Benutzeranleitung / Produktwartung 23HL84 des Produzenten Toshiba
Zur Seite of 48
23HL84 Intr oduction ENER Y ST AR P AR TNER Connecting y our TV Setting up y our TV Using the TV’ s Features Appendix J3R50121A(E)Cover 12/08/2004, 10:48 AM 1.
2 Child Saf ety It Makes A Differ ence Wher e Y our TV Stands Congr atulations on your pur chase! As you enjoy y our new TV , keep these safety tips in mind: The Issue If you are like most consumers, you have a TV in your home. Many home s, in fact, have more than one T V .
3 Intr oduction Connecting y our TV Setting up y our TV Using the TV’ s Features Appendix FCC compliance information CA UTION: TO PREVENT ELECTRIC SHOCK DO NO T USE THIS POLARIZED PLUG WITH AN EXTENSION CORD , RECEPT A CLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED T O PREVENT BLADE EXPOSURE.
4 9. VENTILA TION Slots and openings in the cabinet back or bottom are provided f or ventilation, and to ensure reliable operation of the unit, and to protect it from o verheating. These openings must not be b lock ed or covered. The openings should never be b lock ed b y placing the unit on a bed, sof a, rug, or other similar surface .
5 Intr oduction Connecting y our TV Setting up y our TV Using the TV’ s Features Appendix 18. SER VICING Do not attempt to service this unit yourself, as opening or remo ving cov ers ma y expose y ou to dangerous voltage or other hazards. Ref er all ser vicing to qualified service personnel.
6 Precautions Notes on handling ■ Do not subject the LCD panel to physical shock, such as dropping it. It may cause unit damage and malfunction. ■ Retain the original shipping car ton and packing materials. For maximum protection when shipping, repack the unit as it w as originally packed at the f actory .
7 Intr oduction Connecting y our TV Setting up y our TV Using the TV’ s Features Appendix Introduction ........................................................... 2 IMPOR T ANT SAFEGU ARDS ..................................... 2 Precautions ........
8 Exploring y our new TV Y ou can operate your TV by using the b uttons on the top panel or the remote control. The side and back panels provide the inputs to connect other equipment to y our TV .
9 Intr oduction Connecting y our TV Setting up y our TV Using the TV’ s Features Appendix Connecting y our TV Note: T o prevent equipment damage , do not plug in any pow er cords until you ha v e finished connecting all equipment.
10 Connecting a cable con ver ter bo x or Antenna This tele vision has an e xtended tuning range and can tune most cable channels without using a cable compan y supplied conv er ter bo x. Some cab le companies offer "premium pa y channels" in which the signal is scramb led.
11 Intr oduction Connecting y our TV Setting up y our TV Using the TV’ s Features Appendix Satellite IN S-VIDEO IN OUT VIDEO A UDIO LR OUT VIDEO A UDIO LR IN from ANT CH 3 CH 4 OUT to TV OUT to TV Connecting a DVD player/satellite receiver and a VCR This connection allows you to w atch D VD/satellite, VCR, or TV pro- grams .
12 Y ou will need: • two coaxial cables • one set of standard A/V cables • one set of component video cables • one pair of standard audio cables Connecting a DVD player with ColorStream ® (component video) and a VCR This connection allows y ou to watch D VD , VCR, or TV programs and record TV programs.
13 Intr oduction Connecting y our TV Setting up y our TV Using the TV ’ s Features Appendix Connecting a DTV receiver/set-top box with ColorStream ® (component video) and a VCR This connection allows y ou to watch DTV (digital TV), VCR, and TV programs , and record DTV and TV progr ams.
14 Connecting a camcorder This connection allows y ou to watch videos recorded on a camcorder . Y ou will need: • one S-video cable • one pair of standard audio cables VHS Camcorder Note: F or better picture quality , if your camcorder has S-video, you can use an S-video cable (plus the standard audio cables) instead of a standard video cable.
15 Intr oduction Connecting y our TV Setting up y our TV Using the TV ’ s Features Appendix Connecting an HDMI ™ or a DVI device to the HDMI input T o connect an HDMI device, you will need: • one HDMI cable (type A connector) For proper operation, it is recommended that you use as shor t an HDMI cable as possible .
