Benutzeranleitung / Produktwartung TF 600 PVRc des Produzenten Topfield
Zur Seite of 90
T OPFIELD TF 600 PVRc User Guide Digital Cable Receiv er P ersonal Video Recorder CONAX.
.
Contents iii Contents 1 Introduction 1 1.1 Features ............................... 1 1.2 Controlling the digital r eceiver .................. 2 1.2.1 The front panel ....................... 3 1.2.2 The remote contr ol ..................... 4 1.3 What is common interface? .
iv Contents 3 Preference Settings 17 3.1 Language settings .......................... 1 7 3.2 V ideo and audio settings ...................... 1 9 3.2.1 T elevision standard .................... 1 9 3.2.2 Colour model ........................ 1 9 3.2.
Contents v 5.4 W atching multifeed programme ................. 3 6 5.5 Using time shift ........................... 3 6 5.6 Using picture in pictur e ...................... 3 8 6 Listing Services 39 6.1 Editing the favourite list .....................
vi Contents 7.3.7 T o play back a scrambled recor ding ........... 5 6 7.4 Copying a recor ding ........................ 5 7 7.5 MP3 playback ............................ 5 7 7.6 T ransferring recor ding files .................... 5 8 7.7 Formatting the hard disk .
1 Chapter 1 Introduction The TF 600 PVRc digital receiver is fully compliant with the international Digital V ideo Broadcasting (DVB) standar d, and thus is able to receive digital br oadcasts of that standard. NOTE In general we equate a channel with a frequency .
2 Introduction • Y ou can view information about the current television or radio programme. • Has an electronic pr ogramme guide that provides an overview of scheduled programmes. • Y ou can update the firmware of the digital r eceiver to the latest version which would be provided by the manufac- turer .
1.2 Controlling the digital receiver 3 1.2.1 The front panel The front panel of the digital r eceiver has buttons to control the digital receiver , and specific lamps and a display to indicate its status.
4 Introduction 1.2.2 The remote control 1 2 3 3 4 5 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 1 button switches the digital receiver between standby mode and operation mode. 2 is used to set a sleep timer .
1.2 Controlling the digital receiver 5 13 displays teletext. 14 V .F or mat changes video resolution. See § 3.2.5 for more details. 15 A/R changes aspect ratio. See § 3.2.4 for more details. 16 switches between television services and radio ser- vices.
6 Introduction 28 is used to start fast motion playback. Subsequent presses incr ease the playback speed. 29 is used to start slow motion playback. Subsequent presses change the playback speed. 30 changes the position of sub-picture counter clockwise.
1.3 What is common interface? 7 1.3 What is common interface? Some broadcasts ar e scrambled so that only paid subscribers can enjoy them. Scrambled services can only be viewed with a Conditional Access Module (CAM) and a subscription card belong- ing with the scrambling system.
8 Setup Chapter 2 Setup 2.1 Unpacking Before going any further , check that you have r eceived the following items with your digital receiver . • Remote control unit • T wo batteries for the remote control (AAA 1.5 V) • A copy of this user guide NOTE Accessories may vary according to your local ar ea.
2.2 Safety precautions 9 • The wall outlet should be near the equipment. Do not run an extension lead to the unit. • Do not expose the digital receiver to any moistur e. The digital receiver is designed for use indoors only . Use dry cloth when cleaning the digital receiver .
10 Setup 2.3 Rear panel connections The TF 600 PVRc has a wide range of connections on the back. USB CABLE 1 IN CABLE 1 OUT CABLE 2 OUT AUDI O VIDE O S-VI DEO CABLE 2 IN L R TV VCR S/PD IF 1 2 3 4 5 6 8 9 10 11 13 12 WLAN ANT RS-232 14 HDMI 7 Check what connections your television set has in comparison with the digital receiver .
2.4 Connecting up your digital receiver 11 9 TV Audio and video output socket for the televi- sion set. 10 VCR Audio and video input/output socket for the video cassette recor der or suchlike. 11 HDMI Audio and video output socket for the high definition television set.
12 Setup If you have any problem with your setup or need help, contact your dealer . 2.4.1 Connecting to the broadcasting cable Whatever sort of connection you have be- tween the digital receiver and the television, you need to connect the digital receiver to the broadcasting cable so that it can r eceive digital television services.
