Benutzeranleitung / Produktwartung 47TL515U des Produzenten Toshiba
Zur Seite of 102
32TL515U 42TL515U 47TL515U 55TL515U Integrated High Definition LCD Television © 2011 TOSHIBA CORPORATION All Rights Reserved Owner’s Record The model number and serial number are on the back and side of your TV. Record these numbers in the spaces below.
2 Dear Customer, Thank you for pur c hasing this Toshiba LCD TV. This manual will help you use the many exciting fe atures of your new LCD TV. Before operatin g your LCD TV, please rea d this manual completel y , and keep it nearby for future referen ce.
3 Important Safety Instructions 1) Rea d these instructions. 2) Keep these instruct ions. 3) Hee d all warnin g s. 4) Follow all ins tructions. 5) Do not use this ap paratus near water. 6) Clean only with d ry cloth. 7) Do not block any ve ntilation openin g s.
4 • Ensure that the TV is not hanging over the edge of the supporting furniture. • Never place the TV o n tall furniture (fo r example, cupboards or bookcases) wi thout anchoring both the furniture and the TV to a s uitable support • Never stan d the TV on cloth or other material placed between the TV and supporting furniture.
5 volatile compounds such as insecticide on the TV surface. Such products may damage or discolor the TV. 38) Never hit, press, or place anything on the back cover. These actions will damage internal parts. 39) Never spill liquids o r push objec ts of any kind in to the TV cabinet slo ts.
6 Removing the Pedestal Stand 1) Carefully lay the front of th e unit face down on a flat, cushioned su rface such as a quilt or blanket. Leave the stand protrudin g over the edge of the surface. Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.
7 • For optimal 3D effect an d to avoi d eye fati g ue it is important that you properl y select your viewin g position. The best viewing positi on is at the indicated viewi ng distance with yo ur eyes a t the same leve l as the center of the display as shown be low.
8 Canada - Industry Canada Statement This device complies with RSS-210. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept an y interference received, including interference th at may cause undesired operation of the device.
9 Trademark Information • Manufactured under license from Dolby Laboratories. Dolby and the do uble-D symbol are regis tered trademarks of Dolby Laboratories. • Audyssey Dynamic Volume ® controls volume levels to eliminate loud spikes and raise soft dialog for more enjoyable television and movie viewing.
10 Contents Impo r tant Safety Inst r uctions . . . . . . . . . . . . . . . . . . . . . . 3 Installation, Ca r e, and Se r vice . . . . . . . . . . . . . . . . . . . . . 3 Choosing a location fo r you r LCD TV . . . . . . . . . . . . . . . . . 5 Safety P r ecautions fo r 3D glas ses .
11 White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Resetting to the factory default . . . . . . . . . . . . . . . . . . 59 Locking the picture settings . . . . . . . . . . . . . . . . . . . . . . . 59 Adjusting the audio .
12 Chapter 1: Introduction Features • Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in mo st cases). • 1080p output resolution. • Four HDMI ® digital, High-Definition Multi media Interfaces with 1080p input support ( - p.
13 Chapter 1: Introduction Front panel control Examples show Model 32TL515U. Back panel connections For explanations of cable type s and connections, see p. 15–23. TV f r ont Bri g htness S ensor This sensor will detect the ambient light conditions to optimize the backli ghting levels ( - p.
14 Chapter 1: Introduction Bundling the cables Install the cable clam ps and bundle the cables in them. Stand type Wall Mount type Cable Clamps Cable Clamps.
15 Chapter 2: Connecting your TV Overview of cable types Before purchasing cables, know the connector types your devices require. You can purchase cables from most stores that sell audio/video devices. Coaxial cable (F-type) (F-type) Connects your antenna, cable TV servi ce, or cable converter box to your TV.
16 Chapter 2: Connecting your TV Connecting to a Satellite dish, an Antenna, or Cable TV IN OUT CH 3 CH 4 VIDEO OUT AUDIO OUT COMPONENT VIDEO L R S atellite IN P B P R Y TV back panel VHF/UHF Antenna .
17 Chapter 2: Connecting your TV Connecting an HDMI ® or DVI device to the HDMI input HDMI OUT DVI /HDCP OUT AUDIO R L OUT TV back panel HDMI device DVI device HDMI cable Analog audio ca ble HDMI-to-.
18 Chapter 2: Connecting your TV Connecting a VCR or DVD player with ColorStream ® (component video) VIDEO AUDIO LR COMPONENT VIDEO P B P R Y AUDIO OUT LR R W Y G B R W Y R W R B R W Y R W R GB G W T.
