Benutzeranleitung / Produktwartung 222-0950012 des Produzenten Timex
Zur Seite of 28
W223 NA 222-0950012 W223_Analog2_NA_Cvr.qxd 6/5/09 9:37 AM Page cvr1.
English page 2 Français page 54 Español página 114 Português page 170 W223_Analog2_NA_Cvr.qxd 6/5/09 9:37 AM Page cvr3.
TIMEX ® WA TCHES Congratulations on purchasing your TIMEX ® watch. Please read these instructions carefully to understand how to operate your Timex timepiece. Y our watch may not have all of the features described in this booklet. For more information, please visit: Timex.
TABLE OF CONTENTS 2 How to Start Y our Watch 3 Water and Shock Resistance 4 Indiglo ® Night-Light 5 Analog/Digital Models 18 Multi-Function Models 20 Day/Date/AM/PM/Sun/Moon Models 22 Chronograph Mod.
WA TER AND SHOCK RESIST ANCE If your watch is water -resistant, meter marking (WR_M) is indicated. *pounds per square inch absolute WARNING: TO MAINT AIN W ATER-RESISTANCE, DO NOT PRESS ANY BUTTONS OR PULL OUT THE CROWN UNDER W ATER UNLESS Y OUR WA TCH IS INDICATED AS 200 METER WATER- RESISTANT .
ANALOG/DIGITAL MODELS 4-PUSHER ANALOG/DIGITAL MODEL WITH INDIGLO ® NIGHT -LIGHT & NIGHT -MODE ® FEATURE 5 ENGLISH 2. Watch is not a diver watch and should not be used for diving. 3. Rinse watch with fresh water after exposure to salt water . 4. Shock-resistance will be indicated on the watch face or caseback.
DIGITAL DISPLA Y 1) The Digital display changes to each function every time you PRESS pusher “ A ”. (As illustr ated below): TIME / CALENDAR DAIL Y ALARM COUNTDOWN TIMER CHRONOGRAPH DUAL TIME 7 ENGLISH TO USE INDIGLO ® NIGHT -LIGHT 1) PRESS pusher “B” to illuminate the entire dial (Both analog and digital).
• T o view or change the display to TIME, repeat the steps above. NOTE: “ A ” or “P” will appear when the 12-Hour format is selected. • Set this time to coordinate with the Analog time or another time zone. • PRESS and HOLD pusher “C” for 2 seconds in setting mode, to activate fast advance.
NOTE: • When the alarm sounds, it will beep for 20 seconds. • T o stop the alarm beep, PRESS any pusher . • PRESS and HOLD pusher “C” for 2 seconds in setting mode, to activate fast advance.
TO USE COUNTDOWN TIMER 1) PRESS pusher “ A ” to bring up COUNTDOWN TIMER display . “24 HR TR” will appear . 2) PRESS pusher “D” to let hour flash. 3) PRESS pusher “C” to advance hour . 4) PRESS pusher “ A ” to set tens of minutes. 5) PRESS pusher “C” to advance tens of minutes.
TO USE CHRONOGRAPH FOR LAP OR SPLIT TIME MEASUREMENT: 1) PRESS pusher “ A ” to bring up CHRONOGRAPH display; “CH LAP” or “CH SPL ” will appear .
NOTE: 1) While in setting of any mode, if no pusher is pressed for 90 seconds the display will automati- cally return to TIME / CALEND AR mode. 2) While in any mode other than TIME / CALEND AR mode, whenever pusher “C” or “D” is pressed, the next press of pusher “ A ” will automatically return the display to TIME / CALEND AR mode.
TO SET THE TIME 1) Pull crown all the way out and turn to correct time. 2) Push crown in to restart. Note: 24-hour display will set automatically . TO SET THE D ATE Instant date change: 1) Pull crown out one stop and turn CLOCKWISE until you reach correct date.