2.4 Connecting up your digital receiver 13 Y ou should configure audio and video settings after connecting up the digital receiver . See § 3.2 for detailed description. T o use the HDMI connector If you have a high definition television set, you should use a HDMI cable for best re- sults.
14 Setup T o use the S-V ideo connector NOTE Y ou cannot view high definition video with the S-V ideo connector . Y ou will need to obtain a S-V ideo cable to use the S-V ideo connector . Plug one end of the cable into the S-VIDEO socket on the digi- tal receiver , and plug the other end into the matching socket on your television.
2.5 Switching on for the first time 15 T o enjoy Dolby digital audio, your televi- sion or audio system must be able to decode Dolby digital audio, and you will need to obtain a S/PDIF cable. Plug one end of the cable into the S/PDIF socket on the digi- tal receiver , and plug the other end into the matching socket on your audio system.
16 Setup used batteries. The manufactur er accepts no liability for the damage resulting fr om leaking batteries. NOTE Batteries, including those which contain no heavy metals, may not be disposed of with household waste. Please dispose of used batteries in an environmentally sound manner .
17 Chapter 3 Preference Settings 3.1 Language settings Y ou can select the language in which the menu would be dis- played. In addition to that, you can select which language of au- dio track and of subtitle track should be output. Select the System Setting > Lan- guage Setting menu.
18 Preference Settings Subtitle language Set the 1st Subtitle Language option and the 2nd Subtitle Lan- guage option to your desired languages. When you watch a programme, if the pr ogramme has a subtitle track of the lan- guage that is designated for the 1st Subtitle Language , it will be displayed.
3.2 V ideo and audio settings 19 3.2 V ideo and audio settings Y ou have to configure the video and audio settings appropriately to your television set and other appliances. Select the System Setting > A/V Output Setting menu. Y ou should see a screen like the left figure.
20 Preference Settings digital receiver linked to your television via this connector , you should set the SCART Output option to your desired colour model.
3.2 V ideo and audio settings 21 Y ou can enjoy well both wide-screen pr ogrammes and normal- screen pr ogrammes with your wide-screen television as the above figures show . T o watch normal-screen pr ogrammes in full screen like the left figur e, set the 4:3 Display F or mat option to Full .
22 Preference Settings 3.2.5 High definition television The digital receiver supports various video r esolutions from 576 to 1080. In general a resolution of 720 or mor e is considered high definition. The higher the resolution is, the better quality you can enjoy .
3.3 Local time setting 23 3.3 Local time setting Y ou should set your local time for timer events. Select the System Setting > Time Setting menu. Y ou should see a screen like the left figur e. Y ou can set the clock manually or use the time signal, Green- wich Mean T ime (GMT), carried as part of the digital television broadcast.
24 Preference Settings T able 3.1: T ime offset table Time offset City GMT − 12:00 Eniwetok, Kwajalein GMT − 11:00 Midway Island, Samoa GMT − 10:00 Haw aii GMT − 09:00 Alaska GMT − 08:00 Pac.
3.4 Parental control 25 Select the System Setting > P arental Control menu. Y ou should see a screen like the left figure, and you will be asked your Personal Identifica- tion Number (PIN). The number is initially set to ‘0000’. If you wish to block 15 or above rated programmes, set the Censorship option to 15 (age) .
26 Preference Settings 3.5 Adjusting the on-screen display Y ou can adjust the transparency level of the on-scr een display . Select the System Setting menu and set the OSD T ransparency option as you desire. Its available range is from 0 to 50 per cent.
27 Chapter 4 Service Search After connecting up the digital receiver , you will need to per- form a service search. 4.1 Searching broadcasting services T o perform service search, select the Installation > Ser vice Search menu. Y ou should see a screen like the left figure.
28 Service Search quency option. Symbol Rate stands for data transfer rate, and QAM is a form of modulation used in digital broadcasting. Broadcasting operators send their services in a symbol rate by a modulation method. Perhaps you do not have to specify the Symbol Rate and QAM Mode options since they are seldom changed.