19 Chapter 2: Connecting your TV Connecting remote IR devices Using the IR OUT terminal You can use the TV’s IR OUT terminal to remotely operate many infrared remote-controlled devices enclosed in an entertainment center or similar cabinet. You will need: • Dual-wand IR blaster ca ble ( - p.
20 Chapter 2: Connecting your TV Using the IR IN terminal For additional control opti ons for your home theater system, you can connect an IR receiver/repeater control system (not in cluded) to the TV’s IR IN termina l. You will need: •I R c a b l e To set the IR IN mode: 1 > S ettin g s > PREFER ENCE S > IR Control .
21 Chapter 2: Connecting your TV Using the TV remote and HDMI ® CEC Control to control other devices To control the basic function s of connected audio/video d evices using th e TV’s remote contro l, co nnect an HD MI ® CEC compatible audio receiver or playback device.
22 Chapter 2: Connecting your TV Connecting a PC You can view your PC’s display on the TV and hear the sound from the TV’s speakers. Connecting to the TV’s PC IN terminal You will need: • A nalog RGB (15-pin) computer cable •A n a l o g a u d i o c a b l e Before using the PC: See “Using yo ur PC with t he TV” ( - p.
23 Chapter 2: Connecting your TV Connecting to a home network The LAN port allows your Toshib a TV to connect to your home network. You can use this home net work to access pho tos, movies, and music files that are stored on a DLNA CERTIFIED ™ Server and play th em on you r TV.
24 Chapter 3: Using the remote control Controlling other devices The TV’s remote control can operate other devices such as cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box). Toshiba devices: The remote is programmed to operate a variety of devices ( - p.
25 Chapter 3: Using the remote control Learning about the Remote Control Only the buttons used to operate the TV are described in thi s section. For the HDMI ® CEC Control functions, see “Using HDMI ® CEC Control” ( - p. 46). For a complete list of the remote’s functions, see “Remote control fu nctional key chart” ( - p.
26 Chapter 4: Initial Setup and Menu Initial Setup When you first tu rn on or reset the TV, the In itial Setup window will appear. Note: • You can stop Initial Setup by pressing . However, if you do not finish Initial Setup, the Initial Setup scree n will appear every time you turn on your TV.
27 Chapter 4: Initial Setup and M enu 6 Start Scan Note: If you want to stop scanning, press while scanning. • After scanning is complete, a channel list screen (such as the one below) will appear. Press or . Note: Encrypted channels cannot be registered though these are displayed in the above list.
28 Chapter 4: Initial Setup and M enu Main menu layout To open the main menus (il lustrated below), press on the remote control or TV control panel. 1st Laye r 2nd Laye r 3 r d Laye r Page Network NET.
29 Chapter 4: Initial Setup and M enu Quick menu Quick menu helps you access some options more quickly. Press to display the Quick menu an d press B or b to select an opt ion.
30 Chapter 5: Setting up your TV How to navigate the menu: > Settings > Main menu > Submenu > Changing Initial settings From Quick Setup: 1 > S ettin g s > S ETUP > Quick S etup > . 2 A confirmation message appears. Press C or c to select Yes .
31 Chapter 5: Setting up your TV 1 > S ettin g s > S ETUP > Auto Tunin g > . A confirmation screen appears. 2 Press to start Auto Tu ning or to abort. The TV cycles through all th e channels and stores all active channels in memory. To view the programmed channels, press or .
32 Chapter 5: Setting up your TV Labeling channels You can label analog TV channels. 1 > S ettin g s > S ETUP > TV S ettin g s > . 2 Press B or b to select Channel Options . Press . The list of channels appears. 3 Press B or b to select a channel to label.
33 Chapter 5: Setting up your TV Setting the Auto Input feature You can change TV inputs using the MODE S ELECT buttons on the remote con trol: TV , CABLE/ S AT , BD / DVD , AUX .
34 Chapter 6: Basic features Viewing 3D images Before using the 3D function, note th e following. In addition to compatible 3D glasses, viewing 3D programming requires the following (which are not included): • C ompatible 3D p layback device or 3D sou rce.
35 Chapter 6: Basic features Using 3D functions Incoming video signals can either be in 2D or 3D format. A 2D signal can be vi ewed in either 2D or 3D, and 3D can be viewed in either 2D or 3D. If the TV can detect the fact that a signal is 3D, it can change to 3D mode automatic ally – see “3D Auto Start” ( - p.
