Benutzeranleitung / Produktwartung C665 des Produzenten Toshiba
Zur Seite of 161
User ’ s Manual Satellite C660/C665/C660D/C665D Satellite Pro C660/C660D Series.
User ’s Manual ii T able of Content s Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual iii Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D Front with t he display closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Lef t side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual iv Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D Panel power on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6- 1 1 System automatic Sleep/Hib ernation . . . . . . . . . . . . . . . . .
User ’s Manual v Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D Copyright © 2010 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA.
User ’s Manual vi Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D Labelflash is a trademark of Y AMAHA CORPORA TION. WinDVD is a trademark of the Corel Corporations. Other trademarks and registered trad emarks not listed above may be used in this manual.
User ’s Manual vii Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D Irvine, California 9261 8-1697 T elephon e: (949) 583-3000 EU Declara tion of Confor mity This product is carrying the CE-Ma r k in accordance wi th the related European Directives.
User ’s Manual viii Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D The consequences of the use of this product in non-approved wo rking environments may be: ■ Interference with other devices or machines in the near surrounding area.
User ’s Manual ix Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D V ideo St andard notice THIS PRODUCT IS LICENSED UNDER THE A VC, THE VC-1 AND MPEG-4 VISUAL P A TENT PORTFO LIO LICENS E F.
User ’s Manual x Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D Disposing of the computer and the computer's batteries ■ Discard this compu ter in accordance with appli cable laws and regulations. For further information, cont act y our local government.
User ’s Manual xi Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D Optical disc drive safety instructions Panasonic System Netw or ks ■ DVD Super Multi UJ890 Be sure to check the precautions at the en d of this section. ■ The DVD Super Multi drive model employs a laser system.
User ’s Manual xii Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D HIT ACHI-LG Da ta Storage, Inc. ■ DVD Super Multi G T30N/G T30F T OSHIBA SAMSUNG ST ORAGE TECHNOL OGY ■ DVD Super Multi TS-L633C/TS-L633Y Hitachi-LG Data Storage, Inc.
User ’s Manual xiii Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D Precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT .” T o use this model properly , read the instruction manual carefully a nd keep this manual for your future reference.
User ’s Manual xiv Preface Congratulations on your purchase of the Satellite C660/C665/C660D/C665D/Satell ite Pro C660/C660D series computer . This powerful notebook computer provides excellent expansion capability , includes multimedia functionality , and is designed to provide years of reliable, high-performanc e computing.
User ’s Manual xv Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D Icons Icons identify ports, dials, and other parts of your computer . The indicator pane l also uses icon s to identify the co mponent s it is provid ing inform ation on. Keys The keyboard keys are used in th e te xt to describe many computer operations.
User ’s Manual xvi Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D T erminology This term is defined in this document as follows: Star t The word " Sta rt " refers to the " " button in Windows ® 7.
User ’s Manual xvii General Precautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . Ho we ver , certain precautions should be observed to further reduce the risk of personal injury or damag e to the computer .
User ’s Manual xviii Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D Creating a computer-friendly enviro nment Place the computer on a flat surface that is large enough for the computer and any ot her items you are using, s uch as a pri nter .
User ’s Manual xix Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D Pressure or imp act damage Do not apply heavy pressure to the com puter or subject it to any form of strong impact as this can damage the computer's compone nts or otherwise cause it to malfu nction.
User ’s Manual 1-1 Chapter 1 Getting S t arted This chapter provides an equ ipment checklist, and basic informa tion to start using your computer . Equipment checklist Carefully unpack your comp uter , taking care to save the box and packaging materials for future use.
User ’s Manual 1-2 Getting S tarted Sof tware The following Wi ndows ® operating system and uti lity sof tware are pre- installed. ■ Windows 7 ■ Windows XP (for Satellite Pro series) ■ TOSHIB.
User ’s Manual 1-3 Getting S tarted Getting St arted This section provides basic information to start using your computer . It covers the following topics: ■ Connecting the AC adaptor ■ Opening .
User ’s Manual 1-4 Getting S tarted Connecting the A C adaptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power .
User ’s Manual 1-5 Getting S tarted 1. Connect the power cord to the AC adaptor . Figure 1-1 Connecting the power cord to the AC adap tor (2-pin plug) Figure 1-2 Connecting the power cord to the AC adap tor (3-pin plug) 2. Connect the AC adaptor ’s DC output plug to the DC IN 19V jack on the right of the computer .
