Benutzeranleitung / Produktwartung 19EL833 des Produzenten Toshiba
Zur Seite of 44
OWNER’S MANUAL 19EL833G 22EL833G DIGIT AL Series.
English - 1 - English Contents Safety Precautions ................................................. 3 Air Circulation ..................................................... 3 Heat Damage...................................................... 3 Mains Supply .
English - 2 - English Using a Conditional Access Module ................. 27 Setting T imers, Setting Date/T ime ........................ 28 T imers ............................................................... 28 Setting Sleep T imer ..............
English - 3 - English Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equip- ment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety .
English - 4 - English Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a stable, level surface that can support the weight of the TV .
English - 5 - English Important safety information WHEN THIS UNIT IS PLUGGED INTO THE W ALL OUTLET , DO NOT PLACE YOUR EYES CLOSE T O THE OPENINGS TO LOOK INT O THE INSIDE OF THIS UNIT . USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MA Y RESUL T IN HAZARDOUS RADIA TION EXPOSURE.
English - 6 - English • Ensure that the unit is suf fi ciently ventilated! Never place it next to or underneath curtains! • This set should only be connected to an 220-240V AC 50Hz mains power supply . Do not attempt to connect it to any other type of supply .
English - 7 - English T o display your LCD TV using a wall bracket If you decide to wall mount your LCD TV , always use a wall bracket appropriate for the size and weight of the LCD TV : (1) Caution: T wo people are required for installation. (2) Unplug and remove any cables and/or other component connectors from the rear of the TV .
English - 8 - English The Remote Control Simple at-a-glance reference of your remote control. Inserting Batteries and Effective Range of the Remote Control Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round.
English - 9 - English Connecting External Equipment Before connecting any external equipment, remove the mains plug from the wall socket. Aerial cable:........................................................... Connect the aerial to the ANT . socket on the rear of the television.
English - 10 - English Connecting an HDMI® or DVI Device to the HDMI Input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.
English - 1 1 - English T o Connect a Computer With either an RGB/PC or an HDMI connection, you can watch your computer ’s display on the television and hear the sound from the television’s speakers.
English - 12 - English Environmental Information This television is designed to consume less energy to save environment. • Y ou not only help to save the environment but also you can save money by reducing electricity bills thanks • to the energy ef fi ciency feature of this TV .
English - 13 - English Controlling the TV A wide variety of external equipment can be connected via the sockets located on the side and back of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the left side of the television may be used for some functions.
English - 14 - English Initial Installation Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television. T o set up the television use the buttons on the remote control as detailed on page 8 .
English - 15 - English Note: Y ou can press MENU button to cancel. After all the available stations are stored, Channel • List will be displayed on the screen. If you like the sort channels, according to the LCN, please select Ye s and then press OK (if available).
English - 16 - English Digital Aerial Manual Search The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.
English - 17 - English Stereo and Bilingual T ransmissions If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time posi- tions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear .
English - 18 - English Viewing Channel List The channel order may be changed to suit your personal preference. Select • Channel List from the main menu and press OK . The following menu will be displayed: Select • Edit Channel List to manage all stored channels.
English - 19 - English Viewing Info Banner Press • i+ button the information screen will appear giving details of the channel and programme currently being viewed. Whenever you change channel, the TV displays the • broadcast picture along with an information banner at the bottom of the screen (available only in DTV mode).
English - 20 - English Language Settings Using this menu you can adjust the preferred language settings. Select • Language from Setup menu and press OK to view this menu. Press the RETURN button on the remote control to exit. Preferred These settings will be used if available.
English - 21 - English Viewing Parental Control Menu Press MENU button and select the Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Parental and press OK to continue: A dialogue box asking for the lock key will be • displayed.
English - 22 - English Con fi guring Picture Settings Y ou can use different picture settings in detail. Y ou can customize current picture mode settings as desired. For example you change items such as, Brightness, Contrast, Colour , Sharpness and Hue.
English - 23 - English Noise Reduction Press MENU button and select picture by using Left or Right button. Press Up or Down to select noise reduction. Sometimes some words or picture elements to become distorted or pixelated. Using the Noise Reduction feature reduces this effect by smoothing out the edges.
English - 24 - English Changing Picture Format Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press the QUICK button and select Picture Zoom . Press OK repeatedly to select between auto, 16:9, subtitle, 14:9, 14:9 zoom, 4:3, panoramic or cinema.
English - 25 - English PC Picture Settings (*) (*) While in VGA/PC mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in VGA/ PC mode.
