Benutzeranleitung / Produktwartung 50L2400U des Produzenten Toshiba
Zur Seite of 111
TOSHIBA Leading Innovation Integrated High Definition LED Television User's Guide: 32L2400U 40L2400U 50L2400U If you need assistance: Toshiba's Support Web site support.toshiba.corn For more information, see "Troubleshooting" on page 97 in this guide.
2 Dear Customer, Thank you for purchasing this Toshiba LED TV. This document will help you use the many exciting features of your new LED TV. Before operating your LED TV, carefully read this document completely. Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS TOSHIBA CARES * Manufacturers, retailers and the rest of the consumer electronics industry are committed to maki ng home entertai nment safe and et-ij.
4 Important SafetyInstructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
5 24) When selecting a location for the TV, • NEVER allow any part of the TV to hang over the edge of the supporting furniture, • NEVER place the TV on tall furniture (for example, entertainment c.
6 Studies indicate that plastics may weaken and crack over time from the combined effects of chemical agents and mechanical stress (such as the weight of the TV). Failure to follow these instructions could result in serious injury and!or permanent damage to "FVand 'rv pedestal.
7 7) VESAMounting Pattern TVSize Hole Pattern (HxV) Screw Size 32" 200mm x 200mm M6 40" 2OOmm x 2OOmm M6 50" 4OOmm x 2OOmm M8 Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a fiat, cushioned surface such as a quilt or blanket.
8 FCC Declaration of Conformity ComplianceStatement (Part 15): Toshiba 32L2400U, 40L2400U, 50L2400U Television models comply with Part 15 of the FCC Rules.
9 Trademark Information ColorStream, ColorMaster, DynaLight, GameTimer, Native Mode, Stable Sound, Surflock, TosLink, and TheaterWide are trademarks or registered trademarks of Toshiba America Information Systems, Inc. Blu-ray Disc TM, Blu-ray TM , and the Iogos are trademarks of the Blu-ray DiscAssociation.
Contents Chapterl:lntroduction ............................................................. 16 Features .................................................................. 17 Overview of installation, setup, and use ................... 18 TVfront and side panel controls and connections .
c°.t°.ts 11 Connecting an HDMI ® or DVI device to the HDMl®input ...................................................... 27 HDMI ® CECconnection ........................................... 29 Connecting a digital audio system .....................
2 Contents Tuning to the next programmed channel ............ 56 Tuning to a specific channel (programmed or unprogrammed) ............... 56 Switching between two channels using Channel Return ........................................... 57 Switching between two channels using Surf Lock TM .
c°.t°.ts 13 Using the Dolby ® Digital Dynamic Range Control feature ......................................... 71 Selecting the PIN code .......................................... 72 Enter a new PIN code ....................................... 72 Forgotten PIN code .
4 Contents Chapter 7: Using theTV's Advanced Features ......................... 93 Using the advanced picture settings ........................ 93 ColorMaster TM ................................................... 93 Base Color Adjustment .......
c°.t°.ts 15 HDMl®input ..................................................... 105 Dimensions (with stand) ....................................... 105 Weight / mass (with stand) .............................. 105 Operating conditions ................
Chapter1 Introduction Safety icons This manual contains sat_ty instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data.
Introduction 17 Features Features The following are just a few of the many exciting features of your new Toshiba wide screen, integrated HD LED TV: o,*.
8 Introduction Ovelwi_" of instulluO_)n, setup, and use o:. ENERGY STAR _' qualified Overview of installation, setup, and use Follow these steps to set up your TV and begin using its many exciting features. 1 Carefully read the important safety, installation, care, and service information.
Introduction 19 TVf_3nt cmdsidepcmel eonnv/s cmd connections 10 Program channels into the TV's channel memory, see "Auto Tuning" on page 44 11 For details on using the TV's feature.
