Benutzeranleitung / Produktwartung 47L6200U des Produzenten Toshiba
Zur Seite of 206
GMA300007010 3/12 Note: T o display a High Definition picture, the TV must be receiving a High Definition signal (such as an over- the-air High Defini tion TV broadcast, a High Definition digit al cable program, or a High Definition digit al sate llite program).
2 Dear Customer , Thank you for purchasing this T oshiba LED TV . This manual will help you use the many exciting features of your new LED TV . Before operating your LED TV , carefully read this manual completely .
3 Important Safety Instructions 1) Read these instructions . 2) Keep these instructions . 3) Heed all war nings . 4) Follow all instru ctions . 5) Do not use this apparatus near water . 6) Clean only with dry cloth . 7) Do not block any ventilation openings .
4 24) When selecting a locati on for the TV , • NEV ER allow any part of the TV to hang over the edge of the suppor ting furniture, • NEV ER place the TV on tall furnit ure (f or example, ente rta.
5 38) WA R N I N G : RISK OF ELECTRIC SHOCK! Never spill liquids or push objects of any kind into the TV cabinet slot s. 39) During a lightening storm, do not touch the connecting cabl es or prod uct.
6 Removing the Pedest al St and 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand prot rud ing over the edge of the surface. Note : Extreme care should always be used when removing the pedest al stand to avo id damage to the LCD pa nel.
7 Children and teenagers may be more suscep tible to health issues associated with viewing in 3D and should be closely supervised to avoid prolonged viewing without rest. • Watching TV while sitting too close t o the screen for an exten ded perio d of time may caus e eye st rain.
8 FCC Radiation Exposure St atement : This equipment complies with FCC radiat ion exposure limits set forth for an uncon trolled environment. This equipment should be inst alled and operated with minimum distance 20cm between the radiator & your body .
9 T rademark Information • Cinema Se ries, Cl earScan, ColorS tream, Dyna light, GameTimer , Nativ e Mode, Surflock, and Trivector are trademarks or r egistered tradem arks of T o shiba America Information S ystems, Inc. and/or T oshiba Corpor ation.
10 Copyright This guide is copyrighted b y Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form wi thout the prior written permission of Toshi ba. No patent liability is assumed, how ever, with respect to the use of t he information contained herein.
11 Contents Chapter 1: Introduction ... ......................... ..................... ............. 20 Features ..................................................................21 Overview of installation, setup, and use ..................22 TV front and side panel c ontrols and connections .
12 Contents LAN cable ..........................................................30 About the connection illustrations ....................30 Connecting an antenna, satellite receiver, and cable TV box ..................................................
13 Contents Initial setup ............................................................. 51 Performing the initial setup ............................... 52 IR Blaster Setup ......................................................55 Network Setup ........
14 Contents Enter a new PIN code ........................................ 81 Change or delete your PIN code ........................ 82 Forgotten PIN codes .........................................82 Setting the 3D start message ......................
15 Contents HDMI ® CEC Control input source selection .....100 Adjusting the amplifier’s audio ........................ 100 Other HDMI ® CEC Control functions ............... 101 Using the HDMI® RGB Range feature .................. 101 Viewing the HDMI® signal information .
16 Contents Static Gamma .................................................118 ClearScan ® ......................................................118 Cinema Mode ..................................................119 MPEG NR ............................
17 Contents Advanced Network Setup ................................136 DNS Setup ......................................................137 Network Connection Test ................................139 Using the software keyboard ........................
18 Contents Toshiba A/V Remote App ......................................171 Initial setup ..................................................... 172 Controlling devices .........................................173 Mouse control .......................
19 Contents Video/audio input ............................................193 ColorStream® (component video) HD input ... 193 HDMI® input .................................................. 193 Digital audio output ...................................
20 Chapter 1 Introduction Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuri es, damage to your equipment, or loss of data.
21 Introduction Features Features ❖ Integrated digital tuni ng (8VSB ATS C and QAM) — Eliminates the need for a separa te digital converter set-top box (in most cases).
22 Introd uctio n Overview of installa tion, setup, and use ❖ 3D capability —Allows yo u to view and ex perience 3D content on the television while using special glasses. ❖ ENERGY STAR ® qualified Overview of installa tion, setup, and use Follow these st eps to set up your TV and begin usi ng its many exciting features.
23 Introduction TV front and side panel controls and connections on, unplug the power cords for a few seconds and then plug them in and try again. 9 See “Navigating the m enu system” on page 61 for a quick overview of navigating the TV’s menu system.
24 Introd uctio n TV back panel controls and connections 5 IR Blaster OUT —Used to connect and control infrared remote-controlled devices. 6 Digital Audio Jack —Optical audio output i n Dolby ® D.
25 Introduction TV back panel controls and connections Back panel controls 1 POWER —Turns the TV On and Off . 2 VOL +- —Adjusts the volume level. When an onscreen menu appears, these keys function as ( / ) menu navigation buttons. 3 CH Up/Down arrow buttons —Changes the channel.
26 Introd uctio n TV back panel controls and connections 15 Analog Audio OUT —A nalog audio outp uts for connecting an audio amplifier. 16 Digital Audio OUT —Op tical audio output in Dolby ® Digi.
27 Chapter 2 Connecting Y our TV Overview of cable types Before purchasing cables, know the connector types your devi ces require. You can pu rchase cable s from most stores that sell audio/video devices.
28 Connecting Y our TV Overview of cable types video, red for stereo right audio, and white for stereo left (or mono) audio. Component video cables (red/green/blue) (Sample Illustration) Co mponent video cables Component video cables come in sets of three and are for use with video devices with component video outp ut.
29 Connecting Y our TV Overview of cable types Dual-wand IR blaster cable Connect the dual-wand IR blaster cable to the IR blaster terminal to control infrared remote cont rolled devices from the TV.
30 Connecting Y our TV Connecting an antenna, satellite receiver, and cable TV box Crossover LAN cable connects the TV directly to a computer, see “Connecting the TV directly to a computer wit hout an Internet connection” on page 43 .
31 Connecting Y our TV Connecting DVD to ColorStream ® or VCR to composite video To view the VCR or camcorder video: Turn On the VCR or camcorder video. Select VIDEO input source on the TV.* *To select the video input source, press the INPUT button on the remote control, see “Selecting the video input to view” on page 86 .