36 Chapter 6: Basic features To switch to 3D mode: •S e t 3D Auto S tart to 3D . • P ress and select 3D while viewing 2D mode or Native mode. * Correct 3D im age To select 3D format from the Quick menu in 3D mode: 1 > 3D S ettin g s > . 2 Press B or b to select 3D Format S elect .
37 Chapter 6: Basic features To switch to Native mo de: • P ress while viewing 3D mode. • Press while viewing 2D to 3D mode. Note: When 3D format signal with 3D Auto Detect Information is received, it is not p ossible to switch to Native. • From the Quick me nu in 2D mode.
38 Chapter 6: Basic features Setting the 3D Lock When this fe ature is set t o On , you must enter 3D PIN code for changing display mode to 3D mode or 2D to 3D mode. 1 > S ettin g s > PREFEREN CE S > 3D S etup > . 2 Press B or b to select 3D S afety S ettin g s .
39 Chapter 6: Basic features Tuning channels Setting the Channel Tuning Mode You can select how tuning is handled for analog and digital channels when the TV is in A ntenna mode. Note: To use this feature, ANT/CABLE In must be set to Antenna ( - p. 30).
40 Chapter 6: Basic features Elements of the Channel Brows er ™ 1 Channels stored in the History List 2 Channel or input that is currently highligh ted in the browser 3 Inputs or channels labels 4 I.
41 Chapter 6: Basic features Using Channel Return You can switch between tw o channels without entering a channel number each time. This feature also works for external inputs. 1 Select the first channel you want to vie w. 2 Select a second channel using the Channel Numb er buttons (and the dash ( ) button if needed).
42 Chapter 6: Basic features Using closed captions To turn o n the cl osed capt ion mo de: 1 > S ETUP > TV S ettin g s > . 2 Press b or B to select Close d Captions S ettin g s . Press . 3 Press b or B to select Close d Captions . 4 Press C or c to select On .
43 Chapter 6: Basic features Setting the PIN code A PIN code is necessary for some menus. Note: The Parental Control and Locks menu is grayed out if no PIN has been set. Entering a new PIN code 1 > S ettin g s > PREFERENCE S > PIN S ettin g > .
44 Chapter 6: Basic features Downloading an additional rating system In the future, an additional rating sy stem may become available for use in selectivel y blocking TV programs and movies. Note: The currently tuned station must be receiving a digital signal before an additional rating system can be downloaded.
45 Chapter 6: Basic features Note: • If you place an “ 5 ” in the box next to “ Rated “None” ”, programs rated “ None ” or “ Not Rated ” will be blocked; Programs that do not provide any rating information will not be blocked.
46 Chapter 6: Basic features Setting a time limit for games You can use the GameTimer ® to set a time limit for playing a video game. When the time expires, the TV locks all external in puts. 1 > S ettin g s > PREFER ENCE S > Parental Control an d Locks > .
47 Chapter 6: Basic features Controlling HDMI ® CEC playback devices With your TV’s remote control, you can control the connected HDMI ® CEC playback device ( DVD player, etc.) you are watching. Availab le remote contro l key func tions: Before using these key fu nctions, set the MODE SELECT switch on th e remote control to TV .
48 Chapter 6: Basic features Adjusting the amplifier’s audio Using the TV’s remote contro l, you can adjust or mute the sound volume of your amplifier. • adjust the volume level. • turns off the so und. Note: This feature is available when Amplifier Control is set to On.
49 Chapter 6: Basic features Using your PC with the TV Adjusting the image If the edges of the pict ure are hidden, readjust Horizontal Position and Vertical Position . If the picture is affected by interference, readjust Clock Phase and S amplin g Clock .
50 Chapter 6: Basic features Setting the sleep timer You can set the TV to turn off after a specific amount of time (maximum = 12 hours). Using the remote control: 1 Press [ 2 Set the time un til the TV turns o ff. • Repeatedly press [ to increase th e time.
51 Chapter 6: Basic features Displaying TV status information To display TV status information: Press . The following informatio n will be displayed (if applicable): • C urrent input ( ANT/CABLE , Vi d eo , etc.) • E ither “CABLE” (for cable TV) or “ANT” (for over- the-air bro adcasts), if AN T/CABLE is the curre nt input.
52 Chapter 7: Picture and sound controls Selecting the picture size You can view many program formats in several picture sizes— Native , 4:3 , Full , TheaterWi d e 1 , TheaterWi d e 2 , TheaterWi d e 3 , Normal , and Dot by Dot . Note: The picture size illustrati ons are examples only.