0 Introduction TVbackpcmelconnectio_s cannot turn offthe TV, press and hold the POWER button on the TV control panel for a few seconds to reset the TV. 4 •/•/+/-- -- Adjust the volume level, change the channel, or change the input or source you are viewing, depending on the mode, which is selected by the CH/INPUT button.
Introduction 21 TYbaclcganel connections 1 ANT/CABLE--Antenna input that supports analog (NTSC) and digital (ATSC) off-air antenna signals and analog and digital cable TV (QAM) signals.
Chapter2 Connecting Your TV Overview of cable types Before purchasing cables, know the connector types your devices require. You can purchase cables from most stores that sell audio/ video devices.
Connecting Your TV 9_ (..__t,.J Overview of cable Opes Standard AN cables (red/white/yellow) @ @ (Sample Illustration) Stcmdard A V cables Standard A/V cables (composite video) usually come in sets of three, and connect to video devices with analog audio and composite video output.
4 Connecting YourTV ConnecO_ a VCt_ antenna, cable TV, or camc'olJer NOTE HDMI ® cables provide the best audioand picture quality. Optical audio cable (Sample Illustration) Optical audio cable O.
Connecting Your TV 25 ConnecO_ a V(_, antenna, cable _z, ol, c'amcvldel" NOTE The menu setting may need to bechanged in order to watch the shared input between composite andcomponent video. Composite and component video cannot beused simultaneously.
6 Connecting YourTV Connecting a Bht-rco 'a_I / D VD player, satellite receiver with ColorStream_ oi" VCR Connecting a Blu-ray TM / DVD player, satellite receiver with ColorStream TM or VCR .
Connecting Your TV 27 Connec'n_ an HDMI(Rj: or D VI device to the !_)M!(R: it/p/It NOTE When you use ColorStream TM HD or Video, switch AVinput mode appropriately. To view antenna or Cable channels: Select the ANT/CABLE video input source on the TV.
8 Connecting YourTV Connecting an HD3/!/:RJ: o1" D VI device to the//DM!:R: in!_ tt page 106. Supported Audio format: Linear PCM, sampling rate 32/44.
Connecting Your TV 29 //DM!_R: CEC connecfion TV back panel II HDMI IN 2 (Sample Illustration) 32/40/50L2400 U D VI connections NOTE To ensure that the HDMI ® or DVI device is reset properly: • :,, When turning onyour electronic components, turn onthe TV first,andthen the HDMI ® or UVl device.
Connecting YourTV HDM!:RJ: CE ( 7 connection Audio Receiver Playback device (flONI '_ CEC OPO PtayeL etc,) Piayback device (flOMI '_ CEC OVOPlayer, etc,) _-_ ] (Sample Illustration) 32/40/50.
Connecting Your TV 31 Connecting a digital audio system The TV's Digital Audio Out terminal outputs a Dolby@ Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby@ Digital decoder or other external audio system with optical audio input.
2 Connecting YourTV Connec'n_ a computer Connecting a computer With HDMP connection, you can view your computer's display on the TV and hear the sound from the TV's speakers. Connection to the TV's HDIVII ® terminal When connecting a computer with a DVI terminal, use an HDMI :_- to-DVI adapter cable and analog audio cables.
Chapter 3 Using the Remote Control Installing batteries To install batteries • 1 Remove the battery cover from the back of the remote control. Squeeze tab and lift cover (Sctmple Illustrcttion) Removing the remote back cover 2 Insert two AAA batteries, corresponding to the (+) and (-) markings on the battery compartment.
4 Using the Remote Control Remote control effective ra_qe NOTE o:÷ Be sure to use AAA size batteries. o:÷ Dispose of batteries in a designated disposal area. o:* Always considerthe environment when disposing of batteries. Always follow applicable laws andregulations.
Using the Remote Control 16.4 ft (5m) (Sctmple Illustrcttion) 40/50L2400U-Remote cont1_ol e[[octive rcmge.