32 Connecting Y our TV Connecting remote IR devices ❖ If your DVD player or satel lite receiver does no t have component video, connect a standard A/V cable to the AUDIO/VID EO terminal. If your DV D player has HDMI ® video, see “Connect ing an HDMI® or DVI device to the HDMI® input” o n page 36 .
33 Connecting Y our TV Connecting remote IR devices ❖ Dual-wand IR blaster cable (see “Dual-wand IR blaster cable” on page 29 ) ❖ Other cables as required to conn ect the device(s) to the TV (see “Overview of cable types” on page 27 ) See the remote IR blaster setu p section.
34 Connecting Y our TV Connecting a digi tal audio system Point the TV remot e control toward the front of the TV and press the button for the desired function. The signal passes from the remote control through the TV to the device via the IR Blaster cable.
35 Connecting Y our TV Connecting an HDMI® or DVI device to the HDMI® input use with an exte rnal Dolb y Digita l decoder or other external audio system with optical audio input. You will need an Optical audio cable (Use an optical audio cable that has the larger “TosLink” connector and not the smaller “mini-optical” connector.
36 Connecting Y our TV Connecting an HDMI® or DVI device to the HDMI® input uncompressed digital video from a DVI (Digital Visual Interface) source device.
37 Connecting Y our TV Using the TV remote and HDMI® CEC Control to control more information, see “Selecting the video input to view” on page 86 . To connect a DVI device, you will need : ❖ HDMI ® to DVI adapter cable For proper operation, the length of an HDMI ® to DVI adapter cable should not exceed 9.
38 Connecting Y our TV Connecting an HDMI® audio system To connect an audio receiver and playback devices, you will need HDMI ® cables, see “HDMI ® cable (with HDMI Logo)” on page 28 . If several devices are connected, HDMI ® CEC Control feature may not operate properly , see “HDMI ® CEC Control input source selection” on page 100 .
39 Connecting Y our TV Connecting a computer You will need and HDMI ® cable. (Sample Illustration) L620 0U/L7200U Seri es— Connecting to HDMI ® ARC HDMI ® 's ARC (Audio Return Channel) feature This feature enables the audio signal of the TV to be sent to an AV amplifier via the HDMI ® cable.
40 Connecting Y our TV Connecting a computer Connecting a computer to t he TV’ s PC IN terminal: When connecting a computer to the PC IN term inal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable. For more information, see “Overview of cable types” on page 27 .
41 Connecting Y our TV Connecting a computer ❖ The PC audio input terminal on the TV is shared with the HDMI 4 and ColorStream ® HD2 terminal. For configuration information, see “Setting the computer audio” on page 103 . ❖ Some computer models cannot be connected to this TV .
42 Connecting Y our TV Connecting to a home net work For more information, see “Overview of cable types” on page 27 . (Sample Illustration) L620 0U/L7200U Se ries—Connect ing to an HDMI ® terminal The supported signal formats are VGA, SVG A, XGA, WXGA, SXGA, 480i (60Hz), 480p (60H z), 720p (60Hz), 1080i (60H z), and 1080p (24Hz/60Hz).
43 Connecting Y our TV Connecting to a home network Connecting the TV directly to a com puter without an Internet connection You will need a Crossover LAN cable.
44 Connecting Y our TV Connecting to a home net work Connecting the TV to a home network with an Internet connection - wired Items needed: ❖ Coaxial or telephone cable (dependin g on your modem type.
45 Connecting Y our TV Connecting to a home network ❖ Wireless LAN access point or wireless router ❖ Modem (DSL or cable) (Sample Illustration) L620 0U/L7200U Se ries—Connect ing with Internet c.
46 Chapter 3 Using the Remote Control Controlling other devices The TV’s remote control can operat e other devices as described in the IR Blaster section on page 55 . Installing batteries To install batteries: 1 Pull up to open the cover. (Sample Illustration) Re moving the battery cover 2 Install two AA size ba tteries.
47 Using the Remote Control Installing batteries Use carbon zinc batteries or alkaline batteries. (Sample Illustration) i nstalling the batteries 3 Slide on the cover. Do not expose batteries to excessive heat such as s unshine, fire, etc. ❖ Every time you change the batteries, you must reprogram the remote.
48 Using the Remote Control Remote control effective range Remote control effective range 1 For optimum performance, aim th e remote control directly at the TV and make sure there are no obstructions between the remote control and the TV. (Sample Illustration) Remo te control effective range 16.
49 Using the Remote Control Learning about the remote control Learning about the remote control Only the buttons used to operat e the TV are described in this section. For the HDMI ® CEC Control functions, see “Using HDMI® CEC Control” on page 97 .
50 Using the Remote Control Learning about the remote control The error message “NOT A V AILABLE” may appear if you press a key for a function that is not available. NOTE 1 POWER button T u r n s the TV On and Off. When the TV i s on, the powe r LED indi c ato r on the TV f r ont glow s g r een.
51 Chapter 4 Initial Setup and Menu Initial setup When you first turn on or reset the TV, the Initial Setup window appears. ❖ Y ou can stop Initial Setup by pressing the EXIT button. However , if you do not finish Initial Setup, the Initial Setup screen will appear every time you turn on your TV .
52 Initial Setup and Menu Initial setup Performing the initial setup 1 Menu Language/Country Select a language and country. Press OK . (Sample Illustration) S electing Menu Lan guage/Country 2 Time Zone Select a time zone. (Sample Illustration) S electing Time Zon e 3 Daylight Saving Time Select On or Off .
53 Initial Setup and Menu Initial setup 5 ANT/CABLE To select Antenna , first select Antenna . Then select Next. (Sample Illustration) S electing Antenna To select Cable , first select Cable . Then select Next . (Sample Illustration) S electing Cable If you do not want to scan channels, you do not need to make a selection for ANT/CABLE.
54 Initial Setup and Menu Initial setup While scanning is in progress, th e Auto Tuning Prog ress Screen appears. (Sample Illustration) Auto Tuning Progress Screen After scanning is complete, the auto tuning result s screen (such as the one below) will appear.
55 Initial Setup and Menu IR Blaster Setup 4 Scan again. IR Blaster Setup During the Initial Setup , the IR Blaster screen will appear with t he message, “IR Blaster setup will now begin. If you wish to skip, please select Skip.” To start the IR Blaster setup, select Next on the screen, or to skip the setup, select Skip .