User ’s Manual 1-6 Getting S tarted Opening the disp lay The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one ha nd so that the ma.
User ’s Manual 1-7 Getting S tarted T urning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Powe r-Up Modes fo r more information.
User ’s Manual 1-8 Getting S tarted T urning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode.
User ’s Manual 1-9 Getting S tarted Benefits of Sleep Mode The Sleep Mode feature provide s the following benefits: ■ Restores the previous workin g environment more rapid ly than does the Hibernation Mode feature.
User ’s Manual 1-10 Getting S tarted When you turn the power back on, you can continue where you left when you shut down the computer . Sleep Mode limitations Sleep Mode will not function under the following conditions: ■ Power is turned back on immediately after shutting down.
User ’s Manual 1-1 1 Getting S tarted S tarting Hibernation Mode T o enter Hibernation Mode, follow the steps below . 1. Click Start . 2. Point to the arro w icon ( ) and then select Hibernate from the menu.
User ’s Manual 1-12 Getting S tarted System Recovery Options There is a hidden partition allocated on the hard disk drive for the System Recovery Options. This partition stores files which can be used to repair the syst em in the event of a problem.
User ’s Manual 1-13 Getting S tarted System Recovery This section describes the creatio n of Recovery Media and their use. Creating Recovery Media This section describes how to crea te Recovery Media.
User ’s Manual 1-14 Getting S tarted 5. After Recovery Media Creator starts , select the type of media and the title you wish to copy , and then click the Create button. Restoring the pre-inst alled softw are from the Reco very hard disk drive A portion of the total hard disk dr ive space is configured as a hidden recovery partition.
User ’s Manual 1-15 Getting S tarted Restoring the pre-inst alled softw are from your crea ted Recovery Media If the pre-installed files are damaged , you are able to either use the Recovery Media you have created or the hard disk drive recovery process to restore the computer to the state it was in when you originally received it.
User ’s Manual 2-1 Chapter 2 The Grand T our This chapter identifies the various co mponen ts of the computer - it is recommended that you become famili ar with each before you operate the computer . Front with the display closed The following fig ure shows the computer ’ s front with its display panel in the closed position.
User ’s Manual 2-2 The Grand T our Lef t side The following figure shows the comp uter ’s left side. Figure 2-2 The left side of the computer Bridge media s lot This slot lets you insert an SD™/SDHC™/SDXC™ memory card, miniSD™/micr oSD™ Card, and MultiMediaCard™.
User ’s Manual 2-3 The Grand T our External monitor port This port provides 15-pin, analog VGA port. This port allows you to connect an external monitor to the computer .
User ’s Manual 2-4 The Grand T our Right side The following figure shows the computer ’s right side. Figure 2-3 The right side of the comp uter Back The following figure shows the computer ’s back. Figure 2-4 The back of the computer 1. Optical disc drive 3.
User ’s Manual 2-5 The Grand T our Underside The following figure shows the undersi de of the computer . Y ou shou ld ensure that the disp lay is closed befo re the computer is turned over to avoid causing any damage. Figure 2-5 The underside of the computer 1.
User ’s Manual 2-6 The Grand T our Front with the display op en This section shows the computer with the display panel open. In order to open the display , lift the display panel up and position it at a comfortable viewing angle for you. Figure 2-6 The front of the computer with th e display panel open * Provided with some models.
User ’s Manual 2-7 The Grand T our Web Camera Web Camera is a device that allows you to record video or take photographs with you r computer . Y ou can use it for video chatting or video conferences using a communication tool such as Windows Live Messen ger .
User ’s Manual 2-8 The Grand T our Indicators This section explains ind icator functions. System indica tors LED system indicators next to their resp ective icons, glow when specific computer operations are in progress.
User ’s Manual 2-9 The Grand T our Keyboar d indi cat ors The following figure s show the positions of the CAPS LOCK indicator and the NUM LOCK indicator which show the following condition s: ■ When the CAPS LOCK indicator glows, the keyboard will produce capitals when any letter is typed.
User ’s Manual 2-10 The Grand T our Optical disc drives The computer is installed with a DVD Super Multi d rive. A Serial A T A interface controller is used for optica l disc opera tion. When the computer is accessing a optical disc, an indicator on th e drive glows.
User ’s Manual 2-1 1 The Grand T our DVD Su per Multi d rive The full-size D VD Super Multi drive module l ets you record data to rewritable CD/DVDs as well as run either 12 cm (4.