6 Using the Remote Control Learning about the remote control Learning about the remote control The buttons used for operating the TV are described below. For the HDMI _ CEC remote control functions, see "HDMI<R> CEC playback device Blu-raySV/DVD player, etc.
Using the Remote Control Q7 Learni_ about the remote control U! NOTE The errormessage "NOT AVAILABLE" may appear if you press a button for afunction that is not available. 1 The POWER button turns the TV On/Off. When the TV is off, the power LED indicator on the TV front glows red.
8 Using the Remote Control Learni_q about the remote control 17 The CH RTN button returns to the last viewed channel or source, see "Switching between two channels using Channel Return" on page 57 18 The Arrow buttons (A/T/41/I_) select or adjust programzning menus when a menu is on-screen.
Chapter4 Menu Layout and Navigation Main menu layout The tables below and on the next pages provide a quick overview of your TV's menu system. To open the menus (illustrated below), press MENU on the remote control.
0 Menu Layout and Navigation Main menu layout Icon Item Option Sound Balance Adjusts Balance Bass Adjusts Bass Treble Adjusts Treble DTS TruSurround On / Off Sound Mode Standard/Music/Movie/ClearVoice.
Menu Layout and Navigation 41 Navigati_ the menu system Icon Item Option Get Help System Information Opens the System Information screen Auto Demo Opens Auto Demo menu NOTE Only available if the TVis set toStore mode. Navigating themenu system You can use the buttons on the remote control to access and navigate your TV's on-screen menu system.
Chapter5 Setting up your TV Initial Setup When you first turn on or reset the TV, the Initial Setup window will appear. 1 In the Menu Language field, press the 41/_ (arrow) buttons to select your preferred language. 2 Press the A/• (arrow) buttons to select Time Zone.
Setting upyourTV 43 Installation setup selection Installation setup selection Menu language You can choose from three different menu language settings (English, Francais, and Espafiol) for the on-screen display oflnenus and messages. To select the menu language: 1 Press the MENU button and open the Installation menu, then highlight Menu Language.
4 Setting upyour TV Auto Tuni_ 3 Open the Channel Tuning menu, highlight ANT/CABLE In, and then press the ENTER button. (Sample hm_tge) Channel tuning menu - Input configuration selection 4 Press the A/T (arrow) buttons to select the input source (Cable or Antenna), and then press the ENTER button to save your new settings.
Setting upyourTV 45 To program channels automatically: 1 Configure the antenna input source, if you have not already done so, see "ANT/CABLE IN" on page 43. 2 Press the MENU button and open the Installation menu. 3 Highlight Channel Tuning, and then press the ENTER button.
Setting upyour TV Setti_q channel skip Manual Tuning After storing channels in memory, you can manually enter channels if the physical channel is known. 1 Press the MENU button and open the Installation menu. 2 Highlight Channel Tuning and then press the ENTER button.
Setting up your TV 47 Setti_ the time zone To add a channel to the channel memory: o:* Highlight the checked box next to the channel number you wish to add, and then press the ENTER button to remove the check. NOTE You can also blockspecific channels so that theycannot betuned until you unlock them.
Z_ Setting upyour TV Vic_vi_qthe system stares To set the Daylight Saving Time stares: 1 In the Inst'_ation menu, highlight Dayfight Sa_4ng Time, and press the ENTER button. 2 Press the A/T (arrow) buttons to select On or Off, and then press the ENTER button.
Chapter6 Setting up your TV Selecting thevideoinput source To select the video input source to view: 1 Press the INPUT button on the remote control or TV control panel. 2 Do one of the following: o:* Press 0-3. Repeatedly press the • / • (arrow) buttons on the remote control, and then press the ENTER button to change the input setting.
0 Setting upyourTV Selecti_q the video input source (Sample Image) I1712ut Selectiol_ ,scl"eel_ NOTE o:. You can label the video input sources according to the specific devices you have connected.