56 Initial Setup and Menu IR Blaster Setup If a model has more than one Code Set, a message will appear stating “This model has more than one Code Set. Please select and test your preferred Code Set.” Y ou will need to choose a code set using the ( / arrow) buttons and perform the T est option to ensure the correct Code Set has been selected.
57 Initial Setup and Menu IR Blaster Setup If Audio is selected as the device type, the volume option is active. However if another device (other than Audio) is selected, then this option is not available and grayed out.
58 Initial Setup and Menu Network Setup 3 Select the Test button. A message screen will appear asking you “Was your device changed from one channel to anothe r by the IR blaster? If not, please check your configuration.” If the test failed, a “Test Failed” message will appear on the screen.
59 Initial Setup and Menu MediaGui de Setup 2 Using the ( / arrow) buttons, select the type of Wireless setup option: Easy Setup (WPS), Assisted Setup, or Manual Setup. ❖ Easy Setup (WPS). If your Access Point (AP) supports WPS, this method can be used.
60 Initial Setup and Menu MediaGuide Setup 1 Make sure the TV is connected to the network, and then select the Yes or No button using the ( / arrow) buttons. Then press the OK button. The TV will now establish conn ection with the information services it uses.
61 Initial Setup and Menu Navigating the menu system Refer to this information if there is a problem and you need to contact Customer Support. T o find help, the following operation can be performed at any time. MENU button > Menu > GET HELP > System Informa tion > OK button.
62 Initial Setup and Menu Main menu layout Main menu layout To open the main menus in the table below, press the MENU button on the remote control or TV control pane l.
63 Initial Setup and Menu Quick Menu Quick Menu Quick menu helps you access so me options more quickly. Press the QUICK button to display the Quick menu and press the ( / )buttons to select an option. Quick menu items differ depending on the current mode.
64 Chapter 5 Setting up your TV How to navigate the menu ❖ Press the MENU button. Select SETTINGS , Main menu, Submenu, and then press the OK or EXIT butt on. Changing initial settings From Quick Setup: 1 Press the MENU button. 2 Select SETTINGS , SETUP , Quick Setup , and then press t he OK button.
65 Setting up your TV How to navigate the menu 3 Press the ( / arrow) buttons to select Yes . 4 Press th e OK button. To change settings, see “Initial setup” on page 51 . Individual settings Menu Language You can choose from three diff erent menu langu age settings (English, Français, and Español) .
66 Setting up you r TV How to navigate the menu 3 Press the ( / arrow) buttons to select Home . 4 Press the OK button. ANT/CABLE In This setting configures the antenna input source for the ANT/CABLE terminal. 1 Press the MENU button. 2 Select SETTINGS , SETUP , and then ANT/CABLE In .
67 Setting up your TV How to navigate the menu T o tune to channels not stored in memory , use buttons 0–9 and the DASH button on the remote control. 1 Press the MENU button. 2 Select SETTINGS , SETUP , Auto Tuning , and then press t he OK button. A confirmation screen appears.
68 Setting up you r TV How to navigate the menu Skipping channels To prevent a channel from bein g viewed, you can set it to be skipped. 1 Press the MENU button. 2 Select SETTINGS , SETUP , TV Settings , and then press t h e OK button. 3 Press the ( / arrow) buttons to select Channel Options , and then press th e OK button.
69 Setting up your TV How to navigate the menu 2 Select SETTINGS , PREFERENCES , AV Connection , and then press th e OK button. 3 Press the ( / arro w) buttons to sel ect Input Labeling . 4 Press th e OK button. 5 Press the ( / arrow) butto ns to select the item you wish to skip.
70 Setting up you r TV How to navigate the menu Labeling video inputs The input labels are shown in the input selector and banner displays. You can label video inpu ts according to the devices you have connected to the TV. 1 Press the MENU button. 2 Select SETTINGS , PREFERENCES , AV Connection , and then press th e OK button.
71 Setting up your TV How to navigate the menu Auto Input settings options for each MODE SELECT button: The TV mode select button will be restricted to the ANT/CABLE input. T o set Auto Input 1 Press the MENU button. 2 Select SETTINGS , PREFERENCES , Mode Select Key Setup , and then press t h e OK butto n.
72 Chapter 6 Basic features Viewing 3D images Before using the 3D function, note the fo llowing: In addition to compatible 3D glasses, viewing 3D programming requires the following (not included): ❖ Compatible 3D playback device or 3D source. ❖ 3D capable H D M I ® cable.
73 Basic features Viewing 3D images Health precautions: ❖ Due to the possible impact on vision development, viewers of 3D programming should be age 6 or above. Children may be more susceptible to health effects from viewing 3D images and should be closely supervised.
74 Basic features Using 3D functions Watching the TV: ❖ Proper 3D effects or 3D-to-2D conversion results may not be obtained depending on the received 3D conte nt. ❖ 3D effect and image quality may vary depending upon content quality and display device cap ability/ functionality/settings.
75 Basic features Using 3D functions ❖ In order to switch to 3D, the TV must be receiving a 3D signal. ❖ If appropriate mode and format are not selected, 3D image is not correctly displayed. ❖ If the appropriate 3D mode and format a re not selected, the 3D image will not display correctly .
76 Basic features Using 3D functions Switching display mode or selecting 3D format There are four TV viewing modes: 3D signals can be sent in one of three formats: * This format cannot be selected manually. ❖ If the right and le ft images are th e same in Native mode, sel ect SBS.
77 Basic features Using 3D functions When viewing 3D mode or 2D to 3D mode, pressing the 3D button changes the viewing mode to Native mode. Switching to 3D mode ❖ Set 3D Auto Start to 3D . ❖ Press the 3D button and select 3D while viewing 2D mode or Native mode.
78 Basic features Using 3D functions Selecting 3D format from the Quick menu in 3D mode 1 Press the QUICK button. Select 3D Sett ings , and then press the OK button. 2 Press the ( / arro w) buttons to sel ect 3D Format Select , and then press the OK button.
79 Basic features Using 3D functions Switching to 2D mode 1 Set 3D Auto S tart to 2D . 2 Press the 3D button while viewing 3D mode. * Correct 2D image. Selecting 2D format from the Quick menu in 2D mode 1 Press the QUICK button. Select 3D Sett ings , and then press the OK button.
