Benutzeranleitung / Produktwartung 32W300P des Produzenten Toshiba
Zur Seite of 36
Model 32W300P LCD Colour Television Operating Instructions 30E2825A_En_COVER 1/15/07, 8:26 PM 1.
2 Features • LCD MONIT OR Resolution: 1366 x 768 pixels • On-Screen Language Displa y in 6 languages (English, Spanish, Ger man, F rench, Italian or Russian) • NICAM/Ger man A2 STEREO Reception .
3 Contents Features ................................................................... 2 Contents ................................................................... 3 Safety Precautions ................................................... 4 Installation and important information .
4 Safety Precautions This equipment has been designed and manuf actured to meet international safety standards b ut, like any electrical equipment, care must be taken to obtain the best results and f or safety to be assured. Please read the points below f or your o wn safety .
5 Installation and impor tant inf ormation Locate the tele vision awa y from direct sunlight and strong lights, soft, indirect lighting is recommended f or comf or table viewing. Use cur tains or blinds to prev ent direct sunlight falling on the screen.
6 Location of contr ols Front Side Description of Indicators and Controls 1. Loudspeakers 2. (On/Standby) indicator: It lights up in red at standby, and in green at power on. 3. Remote sensor 4. (Channel) ▲ / ▼ buttons: Press ▲ to change to a higher numbered channel set into memory.
7 Remote Contr ol Function P age Enter standby mode or turn on the power 10 Display program position number 16 Teletext time display Select an input source 10, 26, 28, 32~34 Select picture format 24 S.
8 Z Z Z Z Z Z Remote Control Install the batteries Use batteries type UM3 (AA-Size). Do not use old or weak batteries. The remote control may not w or k properly with a weak v oltage from such batteries. Replace exhausted batteries with new ones . Ne ver tr y to recharge normal batteries - this could cause an e xplosion.
9 AC INPUT Antenna connection Note: Before you connect other appliances: •T o avoid potentially damaging your set, make sure all items are switched of f and disconnected from the mains power when you make the connections. • Arrange the desired connection.
10 Quic k guide f or MENU operation/Selecting the video input sour ce Make sure the antenna connection and power suppl y are connected as per the description on previous page. Preparation: Tu rn on the unit with the (On/ Standby) b utton on the top of the unit.
11 On-screen Language Selection/T eletext Langua g e Selection On-screen Language Selection 1 Select LANGU AGE (unless y ou hav e already selected when the set was first s witched on). Then press to display LANGUAGE menu. 2 Press or to select the desired language .
12 PA L C H 1 A utomatic station presetting with the b uilt-in T uner The A utomatic station presetting feature is for the set’ s built-in analogue tuner onl y . If y ou have a device such as a digital decoder (eg. Satellite or Digital T errestrial) connected (see P .
13 Changing the or der of stored channels 1 Select CH ALLOCA TION. Then press . 2 Press or until the position number that y ou want to mov e is selected (e.g. CH 40), then press ENTER . 3 Press or until the channel position that y ou want to mov e the program to is selected (e .
14 Manual TV station presetting Example: Preset the ZDF on program position 2. 1 Select MANU AL TUNING. Then press . 2 Press or to select P AL or SECAM-L. Then press ENTER . 3 Press . The auto search star ts f orward. It will stop at each station with good reception.
15 TV AC INPUT Connect with Satellite receiver as shown belo w. Select the TV -Program at the satellite receiver . T o do this, use the remote control of the satellite receiver . Y ou can not store the same station once again additionall y in LCD-Monitor which already stored in satellite receiver .
16 Basic Operation Note: If the built-in tuner does not receive anything (e.g. if no antenna is connected) during TV -operation, then the TV -unit will change to standby after approx. 15 minutes. Press P or to change up or down a channel. This takes appro x.
17 Stereo reception with the b uilt-in tuner NICAM stereo sound reception: 1 Select NICAM. Press or to select A UT O or OFF . Select OFF if you do not w ant to receive NICAM sound. 2 Press EXIT to return to the normal screen. The following types of broadcast are possible with NICAM transmissions “NICAM ST” illuminates for appro x.
18 Stereo reception with the b uilt-in tuner When 2-channel sound reception is av ailable, you can select y our preferred audio with the A UDIO button.
19 Bass, T reble and Balance 1 Select BASS. Then press or to adjust the bass. If you wish to set the treble or balance, press or to select TREBLE or BALANCE.