Setting up your TV 51 Labeli_ the video input sources NOTE o:÷ When selecting input sources using the CH A/v(arrow) buttons, you will need to press the ENTER button to actually select a particular device fromthe pop=up window or wait 5 seconds after highlighting desired input.
2 Setting upyourTV Tuni_ channds usi¢_ the ('hannd Browser To save the new input labels, highlight Done, and then press the ENTER button. To revert to the factory default labels, highlight Reset and press the ENTER button.
Setting upyour TV _ Favorites browser _,lkl Favorites browser The Favorites Browser allows you to quickly set up a favorite channels/inputs list that is integrated into the Channel Browser. To add a favorite channel/input: 1 Tune to the channel or input.
4 Setting up your TV Favorites browser To save the new entries, highlight Done, and then press the ENTER button. To return to factory defaults, highlight Reset, and then press the ENTER button. To open the Channel Browser: o,** Press BACK CB or NEXT CB arrow buttons on the remote control.
Setting upyourTV 55 Favorites browser To toggle among the available lists: After opening the Channel Browser, press the • / • (arrow) buttons to toggle through the History, ANT/CABLE, Inputs, Favorites, or HDMI CEC options. NOTE o:. The Channel Browser opens in History Listby default.
6 Setting up your TV Favorites browser Adding and clearing channels and inputs in the History List As a channel or input is tuned, the Channel Browser adds it to the History List and displays it on the right side of the Channel Browser. Previously tuned channels/inputs are shifted to the left, eventually moving offthe left side.
Setting upyourTV 57 Favorites browser NOTE If a digital channel is not programmed, either through the automatic channel scan orthe Channel addfunction, see "Auto Tuning" on page 44, you will have to tune the RFchannel using the Channel Numbers and the (Basil 100) button onthe remote control.
8 Setting up your TV 5_lec_ the picture size Selecting thepicture size You can view many program formats in several picture sizes-- Native, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3, Normal, and Dot by Dot. NOTE The picture sizeillustrations areexamples only.
Setting upyourTV 59 Selectl_ the picmre size Full The Full setting is for viewing in the 16:9 (480i, 480p) source programs. If receiving a squeezed 4:3 format program, the picture is stretched horizontally to fill the width of the screen but not stretched vertically.
0 Setting up your TV Selecting the uemre size The picture's top and bottom edges may be hidden*. TheaterWide 3 This setting is for viewing letter box programs with subtitles. Native (Sample Illustratiol_)Picture size - Theater Wide 3, letter box with subtitles The picture's top and bottom edges are hidden*.
Setting up your TV 61 Selectl_ tfle picmre size 4:3 (Sample Illustration) Picture size - 4:3 Some program formats will display with sidebars and/or bars at the top and bottom. Normal This setting is for viewing VGA, SVGA, XGA, WXGA, and SXGA sources. .
2 Setting upyourTV Usi_q the Auto A_pectJeamre Scrolling the TheaterWide TM picture (TheaterWide 2 and 3 only) You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input. To set the scroll settings: 1 In the Picture Menu, highlight Display Settings, and then press the ENTER button.
Setting up your TV 63 Usi_ the FREEZEJeature Aspect Ratio of Signal Automatic Aspect Size (automatically selected when Auto Soume Aspect is On) 4:3 Normal 4:3 4:3 Letter Box TheaterWide 2 16:9 Full Fu.
4 Setting upyourTV A djusti_q the picmre NOTE Using the FREEZE function for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States andother countries, andmay subject you to civil andcriminal liability.
Setting up your TV j_ Adjusfi_ the picmre k,!_,,J To select the picture mode using the menu system: 1 Press the MENU button and open the Picture menu. 2 Highlight Picture Mode, and then press the ENTER button.
6 Setting upyourTV Using closed captions' To reset to the factory defaults: 1 Press the MENU button. 2 Select Picture I_ Reset. 3 Press the ENTER button. A confirmation screen appears. 4 Press the •/• (arrow) buttons to select Yes, and then press ENTER.