80 Basic features Using 3D functions * Correct 2D image. T ake off the 3D glasses in 2D mode Switching to Native mode Press the 3D button while viewing 3D mode. Press the 3D button while viewing 2D to 3D mode. When 3D format signal with 3D Auto Detect Information is received, it is not possible to switch to Native.
81 Basic features Setting the 3D PIN code T o switch 2D to 3D mode ❖ Press the 3D button and select 2D to 3D while viewing 2D or Native mode. When using A TV , Video, ColorS tream HD, Internet, or PC, the viewing mode can be changed to 2D to 3D mode by pressing 3D.
82 Basic features Setting the 3D PIN code the PIN code cannot be set to “0000.” Change or delete your PIN code 1 Press the MENU button. 2 Use the ( / arrow) buttons to select 3D , and then press the OK button. 3 Press the ( / arro w) buttons to sel ect 3D PIN .
83 Basic features Setting the 3D PIN code 6 Press the ( / arrow) buttons to select On or Off . Setting the 3D Lock When this feature is set to On, you must enter your 3D PIN code t o change the displ ay mode to 3D mode or 2D to 3D mode. 1 Press the MENU button.
84 Basic features Setting the 3D PIN code 1 Press the MENU button. 2 Use the ( / arrow) buttons to select 3D , and then press the OK button. 3 Press the ( / arro w) buttons to sel ect 3D Safety Settings , and then press the OK button. 4 Enter your 4-digit 3D PIN code.
85 Basic features Tuning Channels Switching left and right images The left and right images of the glasses can be swapped. If 3D images look blurry, switch the le ft and right sides of the 3D image. 1 Press the QUICK button to open the Quick menu. 2 Press the ( / arro w) buttons to sel ect 3D Settings , and then press the OK button.
86 Basic features Selecting the video input to view To temporarily prog ram the CH RTN button with a particular channel: 1 Tune to the channel you wish to program to the CH RTN button. 2 Press and hold the CH R TN button for approximately 4 seconds until the message “Memorized” appears.
87 Basic features Using closed captions ❖ Y ou can label the video input sources according to the specific devices you have connected to the TV , see “Labeling video inputs” on page 70 . ❖ Y ou can skip sources, see “Skipping video inputs” on page 68 .
88 Basic features Using closed captions To view captions or text: 1 Press the MENU button. Select SETTINGS , SETUP , TV Settings , and then press the OK button. 2 Press the ( / arrow) butto ns to select Closed Captions , and then press the OK button. 3 Press the ( / arro w) buttons to sel ect Analog CC Mode .
89 Basic features Using closed captions To view text: Press the ( / arro w) buttons to highlight T1 , T2 , T3 , or T4 . (Sample Illustration) Ca ptions - text If text is not available in your area, a black rectangle may a ppear on the screen. Y ou can remove this rectangle by setting Closed Captions Display to Off.
90 Basic features Using closed captions To customize the closed captions: 1 Press the MENU button. Select SETTINGS , SETUP , TV Settings , and then press the OK button. 2 Press the ( / arrow) butto ns to select Closed Captions , and then press the OK button.
91 Basic features Using parental controls Entering a new PIN code 1 Press the MENU button. Select SETTINGS , PREFERENCES , Parental PIN , and then press the OK button. 2 Use the number buttons to enter a 4-digit number, and then confirm the code. The PIN code cannot be set to “ 0000 ”.
92 Basic features Using parental controls The V-Chip fea ture in this TV supports the U.S. V- Chip system only . 1 Press the MENU button. Select SETTINGS , PREFERENCES , Parental Control and Locks , and then press the OK button. 2 Enter your 4-digit PIN cod e.
93 Basic features Using parental controls 5 Press the ( / arro w) buttons to sel ect Edit Rating Limits , and then press the OK button. The Edit Rating Limits screen appears. 6 Select Alt RS , and then press the OK button. The Edit Alternate Rati ngs screen appears.
94 Basic features Using parental controls Independent rating system for movies Indication other than rating system If you place an “X” in the box next to “Rated “None””, programs rated “None” or “Not Rated” will be blocked; Programs that do not provide any rating information will not be blocked.
95 Basic features Locking specific channels Displaying ratings To display the rating of the program you are wat ching, press the INFO button on the remote control. Unlocking programs If you try to tune to a program that exceeds the rating limits you have set, the TV will enter program lock mode and a warning message will appear on screen.
96 Basic features Locking specific channels Locking video inputs You can lock vid eo inputs and channel s 3 and 4. You cannot view the input sources or channels until you unlock th e inputs by entering the PIN code. 1 Press the MENU button. Select SETTINGS , PREFERENCES , Parental Control and Locks , and then press the OK button.
97 Basic features Using HDMI ® CEC Control ❖ A message appears when 10 minutes, 3 minutes, and 1 minute are remaining. ❖ If the TV loses power with time remaining, the TV will e nter Input Lock mode when power is restored (as if the GameT imer had been activated).
98 Basic features Using HDMI ® CEC Control T o set HDMI ® CEC Control Setup 1 Press the MENU button. Select SETTINGS , PREFERENCES , HDMI ® CEC Control Setup , and then press the OK button. 2 Press the ( / arro w) buttons to highlight Enable HDMI CEC Control .
99 Basic features Using HDMI ® CEC Control These functions depend on the connected devices. HDMI ® CEC Player Control menu functions 1 Press the QUICK button to open the Quick menu. 2 Select HDMI ® CEC Player Control , and then press the OK button.
100 Basic features Using HDMI ® CEC Control These functions depend on the connected devices. The HDMI ® CEC Player Control item is not available under the following conditions: ❖ A non-HDMI ® inp.
101 Basic features Using the HDMI® RGB Range feature Other HDMI ® CEC Control functions When Enable HDMI ® CEC Control and all items in the HDMI ® CEC Control Setup menu are set to On, the fo llow.
102 Basic features Viewing the HDMI® signal information If your HDMI ® connection is capable of 1080p and/or your TV is capable of refresh rates greater than 60 Hz, you will need a High Speed HDMI ® cable. Conventional HDMI ® / DVI cables may not work properly with this mode.