English - 26 - English Con fi guring Sound Settings Sound settings can be con fi gured according to your personal preferences. Press MENU button and select the Sound icon by using Left or Right button. Press OK button to view Sound Settings menu. Operating Sound Settings Menu Items Press • Up or Down button to highlight a menu item.
English - 27 - English Con fi guring Y our TV’s Settings Detailed settings can be configured to suit your personal preferences. Viewing Settings Menu Press MENU button and select Settings icon by using Left or Right button. Press OK button to view Settings menu.
English - 28 - English The CAM should be correctly inserted, it is • impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted. Connect the TV to the mains supply , switch on and then wait for few moments until the card is activated.
English - 29 - English Con fi guring Source Settings Y ou can enables or disable selected source options. The TV will not switch to the disabled source options when button is pressed. Select • Sources in the Settings menu and press OK button. Press • Up or Down buttons to select a source.
English - 30 - English Backlight This setting controls the backlight level. Select Backlight by pressing Up or Down button. Press Left or Right button to set Backlight to Auto, Medium, Maximum or Minimum. Note: Backlight adjustment is not available when Power Save mode is switched ON .
English - 31 - English Select Standby Search using Up or Down buttons and use Left or Right to set. If the Standby Search is set to to on and the TV is in standby mode, the TV will look for any changes in the saved channels.
English - 32 - English Manual Start T o display Media Browser window, you can press • MENU button on the remote control and then select Media Browser by pressing Left or Right button. Press • OK button to continue. Media Browser menu contents (depending on the contents of your USB drive) will be displayed.
English - 33 - English Viewing JPG Files T o view photo fi les from a USB disk, you can use this menu screen. When you select Photos from Media Browser , available image fi les will be fi ltered and listed on this screen. If you select a subtitle fi le and press OK button, you can select or deselect that subtitle fi le.
English - 34 - English Video Playback When you select V ideos from Media Browser , available video fi les will be fi ltered and listed on this screen. Y ou can use Up or Down button to select a video fi le and press OK button to play a video. If you select a subtitle fi le and press OK button, you can select or deselect that subtitle fi le.
English - 35 - English Analogue T ext Services Before using the text services, the required language region must be chosen. Select • Language from the SETTINGS menu. Press the • Left or Right button to choose the required language region. After the teletext language is selected, press • MENU button to exit.
English - 36 - English Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1360 x 768. The following table is an illustration of some of the typical video display modes. Y our TV may not support different resolutions. Supported resolution modes are listed below .
English - 37 - English Appendix B: A V and HDMI Signal Compatibility (Input Signal T ypes) Source Supported Signals A vailable EXT (SCART) P AL 50/60 O NTSC 60 O RGB 50 O RGB 60 O SIDE A V P AL 50/60 .
English - 38 - English Appendix C: Supported File Formats for USB Mode Media File Extension Format Remarks Video Audio ( Maximum resolution/Bit rate etc. ) Movie .mpg/ .dat/ .vob/ mkv/ MPEG1 MPEG Layer 1/2/3 20Mbit/sec MPEG2 MPEG2 MPEG2-TS H.264-TS EAC3/ AC3 20Mbit/sec MPEG4 PCM/MP3 .
English - 39 - English Speci fi cations and Accessories Broadcast Systems/Channels DVB-T : MPEG2, DVB-T : MPEG4 HD DVB-C: MPEG2, DVB-C: MPEG4 Video Input P AL, SECAM, NTSC 4.
English - 40 - English License Information HDMI, the HDMI logo, and High-De fi nition Multimedia Interface are trademarks or registered trademarks of • HDMI Licensing LLC in the United States and other countries. DVB is a registered trademark of the DVB Project.
English - 41 - English Questions and Answers Questions and Answers Below are the answers to some of the most common queries. For more information, go to www.toshiba.co.uk Q Why is there no sound or picture? Q Why don't the controls of the television work? A Check the television is not in standby mode.
English - 42 - English Questions and Answers Below are the answers to some of the most common queries. For more information go to www.toshiba.co.uk Q Why doesn't the Media Browser feature operate? Q Why when digital subtitles have been selected are they not showing on screen? A Make sure that USB is connected correctly.
"Printed on Recycled Paper" "100% Chlorine free" Please note the telephone number only applies to advanced owner's manual enquiries and not general operation of the TV .
Ein wichtiger Punkt beim Kauf des Geräts Toshiba 19EL833 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba 19EL833 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba 19EL833 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba 19EL833 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba 19EL833 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba 19EL833 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba 19EL833 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba 19EL833. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba 19EL833 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