NOTE: Remember to set time for am or pm (sun or moon). TO SET DA TE: 1) PULL out crown to “B” position. 2) TURN crown clockwise to correct date. 3) PUSH in crown to “ A ” position TO SET DA Y: 1) PULL out crown to “C” position. 2) Advance time 24 hours to change the day .
• The seconds sweep hand shows “seconds elapsed” for chronogr aph TIME, CALENDAR, CHRONOGRAPH This chronograph watch has three functions: TIME TO SET THE TIME: 1) PULL out Crown to “C” posit.
NOTE: PRESSING and HOLDING either pusher “ A ” or “B” will cause the hands to move continually until the pusher is released. STAND ARD CHRONOGRAPH MEASUREMENT: 1) PRESS pusher “ A ” to sta.
SETTING THE DATE 1) PULL the crown out to the 1st position “B”. 2) T urn the crown counter -clockwise to set the date. *If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day . 3) After the date has been set, push the crown back to the normal position “ A ”.
*Do not push crown to normal position while the chronograph second hand returns to zero position. It stops on the way when crown is returned to normal position and its position is recognized as zero position. 29 ENGLISH minute hand, and chronogr aph hour hand return to zero position.
TIME TO SET THE TIME: 1. PULL crown out to “C” position. 2. TURN crown either way to correct time. 3. PUSH crown in to “ A ” position. TO ADJUST TO A NEW TIME ZONE: 1. PULL crown out to “B” position. 2. TURN crown either way to move the hour hand in hour increments.
TO ADJUST CHRONOGRAPH HANDS: 1. PULL crown out to “B” position. 2. PRESS pusher “B” until the hand at the 10 o’clock eye resets to the “30” position. 3. PULL crown out to “C” position. 4. PRESS pusher “ A ” until the chronograph second hand resets to the “0” or “60” or 12-hour position.
NIGHT -MODE ® FEATURE TO USE NIGHT -MODE ® FEATURE: 1. PUSH and HOLD Crown to “D” position for 4 sec- onds to activate NIGHT -MODE ® feature . PRESSING any pusher will cause the INDIGLO ® night-light to stay on for 3 seconds. 2. NIGHT -MODE ® feature will last for 8 hours.
TIME TO SET THE TIME: NOTE: The stopwatch must be stopped and reset to the zero position prior to setting the time. 1. Pull the crown out to position 2. 2. Rotate the crown either direction until the 24-hour , hour , and minute hands display the correct time.
ELAPSED TIME RING If your watch is equipped with a rotatable outer ring on the face, with numbers corresponding to minutes, you can use this Elapsed Time Ring to time an activity from the start, or to mark the ending time for the duration of an activity .
If within the first minute, a distance greater than one mile or kilometer is covered, multiply the tachymeter number by the distance to get the actual rate: if you went 1.
FOLDOVER CLASP BRACELET 1. Find spring bar that con- nects bracelet to clasp . 2. Using a pointed tool, push in spring bar and gently twist bracelet to disengage . 3. Determine wrist size, then insert spring bar in correct bottom hole. 4. Push down on spring bar , align with top hole and release to lock in place.
BA TTER Y Timex strongly recommends that a retailer or jeweler replace battery . If applicable , push reset button when replacing battery . Battery type is indicated on case- back. Battery life estimates are based on certain assumptions regarding usage; battery life may vary depending on actual usage.
do not allow limitations on implied warranties and do not allow exclusions or limitations on damages, so these limi- tations may not apply to you. This warranty gives you spe- cific legal rights and you may also have other rights, which vary from country to country and state to state.
49 Mexico and Central America 01 800 01 06000 (U .S.); Portugal +351 212 555 460; UK, Middle East and Africa +44 20 8687 9620 For other areas , please contact your local Timex retailer or Timex distributor for warranty information. In Canada, the U .S .
Ein wichtiger Punkt beim Kauf des Geräts Timex 222-0950012 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Timex 222-0950012 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Timex 222-0950012 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Timex 222-0950012 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Timex 222-0950012 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Timex 222-0950012 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Timex 222-0950012 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Timex 222-0950012. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Timex 222-0950012 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
