
1 2 3 4 5 6 7 8 9 10 11 12 6-7 1 Set the originals. Page 2-4 2 Press the key on the basic screen as sho wn on the right (shaded). 3 Press the AL TERNA TION key . 4 Select L T size of paper . • When y ou select L T , mak e sure that an L T -R cassette is also installed.
1 2 3 4 5 6 7 8 9 10 11 12 6-8 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 5. HOLE PUNCHING MODE 1 Set the originals. Page 2-4 2 Press the key on the basic screen as sho wn on the right (shaded). With the optional punching unit attached to the optional finisher (MJ-1012 or MJ-1013 only), you can hav e your copies punched with holes.
1 2 3 4 5 6 7 8 9 10 11 12 6-9 6. MA GAZINE SOR T & SADDLE STITCHING MODE When the Magazine Sor t mode is selected, copies are made so that they can be bound lik e magazines.
1 2 3 4 5 6 7 8 9 10 11 12 6-1 0 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 3 Press the MA GAZINE SORT (or MA GAZINE SORT & SADDLE STITCH or SADDLE STITCH ) key . Select other copy modes as required. 4 Press the ST AR T key . 6. MA GAZINE SOR T & SADDLE STITCHING MODE (Cont.
1 2 3 4 5 6 7 8 9 10 11 12 7-1 7. WHEN GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 1. Description of the flashing graphic symbols ............................. 7-2 2. Add paper symbol ....................................................................
1 2 3 4 5 6 7 8 9 10 11 12 7-2 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 1. DESCRIPTION OF THE FLASHING GRAPHIC SYMBOLS The graphic displa y on the touch panel shows the sta- tus of the copier . When one of the gr aphic symbols flashes, take the appropriate action ref erring to page shown.
1 2 3 4 5 6 7 8 9 10 11 12 7-3 2. ADD P APER SYMBOL Adding P aper to the Cassettes When the paper supply in the selected cassette or the large-capacity feeder (optional) runs out, the cassette or large-capacity f eeder shown on the display flashes, and the f ollowing message appears: Add paper Add paper as follo ws.
1 2 3 4 5 6 7 8 9 10 11 12 7-4 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL B A 2. ADD P APER SYMBOL (Cont.) Adding P aper to the Lar ge-Capacity Feeder (optional) 1 Pulling up the grip, draw out the lar ge-capacity feeder carefull y until it comes to a stop.
1 2 3 4 5 6 7 8 9 10 11 12 7-5 T -3500 NET 450 gr FOR e-STUDIO45/35 COMPONENTS: Styrene acrylate copolymer,Carbon blac k (1333-86-4), Organic Pigment HANDLE WITH CARE. STORE IN A DR Y PLACE BELOW 35 C(95 F). READ THE OPERA TING INSTRUCTIONS OF THE MACHINE BEFORE USING.
1 2 3 4 5 6 7 8 9 10 11 12 7-6 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL Removing the T oner Car tridge 4 Pushing on the c l a w, lower the cartridg e holder to- war d you.
1 2 3 4 5 6 7 8 9 10 11 12 7-7 8 Pull out the seal in the direction of the arr ow as shown on the right. Installing a New T oner Car tridge 7 Shake the new toner cartridge well to loosen the con- tents. 5 Rotate the car tridge so that the arro w on its side appears in the position sho wn on the right.
1 2 3 4 5 6 7 8 9 10 11 12 7-8 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL Installing a New T oner Bag 11 Install the new toner ba g by rever sing the procedure used f or removing one. • Ref er to the procedure in steps 2 and 3 on page 7-6. 3. REPLA CE T ONER CARTRIDGE SYMBOL (Cont.
1 2 3 4 5 6 7 8 9 10 11 12 7-9 Type of originals A. B. C. Ａ Ａ Ａ Ａ 5,000 10,000 Ａ Ａ Ａ Ａ Ａ Ａ Ａ Ａ Ｃ Ｃ Ｃ Ｃ 15,000 Ｂ Ｂ Ｂ Ｂ 20,000 Additional Explanation The lif e of the toner car tridge (number of copies) varies depending on the f ollowing conditions.
1 2 3 4 5 6 7 8 9 10 11 12 7-1 0 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 4. CLEAR P APER SYMBOL Paper Misf eed in the Rever sing A utomatic Document Feeder (optional) • Remov e any misf ed originals. 2 Rotate the blue knob on y our side in the direction of the arro w and remove an y misfed originals.
1 2 3 4 5 6 7 8 9 10 11 12 7-1 1 6 Remove an y misfed originals. 3 Lift the blue handle. 4 Rotate the blue knob on y our side to remove an y misfed originals.