User ’s Manual 2-12 The Grand T our Figure 2-10 The AC adaptor (3-pin plug) ■ Depending on the model in questio n, either a 2-pin or 3-pin adaptor/power lead will be bund led with the computer.
User ’s Manual 3-1 Chapter 3 Hardware, Utilities and Options Hardware This section describes the hardware of your computer . The actual specifications ma y vary depending on the model you purchased. Processor CPU Y our co mputer is equipped with one processor and processor type varies depending on model.
User ’s Manual 3-2 Hardware, Utilities and Options Memory Power Memory slots 1 GB, 2 GB or 4 GB memory modules can be installed in the computer's two memory slots for a maximum of 8 GB system memory . This computer can be equipped with memory modules of a maximum size of 8 GB.
User ’s Manual 3-3 Hardware, Utilities and Options Disks Legal Footnote (Battery Life) For more information regarding Batter y Life, please refer to the Legal Footnotes section in Appendix E. RTC battery The internal RTC battery backs up the Real T ime Clock (RTC) and calendar .
User ’s Manual 3-4 Hardware, Utilities and Options Optical disc drive Display The computer's internal disp lay panel supports high-resolution video graphics and can be se t to a wide ran ge of viewing angl es for maximum comfort and readability .
User ’s Manual 3-5 Hardware, Utilities and Options AMD ® V ari-Bright ™ Y our model may include the AMD ® V ari-Bright ™ feature that can save the computer's power consumption by opt imizing picture contrast on the internal LCD.
User ’s Manual 3-6 Hardware, Utilities and Options Multimedia Communications Sp ecial features The following features are eithe r un ique to TOSHIBA computers or are advanced features which ma ke the computer more con venient to use. Access each function using the followi ng procedures.
User ’s Manual 3-7 Hardware, Utilities and Options Hot keys Hot keys are specific key combinations that let you quickly change t he system configuration directly from the keyboard without running a system program.
User ’s Manual 3-8 Hardware, Utilities and Options Heat dispersal *1 T o protect against overhe ating, the processor has an internal temperature s ensor so that, if the computer's internal temperature rises to a certain level, the cooling fan is turned on or the processing speed is lowered.
User ’s Manual 3-9 Hardware, Utilities and Options Utilities and Applications This section describes the pre-installed utilities that come w ith the computer and details how to st art them. For further information on their operation, you may refer to each utili ty's online manua l, help files or README.
User ’s Manual 3-10 Hardware, Utilities and Options TOSHIBA Face Recognition TOSHIBA Face Recognition uses a face verification library to ve rify the face da ta of users when they log in to Win dows. If the verification is successful, the user will be logged into Windows automatica lly .
User ’s Manual 3-1 1 Hardware, Utilities and Options TOSHIBA HDD/SSD Alert Utility This utility includes wizard functions to monitor the Disk Drive operating status and execute the system backup. T o access the utility , click Start -> All Programs -> TOS HI BA -> Utilities -> HDD SSD Alert .
User ’s Manual 3-12 Hardware, Utilities and Options TOSHIBA Bulletin Board Bulletin Board is a convenient pla ce to pin things to visually organize in a fun and creative way . Simply drag and drop your favorite pictures, files or notes to pin them on th e Board.
User ’s Manual 3-13 Hardware, Utilities and Options Optional devices Optional devices can expand the computer's capabilities and its versatility .
User ’s Manual 3-14 Hardware, Utilities and Options Figure 3-1 Examples of memory media Memory media This section provides the important safety precautions in order to handle your memory media.
User ’s Manual 3-15 Hardware, Utilities and Options Memory media format New medi a cards ar e format ted accor ding to specific standards. If you wish to reformat a media card, be sure to do so with a device that uses media cards.
User ’s Manual 3-16 Hardware, Utilities and Options About the write-protect The following memory media ha ve a function for protect. ■ SD Card (SD memory card, SDHC memory card, SDXC memory card) ■ MultiMediaCard (MMC) Ins ert ing a memo ry me dia The following instru ctions apply to all types of supported media device s.
User ’s Manual 3-17 Hardware, Utilities and Options 3. Press the memory medi a to partia lly extend it out of the computer . 4. Grasp the media and remove it. Figure 3-3 Removing memory media Additional mem ory m odule Y ou can install additional memory into th e computer in order to increase the amount of system memory that is avai lable.