20 Using the surr ound sound feature/ T urning off the b uilt-in speaker s Using the surround sound feature The SURROUND f eature processes the audio signal to expand the listening field wider and deeper to create a ‘pseudo surround-sound’ from the TV’ s speakers .
21 Brightness, Contrast, Colour and Sharpness/DNR Notes: •T o reset BRIGHTNESS , CONTRAST , COLOUR, TINT and SHARPNESS to the factory preset values, select RESET in step 1 then press or . • In HDMI or COMPONENT mode, the “DNR” option cannot be selected.
22 Bac k light 1 Select BA CKLIGHT . Then press or to adjust the lev el you require. 2 Press EXIT to return to the normal screen. : SELECT : ADJUST : RETURN MENU A V2 INPUT A V A V2 OUTPUT TV AV COLOUR A UTO BACKLIGHT 16 : END EXIT Y ou can use the Back light feature to adjust the screen brightness for impro ved picture clarity .
23 Selecting the colour temperature/Blue bac k Selecting the colour temperature Change the picture quality by selecting from three preset colour temperatures - cool, medium and warm - as described in the follo wing table; 1 Select COLOUR TEMPERA TURE.
24 Manual format setting Pressing PICTURE SIZE repeatedly scrolls through the f ollowing options. 4:3 This mode shows a 4:3 picture in its original size and shape with vertical bands on the left and right side.
25 Scrolling the picture in CINEMA mode When the CINEMA mode is selected, you can adjust the ver tical picture position. Note: Y ou cannot move the picture v er tically in any of the other picture modes. 1 Select VER TICAL POSITION. Then press . 2 Press or to adjust the vertical position of the picture.
26 PC connection As PCs are sometimes supplied with a ‘conventional’ CRT monitor , you ma y need to adjust the display settings of your PC’ s graphics card, otherwise the pictures ma y not appear correctly .
27 Example: Adjust the contrast. 1 During PC mode press MENU once. The Menu will appear on the screen. 2 Press or to select CONTRAST . Then press or to adjust CONTRAST .
28 Selecting the HDMI audio input source Y ou must choose the appropriate HDMI audio input setting for each connection, depending on whether the source is equipped with a D VI or HDMI sock et. 1 Select HDMI1 or HDMI2. Press or to select HDMI or D VI. 2 Press EXIT to return to the normal screen.
29 T eletext T elete xt is sent page by page. This unit is able to automatically store up to 812 pages , but they can only be accessed once they ha ve been stored. This can take a f ew moments . F aste xt/TOPte xt The F aste xt/TOPte xt is telete xt with a special director y .
30 667 667 ARD-Text 21.07.03 15:01:38 1/2 T elete xt Hold Pages Some pages are divided up into subpages by the channel. Subpages are automatically shown in turn, as they are transmit- ted. In order to hold the page, press . Press again in order to display the next subpage.
31 Conceal stored channels The channels stored in the memory can be selected using P or .If you want to skip certain channels from the sequence, y ou can conceal them. These channels are not deleted - they can be accessed at any time with the n umbered b uttons .
32 Video recorder 1 to AV1 Playback (All illustrated SCART cables are not supplied) TV (Left side view) Video recorder 2 to AV2 Recording Decoder (All illustrated SCART cables and antenna cables are n.
33 (AV cable, not supplied) TV (Left side view) AV output To AV3 IN Video camera (example) Connection to other equipment 3. Connecting an audio system This connection allows y ou to hear the TV sound through external speakers connected to an audio amplifier .
34 6. Setting of Scart socket AV2 1 In , select A V2 INPUT or A V2 OUTPUT . 2 Selecting the “A V2 INPUT” type - this ensures that the TV processes the input signal correctl y . Press or to select A V or S-VIDEO . AV : Composite signal (e.g. from a video recorder).
35 AV colour adjustment/P ower return f eature AV colour adjustment The AV Colour setting only applies when viewing de- vices connected to the AV inputs. 1 In menu, select A V COLOUR. 2 Press or to select A UTO . 3 If A UTO option does not work, press or to select desired colour (e.
36 T roubleshooting table/Specifications Troubleshooting table Please check the following list before requesting service. In menu, the TUNING option cannot be selected. The unit is set to AV mode. Press 1 on the remote control. 12 Symptom Possible solution Page No picture, no sound Switch on the set.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba 32W300P (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba 32W300P noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba 32W300P - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba 32W300P reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba 32W300P erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba 32W300P besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba 32W300P verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba 32W300P. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba 32W300P gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