103 Basic features Using your computer with the TV 3 Press the ( / arrow) butto ns to select PC Settings , and then press the OK button. If a computer is not connected or there is no PC input signal, this menu will not be available. 4 Press the ( / arro w) buttons to select an item.
104 Basic features Setting the timer to turn on the TV Setting the timer to turn on the TV You can set the on timer to turn on the TV to a pr eset channel or input at a preset time. To activate the ti mer: 1 Press the MENU button. Select TIMERS , On Timer , and then press the OK button.
105 Basic features Setting the sleep timer 2 Press the ( / arro w) buttons to sel ect Enable On Timer . 3 Press the ( / arro w) buttons to sel ect Off . Setting the sleep timer You can set the TV to turn of f after a specific amount of time (maximum = 12 hours).
106 Basic features Setting No Signal Power Down Setting No Signal Power Down When an input's setting in this feature is set to On, The TV will automatically turn itself off after 15 minutes if no signal is detected.
107 Basic features Viewing support information ❖ Channel Label (if set or received) ❖ Current displ ay mode (Side by Side, Top and Bottom, or Frame Packing) ❖ Current display format (2D to 3D, or 3D to 2D) ❖ Input video format (3D appears when video format is 3D) To close the screen, press the INFO button again.
108 Basic features Power failure ❖ Press the ( / arrow) buttons to select No , and then press the OK button. Power failure If power is lost while you are watching the TV, the Last Mode Memory feature automatically tu rns on the TV when power is restored.
109 Chapter 7 Picture and Sound Controls Selecting the picture size You can view many pr ogram form ats in several picture sizes— Native, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3, Normal, and Dot by Dot. The picture size illustrations are examples only .
110 Picture and Sound Control s Selecting the picture size ❖ Using these functions to change the picture size (i.e., c hanging the height/width ratio) for any purpose other than your private viewing may be prohibited under the Copyrigh t Laws of the United States and other countries, and may subject you to civil and criminal liability .
111 Picture and Sound Control s Selecting the picture size 4:3 (Sample Illustration) Picture size - 4:3 Some program formats will display wi th sidebars and/or bars at the top and bottom . Full This setting is for viewing in th e 16:9 (480i, 480p) source programs only.
112 Picture and Sound Control s Selecting the picture size TheaterWide 1 This setting is for viewing in 4:3 format programs. (Sample Illustration) Pict ure size - TheaterWide 1 The center of the picture remains cl ose to its original proport ions, but the left and right edges are stretched horizontally to fi ll the screen.
113 Picture and Sound Control s Scrolling the picture Normal This setting is for viewin g SVGA, XGA, WXGA, and SXGA sources. (Sample Illustration) Picture size - Normal This size is a non-stretched display. Some input signal formats will display with sidebars and/or bars at the top and bottom.
114 Picture and Sound Control s Using the Auto Aspect feature 2 Press the ( / arro w) buttons to sel ect Picture Position , and then press the OK button. 3 Press the ( / arro w) buttons to sel ect Vertical Position . 4 Press the ( / arro w) buttons to make the appropriate adjustments.
115 Picture and Sound Control s Adjusting the picture Adjusting the picture Selecting the picture mode You can select your desired picture settings from the modes described below. PC mode is available for HDMI ® and PC inputs only (not displayed for other input sources).
116 Picture and Sound Control s Adjusting the picture * Backlight: Adjust s the brightness of th e entire screen. When in video mode and no signal is input, this selection is set to 0.
117 Picture and Sound Control s Using the advanced pi cture settings features Using the advanced picture settings features Some of the Advanced Picture Settings features will not be available for adjustment when the Picture Mode is set to AutoView .
118 Picture and Sound Control s Using the advanced picture settings features When the Picture Mode is set to Au toView, the level range is from -5 to +5. DynaLight ® The DynaLight ® feature automatically strengthens the black coloring of dark areas in the video according to the level of darkness.
119 Picture and Sound Control s Using the advanced pi cture settings features Cinema Mode This feature provides smooth er motion and a crisper image. 1 Press the MENU button. Select SETTINGS , PICTURE , Advanced Picture Settings , and then press the OK button.
120 Picture and Sound Control s Using the advanced picture settings features The differences may not always be notic eable. For the best results, use lower settings, as picture quality may be greatly reduced if the setting is too high. If the picture mode is set to Gam e or PC, this feature is not available.
121 Picture and Sound Control s Using the advanced pi cture settings features 6 Press the ( / arro w) buttons to adjust the level. The adjustment range is from 0 to 100. (Sample Illustration) Backl ight adjustment window 7 Press the OK button to fix the adjustmen t.
122 Picture and Sound Control s Setting the expert picture settings 3 Press the ( / arro w) buttons to sel ect a color. Press the ( arrow) button. 4 Press the ( / arro w) buttons to sel ect Hue , Saturation , or Brightness . 5 Press the ( / arro w) buttons to adjust the setting .
123 Picture and Sound Control s Setting the expert picture settings 3 Press the ( / arro w) buttons to sel ect On . 4 Adjust picture settings. When the TV is in 3D mode, this feature is not available.
124 Picture and Sound Control s Locking the picture settings Setting T ype You can adjust the white balance setting. 1 Press the MENU button. Select SETTINGS , PICTURE , Expert Picture Settings , and then press the OK button. 2 Press the ( / arro w) buttons to sel ect White Balance , and then press the OK button.
125 Picture and Sound Control s Adjusting the audio Adjusting the audio Muting the sound Press the MUTE button to partially reduce (1/2 Mute) or turn off (Mute) the sound. Each time you press the MUTE button, the mute mode changes in the following order: 1/2 Mute, Mute, Volume, 1/2 Mute, etc.
126 Picture and Sound Control s Adjusting the audio Adjusting the range You can adjust bass and treble. 1 Press the MENU button. Select SETTINGS , SOUND , and then Bass or Treble . 2 Press the ( / arro w) buttons to adju st the range, and then press the EXIT button.
127 Picture and Sound Control s Adjusting the audio Audyssey Premium T elevision™ These televisions use a suite of technologies for better sound including: ❖ Audyssey EQ ® —provides clear, accurate and natural sound right out of the box. This technol ogy ensures you enjoy your audio experience as much as your video.
128 Picture and Sound Control s Using the surround sound feature ❖ If Dynamic Range Control is set to On, this feature is automatically set to Off. ❖ This feature does not affect the audio signal output from the DIGIT AL AUDIO OUT terminal.