User ’s Manual 3-18 Hardware, Utilities and Options Installing a memory module T o install a memory module, follow the steps as detailed below: 1. Shut down the compu ter - make su re the Power indicator is off (refer to the T urning off the po wer section in Chapter 1, Getting S t arted if required).
User ’s Manual 3-19 Hardware, Utilities and Options 6. Slide your fingernail or a thin object under the cover and lift it of f. Figure 3-4 Removing the memory module cover 7.
User ’s Manual 3-20 Hardware, Utilities and Options 8. Seat the memory module cover in place and secure it with the screws. Figure 3-6 Seating the memory module cover 9. Install the battery pa ck - refer to Replacing the battery pack section in Chapter 6, Power and Powe r-Up Modes, if required.
User ’s Manual 3-21 Hardware, Utilities and Options 4. T urn the computer upside down and remove the battery pack (refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, if required).
User ’s Manual 3-22 Hardware, Utilities and Options Connecting the monitor cable 1. T urn the computer's power off. 2. Connect the monitor cable to the external monitor port. Figure 3-8 Connecting the monitor ca ble to the external monitor port 3.
User ’s Manual 3-23 Hardware, Utilities and Options Security lock A security locks enable you to ancho r your computer a desk or other heavy object in order to help prevent unautho rized removal or theft.
User ’s Manual 3-24 Hardware, Utilities and Options Optional accessories Y ou are able to add a numb er of options and accessories in order to ma ke your computer even more powerful and convenient to use .
User ’s Manual 4-1 Chapter 4 Operating Basics This chapter describes the basic operations of your computer , highlights the precautions that should be taken when using it. Using the T ouch Pad T o use the T ouch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.
User ’s Manual 4-2 Operating Basics We b Ca m e r a Web Camera is a device that allows you to record video or take photographs with your compute r . Y ou can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger .
User ’s Manual 4-3 Operating Basics Using the T OSHIBA Face Recognition TOSHIBA Face Recognition uses a face verificati on library to verify the face data of users when they log in to Windows. The user can thus avoid having to enter a password or the like, which makes the login process easier .
User ’s Manual 4-4 Operating Basics How to register the Face Re cognition Dat a T ake a picture for faci al verification purposes, and register th e data needed when you log in. T o register the data needed when you log in, follow the steps as de scribed belo w: 1.
User ’s Manual 4-5 Operating Basics How to Dele te the Face R ecognition Dat a Delete image data, account information, and personal record data created during registration. T o delete the Face Recognition Data, follow the steps as described below: 1.
User ’s Manual 4-6 Operating Basics 1:1 Mode Login screen 1. T urn on the computer . 2. The Select Tiles screen will be displaye d. 3. Select St art face recognition () . 4. The Select Account screen will be displayed. 5. Select the account, and click the arrow button.
User ’s Manual 4-7 Operating Basics 2. Grasp the disc tray gently and pull until it is fully op ened. Figure 4-3 Pressing the eject button and pulling the disc tray open 3. Lay the disc, label side up, in the disc tray . Figure 4-4 Inserting a disc 4.
User ’s Manual 4-8 Operating Basics 5. Push the center of the disc tray to close it. Press gently until it locks into place. How to rem ove disc s when the disc tray will n ot open Pressing the eject button will not open the d isc tray when the computer power is off.
User ’s Manual 4-9 Operating Basics Import ant message Before you write or rewrite to an y of the media supported by the DVD Super Multi drive, please read and follow all of the setup and operati ng instructions in this section.
User ’s Manual 4-10 Operating Basics Before writing or rewriting with the DVD Super Mu lti drive ■ Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of .
User ’s Manual 4-1 1 Operating Basics ■ If the disc is poor in quality , or is dirty or damaged, wr itin g or rewriting errors may be noted - ensure that you check a ll discs for dirt or damage before you use them.
User ’s Manual 4-12 Operating Basics ■ Since the disc is based on the DVD standard, it might be filled with dummy data if the written data is less than about 1GB. Therefore, in these circumstance, even if you writ e only a small amount of data, it might take additional time to fill in the dummy data.
User ’s Manual 4-13 Operating Basics ■ Install, remove or connect external devices, including such items as a SD/SDHC/SDXC memory card, miniSD/microSD Card, MultiMediaCard, USB de vice, external monitor, or an optical digital device. ■ Use the audio/video control button to reproduce music or voice.
User ’s Manual 4-14 Operating Basics ■ Y ou might not be able to use the "Disc Backup" functio n of TOSHIBA Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW , DVD+R, DVD+R (Double Layer) or DVD+RW disc that was made with other software on a different optical media recorder.