16 Connecting y our TV Connecting a PC (P ersonal Computer) Before y ou connect this TV to y our PC, change the adjustment of your PC’ s Resolution and Refresh rate.
17 Intr oduction Connecting y our TV Setting up y our TV Using the TV’ s Features Appendix Setting up y our TV Using the remote contr ol Preparing the remote control f or use With the remote control.
18 Programming the remote contr ol f or use with a cable TV con ver ter/satellite receiver , VCR or D VD player This remote control is pre-programmed to oper ate T oshiba satellite receivers , VCRs and D VD players.
19 Intr oduction Connecting y our TV Setting up y our TV Using the TV ’ s Features Appendix Brand Code Brand Code Cable TV converter/satellite receiver, VCR and DVD player code tables [For CBL/SAT M.
20 Brand Code Brand Code VCR (Continued) Brand Code Portland Proscan Proton Quasar Radio Shack Radio Shack/ Realistic Radix RCA Realistic Ricoh Runco Samsung Sansui 012, 013, 015 001, 002, 048 061 045.
21 Intr oduction Connecting y our TV Setting up y our TV Using the TV’ s Features Appendix PO WER tur ns the TV on and off SLEEP programs the TV to tur n off at a set time (page 39) TV/VIDEO selects.
22 Star ting setup The ST AR TING SETUP f eature appears the first time you turn on the TV , and helps you select the menu language, specify the TV/CABLE setting, and program channels automatically . IMPOR T ANT : Make sure that the antenna or cable TV system connection is made! 1.
23 Intr oduction Connecting y our TV Setting up y our TV Using the TV ’ s Features Appendix Adding channels to the TV ’ s memor y When you press CH ▲ or ▼ , y our TV will stop only on the channels you ha ve stored in the TV 's channel memor y .
24 Using the TV’ s features Adjusting the channel settings Switching between tw o channels Y ou can switch between tw o channels without entering an actual channel number each time. T o switch between two channels: 1. Select the first channel you want to view .
25 Intr oduction Connecting y our TV Setting up y our TV Using the TV’ s Features Appendix Note: If you forget your password, press RECALL four times within five seconds from the passw ord entering mode. This allows you to reset your password. Using the LOCKS menu The V -Chip feature is availab le only f or the U.
26 Using the V -Chip (parental control) feature The Motion Picture Association of America (MP AA) uses a rating system to qualify motion picture content. T ele vision broadcasters emplo y a rating system to qualify the content of television prog rams, as well.
27 Intr oduction Connecting y our TV Setting up y our TV Using the TV ’ s Features Appendix Locking the video inputs With the VIDEO LOCK f eature, you can loc k out the input sources (VIDEO1, VIDEO2, COLORSTREAM HD , HDMI, PC) and channels 3 and 4.
28 Buttons to be locked TV top panel TV top panel POWER TV/VIDEO MENU VOLUME CHANNEL MENU VOLUME CHANNEL VOL Using the panel lock f eature Y ou can lock the top panel b uttons to pre vent y our settings from being changed accidentally (by children, f or example).
29 Intr oduction Connecting y our TV Setting up y our TV Using the TV ’ s Features Appendix Selecting the video input sour ce Press TV/VIDEO to vie w a signal from another device connected to your TV , such as a VCR or D VD pla yer .
30 Setting the c loc k Y ou must set the cloc k before y ou can program the ON timer . T o set the clock: (Example: 8:30 AM) 1. Press MENU, then press or to displa y the SETUP menu. 2. Press ▲ or ▼ to highlight CLOCK SET . 3. Press or to highlight the hour position.
31 Intr oduction Connecting y our TV Setting up y our TV Using the TV ’ s Features Appendix Note: After a power f ailure or disconnection of the power , the timer settings will be lost.
32 Vie wing the wide-screen picture formats (480i and 480p signals only) Y ou can view 480i and 480p f or mat programs in a variety of picture sizes—Natural, TheaterWide 1, TheaterWide 2, TheaterWide 3, and Full. The wa y the image displays in any of the picture sizes will v ar y depending on the f ormat of the program you are vie wing.
Intr oduction Connecting y our TV Setting up y our TV Using the TV ’ s Features Appendix 33 Note: Using these functions to change the picture size (i.