4.3 Clearing the services list 29 Y ou can reset all data of the digital r eceiver . T o do that, select the Installation > F actor y Setting menu, and then you are asked for confirmation.
30 Daily Usage Chapter 5 Daily Usage 5.1 V olume control Use the and buttons to alter the volume to a comfortable level. Y ou may need to adjust the volume on your television set too. T o temporarily switch off the sound, pr ess the button. Press it again to r estore the sound to previous level.
5.2 W atching television 31 On the services list, you can see the service information: • Service number and name • T ransponder information A dollar sign ( $ ) may be marked on some entries, indicating pay service. T o watch pay services, you need the subscription card.
32 Daily Usage • T o add the highlighted service into a favourite group, select the Add to F av option; then the favourite groups will be displayed. Put the highlight bar on a desir ed group and pr ess the OK button.
5.2 W atching television 33 group, put the highlight bar on a desir ed group and press the F3 button. T o create a new gr oup, press the F2 button; then the on-screen keyboar d appears. Enter your desir ed name and save it.
34 Daily Usage When you are not using time shift, if the electr onic programme guide is provided on the curr ent service, you can see the infor- mation about the current and next pr ogrammes with the or button. T o adjust the sound volume in this case, hold down the or button until the sound bar appears and reaches your desired level.
5.3 V iewing electronic programme guide 35 Select a desired page to view by entering its page number with the numeric buttons. Y ou can zoom into a teletext page with the F3 button, and adjust its transparency level with the F4 button.
36 Daily Usage 5.4 W atching multifeed programme Some broadcasts such as sports channels can pr ovide a variety of perspectives on a programme at a same time.
5.5 Using time shift 37 W ith time shift enabled, the following operations are possible: • T o go back in time, hold down the button; to go for- ward, hold down the button. The pr ogress bar is displayed momentarily with a preview window . • Y ou can navigate using the progress bar , refer to § 7.
38 Daily Usage 5.6 Using picture in picture Y ou can watch two services at the same time with one of them presented in a sub-pictur e. W e call this feature pictur e-in- picture. The instructions on how to use the picture-in-pictur e feature are as follows: 1.
39 Chapter 6 Listing Services 6.1 Editing the favourite list Y ou can make your own favourite services list. In fact, you can define multiple favourite services lists, each being a ‘group’ of chosen services. Select the Organizing F av or ites menu.
40 Listing Services Y ou can add up to 30 groups. T o add a group, select the NEW option in the group list; then the on-scr een keyboard appears. See § 6.2 for how to use the on-screen keyboar d. T o rename a gr oup, put the highlight bar on the group entry you want and press the F2 button; then the on-screen keyboard appears.
6.2 How to use on-screen keyboard 41 6.2 How to use on-screen keyboard Y ou can move the highlight key horizontally with the and buttons and vertically with the and buttons. Pressing the OK button on a key enters its let- ter in the input line.
42 Listing Services 1. Plug one end of a RS-232 cable (9 pin D- sub cable) into the RS-232 port on the dig- ital receiver , and the other end into the matching port on the other digital receiver .
43 Chapter 7 Recording and Playing Y ou can recor d two different services while watching another if two of the services are pr ovided through the same transponder The TF 600 PVRc digital receiver has.
44 Recording and Playing 7.1 Recording a programme Once recor ding has started, a symbol like the left figure will be displayed at the top right of the scr een for a few seconds.
7.1 Recording a programme 45 Pressing the button will pause the live show and begin time shifting within the current recor ding even with the Time Shifting option disabled.
46 Recording and Playing T o stop recor ding, press the button; then a box like the left figure appears, which shows programmes curr ently be- ing recor ded. If you select one, its recor ding will stop. While a recor ding is going on, you can watch or recor d another service.
7.1 Recording a programme 47 T o input a timer recor ding, select the Timer Setting menu; then the timer list will be displayed. T o add a new timer event, press the F1 button, and a box like the left figure appears. T ake the following steps: 1.
48 Recording and Playing 5. Set the Date option to a desired date, on which the digital receiver will turn on. The date format is day/month/year- day of the week . Set the Star t Time option to a desired time, at which the recor ding will be started. The time format is hour:minute .