Setting up your TV 67 Usi_ closed captions NOTE If the program or video you selected is not closed captioned, no captions will display onscreen. To view text, highlight T1, T2, T3, or T4. (Sample Illustmtiol_) Caprioles - text NOTE If text is not available in your area, a black rectangle may appear on screen.
8 Setting upyourTV Adjusti_q the audio 2 Highlight Digital CC Settings, and then press the ENTER button. 3 Press the •/• (arrow) buttons to highlight the characteristic you wish to change, and then press the -_/_ (arrow) buttons to select the format for that characteristic.
Setting upyourTV 69 Adjus'ti_ the audio NOTE If you modify items in the Sound menu while Muteis active, Muteis cancelled. Using the Digital Audio Selection You can use the Digital Audio Selection to conveniently switch between audio tracks on a digital channel (for those channels that have multiple audio tracks).
0 Setting upyourTV Adjusti_q the audio NOTE o:÷ You can typically leave the TV in Stereo mode because it outputs the type of sound beingbroadcast (stereo or monaural).
Setting up your TV 71 Adjus'ti_ the audio DTS TruSurround TM This technology delivers an ilnlnersive virtual surround sound experience over front facing speaker configurations, complete with rich bass, high frequency detail and clear dialog. To turn on DTS TruSurroundT_: 1 Press the MENU button and open the Sound menu.
2 Setting upyourTV Usi_parental controls (for _S'A r_ion) NOTE .:÷ ThisfeatureisavailablewhentheTVistunedtoadigitalRF channel oran HDMP input withthe Dolby ® Digital signal. Selecting the PIN code APIN code is necessary for some menus. NOTE o:- The Parental Control andLocks menu is grayed out if no PINhas been set.
Setting upyourTV 73 Usi_parental controls (_br {_S'A r_on) 4 Press the • / • (arrow) buttons to highlight Enable Rating Blocking, and press ENTER button.
4 Setting upyourTV Usi_parental controls (/br _ZS'A r_ion) 4 Press the • / • (arrow) buttons to highlight Enable Rating Blocking, and press the ENTER button. 5 Press the • / • (arrow) buttons to select On, and then press the ENTER button.
Setting up your TV 75 Usi_parental controls (f!_r _S'A region) Rating system Independent rating system for broadcasters: Rat#Ns." Description and Content themes." TV-MA TV-14 TV-PG Mature Audience Only (This program is specifically designed to be viewed by adults and therefore may beunsuitable for children under 17.
6 Setting upyourTV Usi_parental controls (fbr _ZS'A r_on) Indication other than rating system: TV-NONE TV None MPAA N/A Movie Not Applicable NOT RATE Movie Not Rated (No rating appears) No rating.
Setting up your TV "7"7 Locki_channels II Enter your four-digit PIN code, and then press the ENTER button. If the correct code is entered, the program lock mode is released and the normal picture appears. All locking will be enabled again when you change the channel.
8 Setting up your TV Locki_channels (Sample IllustratiotT) ('hatmel options 2 Press the • / • (arrow) buttons to select a channel in the lock column. 3 Press the ENTER button. PIN code entry will be required to set a locked channel. NOTE Ifthe PIN code has not yetbeen set, awarning message appears.
Setting up your TV 79 Locki_cflannels o*** Set the Input Lock to Off, see "Using the input lock feature" on page 77 NOTE o**÷ A message appears when l0 minutes, 3 minutes, andl minute areremaining.
0 Setting upyourTV Usi_ the M_ia Hayer Using the Media Player Using Media Player with a USB device You can enjoy photo or music content stored on a USB storage device.
Setting up your TV 81 Usi_ the Media Player Auto Start function WhenAuto Start is enabled, you will be asked if you want to start the Media Player when a USB device is inserted. If Auto Start is disabled, you must manually start the Media Player from the menu.