129 Chapter 8 Advanced features Using your home network ❖ This TV can share videos, music, and photos across your home network and other connect ed products thro ugh the MediaShare feature. In order to do this, you will have to configure the network settings on your TV, see “ePORTAL MediaShare (Videos, Music, and Photos)” on page 157 .
130 Advanced features Using your home network When using a Wireless network connection: Wireless LAN and your Health: Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy.
131 Advanced features Setting up the Network Setting up the Network You can select the Network Type. 1 Press the MENU button. Select NETWORK > Network Setup , and then press the OK button. 2 Press the ( / arro w) buttons to highlight Network Type .
132 Advanced features Setting up the Network 4 Press the ( / arro w) buttons to sel ect PBC . 5 Press the ( arrow) button to select Start Scan , and then press the OK button. 6 Following the onscreen instructions, pu sh the appropriate button on your A P.
133 Advanced features Setting up the Network Assisted Setup 1 Press the MENU button. Select NETWORK > Network Setup , and then press the OK button. 2 Press the ( / arro w) buttons to sel ect Wireless Setup , and then press the OK button. 3 Press the ( / arro w) buttons to sel ect Assisted Setup , and then press the OK button.
134 Advanced features Setting up the Network 4 Press the ( / arro w) buttons to sel ect Network Name , and then press the OK button. The Software Keyboard window appears. 5 Input the Network Name using the Soft ware Keyboard. For more information, see “Using the software keyboard” on page 139 .
135 Advanced features Setting up the Network Settings are not saved if the BACK button is pressed be fore Done is selected. Wireless Information The settings configured in Wi reless Setup can be confirme d. 1 Press the QUICK button. Select Wireless Information , and then press the OK button.
136 Advanced features Setting up the Network Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP , the Speed value might be low .
137 Advanced features Setting up the Network 2 Press the ( / arro w) buttons to sel ect Advanced Network Setup , and then press the OK button. 3 Press the ( / arro w) buttons to sel ect IP Address Setup , and then press the OK button. 4 Select Auto Setup .
138 Advanced features Setting up the Network 2 Press the ( / arro w) buttons to sel ect Advanced Network Setup , and then press the OK button. 3 Press the ( / arro w) buttons to sel ect DNS Setup , and then press the OK button. 4 Select Auto Setup . Press the ( / arrow) buttons to select On.
139 Advanced features Using the software keyboard 3 Press the ( / arro w) buttons to sel ect MAC Address , and then press the OK button. Network Connection T est This function checks Internet connectivity. 1 Press the MENU button. Select NETWORK > Network Setup , and then press the OK button.
140 Advanced features Performing a Software Upgrade 3 Repeat Step 1 and 2 until you have entered all desired text. 4 Press the BLUE button to save your settings and return to the previous screen. If the BACK button is pressed, changes are not sa ved and the software keyboard window is closed.
141 Advanced features Viewing the Software Licenses ❖ Y ou will not be able to use the TV set while performing the upgrade. ❖ Do not turn off the TV during the upgrade. ❖ By upgrading, the factory default values may be changed. 2 Press the MENU button.
142 Advanced features Using the SmartTV feat ures Using the SmartTV features ❖ Y ou need to connect to the Internet before using this feature, see “Setting up the Network” on page 131 . ❖ Certain services may not be currently available in your area.
143 Advanced features Using the SmartTV features ❖ MediaShare (Media Player): Co nnected Media Servers and USB devices ❖ The Internet Performing a Search You can perform a search using the SEARCH butt on on the rem ote control or the SearchAll bar on the ePORTAL page.
144 Advanced features Using the SmartTV feat ures ePORT AL Apps The ePORTAL Apps can be used to display bonus co ntent through content service providers such as: ❖ Netflix ® ❖ VUDU Apps™ ❖ VUDU Movies™ ❖ YouTub e ® ❖ CinemaNow ® ❖ MediaGuide ❖ eMANUAL Certain services may not be available in your area.
145 Advanced features Using the SmartTV features ❖ The resolution of video content streamed from Netflix ® varies depending on the communication speed and bit-rate. ❖ Future upgrades can change the screens and mess ages displayed in the Netflix ® feature.
146 Advanced features Using the SmartTV feat ures 1 Press the MENU button. Select NETWORK > Smart Apps Setup > VUDU Deactivation , and then press the OK but ton. 2 Press the ( / arrow) buttons to select Yes , and then press the OK button. If the VUDU™ icons are not shown in the ePORT AL, you may need to update the TV firmware.
147 Advanced features Using the SmartTV features ❖ Y ouT ube™ content has been independently managed by Y ouT ube™, LLC. ❖ Not all Y ouT ube™ content that can be accessed by computer may be viewed with this TV . ❖ This TV may not be able to do some operations that computer can do.
148 Advanced features Using the SmartTV feat ures search for and browse your favorite sites, and find all the content you want, with simple, int uitive navigation. The web browser on this device: ❖ does not support platform-dependent technologi es such as ActiveX.
149 Advanced features Using the SmartTV features 6 You can now browse websites on your TV using the ( / / / arrow) buttons on the remote control or by using the Wireless QWERTY keyboard. Select Mouse Emulation by pressing the GREEN button on the remote control to navigate with a driverless wireless mouse (wireless mouse is not included).
150 Advanced features Using the SmartTV feat ures Adding Favorites Websites 1 Connect to the network. 2 Press the ePORTA L button on the remote control to access the ePORTAL page. Pressing the INTERNET button on the remote control will also launch the web browser .
151 Advanced features Using the SmartTV features ❖ If using the onscreen keyboard, press th e BLUE button to view the page. ❖ If using the USB/QWERTY keyboard, press the ENTER button to view the page. ePORT AL Messages You can create personal m essages on your TV usi ng the Messages feature.
152 Advanced features Using the SmartTV feat ures 2 Press the RED button to delete the event(s) for that date. Edit an event 1 Select the Event in the Event list. Press OK . 2 The Edit Event window is displa yed. You can change the date, event information, and repeat options.
153 Advanced features Using the SmartTV features ePORT AL Preferences Use ePORTAL Preferences to cust omize the look and feel of the ePORTAL. From Preferences, you can: ❖ Adjust the background by se.