User ’s Manual 4-15 Operating Basics TOSHIBA DVD PLA YER Please be aware o f the follow ing limitations when you use the TOSHIBA DVD PLA YER: Notes on use ■ "TOSHIBA DVD PLA YER" software is supported for playback of DVD- Video and DVD-VR.
User ’s Manual 4-16 Operating Basics ■ (Print Screen functions are di sabled even when running other applications besides "TOSHIBA DVD PLA YER" and when "TOSHIBA DVD PLA YER" is minimized.) Please close the "TOSHIBA DVD PLA YER" to use the Print Screen function.
User ’s Manual 4-17 Operating Basics St arting TOSHIBA DVD PLA YER Use the following procedure to start "TOSHIBA DVD PLA YER". 1. Insert a DVD-Video in the DVD Super Multi drive while Windows 7 is running. When a DVD-Video disc is set in the DVD drive, the following application selectio n screen may appear .
User ’s Manual 4-18 Operating Basics Media care This section provides tips on protecting data stored on your CDs and DVDs. Handle your media with care. Followi ng the simple precautions listed below will increase the life time of your media and protect the d ata stored on it.
User ’s Manual 4-19 Operating Basics T o launch the configuration dia log window for system sounds, follow the steps below . 1. Right-click the Speakers icon on the T askbar . 2. Select Sounds from the menu. Adjusting Microphone Le vel Follow the steps below to change the microphone recording level.
User ’s Manual 4-20 Operating Basics Wireless LAN The Wireless LAN is compatible wit h other LAN systems based on Direct Sequence S pread S pectrum / Orthogonal Fre quency Division Multiplexing radio technology that complies with the IEEE802.1 1 Wireless LAN standard.
User ’s Manual 4-21 Operating Basics Setting 1. Please make sure that the Wireless Communi cation function is on. 2. Click Start -> Control Panel -> Network and Internet -> Network and Sharing Center . 3. Click Set up a new connecti on or network .
User ’s Manual 4-22 Operating Basics Enable/Disa ble W ire less comm unica tion Y ou can enable or disable Wireless c ommunicati on function s by pressin g FN + F8 .
User ’s Manual 4-23 Operating Basics 1. T urn of f the power to the computer and to all external devices connected to the computer . 2. Plug one end of the cable i nto t he LAN jack. Press gently until yo u hear the latch click into place. Figure 4-6 Connecting the LAN cable 3.
User ’s Manual 4-24 Operating Basics Computer Ha ndling This section explains computer han dling and maintenance. Cleaning the compu ter T o help ensure long, trouble-free o per ation, keep the computer free of dust and dirt, and u se care with a ll liquids arou nd it.
User ’s Manual 4-25 Operating Basics ■ Do not carry your computer by ho lding an y of its protruding elements. Heat dispersal T o protect against overheating, the processor is equipped with an int.
User ’s Manual 5-1 Chapter 5 The Keyboard The computer ’s keyboard layouts ar e compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhanced ke yboard functions can be performed on the computer .
User ’s Manual 5-2 The Keyboard Function keys: F1 … F9 The function keys (not to be confused with the special FN key) are the nine keys at the top of your keyboard - these keys function differently from other keys.
User ’s Manual 5-3 The Keyboard Power Plan : Pressing FN + F2 changes the power settings. Sleep : Pressing FN + F3 switches the system to Sleep Mode. Hibernate : Pressing FN + F4 switches the system to Hibernation Mode. Output : Pressing FN + F5 changes the active display devi ce.
User ’s Manual 5-4 The Keyboard T ouch Pad: Pressing FN + F9 enables or disabl es the T ouch Pad function. Zoom: Pressing FN + Sp ace changes the display resolution. TOSHIBA Zooming Utility (reduce): Pressing FN + 1 reduces the icon size on the desktop or the font sizes wi thin one of the supported applicatio n windows.
User ’s Manual 5-5 The Keyboard This key has the same function as t he secondary (right) mouse button. Generating ASCII charact ers Not all ASCII characters can be generated using no rmal keyboard operation, but you are a ble to generate thes e characters using their specific ASCII codes.
User ’s Manual 6-1 Chapter 6 Power and Power-Up Modes The computer's p ower resources in clude the AC ad aptor , battery pack and any internal batteries.
