Benutzeranleitung / Produktwartung e-studio 222cp des Produzenten Toshiba
Zur Seite of 75
Digital LED Colour Printer User’s Gu id e.
Preface > 2 P REFACE Every effort has been made to ensure that t h e information in this document is complete, accurate, and up-to-date. T he manufacturer as sumes no responsibility for the results of errors beyond its control.
Emergency first aid > 3 E MERGENCY FIRST AID Take care with toner powder: If swallowed, give small amounts of cold water and seek medical attention. DO NOT attempt to induce vomiting. If inhaled, move the person to an op en ar ea for fresh air. Seek medical attention.
Disclaimer notic e > 4 D ISCLAIMER NOTICE The following notice sets out the exclusions and limitations of liabil ity of TOSHIBA TEC CORPORATION (includ ing its employees, agents and sub-contractors) to any purchaser or user (“User”) of the e-STUDIO222CP/262CP incl udi ng its accessories, options and bundled software (“Product”).
Contents > 5 C ONTENTS Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Emergency first aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Importer to the EU/authorised representative .
Contents > 6 Usage menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Administrator Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Print statistics . . . . . . . . . . . .
Notes, cautions and warnings > 7 N OTES , CAUTIONS AND WARNINGS For the protection of your product, and in or der to ensure that you benef it from its full functionality, this model has b een designed to operate only with genuine original toner cartridges.
About this guide > 8 A BOUT THIS GUIDE D OCUMENTATION SUITE This guide is part of a suite of online and printed documentation provided to hel p you become familiar with your product and to make the best use of its many powerful features.
About this guide > 9 O N - LINE USAGE This guide is intended to be read on sc r een using Adobe Reader. Use the navigation and viewing tools provided in Adobe Reader . There are many cross-references with in this book, each highlighted as blue text .
Introduction > 10 I NTRODUCTION Congratulations on choosing this colour print er. Your new printer is designed with advanced features to give you cle ar, vibrant colour pr ints and crisp black and white pages at high speed on a range of print media for the office.
Introduction > 11 O VERVIEW F RONT VIEW 1. Output stacker , face down. Standard printed copy delivery point. Holds up to 150 sheets at 8 0g/m². 2. Operato r panel. Menu driven operator controls and LCD panel a . 3. Paper tr ay . Standard paper tra y .
Introduction > 12 R EAR VIEW When the rear paper stacker is folded do wn pa per exits the printer through the rear of the printer and is stacked here face up. This is mainly used for heavy pr int media. When used in conjunction with the multi purpose feed tray, the paper path th rough the printer is essentially straight.
Introduction > 13 G ETTING STARTED P OWER SAVING MODE If you do not use the machine for a while, it will enter the power saving mode to control the power consumption of the device. To cancel or initiate power saving mode, press the Power Save button on the control panel.
Paper recommendations > 14 P APER RECOMMENDATIONS Your printer wi ll handle a variety of prin t media, includi ng a range of paper weights and sizes, labels and envel opes. This section prov ides general advice on choice of media, and explains how to use each type.
Paper recommendations > 15 M ULTI PURPOSE TRAY The multi purpose tray can handle the same si zes as the cassette trays but in wei ghts up to 220 g/m² . For very heavy paper stock use the face up (rear) paper stacker. This ensures that the paper path through th e printer is almost strai ght.
Loading paper > 16 L OADING PAPER C ASSETTE TRAYS 1. Re move the paper tra y from the printer . 2. F an the paper to be loaded at the edges (1) and in the middle (2) to ensure that all sheets are properly separated, then tap th e edges of the stack on a flat surface to make it flush again (3).
Loading paper > 17 3. Load paper (letter headed paper face down and top edge tow ards the front of the printer), as shown. 4. Adjust the rear stopper (a) and paper guides (b) to the size of paper being used. 5. Close the paper tra y gently . To prevent paper jams: > Do not leave space b etween the paper and the guides and rear stopper .