1 2 3 4 5 6 7 8 9 10 11 12 7-1 2 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 4. CLEAR P APER SYMBOL (Cont.) A 8 Remove an y misfed originals. P aper Misfeed in the Cassette Feeding Area 1 Open the cover A A A A A . 7 Move the blue knob to ward the fr ont.
1 2 3 4 5 6 7 8 9 10 11 12 7-1 3 B P aper Misfeed in the Large-Capacity Feeder (optional) 1 Open the co ver B B B B B . 2 Remove an y misfed paper . P aper Misfeed on the Bypass Feed Unit 1 Pull out misfed paper on the b ypass guide . • Reset the sheets of paper on the b ypass guide.
1 2 3 4 5 6 7 8 9 10 11 12 7-1 4 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL P aper Misfeed in the Jam Releasing Unit 1 Making sure that the bypass guide and the automatic duplexer are opened, pull out the two blue knobs and push down the tw o fuser pressure release le- ver s.
1 2 3 4 5 6 7 8 9 10 11 12 7-1 5 3 Rotate the blue knob indicated with an arr ow to ward the inside and remove an y misfed paper . • After ha ving remov ed the paper, be sure to close the both sides of the jam releasing unit cov er fir mly .
1 2 3 4 5 6 7 8 9 10 11 12 7-1 6 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 2 Remove an y misfed paper inside the rela y unit. P aper Misfeeds in the Rela y Unit 1 Holding the co ver handle of the relay unit, open it. • If paper is misf ed at the inner par t of the relay unit, remo ve it pushing down the blue le ver .
1 2 3 4 5 6 7 8 9 10 11 12 7-1 7 3 Rotate the blue knob to locate the arr ow within the area on the label. • Under this condition, the punchers are up , allowing the pa- per shown in the figure to be remov ed. P aper Misfeed in the Finisher (optional) When using the console type: 1 Raise the hole punching unit (optional).
1 2 3 4 5 6 7 8 9 10 11 12 7-1 8 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL When using the Hanging type: 1 By pulling the lever , move the finisher carefull y awa y from the copier . 4 Remove an y misfed paper in the paper e xit area. 3 Lifting knob y y y y y or knobs y y y y y and x x x x x , remove any misf ed paper .
1 2 3 4 5 6 7 8 9 10 11 12 7-1 9 2 Lifting the blue le ver , pull out an y misfed paper . 3 Remove an y misfed paper in the paper e xit area. P aper Misf eed in the Saddle Stitching Unit (optional) 1 Pressing the b utton shown with the arro w , move the finisher aw a y from the copier .
1 2 3 4 5 6 7 8 9 10 11 12 7-2 0 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 3 Open the lower co ver of the finisher . 4 T urn the right-hand knob counterc lockwise. 5 Pushing the left-hand knob, turn it c lockwise. 6 Remove an y paper misfed on the exit side of the saddle stitcher .
1 2 3 4 5 6 7 8 9 10 11 12 7-2 1 5. ADDING ST APLES When the staple car tridge r uns out of staples, the f ollowing message appears: Set staple car tridge Add staples to the car tridge according to the procedure below . Console-T ype Finisher 1 Open the front finisher co ver .
1 2 3 4 5 6 7 8 9 10 11 12 7-2 2 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 5. ADDING ST APLES (Cont.) 4 Push in a new staple case into the staple cartridge completely inside until a c lick is hear d. • Do not remov e the seal holding the staples before the staple case is set in the car tridge.
1 2 3 4 5 6 7 8 9 10 11 12 7-2 3 Saddle Stitching Unit 1 Open the lower co ver of the finisher . 2 Slide out the sad dle stitching unit carefully to ward the front. 3 Pull out the grip of the saddle stitch holder to ward y ou and turn it 90 degrees clockwise.
1 2 3 4 5 6 7 8 9 10 11 12 7-2 4 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL Note If test stapling f ails to be performed and the follo wing mes- sage remains displa yed, repeat the abov e procedure from steps 1 to 7. Set staple car tridge Hanging-T ype Finisher 1 By pulling the lever , move the finisher a way care- fully fr om the copier .
1 2 3 4 5 6 7 8 9 10 11 12 7-2 5 6. REMO VING J AMMED ST APLES When copies hav e not been stapled in the staple mode, check if the f ollowing message is shown on the displa y : Examine stapler If the message is shown, staples ha ve been jammed. Remove them as described below .
1 2 3 4 5 6 7 8 9 10 11 12 7-2 6 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 6. REMO VING JAMMED ST APLES (Cont.) 1 2 2 5 Slide the staple cartridg e bac k into the stapler • Push the staple car tridge in until it is caught by the cla w and fix ed with a click sound.
1 2 3 4 5 6 7 8 9 10 11 12 7-2 7 5 Return the staple case to its original position. 6 Return the saddle stitch holder and the sad dle stitch- ing unit to their original positions. 7 Close the lower finisher co ver . Hanging-T ype Finisher 1 P erform steps 1 and 2 of the pr ocedure f or “5.