User ’s Manual 6-2 Power and Power-Up Modes T able 6-1 Pow er conditions continued Monitoring of power condition As shown in the below table, the DC IN/Battery and Power indica tors on the system indicator alert you to the computer ’s operating capability and battery charge status.
User ’s Manual 6-3 Power and Power-Up Modes Power i ndica tor Check the Power indicator to determine the pow er status of the computer - the following indicator conditions shou ld be noted: Battery This section explai ns battery types, use, recharging me thods and handling.
User ’s Manual 6-4 Power and Power-Up Modes Real Time Clock (RTC) battery The Real Time Clock (RTC) battery provides power fo r the internal real time clock and calendar function and also main tains the system configuration while the computer is turned off.
User ’s Manual 6-5 Power and Power-Up Modes Charging the batteries When the power in the battery pack becomes low , the DC IN/Battery indicator will flash amber to indicate that only a few minutes of battery power remain.
User ’s Manual 6-6 Power and Power-Up Modes Battery charging notice The battery may not begin charging immediately under the followin g conditions: ■ The battery is extremely hot or cold (if the battery is extremely hot, it might not charge at all).
User ’s Manual 6-7 Power and Power-Up Modes Maximizing battery op erating time A battery's usefulness depends on how long it can su pply power on a single charge, while how long the c harg e la.
User ’s Manual 6-8 Power and Power-Up Modes ■ If you have extra battery p acks, rotate their use. ■ If you will not be using the system for an extended period, for example for more than one month, remove th e battery pack from the computer . ■ S tore spare battery pa cks in a cool dry place out of direct sunlight.
User ’s Manual 6-9 Power and Power-Up Modes 6. Slide and hold the battery release latch (2 ) to disengage the battery pack and then remove it from the computer (3). Figure 6-1 Releasing the battery pack Installing the battery pack T o install a battery pack, follow the steps as detailed below: 1.
User ’s Manual 6-10 Power and Power-Up Modes ■ Not Registered Click to delete a registered password. Before yo u can delete a password, you must first enter the current password correctly . ■ Owner S tring (text box) Y ou can use this box to associate te xt with the password.
User ’s Manual 6-1 1 Power and Power-Up Modes Window s utilities Y ou can configure various settin gs associated with both Sleep Mode and Hibernation Mode within the Power Options (to access it, Sta rt -> Control Panel -> System and Security -> Power Op tions ).
User ’s Manual 7-1 Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup program to configure your computer , and provides information on settings for various functions. Accessing HW Set up T o run the HW Setup program, click Start -> All Programs -> TO SH IB A -> Utilities -> HWSetup .
User ’s Manual 7-2 HW Setu p Setup This field displays the installed BIOS version , date and EC version . Password This option allows you to set or reset the user password for power on. User Password Lets you register a new password or change/remove an existing password.
User ’s Manual 7-3 HW Setu p Display This tab let s you customize your computer ’s display settings for either the internal display or an external monitor . Power On Display This tab allows you to select the display to be used when the computer is started.
User ’s Manual 7-4 HW Setu p Y ou can o verride the settings and manually select a boot device by pressing one of the following keys whil e the computer is booting: * In this computer , CD-ROM refers to the DVD Super Multi driver . T o change the boot drive, follow the steps below .
User ’s Manual 7-5 HW Setu p SA T A SA T A In terface set ting LAN Wake-up on LAN This feature lets the comp uter's power be turned on from shutdown when it receives a wake-up p acket (Magic p acket) from the LAN.
User ’s Manual 7-6 HW Setu p USB Legacy USB Support Use this option to enable or disabl e USB Legacy Emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard by setti ng the Legac y USB Support item to enabled.
User ’s Manual 8-1 Chapter 8 T r oubleshooting TOSHIBA have designed this computer for durability , ho wever , should problems occur you are able to use the procedures detailed in this chapter to help determi ne the cause.
User ’s Manual 8-2 T roubleshooting ■ Before you attach an external device you shou ld first turn the computer off, then when you turn the computer back on again it will recognize the new device.
User ’s Manual 8-3 T roubleshooting Hardware and system checklist This section discusses problems ca used by your computer ’s hardware or attached peripherals.
User ’s Manual 8-4 T roubleshooting Self test While booting up the computer , self te st is executed aut omatical ly and the TOSHIBA logo is displayed on the screen.
User ’s Manual 8-5 T roubleshooting AC power If you have trouble turning on the comp u ter with the AC adaptor connected you should check the status of the DC IN/Ba ttery indicator . Please refer to Chapter 6, Power and Power-Up Modes for further information.