154 Advanced features Using the SmartTV feat ures If you see an error message saying that the MediaGuide was not able to connect to the network, you should check your n etwork connections before trying again.
155 Advanced features Using the SmartTV features 4 In the subsequent menu s, use the ( / arrow) buttons to navigate between menu levels. The sub-menus include My Profile; Movies, Setting s, TV, Search, and TV Listings.
156 Advanced features Using the SmartTV feat ures Selecting a listing If you can select and open a TV program, movie, or celebrity, an Overview screen will appear with general informati on about the selected item. It also contains opt ions such as watch, bookmark, o r see a trailer.
157 Advanced features Using the SmartTV features 6 Press the OK button to open the detail screen for that item . To search all of the connected media devices across your network as well as the TV programming, use the SearchAll feature in the ePORTAL, see “ePORTAL SearchAll” on page 142 .
158 Advanced features Using the SmartTV feat ures ❖ Connected Media Server: Your computer (for example) ❖ Connectivity is not guara nteed for all devices.
159 Advanced features Using the SmartTV features If Auto Start is set to Off, you can start the MediaShare (Media Player) manually . Manual Start 1 Insert a USB device in to the USB terminal. 2 Press the ePORTAL button. Select the Video , Music , or Photos icon, and then press the OK button.
160 Advanced features Using the SmartTV feat ures 5 T o select a file in the list of contents 1 Press the ( / / / arro w) buttons to select a file or folder. 2 Press the OK button to move to the next layer, or press the BACK button to return to the previous layer.
161 Advanced features Using the SmartTV features The P AUSE button or operations during Pause may not be functional depending on content or media server . T o locate a specific file ❖ Press the Skip Reverse or Skip Forward button repeatedly to access the desired file.
162 Advanced features Using the SmartTV feat ures File specifications: USB use: ❖ File format: MPEG2 PS, MPEG2 TS ❖ Video: MPEG2, H.264 ❖ Audio: MPEG1-Layer2/MPEG1-Layer3/D olby ® Digital (AC3).
163 Advanced features Using the SmartTV features The PA U S E button or operations during Pause may not be functional depending on content or media server . Certain processes may take some time to complete. To locate a specific file: ❖ Press the Skip Reverse or Skip Forward button repeatedly to access the desired file.
164 Advanced features Using the SmartTV feat ures File specifications: USB use: ❖ File format: MP3, MP4 (AAC), LPCM ❖ Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz ❖ Bit rate: From 32 to 320 kbps ❖ Maximum number of files: 1000 per folder Content on Connected Media Server: ❖ File format: MP3, LPCM ❖ Sampling frequency: 32 kHz, 44.
165 Advanced features Using the SmartTV features ❖ Displaying thumbnail data may take time. ❖ In order to use the / arrow to scroll the screen, there must be enough content to take up two screens. Single View mode In this view m ode, only files locat ed in the selected directory are displayed.
166 Advanced features Using the SmartTV feat ures Rotate the image While viewing the image in Single View mode or Slideshow mode, press the ( / arrow) buttons to rotate the image 90 degrees. Return to the thumbnail Press the BACK button while in Single View mode or Slide Show mode.
167 Advanced features Search Search To search for content, 1 Select the search. 2 Enter in keywords and the search will search for: ❖ Videos; Title name ❖ Music; Title name/Artist name/ Album nam e ❖ Photos; Ti tle name ❖ USB; Videos/Music /Photos; File name Folders are not subject to the search function.
168 Advanced features Network Device Setup 3 Use the ( / / / arrow) buttons to navigate to the User Name or Password field. The keypad will appear so that you can enter in the user name and password. You can use the remote control keypad, the software keypad, or the USB/QWERTY keyboard to ent er in the user name and password.
169 Advanced features Network Device Setup 5 Input the device name by using the Software Keyboard. To save your setting, press th e BLUE butt on. 6 Select Done . Press the OK button. 7 If you want to limit access from unexpected Media Controllers, press the ( / arrow) buttons to select On .
170 Advanced features Network Device Setup Media Controller setup You can limit which Media Cont ro ller can control this TV. If Access Control is enabled, only those Media Controllers with a check will be allowed to control the TV. 1 Press the MENU button.
171 Advanced features Toshiba A/V Remote App 4 Press the ( / arrow) butto ns to adjust to the desired volume. The TV's remote control can set volume regardless of the value of Maximum Volume Setup Apps Control Profile To select the Apps Control Profile 1 Press the MENU button.
172 Advanced features Toshiba A/V Remot e App ❖ Third party Internet services are not provided by T oshiba, may change or be discontinued at any time and may be subject to Internet service provider restrictions.
173 Advanced features Toshiba A/V Remote App 3 Select the desired Toshib a equipment from the list. (Sample Illustration) Toshiba A/V Remote App—Device Select screen 4 Activate the selected device by entering in the a 4-digit PIN code on the pop-up window on the tablet or smartphon e.
174 Advanced features Toshiba A/V Remot e App The device control p age will show several controls, depending on the device. Some of thes e controls may include: ❖ Number keypad —to enter in 0-9 digit numbers ❖ INPUT —Selects t he video input source.
175 Advanced features Toshiba A/V Remote App In addition, the Toshiba A/V Remo te App also includes a text input, mouse control and a touchpad control that all ows you to use your tablet or smartphone.
176 Advanced features Toshiba A/V Remot e App ❖ Keyboard button —displays the keyboard on screen ❖ Left mouse click button —left-clicks on the selected item ❖ Right mouse click button —rig.
177 Advanced features Toshiba A/V Remote App For example, you can have the controls for the TV, cable box, satellite box, and Blu-ray™ all on one screen.
178 Advanced features Toshiba Send & Play App Popup and detailed information When you tap or touch and hold a TV program listing, it will show more information about the selected program in a screen overlay. From this screen, you can decide whether to watch the program by selecting the Watch button or select the More button.
179 Advanced features Toshiba Send & Play App ❖ Third party Internet services are not provided by T oshiba, may change or be discontinued at any time and may be subject to Internet service provider restrictions.
180 Advanced features Toshiba Send & Play App 3 Once the page has been loaded, tap the Send icon to sen d the website/URL to the TV. (Sample Illustration) Toshiba Send & Play b rowser screen 4 The website/URL will automatically launch on the TV.