7.1 Recording a programme 49 7.1.3 Scheduling recordings using the programme guide If the electronic pr ogramme guide is properly pr ovided, you can make timer events on it. The instructions on how to make timer recor dings using the elec- tronic pr ogramme guide are as follows: 1.
50 Recording and Playing 1. Press the button to display the progr ess bar. 2. T o move to the beginning of the desired scene, hold down the or button until it is reached. 3. Press the button to start recor ding. The time shift buffer fr om that position onwards will now be recor ded.
7.2 File archive 51 7.2 File archive When a programme is r ecorded, it is stored as a file on the built-in hard disk drive of the digital r eceiver . Y ou can select a recor ding to play back from the recor ded programme list. Select the File List menu or alter- natively press the button to display the recor ded programme list.
52 Recording and Playing 7.2.3 T o lock a recording T o lock a recor ding so that other people cannot play it, perform the following steps: 1. Put the highlight bar on a desired recor ding. 2. Press the F4 button to display the additional options.
7.3 Playing back a recording 53 7.3 Playing back a recording When a programme is r ecorded, its additional contents such as audio tracks or teletext are also r ecorded together . So you can enjoy them while playing back a recor ding. The instructions on how to play a recor ding are as follows: 1.
54 Recording and Playing • T o go forward, hold down the button; to go backward, hold down the button. • T o bookmark a position, refer to § 7.3.4 . • If there ar e no bookmarks, you can jump forward 30 seconds at a time by pressing the F3 button.
7.3 Playing back a recording 55 7.3.4 T o make a bookmark Y ou can mark favourite parts of a recor ding by creating book- marks, and then jump to them. Y ou can have up to 64 book- marks. Bookmarks are stored with the recor ding so that you can use them again afterwards.
56 Recording and Playing 2. Move to the beginning scene of the part you want to play repeatedly by holding down the or button. 3. Press the button, then the pointer starts to blink. 4. Move to the end scene; the part is marked in purple. 5. Press the button again, then the part turns green, and repeated playback starts.
7.4 Copying a recording 57 On the recor ded programme list, a purely gr een $ indicates the recor ding has been wholly descrambled; on the other hand, a yellowish green $ indicates it has been partially descrambled, and a purely yellow $ indicates it has not been descrambled at all.
58 Recording and Playing 2. Put the highlight bar on a desired file; if you want to play several files, select them with the F1 button. 3. Press the OK button to start playback. 4. T o stop playback, press the button.
7.6 T ransferring recording files 59 The instructions on how to use Altair are as follows: 1. Select files to transfer . The left panel shows files and folders that are on the digital r eceiver , while the right panel shows files and folders that are on your computer .
60 Recording and Playing V isit http://www.videolan.org or http://www.elecard.com where you can find a MPEG player able to play them back. If you wish to author DVDs with them, visit http://www. haenlein- software.com where you can find a DVD authoring program able to pr ocess them.
61 Chapter 8 Accessing to The Digital Receiver via The Internet NOTE The following section describes complex functions that should only be used by owners with advanced computer knowledge. TF 600 PVRc provides a web service and FTP service. Y ou can make scheduled recor dings or download recording files to your computer via these services.
62 Accessing to The Digital Receiver via The Internet NOTE The web server and FTP server of the digital receiver don’t work in standby mode. So it must be powered up all the time if you wish to use the web service at any time.
8.1 Configuring the router 63 8.1.2 T o access on the level of the Internet When you are away fr om home, you can access the digital receiver inside your home if your r outer is configured to route access to the digital receiver by means of port forwar ding.
64 Accessing to The Digital Receiver via The Internet 1. Make an account on a web site providing DDNS service, which should be supported by your router .
8.2 Configuring the wireless network settings on the digital receiver 65 8.2 Configuring the wireless network settings on the digital receiver Y ou should configure the WLAN settings to enable the web service and FTP service. Y ou had better refer to the manual of your router for understanding of technical terminology .
66 Accessing to The Digital Receiver via The Internet NOTE Y ou can access the FTP server with an anonymous account. However , with an anonymous account you can only download files.
8.2 Configuring the wireless network settings on the digital receiver 67 Profile T o make profiles for various net- work connections, select the In- stallation > LAN Setting > Pro- file menu. The value of the Country Region option is applied to every profile in common.