34 Scr olling the TheaterWide ® picture (TheaterWide 2 and 3 only) 1. Press PIC SIZE to select the TheaterWide 2 or 3 mode. 2. Press MENU, and then press or until the SETUP menu appears. 3. Press ▲ or ▼ to highlight PICTURE SCROLL. 4. Press or to displa y the Scroll Adjustment mode.
Intr oduction Connecting y our TV Setting up y our TV Using the TV’ s Features Appendix 35 If the signal does not include aspect information, the picture size you selected on pages 32 and 33 is displa yed. T o turn on the ASPECT feature: 1. Press MENU, and then press or until the SETUP menu appears.
36 Adjusting the picture quality Y ou can adjust the picture quality to your personal pref erences, including the brightness, contrast, color , tint, and shar pness. The qualities you choose will be stored automatically in y our TV ’ s memory so you can recall them at an y time.
Intr oduction Connecting y our TV Setting up y our TV Using the TV ’ s Features Appendix 37 Using the TV ’ s Features Selecting the color temperature Change the picture quality by selecting from three preset color tem- peratures — cool, medium, and warm — as descr ibed in the f ollowing table: T o select the color temperature: 1.
38 Using the TV ’ s Features Notes: • If you wish to change the on-screen language, f ollow the steps 1-3 on page 26. • If no buttons are pressed f or more than appro x. 60 seconds, the PC Monitor Menu screen will return to nor mal Monitor screen automatically .
Intr oduction Connecting y our TV Setting up y our TV Using the TV ’ s Features Appendix 39 Setting the sleep timer Y ou can set the TV so it turns off automatically . T o set the sleep timer: Repeatedly press SLEEP on the remote control to set the length of time until the TV turns off.
40 Adjusting the sound quality Y ou can change the sound quality of your TV by adjusting the bass, treble, and balance. T o adjust the sound quality: 1. Press MENU, then press or until the AUDIO menu appears . 2. Press ▲ or ▼ to highlight the item you want to adjust.
Intr oduction Connecting y our TV Setting up y our TV Using the TV’ s Features Appendix 41 Using the StableSound ® feature The StableSound f eature limits the highest volume le vel to pre vent extreme changes in volume when the signal source is changed.
42 OFF OFF OFF OFF HDMI / DVI AUDIO Dolby Virtual WOW SRS 3D FOCUS TruBass HDMI RESET :SELECT :ADJUST Note: Make sure the volume control of your audio amplifier is set to a moderate listening level.
Intr oduction Connecting y our TV Setting up y our TV Using the TV’ s Features Appendix 43 Auto power off The TV will automatically turn off after approximately 15 minutes if it is tuned to a v acant channel or a station that complete s its broadcast for the da y and stops broadcasting on that channel.
44 Appendix T roubleshooting Bef ore calling a ser vice technician, please chec k the f ollowing tab le for a possib le cause of the symptom and some solutions. Symptom Solution TV will not turn on • Make sure the power cord is plugged in, then press PO WER.
Intr oduction Connecting y our TV Setting up y our TV Using the TV ’ s Features Appendix 45 Specifications Notes: • This model complies with the specifications listed below .
46 T oshiba America Consumer P roducts, L.L.C. (“T ACP”) makes the following limited warranties to original consumers in the United States. TH E S E LI M ITE D WARR ANTI E S EXTE N D TO THE OR I G.
Intr oduction Connecting y our TV Setting up y our TV Using the TV ’ s Features Appendix 47 T oshiba of Canada L imited ( “ TC L ” ) makes the following limited warranties to original consumers in Canada.
48 National Service Division TEL.: (905) 470-5400 Service Centers: T OR ONT O: 191 McNABB STREET , MARKHAM, ONT ARIO , L3R 8H2, CANAD A TEL.: (905) 470-5400 MONTREAL: 18050 TRANS CANAD A, KIRKLAND , QUEBEC , H9J-4A1, CANAD A TEL.: (514) 390-7766 V ANCOUVER: 22171 FRASERW OOD W A Y , RICHMOND , B.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba 23HL84 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba 23HL84 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba 23HL84 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba 23HL84 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba 23HL84 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba 23HL84 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba 23HL84 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba 23HL84. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba 23HL84 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