53 Chapter 7: Picture and sound controls * To view th e hidden ar eas (such as subtitles or captions ), see “Scrolling the pictur e” ( - p. 54). Pictu r e Size Native (fo r 480i (HDMI), 480p (HDM .
54 Chapter 7: Picture and sound controls Scrolling the picture If the edges of the picture ar e hidden, yo u can adj ust the image’s position. Note: • You can adjust the picture position when the picture size is set to TheaterWide 2 or TheaterWide 3 .
55 Chapter 7: Picture and sound controls Adjusting the picture Selecting the picture mode You can select yo ur desired picture settings from th e modes described below. Note: • PC mode is available for HDMI and PC inputs only (not displayed for other input sources).
56 Chapter 7: Picture and sound controls Using the advanced picture settings features Note: Some of the Advanced Picture Settings features will not be available for adjustment when the Picture Mode is set to AutoView . Edge Enhancer The Edge Enhancer feature lets you adjust the levels for your desired picture settings and achieve a sharper picture.
57 Chapter 7: Picture and sound controls ClearScan 240 ™ This feature provides smoother motion and a crisper image. 1 > S ettin g s > PICTURE > A d vance d Picture S ettin g s > . 2 Press B or b to select Clear S can 240 . 3 Press C or c to select On .
58 Chapter 7: Picture and sound controls ColorMaster ™ The ColorMaster ™ feature allows you to adjust standard colors. 1 > S ettin g s > PICTURE > A d vance d Picture S ettin g s > . 2 Press B or b to select Col orMaster , press C or c to select On .
59 Chapter 7: Picture and sound controls Setting Type You can adjust the white balance setting. 1 > S ettin g s > PICTURE > Expert Picture S ettin g s > . 2 Press B or b to select White Balanc e . Press . 3 Press C or c to select 2P Wh ite Bala nce .
60 Chapter 7: Picture and sound controls Using the MTS button If you press when an analog channel is tuned: • T he Analog Audio bar will appear and display Stereo, SAP, Mono as the o ptions. If you press when a digital channel is tuned: • T he Digital Audio bar will appear and offer different audio choices for the digital channel.
61 Chapter 7: Picture and sound controls Using advanced sound features Using surround sound Voice Enhancement and Dy namic Bass Boost help to create a thrilling surrou nd sound experience wit h deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, rich er, and wider.
62 Chapter 8: Advanced features Using your home network • This TV is a DLNA CERTIFIED ™ Player. It can play digital content stored on a DLNA CER TIFIED ™ product with server functions. If you want to use this TV as a DLNA CERTIFIED ™ Player, you will have to configure the network settings on your TV ( - p.
63 Chapter 8: Advanced features Setting up the Network You can select the Network Type. 1 > S ettin g s > PREFERENCE S > Network S etup > . (Another: > Network > Network S etup > .) 2 Press B or b to highlight Network Type . 3 Press C or c to select Wire d or Wireless .
64 Chapter 8: Advanced features Manual Setup 1 > S ettin g s > PREFERENCE S > Network S etup > . 2 Press B or b to select Wireless S etup . Press . 3 Press B or b to select Manual S etup . Press . 4 Press B or b to select Network Name . Press .
65 Chapter 8: Advanced features Advanced Network Setup Note: • When the DHCP function of the rou ter connected to this TV is On, you can set Auto Setu p to On or Off. (Usually set it to On .) • When the DHCP function of the rou ter is Off, set Auto Setup to Off , and manually set the IP Address or DNS Address.
66 Chapter 8: Advanced features Network Connection Test This function checks Internet connectivity. 1 > S ettin g s > PREFER ENCE S > Network S etup > . 2 Press B or b to select Network Connection Test . Press . Note: A message will appear to indicate whether the connection was successful or not.
67 Chapter 8: Advanced features Performing a Software Upgrade TOSHIBA may offer upgrades for th e TV's software in the future. The TV's softwa re is upgraded via Internet connection. Before download ing software: Configure your TV to connect to the Internet.
68 Chapter 8: Advanced features Guided Setup The first time you use Yahoo! TV Widgets this step-b y- step wizard begins with the Welcome Screen. 1 Select Let's g et starte d ! If you select Exi t S etup now, this step will resume the next time you press .
69 Chapter 8: Advanced features • Content that the user may feel is improper or offensive may be included in the contents of YouTube. • We do not assume any responsibility for contents that YouTube offers. • If you have any questions about YouTube contents, please contact YouTube, LLC.