Loading paper > 18 > Do not pull the paper tr ay out during prin ting (except as descri bed below for the 2nd tra y). NOTE > If you have two trays and you are printing from the 1s t (upper) tray, you can pull out the 2nd (lo wer) tray during printing to reload it.
Loading paper > 19 M ULTI PURPOSE TRAY 1. Open the multi purpose tr ay (a). 2. Fold out the paper supports (b). 3. Press gently down on the paper platform (c) to ensure it is latched down. 4. Load the paper and adjust the paper guides (d) to the size of paper being used.
Operation > 20 O PERATION e-STUDIO222CP For full details of how to use the machine and any optional access ori es to print jobs efficiently and effectively, please refer to the Printing Guide and the Barcode Guide.
Menu functions > 21 M ENU FUNCTIONS This section lists the menus accessed via the co ntrols on the printer’s operator panel and displayed in the LCD window. O PERATOR PANEL 1. READY LED ON: Ready to receiv e data. BLINK 1 (0.8 sec interval): Processing data.
Menu functions > 22 7. OK Button In the ONLINE or OFFLINE mode: enters the Menu mode. In the Menu mode: determines th e setting selected. 8. CANCEL Button Deletes the data being printed or received when pressed for two se conds or longer .
Menu functions > 23 H OW TO CHANGE THE SETTINGS - USER I t s h o u l d b e n o t e d t h a t m a n y o f t h e s e s e t t i n gs can be, and often are, overridden by settings in the Windows printer drivers.
Menu functions > 24 8. Press the up or down MENU button until th e “item” you want to chan ge is displaye d. 9. Press the OK button. 10. Using the up or down MENU button, identif y the parameter as required. 11. Press the OK bu t t o n to e n t e r a n a s t er i s k ( *) o n the right side of the setting selected.
Menu functions > 25 I NFORMATION MENU This menu provides a quick method of list ing various items stored wit hin the printer. STORED JOB NO T FOUND PRINT DELETE Used to print out a stored job in the SD card. “NOT FOUND” will be display e d where a file is unavailable.
Menu functions > 26 S HUTDOWN MENU T h i s i t e m s h o u l d a l w a y s b e s e l e c t e d b e f o r e s w i t c h i n g t h e p r i n t e r o f f , t o e n s u r e t h a t n o d a t a is lost. P RINT MENU This menu provides adjustment of various print job related functions .
Menu functions > 27 TONER S AVE MODE ON OFF This function works effectiv ely only if the data i nput is color RGB data. This sett ing is vali d in PS and PCL, but does not take effect in the following case s. (1) PS: If Co lor Matching is s et OFF .
Menu functions > 28 M EDIA MENU This menu provides adjustment to suit a wide range of print media. ITEM SETTINGS EXPLANATION TRA Y1 PAPERSIZE A4 /A5/ A6/B5/ LEGAL14/LEGAL13.5/ LEGAL13/LETTER/ EXECUTIVE CUSTOM Selects the s ize of paper lo aded in T ray 1 (upper tray if both tra ys installed).
Menu functions > 29 MPT P APERSIZ E A4 A5 A6 B5 LEGAL14 LEGAL13.5 LEGAL13 LETTER EXECUTIVE CUSTOM COM-9 ENVELOPE COM-10 ENVELOPE MONARCH ENV DL ENVELOPE C5 ENVELOPE INDEX CARD Selects the s ize of paper to be fed from the multi purpose tray . For CUST OM setting see X -DIMENSION and Y -DIMENSION in “Print menu” on pa ge 26 .
Menu functions > 30 C OLOR MENU The printer automatically adjusts colour bala nce and density at appropriate intervals, optimising the printed output for bright white paper viewed in natural daylight conditions. The items on this me nu provid e a means of changing the default settings for special or particularly difficul t print jobs.
Menu functions > 31 S YS CONFIG MENU This menu adjusts general printer setting s to suit the way you prefer to work. CMYK CONVERSION ON OFF Setting to “OFF” wi ll simplify t he convers ion process of CMYK data, which will redu ce the proc essing time.