181 Chapter 9 T roubleshooting General troubleshooting Before calling a service technician, review this chapter or visit the Toshiba technical support Web s ite at suppo rt.toshiba.com for possible causes/solutions fo r the problem you are experiencing.
182 T roubleshooting Picture problems Other problems. If your TV’s problem i s not ad dressed in this Troubleshooting chapter or the recommended solutio n has not worked, use the Reset Factory Defaults procedure, see “Resetting to Factory Defaults” on page 107 .
183 T roubleshooting Picture problems Adjust the picture quality, see “Using the advanced picture settings features” on page 117 . If Edge Booster do es not achieve a sharper picture, change the Sharpness value to increase the sharpness level, s ee “Edge Enhancer” on page 117 .
184 T roubleshooting Sound problems ❖ The settings of Side Shared Audio and Rear Sh ared Audio may be not correct. Check the connections, see “Connecting a digital audio system” o n page 35 . ❖ Turn off and unplug the TV from the AC wall outlet fo r a few seconds and plug it back in.
185 T roubleshooting Closed caption problems If you cannot tune digital channels, check the antenna configuration, see “Initial setup” on pag e 51 . If the problem persists, clear all channels from the channel list and reprogram channels into memory, see “Storing channels in m emory (optional)” on page 66 .
186 T roubleshooting HDMI® problems unplug the power cord. After approximately one m inute, plug the power cord in and turn on the TV. If several devices are connected, the HDMI ® CEC Control feature may not operate properly. Read the instruction manual of the connected HDMI ® CEC device.
187 T roubleshooting Network problems Network Setup fails (Manual). Ensure that the TV IP address is not the same as any other device on the network. ❖ Example: IP address 192.168.0.100 and IP address 192.168.0.101 are differen t ad dresses on the same netw ork.
188 T roubleshooting Wireless network problems Too many devices are connected. You cannot conn ect more than 32 sharing devices at one time. The media server is not tu rned On. The “server” is not a media server device. Check the firewall and streaming settings on the media server.
189 T roubleshooting Light Indicator Confirm that the contents of eith er the media server or the USB storage device are in formats that are supported by this TV , see “MediaShare (Media Player) specifications” on page 157 . Depending on the media server, access may be limited by the MAC address.
190 T roubleshooting If the problem persists af ter trying the solutions ❖ Power On failure. Turn off the TV and unplug the power cord. After approximately one minute, plug th e power cord in again and turn on the TV. If the problem persists after tr ying the solutions In the U.
191 Appendix A Specifications ❖ This model complies with the specifications listed below . ❖ Designs and specifications are subject to change without notice. ❖ This model may not be compatible with features and/or specifications that may be added in the future.
192 Specifications Power source Power source 120 V AC, 60 Hz Power consumption Audio power Speaker type 42L6200U 0.8 A (maxi mum current) 0.3 W in Standby mode 47L6200U 0.9 A (maxi mum current) 0.3 W in Standby mode 55L6200U 1.0 A (maxi mum current) 0.
193 Specifications Video/audio terminals Video/audio terminals Video/audio input ColorStream ® (component video) HD input HDMI ® input Digital audio output Optical type PC input 15-Pin D-sub Analog RGB Wireless connection Video 1 V (p-p), 75 ohm, negative sync.
194 Specifications Dimensions (include foot stand) Ethernet IEEE 802.3. USB Universal Serial Bus Sp ecification, Revison 1.1. Universal Serial Bus Sp ecification, Revison 2.0. Dimensions (include foot stand) Mass (weight) Operating conditions 42L6200U Width 37.
195 Specifications Supplied accessories Supplied accessories ❖ Remote control with two si ze “AA” batteries ❖ L7200U model number: CT-90395 ❖ L6200U model number: CT-90408 ❖ Resource Guide.
196 Specifications Acceptable signal formats for PC IN, HDMI®, and 3D HDMI ® signal formats ❖ The HDMI ® inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA-DMT as in the table below .
197 Specifications Acceptable signal formats for PC IN, HDMI®, and 3D Format Resolution V. Frequency H. Frequen cy Pixel Clock Frequency VESA Standard (DMT) VG A 640 x 480 5 9 .9 4 0 H z 31.4 69 kHz 25. 175 MH z TB D 72.809 Hz 37 .861 kHz 31.500 M Hz TBD 75.
198 Specifications Acceptable signal formats for PC IN, HDMI®, and 3D 3D Signal formats* *Some content may not be supported dependin g on the input source format. Resolution Aspect ratio V. Frequency H. Frequency Pixel Clock Frequency 3D Structure 1280 x 720p 16:9 23.
199 Specifications Operating the TV with combination buttons Operating the TV with combination buttons You can directly operate the TV power, input switch, picture size switch, and picture mode switch by pressing a combination bu tton while holding down a color but ton.
200 Specifications Operating the TV with combination buttons YELLOW 1 AutoView (picture mode) 2 Dynamic (pictu re mode) 3 Standard (picture mode) 4 Movie (picture mode) 5 - (picture mode) 6 Store (pic.
201 Index Numerics 3D 2D from Quick m enu 79 3D from Quick m enu 78 3D lock 83 3D timer lock 83 adjusting 2D to 3D depth 84 auto start mode 81 button oper ation 76 change pin code 82 delete pin code 8.
202 Index Dolby® Digital Dynamic Range Control 126 muting sound 125 optical audio output format 12 6 Auto Aspect using 114 auto input features 70 C cables 3.
203 Index delete event 151 editing favorite apps 15 2 events 151 MediaShare 157 modify favorites 152 preferences 153 search 143 select apps 144 view favorites 152 ePortal 142 ePORTAL Internet 147 acce.
204 Index Network Device Setup 167 no signal power down set 106 O overview installation 22 setup 22 use 22 P parental controls blocking program s/movies by rating (V-Chip) 91 using 91 Photos access vi.
205 Index mass (weight) 194 operating conditions 194 PC IN signal formats 195 PC input 193 power consumption 192 power source 192 remote, combination buttons 199 speaker type 192 supplied accessories .
206 Index access web page 150 adding favorites 150 browsing favorites 149.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba 47L6200U (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba 47L6200U noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba 47L6200U - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba 47L6200U reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba 47L6200U erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba 47L6200U besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba 47L6200U verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba 47L6200U. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba 47L6200U gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