2 Setting upyourTV Usi_ the Media Player gS'ample hmtge) Media Play screen NOTE o+*÷ The viewer will open even iftherearenophoto or music files. o:° While the Media Player is active, the main menus cannot be displayed. Viewing photo files There are three types of view modes: multi view, single view, and slide show.
Setting up your TV _ Usi_ the Media Player !,,l_ 4 Press the ENTER button to view the selected photo in Single View mode. Single view In this view mode, only files located in the selected directory will be displayed. This view allows you to change the photo content manually.
4 Setting upyourTV Usi_Whe M_ia Hayer Playing music files You can listen to music from a list of available files. When listening to music files, you can select music lists, play, pause, stop, skip, repeat play, and adjust sound settings.
Setting up your TV 85 Usi_ the Media Player NOTE During playback, you can adjust the Sound menu functions fromthe Quick Menu. To set the repeat mode: 1 Press the MENU button to open the Quick Menu. 2 Press the •/• (arrow) buttons to select Repeat.
6 Setting upyourTV Settl_q tke sleep timer .1. Numerical (0-9), Uppercase (A-Z), lowercase (a-z), Chinese .1. Increasing order New-From new to old according to the date and time when the picture was taken. Old-From old to new according to the date and time when the picture was taken.
Setting upyour TV NoSignal Power Down The TV will automatically turn itself off after 15 minutes when no signal is detected. You can change the setting to Offfor the following purposes: o.** Low signal strength of analog channel (no signal detection) o.
8 Setting upyourTV Us_,g HDMIq _ ( _( Button." Description." FF Fast forward REW Rewind/reverse A/•/41/I,,- Navigates menu options ENTER Enters menu options EXIT Return to the previous menu NOTE These functions depend onthe devices connected.
Setting upyour TV • 89 Us_,q HDMIq _ ( 'E( NOTE These functions depend on the devices thatare connected.The HDMI ® CEC Player Controlitem will begrayed out in the following conditions: 4 A non-HDMP input is currently selected. • :- The Enable HDIVII CEC item is setto Off.
0 Setting upyourTV Using the HDM[LR) setti_qsJeamre Item." Description." Initial Speaker Setting From this item, you can setyour audio output preference to the TV speakers or the audioreceiver speakers. When this itemis set to Receiver, the TV remote can be used to adjust or mute the volume of the audio.
Setting upyour TV 91 Displayi_ TVstatus inJormation Mode Auto(default) Full Limited Press the •/• (arrow) buttons to select Auto, Full, or Limited, and then press the ENTER button. Description Adjusts RGB full range signal automatically. ROB in!_u!_s!gna!_o)S_a_ed !no_ang, e from 0 to 255.
2 Setting upyourTV { ?nderstandi_ the last mode memoryJeamre .5. Digital signal strength indicator (bar graph in lower right corner of box; for digital signals only) .5. Stereo, Mono, or SAP audio stares (when in HDMP input mode, Dolby _ Digital, or PCM) .
Chapter 7 Using the TV's Advanced Features Using the advanced picture settings ColoriVlaster TM The ColorMasteW Mfeature allows you to adjust standard colors. 1 From the Picture menu, highlight Advanced Picture Settings, and then press the ENTER button.
4 Using the TV's Advanced Features Usi_q the advanced picmre setti_qs 6 Repeat Steps 3 through 5 to adjust other colors. To reset the adjustments to the factory defaults, select Reset on the screen.
Using the TV's Advanced Features (_ Usi_ the advam'ed picmre settings ,j_.,t DynaLight TM The DynaLighF Mfeature automatically strengthens the black coloring of dark areas in the video according to the level of darkness. 1 From the Picture menu, highlight Advanced Picture Settings, and then press the ENTER button.
Using the TV's Advanced Features Usi_q the advanced picmre setti_qs 1 From the Picture menu, highlight Advanced Picture Settings, and then press the ENTER button. 2 Highlight Noise Reduction and then press the ENTER button. 3 Press the • / • (arrow) buttons to select MPEG NR and then press the ENTER button.