Menu functions > 32 PCL EMULATION This menu controls sett ings effective when th e printer is operating in PCL emulati on mode. JAM RECOVERY ON OFF Specifies whether the pri n ter should perform jam recovery after a paper jam has occurr ed.
Menu functions > 33 PPR EMULATION This menu controls setting s ef fective when the printer is op erating in PPR emulation mode. PEN WIDTH ADJUST ON /OFF When minimum width is specified in PCL, s ometimes a 1-dot line, looks broken.
Menu functions > 34 FX EMULATION This menu controls settings ef fective when the printer is op erating in FX emulation mode. FIT TO LET TER DISABLE ENABLE Sets the printi ng mode that can fit prin t data, equivalent to 11 inches (66 lines), in the LETTER -size printable area.
Menu functions > 35 USB MENU This menu controls the operation of t he printer’s USB data interface. N ETWORK MENU This menu controls the operat ion of the pr inter’s 10Base-T/100Base- TX network i nterface. ITEM SETTINGS EXPLANATION SOFT RESET ENABLE / DISABLE Enables or disables the SOF T RESET command.
Menu functions > 36 IPV4 ADDRESS xxx.xxx.xxx.xxx Current assign ed IP address. T o change, press OK and use Menu buttons to incremen t 1st octet, th en press OK again to move on to next oc tet. When 4th octet ha s been set, press OK again to register new address.
Menu functions > 37 M EMORY MENU Not displayed as default . This menu is displayed onl y when set to ENABLE in OP MENU of Administrator menu. This menu sets the conditions of memory allocated to t he buffer and resource. ITEM SETTINGS EXPLANATION RECEIVE BUF SIZE AUTO 0.
Menu functions > 38 S YS A DJUST MENU Not displayed as default . This menu is displayed onl y when set to ENABLE in OP MENU of Administrator menu. M AINTENANCE MENU This menu p rovides acce ss to va rious p rinter m aintenan ce functi ons. ITEM SETTINGS EXPLANATION X ADJUST +2.
Menu functions > 39 U SAGE MENU This menu is for information onl y, and provides an indication of total usage of the printer and the expected life lef t in its consumable it em s. This is parti cularly useful if you do not have a full set of replacement consumables to hand and you need to know ho w soon you will need them.
Menu functions > 40 A DMINISTRATOR M ENU This menu should only be ch anged by the System Administrators. In order to gain access to this menu, follow the instructions in “How to change the setti ngs - admin istrator” on page 23 . This menu is in ENGLISH only.
Menu functions > 41 OP MENU (cont.) FX EMULA TION ENABLE DISABLE Set up ENABLE/DISABLE condition for FX EMULA TI ON category . If DISABLE is selected, FX EMU LA TION category of USERS MENU will not appear . USB MENU ENABLE DISABLE Set up ENABLE/DISABLE condition for USB MENU category .
Menu functions > 42 SECURITY MENU JOB LIMIT A TION OFF ENCRYPTED JOB Job limitation mode control. Jobs other than specif ied ones are reject ed. MAKE SECURE SD-M EXECUTE SD Card encoding fu nctio n is made effe ctive. Formation of the cipher key and encoding function (security mode) information is turned on.
Menu functions > 43 SECURIT Y MENU (cont.) RESET CIPHER KEY EXECUTE Resets a cipher key to be used on an encrypted SD card. When this processing is done, all data stor ed on the SD card cannot be restored. After executi on, the following confirmat ion messages will appear .
Menu functions > 44 FILE SYS MAINTE2 CHK FILE SYS EXECUTE Executing th is function will resolve any mismatch between the actual and the displayed free space of the fi le system and recov er the manage ment data (F A T informat ion). Note 1: It take s several seconds to complete this funct ion.
Menu functions > 45 LANGUAGE MENU LANG INITIALIZE EXECUTE Initi alise the message file loaded in FLASH MEMORY . If NO is sele cted, the mac hine will go bac k to the source menu. The pr ocedure for cl earing the disk will st art immediately after the menu and machi ne reboot.