User ’s Manual 8-6 T roubleshooting Check wh ether the battery i s hot or col d to the touch - if so, it will not charge prope rly and should be allow ed to reac h room te mperature before you try again.
User ’s Manual 8-7 T roubleshooting Real Time Clock Keyboard Keyboard problems can be caused by the setup and conf iguratio n of the computer - please refer to Chapter 5, The Keyboard for further in formation. Problem Pro cedure The BIOS setting and system date/time are lost.
User ’s Manual 8-8 T roubleshooting Internal display p anel Apparent computer's display pane l problems may be related to the computer's setup and configuration - please refer to Chapter 7, HW Setu p , for further information.
User ’s Manual 8-9 T roubleshooting DVD Supe r Multi drive For more inform ation, refer to Chapter 4, Operating Basics . Slow performance The files on the hard disk drive may be fragmented - in this instance you should run the disk Defragmentation utili ty to check the condition of your files and the hard disk drive.
User ’s Manual 8-10 T roubleshooting Memory Cards: SD/SDHC/SDXC Card, Mul tiMediaCard For further information, please refer to Chapter 3, Hardware, Utilities and Options .
User ’s Manual 8-1 1 T roubleshooting Pointing device If you are using a USB mouse, you should also refer to both the USB device section in this chapter , and the documentation supplied with your mouse. T ouch Pad Problem Procedure The T ouch Pad does not work.
User ’s Manual 8-12 T roubleshooting USB mouse The reaction of T ouch pad is either too sensitive or not sensitive enough. Adjust the touch Sensitivity . 1. Click Start -> Control Panel -> Hardware and Sound -> M ouse . 2. Within the Mouse Prope rties window , click the Advanced ta b.
User ’s Manual 8-13 T roubleshooting USB device In addition to the information in this section, p lease also refer to the documentation supplied with yo ur USB device. The on-screen pointer moves too fast or too slow In this instance, you should initiall y try changing the speed setting within th e Mouse Control utility .
User ’s Manual 8-14 T roubleshooting Additional memory module Please also refer to Chapte r 3, Hardware, Utilities and Options , for further information on installing and removing memory modu les. Sound system In addition to the information in th is section, please also refer to the documentation supplied with your audio device.
User ’s Manual 8-15 T roubleshooting External monitor Please also refer to Chapter 3, Hardware, Utilities and Options , and to the documentation supplied with your monitor for further information.
User ’s Manual 8-16 T roubleshooting LAN Wireless LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 4, Operating Basics . Bluetooth For further information on Bluetooth wire less communication, please refer to Chapter 4, Ope rating Basics .
User ’s Manual 8-17 T roubleshooting Recovery Media T OSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to cont act T OSHIBA for additional techni cal assistance.
User ’s Manual 8-18 T roubleshooting Where t o writ e If you are still unable to solve the prob lem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed below: Outside of Europe In Europe Australia TOSHIBA Australia Pty .
User ’s Manual A-1 Appendix A S pecifications This appendix summarizes the computer ’s technical specifications. Physical Dimensions Refer to User Informati on Guide about Size.
User ’s Manual B-1 Appendix B Display Controller and V ideo mode Display controller The display controller in terprets software commands into hardware commands that turn particular parts on the screen on or of f.
User ’s Manual C-1 Appendix C Information for Wireless Devices Wireless LAN Interoperab ility The Wireless LAN is compatible wit h other LAN systems Direct Sequence S pread S pectrum (DSSS) /Orthogonal Frequency Division Multiplexing (OFDM) radio technology , and is compliant to: ■ The IEEE 802.
User ’s Manual C-2 Information for Wireless Devices CAUTION about Wireless Devices Wireless Devices and your health Wireless products, like other radio devices, emit radio frequency electromagnetic energy .
User ’s Manual C-3 Information for Wireless Devices Radio Regulatory Information The Wireless device is must be installed and used in strict accordance with the manufacturer ’s instructions as descr ibed in the user do cumentation that comes with the product.
User ’s Manual C-4 Information for Wireless Devices Restrictions for Use of 5470-5725MHz Frequencies in Europe T o remain in conformance with European spectrum usage laws for Wireless LAN operati on, the above 2. 4GHz and 5GHz chann el limitations apply for outdoor usage.
User ’s Manual C-5 Information for Wireless Devices Canada - Industry Cana da (IC) This device complies with RSS 210 of Industry Canada. Operation is subject to the following two condi tions: (1) th.