1 2 3 4 5 6 7 8 9 10 11 12 7-2 8 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 7. CLEAR ING A CCUMULA TED PUNCHED P APER BITS When paper bits punched from copies ha ve accum ulated to a cer tain lev el, the f ollowing message appears. Please Dispose of Hole Punch Dust Dispose of the paper bits as described below .
1 2 3 4 5 6 7 8 9 10 11 12 7-2 9 8. CALL SER VICE SYMBOL When the CALL SER VICE symbol flashes, the follo wing message appears and copying is no longer possible .
1 2 3 4 5 6 7 8 9 10 11 12 7-3 0 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 9. PERIODIC MAINTENANCE MESSA GE When the f ollowing message has appeared on the displa y panel: Time for periodic maintenance This indicates that assistance from a qualified service technician is required.
1 2 3 4 5 6 7 8 9 10 11 12 8-1 8. MAINTENANCE 1. Daily inspection ......................................................................... 8-2 2. Simple troub leshooting .
1 2 3 4 5 6 7 8 9 10 11 12 8-2 MAINTENANCE 1. D AIL Y INSPECTION Items for Dail y Check Main power switc h ON/OFF status • W e recommend tur ning the main power s witch ON at star tup e veryda y so that copies can be made whenev er you w ant. Also , be sure to tur n the main pow er s witch OFF when you leav e the office.
1 2 3 4 5 6 7 8 9 10 11 12 8-3 Cleaning the Charger If the inside of the charger and the wire become dir ty , the dir t may appear on the cop y . * Before star t cleaning, BE SURE TO TURN OFF THE MAIN POWER SWITCH, then open the front co ver . 1 Open the front co ver .
1 2 3 4 5 6 7 8 9 10 11 12 8-4 MAINTENANCE 2. SIMPLE TR OUBLESHOO TING Check the f ollowing items, and if the prob lem still occurs, call ser vice f or assistance. Copy density is too lo w Replace the toner car tridge. Set the image density properly with the manual density ke ys .
1 2 3 4 5 6 7 8 9 10 11 12 8-5 Copies are stained Counter measure Close the cov er firmly to shut out any outer light. Clean the original glass with a cloth moistened with cleaning liquid, then wipe a dr y cloth ov er the glass. Clean the original cover or tr anspor t belt with a cloth moistened with a neutral detergent.
1 2 3 4 5 6 7 8 9 10 11 12 8-6 MAINTENANCE.
1 2 3 4 5 6 7 8 9 10 11 12 9-1 9. SPECIFICA TIONS & OPTIONS 1. e-STUDIO45/35 specifications .................................................. 9-2 2. Specifications of options ............................................................ 9-3 3. P ack ing list .
1 2 3 4 5 6 7 8 9 10 11 12 9-2 SPECIFICA TIONS & OPTIONS Model Name DP-4500/3500 T y pe Desktop type (Console type when the paper feed pedestal is installed) Or iginal Glass Fixed (original ref er.
1 2 3 4 5 6 7 8 9 10 11 12 9-3 *Specifications and appearance are subject to change without notice in the interest of product improv ement. 2. SPECIFICA TION OF OPTIONS Reversing A utomatic Document Feeder Model Name MR-3012 Copy Sides Single-side, Duple x Number of Or iginals Up to 100 originals (13~22 lb.
1 2 3 4 5 6 7 8 9 10 11 12 9-4 SPECIFICA TIONS & OPTIONS 2. SPECIFICA TION OF OPTIONS (Cont.) Finisher Model Name MJ-1011 MJ-1012 MJ-1013 T y pe Hanging T ype Floor T ype Floor T ype Copy Size LD , LG, L T , L T -R, ST , ST -R P aper Thickness 17~22 lb .
1 2 3 4 5 6 7 8 9 10 11 12 9-5 Hole Puncher (Options f or MJ-1012/MJ-1013) Japan and most of Europe (MJ-6001E) Nor th America (MJ-6001N) F rance (MJ-6001F) Sweden (MJ-6001S) Number of punch holes and hole diameter 2 holes (6.5 mm dia.) 2/3 holes s witchable (8.
1 2 3 4 5 6 7 8 9 10 11 12 9-6 SPECIFICA TIONS & OPTIONS 3. P A CKING LIST Operator’ s Manual W arr anty Sheet P acking List Unpacking Instructions Set-up Instructions Operator’ s Manual P ock.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba e-studio 35 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba e-studio 35 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba e-studio 35 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba e-studio 35 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba e-studio 35 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba e-studio 35 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba e-studio 35 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba e-studio 35. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba e-studio 35 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