Menu functions > 46 P RINT STATISTICS This menu should only be ch anged by the System Administrators. In order to gain access to this menu, follow the instructions in “How to change the setti ngs - admin istrator” on page 23 , but hold down the Menu button instead of the OK button.
Maintenance > 47 M AINTENANCE R EPLACING CONSUMABLE ITEMS Only use genuine original consumables to ensure the best quality and performance from your hardware. Non origina l products may adversely affect your printer's performance an d invalidate your warranty.
Maintenance > 48 2. Note the positions of the four cartridges. It is essential that they go back in the same order . (a) S lide the coloured release collar on th e cartridge to be replaced fully towards the right hand side of the printer.
Maintenance > 49 5. Remo ve the new cartridge from its box but leav e its wrappi ng material i n place for the moment. 6. Gently shake the new cart ridge from end to end sever al times to loosen and distribute the toner evenly inside the cartridge.
Maintenance > 50 11. Gently wipe the LED head surface with a clean, lint free cloth. 12. Finally , close the top cov er and press down firmly at both sides so that the cov er latches closed. I MAGE DRUM REPLACEMENT The image drum assembly comes complete with its own installation detail s which give full instructions on rep lacement.
Maintenance > 51 R EPLACING THE TRANS FER BELT UNIT The belt unit is located und er the image drum assembly. Switch off the printer and allow the fuser to cool for about 10 minutes before opening the cover. 1. Press the cov er release and open the print er’s top co ver fully .
Maintenance > 52 4. Pull the locking leve rs at each side of the transfer b elt up and towards the front of the machine. 5. Using the locking lev ers (a), lift the belt (b ) upwards and withdr aw from the machine. 6. Lower the new belt unit into place, with the drive gear tow ards the rear of the printer .
Maintenance > 53 F USER REPLACEMENT The fuser is located inside the printer just behind the toner cartri dges. 1. Press the cov er release and open the print er’s top co ver fully . 2. Identify the fuser handle (a) on the top of the fuser unit. 3.
Maintenance > 54 8. Push the two retaining levers (b) tow ards the rear of the pri nter to lock the fu ser in place. 9. Finally , close the top cov er and press down firmly at both sides so that the cov er latches closed.
Maintenance > 55 C LEANING ... THE UNIT CASING 1. Switch the printer off . 2. Wipe the unit surface with a soft cloth moistened sparingly with water or neutr al detergent. 3. Use a soft dry cloth to dry t he unit surface. 4. Switch the printer on. .
Installing upgrades > 56 I NSTALLING UPGRADES This section explains how to instal l optional equipment into your printer. This includes: > additional RAM memory > SD card ( e-STUDIO262CP only.
Installing upgrades > 57 4. Carefully remove the new memory board from its wrappi ng. T ry to handle the board only by its short edges, avoiding contact wi th any metal parts as far as possi ble. In particular , avoid touching the edge connector . 5.
Installing upgrades > 58 11. Replace the access co ver and latch it closed. 12. Reconnect t he AC power cable and switch the printer on. 13. When the printer is ready , print a menu map as follows: (a) Press the OK bu tton. (b) Press the Menu down button t hen the OK button to select the INFORMATION MENU .
Installing upgrades > 59 SD CARD (e-STUDIO262CP ONLY ) The optional SD card enables collating of prin ted pages and can be us ed to stor e overlays and macros, fonts, and secure or pr oof documents wait ing to be printed. 1. Switch the printer off and di sconnect the AC power cable.
Installing upgrades > 60 5. Gently push the SD card into the slot as shown. 6. Replace t he inner access cov er (b) and turn locking screw (a) clockwise to secure it shut. 7. Replace the access co ver and latch it closed. 8. Reconnect t he AC power cable and switch the printer on.
Installing upgrades > 61 A DDITIONAL PAPER TRAY 1. Switch the printer off and di sconnect the AC power cable. 2. Place additi onal paper tr ay on desired loc ation. 3. Observing safety rules for li fting and, usin g locating guides, place printer on top of the additional paper tr ay .