User ’s Manual C-6 Information for Wireless Devices Ta i w a n Using this equip ment in J ap an In Japan, the frequency bandwidth of 2,400MHz to 2,483.
User ’s Manual C-7 Information for Wireless Devices 2. Indication for Wireless LAN The indication shown below appe ars on this equipment. (1) 2.4 : This equipment uses a frequency of 2.4GHz. (2) D S : This equipment uses DS-SS modulation. (3) OF : This equipment uses OFDM modulati on.
User ’s Manual C-8 Information for Wireless Devices Device Authorization This device obtains the T echnical Re gulation Conformity Certificati on and it belongs to the device class of radio equipment of low-power data communication system radio station st ipulated in the T elecommunications Business Law of Japan.
User ’s Manual C-9 Information for Wireless Devices As of Oct. 2010 ■ Available channel of Peer-to-peer connection by ad-hoc mode is Ch1- Ch1 1. ■ Connection with an access point by the Infrastructure mod e is Ch1- Ch13.
User ’s Manual C-10 Information for Wireless Devices Approved Countries/Regio ns for the Realtek ® RTL8188CE W ireless LAN 802.1 1n PCI- E NIC b/g/n W ireless LAN This equipment is approved to the r adio standard by the countries/regions in the following table.
User ’s Manual C-1 1 Information for Wireless Devices Approved Countries/Regio ns for the Broadco m ® 802.1 1n Network Adapter b/g/n(b/g) W ire less LAN an d Bluetooth This equipment is approved to the r adio standard by the countries/regions in the following table.
User ’s Manual C-12 Information for Wireless Devices Approved Countries/Regions fo r the Atheros AR9002WB-1 NG Wireless Netw ork Adapter b/g/n (b/ g) Wireless LAN and Bluetooth This equipment is approved to the r adio standard by the countries/regions in the following table.
User ’s Manual C-13 Information for Wireless Devices Latvia Lebanon Leso tho Liberia Liechtenstein Lithuania Lu xembourg L ybia Madagascar Malawi M alaysia Malta Mauritius Mexico Monaco Montenegro M.
User ’s Manual D-1 Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Certification agencies Length: Minimum 1.
User ’s Manual D-2 AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV -F .
User ’s Manual E-1 Appendix E Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. Non-applicable Icons Certain computer chassis are designed to accommodate all p ossible configurations for an entire product se ries.
User ’s Manual E-2 Legal Footnotes ■ use of computer at temperatures out side the range of 5°C to 30°C (41°F to 86°F) or >25°C (77°F) at hi gh altitude (all temperature reference s are approximate and may vary depending on the specific computer model - please refer to you r computer documentation or visit the T oshiba website at www .
User ’s Manual E-3 Legal Footnotes Battery Life Battery life may vary considerably depend ing on product model, configuration, applications, power ma nagement settings a nd features utilized, as well as the natural perf ormance variations produced by the design of indi vidual compone nts.
User ’s Manual E-4 Legal Footnotes Wireless LAN The transmission speed over th e wireless LAN and the distance over which wireless LAN can re ach may vary de pending on surro unding electromagnetic environment, obstacles, access po int design and configuration, and client design and software/hardware configurations.
User ’s Manual Glossa ry-1 Glossary The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference. Abbreviations AC: Alternating current ACPI: Advanced .
User ’s Manual Glossa ry-2 Glossary HDD: hard disk drive HDMI: High-Definition Multimedia Interface IDE: integr ated dri ve elect ronics IEEE: Institute of Electrical and Electronics Engineers I/O: .
User ’s Manual Index-1 Index A AC adaptor 3-3 DC IN 19V jack 2-4 additional 3-24 connecting 1-4 ASCII characters 5-5 B Battery charging 6-5 extending life 6-7 monitoring capa city 6-6 real time cloc.
Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D User ’s Manual Index-2 G Graphics controller 3-5 H HW Setup Boot priority 7-3 LAN 7-5 SATA 7-5 USB 7-6 accessing 7-1 display 7-3 general 7-1.
Satellite C660/C665/C660D/C665D/Satellite Pro C660/C660 D User ’s Manual Index-3 DVD Super Multi drive 8-9 Dual Pointing device 8-11 External monitor 8-15 Hard disk drive 8-8 Hardware and system che.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba C665 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba C665 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba C665 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba C665 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba C665 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba C665 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba C665 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba C665. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba C665 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