70 Chapter 8: Advanced features To close Yahoo! TV Widgets: Press . Note: • To use Yahoo! TV Widgets you must first complete the “Guided Set up” ( - p. 68). • If 3D signal format with 3D Auto Detect Information is received while using this fe at ure, the screen is closed.
71 Chapter 8: Advanced features Using the Media Player This TV allows you to acce ss photos, movies, and music files stored on a USB device. Moreover, you can also access photos, movies, and m u s i c fi l e s f r o m y o u r T V o r P C b y c o n n e c t i n g th e T V t o your home network.
72 Chapter 8: Advanced features Using Media Player with DL NA CERTIFIED ™ Server You need to configure a home net work before using this feature ( - p. 23). 1 > Settings > APPLICATIONS > Media Play er > . (Another: > Media Pla yer > .
73 Chapter 8: Advanced features To set the repeat mode: 1 Press . The current repeat setting appears. 2 Press C or c to select Off , All , or 1 . 3 Press . The setting is effectiv e until the TV is turned off. To display the file status information: 1 Press Q during p layback .
74 Chapter 8: Advanced features To set the repeat mode: 1 Press . The current repeat setting appears. 2 Press C or c to select Off , All , or 1 . 3 Press . The setting is effectiv e until the TV is turned off. To display the file status information: 1 Press Q during p layback .
75 Chapter 8: Advanced features To set the mode settings: 1 Press to open the Quic k men u while i n Single View mode or Slidesh ow mode. 2 Press B or b to select the item ( S OUND , Interval Time , Repeat , Back g ro un d Musi c , or S peakers ). 3 Press C or c to adjust the setting.
76 Chapter 8: Advanced features Using the Wallpaper feature This feature allows you to d isplay a photo file stored on the TV. • O nly one photo file can be stored on the TV. • T he photo file can be overwritten with a file from an external device (USB, D MS).
77 Chapter 9: Troubleshooting General troubleshooting Before calling a service technician, please check this chapter for a possible cause of the problem and some solutions you can try. Black box onscreen • The clo s ed captio n feat ur e i s s et to o n e of the Text mode s ( T1 , T2 , T3 , o r T4 ).
78 Chapter 9: Troubleshooting Remote control problems • E nsur e the r emote co n t r ol i s s et to the co rr ect device mode ( - p. 88). • Remove all ob s t ru ctio ns betwee n the r emote co n t r ol a n d the TV. • Replace the r emote co n t r ol’ s batte r ie s ( - p.
79 Chapter 9: Troubleshooting – Connect with LAN cables, if possible, and chec k connection stability. – Repeat the wireless networ k setup procedure and check connection stability. The DMS name is not displayed • The LAN cables, if used, ar e not connected properly ( - p.
80 Chapter 9: Troubleshooting LED indications The POWER and Service LED lig hts on the front of the TV indicate the TV’s status , as described below. POWER On/Standby LED •G r e e n The TV is operating properly. • No light The power is off or standby.
81 Chapter 10: Appendix Specifications Note: • This model com plies with th e specificati ons listed below. • Designs and spe cifications are subject to change without notice. • This model may not be comp atible w ith feature s and/ or specification s that may be added in the fu ture.
82 Chapter 10: Appendi x Supplied Accessories • Easy Setup Guide • Pedestal assembly in stallati on manual • Stop/Quick set up guide • Remote control with two “AA” size batteries •M o u n t i n g s c r e w Use this screw to secure the TV.
83 Chapter 10: Appendi x Acceptable signal formats for PC IN, HDMI, and 3D PC IN signal formats Note: • The PC IN on this TV only accepts signal formats which are co mpliant with VESA-DMT as in th e table below.
84 Chapter 10: Appendi x HDMI signal formats Note: • The HDMI inputs on this TV only accept VGA, SVGA, XGA, WX GA, and SXGA signal formats which are compliant with VESA-DMT as in the table below.
85 Chapter 10: Appendi x 3D signal formats* * Some contents may not be supported depe nding on the format of the input source. Resolution Aspect r at io V. F r equency H. F r equ ency Pixel Clock F r equency 3D St r uctu r e 1280 × 720p 16:9 23.98 Hz 17.
86 Chapter 10: Appendi x Remote control functional key chart REMOTE CONTROL KEY Toshiba TV CABLE SAT (satellite) Blu- r ay ™ DVD/ DVD-R VCR Recive r / Amp CD GAME Game --- --- --- --- --- --- --- PO.