Chapter8 Troubleshooting General troubleshooting Before calling a service technician, review this chapter or visit the Toshiba technical support Web site at support.
8 Troubleshooting Pictureproblems Onscreen Demo Pop-up If your TV is displaying a Delno pop-up screen, reset the Store / Home mode setting to Home. For more information see "Installation setup selection" on page 43 TV will not turn on. Ensure the power cord is plugged in properly, and then press the POWER button.
Troubleshooting 99 5bund problems Noisy picture. If you are watching an analog channel (off-air broadcast or Cable TV), you can set the DNR feature to reduce visible interference in the TV picture, se.
100 Troubleshooting ('hannel tum_problems If you hear no sound, try setting the MTS feature to Stereo mode, see "Selecting stereo/SAP broadcasts" on page 69 If you are not receiving a s.
T, oo ,o, oo,in 101 P{ • • 9 " No HDMIq b ( 'E( operation Closed caption problems If the program or video you have selected is not closed captioned, no captions appear on the screen.If text is not available, a black rectangle may appear.
102 Troubleshooting IJ?he problem persis'ts after tryi_ the solutions HDMI ® problems HDMF cables. Ensure that HDMI ® cables with the (N_,r) Logo are used, see "Connecting an HDMI(R)or DVI device to the HDMI(R) input" on page 27 Legacy HDM[ "_ sources.
Appendix A Specifications NOTE o,*÷ These models comply withthe specifications listed below. o;- Designs andspecifications aresubject to change without notice. o,*-These models may not becompatible withfeatures and/or specifications thatmay beadded in the future.
104 Specilications PowcF SOZIFd'C Power source 120V AC, 60 Hz Power maximum current 32L2400U 0.9A 40L2400U 1.1 A 50L2400U 1.4A Power consumption 32L2400U 0.3 W in Standby mode 40L2400U 0.3 W in Standby mode 50L2400U 0.3 W in Standby mode Audio power 32L2400U 6_ 7W 40L2400U 6f_ 7W 50L2400U 6__) 7W Speaker type 32L2400U Two 5.
Specifications 105 Dimensions (with stand) ColorStream TM (component video) HD input Video Y: IV(p-p), 75 ohm PR: 0.7 V(p-p), 75 ohm PB: 0.7 V(p-p), 75 ohm Suggested formats: 1080i, 720p, 480p, 480i A.
106 Specifications Supplied accessories ]Humidity 120- 80 % (no moisture condensation) ] Supplied accessories o.** Remote control with two size "AAA" batteries o,** Resource Guide o!.
Appendix B Index A Acceptable signal formats for HDMI@ HDMI@ signal formats 106 Additional Safety Precautions Installation, Care, and Service Choosing a location for your LED TV To Display your LED TV.
108 Displaying ratings 72 C Channel Browser Elements 54 F Tuning channels 52 Channels Locking channels77 Cinema Mode Noise Reduction MPEG NR DNR 95 Color Temperature Static Gamma DynaLightTM F Dynamic.
'""=' 109 Safety icons HDMI® 1(or2) RGB Range 89 Features Overview of installation, setup, and P use 16 Panel lockfeature / using 79 Parental controls Last mode memory feature92 u.
110 S Safety icons 16 Safety Precautions WARNING CHILD SAFETY Important Safety Instructions 2, 4 Scrolling the TheaterWideTM picture (TheaterWide 2 and3 only) Using the Auto Aspect feature Usingthe 4:.
Switching between two channels using Channel Return Switching between two channels using SurfLock TM Selecting the picture size 56 TV frontandside panel controls and connections TV back panel connecti.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba 50L2400U (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba 50L2400U noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba 50L2400U - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba 50L2400U reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba 50L2400U erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba 50L2400U besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba 50L2400U verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba 50L2400U. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba 50L2400U gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