Installing upgrades > 62 S ETTING THE DRIVER DEVI CE OPTIONS Once your new upgrade has been installed, yo u may need to update the printer dri ver so that the additional features are available to your applications. Accessor ies such as additional paper trays will only be usable if the printer driver on your computer knows they are there.
Installing upgrades > 63 Panther (Mac OS X 10.3) 1. Open the Mac OS X Print & F ax Preferences. 2. Click Printing . 3. Click Set Up Printers… . 4. Ensure your machine is selected and click Show Info… . 5. Click the menu and choose Installable Options… .
Troubleshooting > 64 T ROUBLESHOOTING Provided that you follow the recommendations in this guid e on the use of print media, and you keep the media in good condition prior to us e , y o u r p r i n t e r s h o u l d g i v e y e a r s o f r e l i a b l e service.
Troubleshooting > 65 P APER SENSOR ERROR CODES CODE # LOCATION CODE # LOCATION 370 Duplex 390 MP T ray 371 Duplex 391 Paper T r ay 372 Duplex 392 2 nd Paper tr ay a a.
Troubleshooting > 66 C LEARING PAPER JAMS 1. If a sheet is well adv anced out of the top of the printer , simply grip it and pull gently to dra w it fully out. If it does not remo ve easily , do not use excessiv e force. It can be removed from the rear la ter .
Troubleshooting > 67 5. Look into the printer to check whether any sheets of paper ar e visible on any part of the belt unit. (a) To remove a sheet with it s leading edge at the front of the belt (.
Troubleshooting > 68 through the drum c avity area. Then allo w the pressure release lever to rise again. (d) To remove a sheet in the fuser, move the two retaining levers (e) towards the front of the ma chine to release th e fuser. Wi thdraw the fus er unit usin g the handle (f).
Troubleshooting > 69 6. If you were duplex printing when the ja m occurred, check the duplex paper path: (a) Pull the locking levers at each side of the tr ansfer belt up and tow ards the front of the machine. (b) Using the locking leve rs (a), lift the belt (b) upwards and wi thdraw from the machine.
Troubleshooting > 70 8. Lower the top cover but do not press down to latch it closed y et. This will protect the drum from exces sive exposure to room li ghting while y ou check the remaining areas for jammed sheets. 9. Open the rear exit tray (h) and check for a sheet of paper in the rear path area (i).
Troubleshooting > 71 D EALING WITH UNSATISFACTORY PRINTING SYMPTOMS POSSIBLE CAUSES STEPS TO TAKE V ertical whi te lines can be seen on the printed page. The LED head is dirty . Wipe the LED head with a soft, lint-free clo th. The toner is low. Open th e top cover and tap the cartridge a few times to evenly distribute any remaining toner .
Troubleshooting > 72 Horizont al Lines an d spots appear periodically . When the inte rval is about 94mm (4in), the im age drum (the green tube) is damaged or dirty . Wipe it lightly wi th a soft cloth. Replac e the image drum cartridge when it is damaged.
Specifications > 73 S PECIFICATIONS e-STUDIO222C P - FC-222CP e-STUDIO262C P - FC-262CP ITEM SPECIFICATION e-STUDIO22 2CP e-STUDIO262C P Dimensions 410 x 504 x 242mm (W x D x H) W e ight 21Kg approx. Power suppl y 220 to 240V AC @ 50/60 Hz ± 2% Po wer consump tion Sleep: - < 1.
Index > 74 0MM10010400 I NDEX B Belt how to replace ............ ...... 51 life remaining .... ............ .... 39 C Cleaning the LED head .... ...... 55 Colour adjusting ........... .......... ...... 30 D Duplex paper size and weight limits .....
R101020J6400-TTEC 07113501 iss1.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba e-studio 222cp (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba e-studio 222cp noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba e-studio 222cp - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba e-studio 222cp reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba e-studio 222cp erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba e-studio 222cp besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba e-studio 222cp verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba e-studio 222cp. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba e-studio 222cp gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