87 Chapter 10: Appendi x Note: • “---” = key does not send a signal in that remote control mode. *1 Volume affects the TV by default. When the volume is unl ocked, each device has its own volume if its ID has volume data. The AUDIO modes will have their own volume if volume lock is set on TV , CABLE/SAT, VCR/PVR, or DVD mode.
88 Chapter 10: Appendi x Operating other devices Your TV remote control has one dedic ated TV mode and three programmable multi-brand modes: CABLE/ S AT , BD/DVD , and AUX . Note: To operate a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must program the remote.
89 Chapter 10: Appendi x Searching for a device code If you do not know the devi ce code for a particular device, you can view each ava ilable code for that device mode and sample th e functions to find th e code that operates the target device. 1 Press a mode select bu tton on the remote.
90 Chapter 10: Appendi x Operating the TV with combination buttons You can directly operate the TV power, input switch, picture size switch, and picture mode switch by pressing a combination bu tton while holding do wn a color button.
91 Chapter 10: Appendi x Remote control codes In some cases, you may not be able to operate your device with the TV remote control. Your device may use a code that is not recognized by the TV remote control. If this happens, use the device’s remote control.
92 Chapter 10: Appendi x Blu-ray Disc ™ DVD SCIENTIFIC ATLANTA 0045, 0063 , 0045 SIGNAL 0036 SIGNATURE 0078 SL MARX 0036 STANDARD 003 2 STAR SIGHT 0047 STAR TRAK 0058 STARCOM 0081, 0123 STARGATE 003.
93 Chapter 10: Appendi x DVD Recorders LITEON 1109, 11 18, 1015 MAGNAVOX 1061, 1130, 1117, 1131 , 1158, 1177 , 1178 MARANTZ 1061 , 1093, 1130, 1077 , 1078, 1157 , 1158, 1167 , 1176 MEDION 1015, 10 48 .
94 Chapter 10: Appendi x VCR SONY 1084, 1083, 1089 SYLVANIA 1117 SYMPHONIC 1117 TIVO 1062, 1125, 1126, 1126 TOSHIBA 1 062, 1061 , 1106, 1107 , 1108 TRUTECH 1063 YAMAHA 1018 , 1131 ZENITH 1093 Bran d C.
95 Chapter 10: Appendi x CD NEC 2024, 20 11, 2012, 2081 , 2034, 2050 , 2017, 2021 , 2020 NEXXTECH 2042 NIKKO 2033 NOBLEX 2007 OLYMPUS 2046 OPTIMUS 2033, 2007, 2014, 2033 , 2063, 2014 , 2062 OPTONICA 2.
96 Chapter 10: Appendi x Receiver & amp HARMAN KARDON 3013 HITACHI 3037 INSIGNIA 3078 JC PENNEY 3033, 3000 JVC 3008, 3007 KENWOOD 3046, 3028, 3027, 3026 , 3029, 3028 KRELL 3043 LUXMAN 3031, 3059, .
97 Chapter 10: Appendi x Limited United States Warranty for LCD Televisions Toshiba America Information System s, Inc. (“TAIS”) makes the following limited warranties to original cons umers in the United States.
98 Chapter 10: Appendi x THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S. A. AS HEREBY LIMITE D, THE FOREGOING LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF A LL OTHER WAR RANTIES, GUARA NTEES, AGREEMENTS, AND SIMILAR OBLIGATIONS OF TAIS W ITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS.
99 Chapter 10: Appendi x that do not provide for direct and immediate acce ss to the product for service purposes. Labour charge s for set installation, setup, adjustment of custome r controls, and installation or repair of antenna systems are not covered by these warranties.
100 Chapter 10: Appendi x promotional material relating to the Television; (iv) the relationships that result from this warranty, (the foregoing claims, disputes controversies and disagreem ents are collectively referred to as the “Dispute”), shall be referred to and resolved by final and binding arbitration (to the exclusion of the courts).
101 Index Numerics 3D format ...... .............. .............. ...... 35 3D functions 3D Lock ............... .............. ...... 38 3D PIN .................... .............. ... 37 3D Start Message .......... .......... 37 3D Timer Lock ..... .
Corporate Headquarters: 9740 IRVINE BL VD. IRVINE, CA 92618 VISUAL PRODUCTS SERVICE AND SUPPOR T : 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. MANUF ACTURED BY HEAD OFFICE: 191 McNABB STREET , MAR.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba 47TL515U (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba 47TL515U noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba 47TL515U - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba 47TL515U reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba 47TL515U erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba 47TL515U besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba 47TL515U verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba 47TL515U. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba 47TL515U gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