68 Accessing to The Digital Receiver via The Internet T o view or edit a profile, choose your desired pr ofile at the Profile Name option and select the Edit Profile item.
8.3 Accessing the web server 69 8.3 Accessing the web server In way of the web server of the digital receiver , you can do the following: • Download recording files. • Create new recor ding timers. • V iew information about the programme curr ently being recor ded.
70 Accessing to The Digital Receiver via The Internet Y ou cannot only download but also upload recor ding files or MP3 files in the File Management page. However , if you wish to download or upload a file of which size is 2 gigabyte or more, it is r ecommended to use the FTP server rather than the web server .
8.4 Accessing the FTP server 71 8.4 Accessing the FTP server Y ou need an FTP client program to access the FTP server of the digital receiver . Y ou can log into the FTP server with the user name and pass- word specified in the WLAN Setting menu. For how to config- ure the WLAN settings, r efer to § 8.
72 Accessing to The Digital Receiver via The Internet NOTE The maximum number of user connections is only one. This means that you cannot access the FTP server while someone else is occupying it.
73 Chapter 9 T opfield Application Program If you are good at pr ogramming with C++ language, you can make a program executable to run on the digital r eceiver . W e call this a T opfield Application program (T AP). In mak- ing a T AP , it is recommended to use Diab compiler of Wind River , whose web site address is http://www.
74 T opfield Application Program T o run a T AP in the digital receiver , perform the following steps: 1. Press the button and then the or button to display the program file list. 2. Place the highlight bar on a file entry you want to run. 3. Press the OK button to start the program.
75 Chapter 10 Firmware Update The digital receiver has a stable and convenient firmwar e to use. However , a new firmware may be released to impr ove the digital receiver . Y ou can get the latest firmware and an update utility which runs on most versions of W indows from the T opfield web site, http://www.
76 Firmware Update NOTE Y ou can only update with firmwares of which system identifi- cation is identical to that of yours. Otherwise you will fail in firmware update. 10.2 From the network via LAN port Y ou can get a new firmware fr om the network via LAN port.
10.3 From your computer via USB port 77 4. When you turn on the digital reciever , the latest firmware will be updated automatically . If your r eceiver has the latest firmware, the firmwar e update will be skipped. 10.2.2 Manual firmware update via LAN port T o update the firmware manually , follow the steps below: 1.
78 Firmware Update 1. Press the Find button to select the new firmware file. 2. Press the do wnload button, and then restart the digital r eceiver to start the file transfer . 3. A countdown will be displayed on screen 4. Restart the digital receiver once more when the file transfer is com- plete.
10.5 From another digital receiver via RS-232 port 79 1. Press the Find button to select the new firmware file. 2. Press the do wnload button, and then turn on the digital receiver to start the file trans- fer . 3. A countdown will be displayed on screen 4.
80 INDEX Index 16:9 , 20 16:9 Display F ormat , 21 1st Audio Language , 18 1st Subtitle Language , 18 2nd Audio Language , 18 2nd Subtitle Language , 18 4:3 , 21 4:3 Display F ormat , 21 802.
81 Every Weekda y , 47 Every Week end, 47 F actor y Setting, 29 File List, 46 , 51 , 53 , 56 File Management, 70 File Name, 48 Find, 78 , 79 Format Hard Disk, 60 F requency, 28 Full, 21 Gatewa y, 65 ,.
82 INDEX S/PDIF, 15 SCART Output, 20 Search Mode, 27 , 28 Service, 47 Service Search, 27 services list, 30 Shared, 68 Shor t Slot Time, 66 Show Provider, 31 Size, 51 Sor ting, 51 Sound Mode, 22 Space,.
.
Correct disposal of this product This marking shown on the product or its literatur e indicates that it should not be disposed with other household wastes at the end of its working life.
Ein wichtiger Punkt beim Kauf des Geräts Topfield TF 600 PVRc (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Topfield TF 600 PVRc noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Topfield TF 600 PVRc - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Topfield TF 600 PVRc reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Topfield TF 600 PVRc erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Topfield TF 600 PVRc besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Topfield TF 600 PVRc verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Topfield TF 600 PVRc. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Topfield TF 600 PVRc gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
